Transferring large amount of data to external drive

Hi I have 6.53GB of Data on my Mac Pro which is for a Windows XP system! I have attached an NTFS formatted 20GB empty external drive to my system via USB. When I pick up my file to transfer to the external drive a transparent 'no entry' logo appears and I cannot drop it onto the external drive. I'm aware of the 4GB limit using the FAT format but the external disk is definitely NTFS. I have considered using a dual layer DVD but would that work if I'm having these problems now? I would far prefer to just copy this to the external drive as DL DVD's are expensive! Any help would be appreciated. Thanks

The issue is that the Mac OS can't write to NTFS drives without 3rd-party software.
This software can do it, but I'm not sure if it's SL compatible yet:
http://www.paragon-software.com/home/ntfs-mac/
There is also NTFS-3G, which is not SL compatible at this time:
http://www.ntfs-3g.org/
~Lyssa

Similar Messages

[SOLVED] Problem transferring large amounts of data to ntfs drive

I have about 150GB of files that I am trying to transfer from my home partition which is ext3 /dev/sdd2 to another partition which is ntfs mounted with ntfs-3g /dev/sde1 (both drives are internal sata). The files are sizes ranging from 200MB to 4GB. When the files start to move they transfer at a reasonable speed (10 to 60MB/s), but will randomly (usually after about 1 to 5GB transfered) slow down to about 500KB/s transfer speed. The computer becomes unusable at this point, and even if I cancel the transfer the computer will continue to be unusable (I must use alt+sysreq REISUB). I have tried transferring with dolphin, nautilus, and the mv command but they all will produce the same results. I have also tried this in dolphin as root with no change. If I leave dolphin running long enough I also get the message "the process for the file protocol died unexpectedly".
There is nothing that I can tell is wrong with the drives, I've run disk checks on both, and checked the S.M.A.R.T. readings for both disks and everything was fine.
My hardware is an intel X58 motherboard, core i7 processor, 6GB of RAM, 5 internal sata drives and 1 internal sata optical drive.
Another thing to note is that every once in a while I will get an error message at boot saying "Disabling IRQ #19".
This is driving me crazy as I have no idea why this is happening and when I search I can't find any solutions that work.
If anybody knows how to solve this or can help me diagnose the problem please help.
Thank you.
Last edited by zetskee (2011-01-07 21:29:58)

Primoz wrote:Do you use KDE (Dolphin) 4.6 RC or 4.5?
Also I've noticed that if i move / copy things with Dolphin they're substantially slower than if I use cp/mv. But cp/mv works fine for me...
Also run Dolphin from terminal to try and see what's the problem.
Hope that help at least a bit.
Could you explain why Dolphin should be slower? I'm not attacking you, I'm just asking.
Cause I thought that Dolphin is just a „little" wrapper around the cp/mv/cd/ls applications/commands.

Looking for ideas for transferring large amounts of data between systems

Hello,
I am looking for ideas based on best practices for transferring Large Amounts of Data in and out of a Netweaver based application.
We have a new system we are developing in Netweaver that will utilize both the Java and ABAP stack, and will require integration with other SAP and 3rd Party Systems. It is a standalone product that doesn't share any form of data store with other systems.
We need to be able to support 10s of millions of records of tabular data coming in and out of our system.
Since we need to integrate with so many different systems, we are planning to use RFC for our primary interface in and out of the system. As it turns out RFC is not good at dealing with this large amount of data being pushed through a single call.
We have considered a number of possible ideas, however we are not very happy with any of them. I would like to see what the community has done in the past to solve problems like this as well as how SAP currently solves this problem in other applications like XI, BI, ERP, etc.

Primoz wrote:Do you use KDE (Dolphin) 4.6 RC or 4.5?
Also I've noticed that if i move / copy things with Dolphin they're substantially slower than if I use cp/mv. But cp/mv works fine for me...
Also run Dolphin from terminal to try and see what's the problem.
Hope that help at least a bit.
Could you explain why Dolphin should be slower? I'm not attacking you, I'm just asking.
Cause I thought that Dolphin is just a „little" wrapper around the cp/mv/cd/ls applications/commands.

Finder issues when copying large amount of files to external drive

When copying large amount of data over firewire 800, finder gives me an error that a file is in use and locks the drive up. I have to force eject. When I reopen the drive, there are a bunch of 0kb files sitting in the directory that did not get copied over. This is happens on multiple drives. I've attached a screen shot of what things look like when I reopen the drive after forcing an eject. Sometime I have to relaunch finder to get back up and running correctly. I've repaired permissions for what it's worth.
10.6.8, by the way, 2.93 12-core, 48gb of ram, fully up to date. This has been happening for a long time, just now trying to find a solution

Scott Oliphant wrote:
iomega, lacie, 500GB, 1TB, etc, seems to be drive independent. I've formatted and started over with several of the drives and same thing. If I copy the files over in smaller chunks (say, 70GB) as opposed to 600GB, the problem does not happen. It's like finder is holding on to some of the info when it puts it's "ghost" on the destination drive before it's copied over and keeping the file locked when it tries to write over it.
This may be a stretch since I have no experience with iomega and no recent experience with LaCie drives, but the different results if transfers are large or small may be a tip-off.
I ran into something similar with Seagate GoFlex drives and the problem was heat. Virtually none of these drives are ventilated properly (i.e, no fans and not much, if any, air flow) and with extended use, they get really hot and start to generate errors. Seagate's solution is to shut the drive down when not actually in use, which doesn't always play nice with Macs. Your drives may use a different technique for temperature control, or maybe none at all. Relatively small data transfers will allow the drives to recover; very large transfers won't, and to make things worse, as the drive heats up, the transfer rate will often slow down because of the errors. That can be seen if you leave Activity Monitor open and watch the transfer rate over time (a method which Seagate tech support said was worthless because Activity Monitor was unreliable and GoFlex drives had no heat problem).
If that's what's wrong, there really isn't any solution except using the smaller chunks of data which you've found works.

Transfer Large Amounts of Data From External to External Drives

I have 4 each 1.5TB USB 2.0 drives that contain music & movies for use in itunes or apple tv. I purchased two 3TB Thunderbolt drives and would like to transfer the data from the 4 each 1.5TB drives to the new 3TB Thunderbolt drives How Do I Do This?
I have tried to copy/paste drag/drop but only so much moves then stops.
All formatting is MAC Journaled

First I just want to say thank you for the suggestion.
There were no errors shown just stopped after several hours, also sleep is turned off. What I started doing is taking lets say approximately 6GB at a time and maybe doing this 4 or 5 times and after about 20 to 30 minutes it is done and I do this all over again.
I will run the disk utility like you suggested and try that again but give or take there are probably 2500 files that are 2+GB in size and then all of the music files we have collected is around 90GB total if not slightly higher.

Extremely Slow USB 3.0 Speeds When Transferring Large Amounts of Video

Hi there,
I am transferring large amounts of footage (250GB-1.75TB chunks) from 5x 5400rpm 2TB drives to 5x 7200rpm 2TB drives simultaneously (via 6x USB 3.0 connections and 4x SATA III, with copy/paste in explorer) and the transfer speeds are incredibly slow. Initially the speeds show up as quite fast (45-150mb/ps+) but then they slow down to around 3mb/ps.
The drives have not been manually defragmented but the vast majority of the files on each are R3D video files.
I am wondering if the amount of drives/data being used/sent is what is causing such slow speeds or if there might be another culprit? I would be incredibly appreciative to learn of any solutions to increase speed significantly. Many thanks...
Specs:
OS: Windows 7 Professional
Processor: i7 4790k
RAM: 32GB
GPU: Nvidia 970 GTX

If the USB ports are all on the same controller, they share their resources, so the transfer rate with 6 ports would be max 1/6-th of the transfer rate with 1 USB port if we disregard the overhead. Add that overhead to the equation and the transfer rate goes down even further. Now take into account the fact that you are copying from slow 5400 RPM disks that effectively max out at around 80 MB/s with these chunks and high latency, add the OS overhead and these transfer rates do not surprise me.

Advice needed on how to keep large amounts of data

Hi guys,
Im not sure whats the best way is to make large amounts of data available to my android app on the local device.
For example records of food ingredients, in the 100's?
I have read and successfully created .db's using this tutorial.
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7d49. html
However to populate the database I use flash? So this kind of defeats the purpose of it. No point in me shifting a massive array of data from flash to a sql database, when I could access the data direct from the as3 array?
So maybe I could create the .db with an external program? but then how would I include that .db in the apk file and then deploy it to users android device.
Or maybe I create a as3 class with an xml object init and use that as a means of data storage?
Any advice would be appreciated

You can use any means you like to populate your SQLite database, including using external programs, (temporarily) embedding a text file with SQL statements, executing some SQL from AS3 code etc etc.
Once you have populated your db, deploy it with your project:
http://chrisgriffith.wordpress.com/2011/01/11/understanding-bundled-sqlite-databases-in-ai r-for-mobile/
Cheers, - Jon -

Is there any way to connect time capsule to a MacBook Pro directly via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...)?

Perhaps via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...? I want to use TimeCapsule as back-up for an archive which is curently stored on a 2 TB WESC HD.

No, you cannot backup via direct usb connection..
But gigabit ethernet is much faster anyway.. are you connected directly by ethernet?
Is the drive you are backing up from plugged into the TC? That will slow it down something chronic.. plug that drive in by its fastest connection method.. WESC sorry I have no idea. If ethernet use that.. otherwise USB direct to the computer.. always think what way the files come and go.. but since you are copying from the computer everything has to go that way.. it makes things slower if they go over the same cable.. if you catch the drift.

Couldn't copy large amount of data from enterprise DB to Oracle 10g

Hi,
I am using i-batis to copy data from enterprise DB to oracle and viceversa.
The datatype of a field on EDB is 'text' and the datatype on oracle is 'SYS.XMLTYPE'
i am binding these to a java string property in a POJO to bind values.
I could successfully copy limited amount of data from EDB to oracle but if there is more data, i am getting the following exceptions with different oracle drivers ( but i could read large amount of data from EDB):
--- Cause: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeUpdate(MappedStatement.java:107)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.update(SqlMapExecutorDelegate.java:457)
at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.update(SqlMapSessionImpl.java:90)
at com.ibatis.sqlmap.engine.impl.SqlMapClientImpl.update(SqlMapClientImpl.java:66)
at com.aqa.pojos.OstBtlData.updateOracleFromEdbBtlWebservice(OstBtlData.java:282)
at com.aqa.pojos.OstBtlData.searchEdbAndUpdateOracleBtlWebservice(OstBtlData.java:258)
com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in com/aqa/sqlmaps/SQLMaps_OSTBTL_Oracle.xml.
--- The error occurred while applying a parameter map.
--- Check the updateOracleFromEDB-InlineParameterMap.
--- Check the parameter mapping for the 'btlxml' property.
--- Cause: java.sql.SQLException: setString can only process strings of less than 32766 chararacters
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeUpdate(MappedStatement.java:107)
at com.iba
I have latest oracle 10g jdbc drivers.
remember, i could copy any amount of data from oracle to EDB but not otherway around.
PLease let me know if you have come across this issue, any recommendation is very much appreciated.
Thanks,
CK.

Hi,
I finally remembered how I solved this issue previously.
The jdbc driver isn't able to directly call the insert with a column xml_type. The solution I was using was to build a wrapper function in plSQL.
Here it is (for insert but I suppose tha update will be the same)
create or replace procedure insertXML(file_no_in in number, program_no_in in varchar2, ost_XML_in in clob, btl_XML_in in clob) is
begin
insert into AQAOST_FILES (file_no,program_no,ost_xml,btl_xml) values(file_no_in, program_no_in, xmltype(ost_XML_in), xmltype(btl_XML_in));
end insertXML;
here is the sqlmap file I used
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE sqlMap
PUBLIC "-//ibatis.apache.org//DTD SQL Map 2.0//EN"
"http://ibatis.apache.org/dtd/sql-map-2.dtd">
<sqlMap>
     <typeAlias alias="AqAost" type="com.sg2net.jdbc.AqAost" />
     <insert id="insert" parameterClass="AqAost">
          begin
               insertxml(#fileNo#,#programNo#,#ostXML:CLOB#,#bltXML:CLOB#);
          end;
     </insert>
</sqlMap>
an here is a simple program
package com.sg2net.jdbc;
import java.io.IOException;
import java.io.Reader;
import java.io.StringWriter;
import java.sql.Connection;
import oracle.jdbc.pool.OracleDataSource;
import com.ibatis.common.resources.Resources;
import com.ibatis.sqlmap.client.SqlMapClient;
import com.ibatis.sqlmap.client.SqlMapClientBuilder;
public class TestInsertXMLType {
     * @param args
     public static void main(String[] args) throws Exception {
          // TODO Auto-generated method stub
          String resource="sql-map-config-xmlt.xml";
          Reader reader= Resources.getResourceAsReader(resource);
          SqlMapClient sqlMap = SqlMapClientBuilder.buildSqlMapClient(reader);
          OracleDataSource dataSource= new OracleDataSource();
          dataSource.setUser("test");
          dataSource.setPassword("test");
          dataSource.setURL("jdbc:oracle:thin:@localhost:1521:orcl");
          Connection connection=dataSource.getConnection();
          sqlMap.setUserConnection(connection);
          AqAost aqAost= new AqAost();
          aqAost.setFileNo(3);
          aqAost.setProgramNo("prg");
          Reader ostXMLReader= Resources.getResourceAsReader("ostXML.xml");
          Reader bltXMLReader= Resources.getResourceAsReader("bstXML.xml");
          aqAost.setOstXML(readerToString(ostXMLReader));
          aqAost.setBltXML(readerToString(bltXMLReader));
          sqlMap.insert("insert", aqAost);
          connection.commit();
     public static String readerToString(Reader reader) {
          StringWriter writer = new StringWriter();
          char[] buffer = new char[2048];
          int charsRead = 0;
          try {
               while ((charsRead = reader.read(buffer)) > 0) {
                    writer.write(buffer, 0, charsRead);
          } catch (IOException ioe) {
               throw new RuntimeException("error while converting reader to String", ioe);
          return writer.toString();
package com.sg2net.jdbc;
public class AqAost {
     private long fileNo;
     private String programNo;
     private String ostXML;
     private String bltXML;
     public long getFileNo() {
          return fileNo;
     public void setFileNo(long fileNo) {
          this.fileNo = fileNo;
     public String getProgramNo() {
          return programNo;
     public void setProgramNo(String programNo) {
          this.programNo = programNo;
     public String getOstXML() {
          return ostXML;
     public void setOstXML(String ostXML) {
          this.ostXML = ostXML;
     public String getBltXML() {
          return bltXML;
     public void setBltXML(String bltXML) {
          this.bltXML = bltXML;
I tested the insert and it works correctly
ciao,
Giovanni

Streaming large amounts of data of socket causes corruption?

I'm wrinting an app to transfer large amounts of data via a simple client/server architecture between two machines.
Problem: If I send the data too 'fast', the data arrives corrupted:
- Calls to read() returns wrong data (wrong 'crc')
- Subsequent calls to read() do not return -1 but allow me to read e.g. another 60 or 80 KBytes.
- available() returns always '0'; but I'll get rid of that method anyway (as recommended in other forum entries).
The behaviour is somewhat difficult to repeat, but it fails for me reliably when transferring the data between two separate machines and when setting the number of packets (Sender.TM) to 1000 or larger.
Workaround: Reduce number of packages send to e.g. 1; or intruduce the 'sleep' on the Sender side. Another workaround: Changing alone to java.nio.* did not help, but when I got rid of the Streams and used solely ByteBuffers, the problem disappeared. Unfortunately the Streams are required by other parts of my application.
I'm running the code on two dual-CPU machines connected via
Below are the code of the Sender and the Listener. Please excuse the style as this is only to demonstrate the problem.
import java.io.IOException;
import java.io.OutputStream;
import java.net.InetSocketAddress;
import java.nio.channels.Channels;
import java.nio.channels.SocketChannel;
import java.util.Arrays;
public class SenderBugStreams {
    public static void main(String[] args) throws IOException {
        InetSocketAddress targetAdr = new InetSocketAddress(args[0], Listener.DEFAULT_PORT);
        System.out.println("connecting to: "+targetAdr);
        SocketChannel socket = SocketChannel.open(targetAdr);
        sendData(socket);
        socket.close();
        System.out.println("Finished.");
    static final int TM = 10000;
    static final int TM_SIZE = 1000;
    static final int CRC = 2;
    static int k = 5;
    private static void sendData(SocketChannel socket) throws IOException {
        OutputStream out = Channels.newOutputStream(socket);
        byte[] ba = new byte[TM_SIZE];
        Arrays.fill(ba, (byte)(k++ % 127));
        System.out.println("Sending..."+k);
        for (int i = 0; i < TM; i++) {
            out.write(ba);
//            try {
//                Thread.sleep(10);
//            } catch (InterruptedException e) {
//                // TODO Auto-generated catch block
//                e.printStackTrace();
//                throw new RuntimeException(e);
        out.write(CRC);
        out.flush();
        out.close();
import java.io.IOException;
import java.io.InputStream;
import java.net.InetSocketAddress;
import java.nio.channels.Channels;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
public class ListenerBugStreams {
    static int DEFAULT_PORT = 44521;
     * @param args
     * @throws IOException
    public static void main(String[] args) throws IOException {
        ServerSocketChannel serverChannel = ServerSocketChannel.open();
        serverChannel.socket().bind(new InetSocketAddress(DEFAULT_PORT));
        System.out.print("Waiting...");
        SocketChannel clientSocket = serverChannel.accept();
        System.out.println(" starting, IP=" + clientSocket.socket().getInetAddress() +
            ", Port="+clientSocket.socket().getLocalPort());
        //read data from socket
        readData(clientSocket);
        clientSocket.close();
        serverChannel.close();
        System.out.println("Closed.");
    private static void readData(SocketChannel clientSocket) throws IOException {
        InputStream in = Channels.newInputStream(clientSocket);
        //read and ingest objects
        byte[] ba = null;
        for (int i = 0; i < SenderBugStreams.TM; i++) {
            ba = new byte[SenderBugStreams.TM_SIZE];
            in.read(ba);
            System.out.print("*");
        //verify checksum
        int crcIn = in.read();
        if (SenderBugStreams.CRC != crcIn) {
            System.out.println("ERROR: Invalid checksum: "+SenderBugStreams.CRC+"/"+crcIn);
        System.out.println(ba[0]);
        int x = in.read();
        int remaining = 0;
        while (x != -1) {
            remaining++;
            x = in.read();
        System.out.println("Remaining:"+in.available()+"/"+remaining);
        System.out.println(" "+SenderBug.TM+" objects ingested.");
        in.close();
}

Here is your trouble:
in.read(ba);read(byte[]) does not read N bytes, it reads up to N bytes. If one byte has arrived then it reads and returns that one byte. You always need to check the return value of read(byte[]) to see how much you got (also check for EOF). TCP chops up the written data to whatever packets it feels like and that makes read(byte[]) pretty random.
You can use DataInputStream which has a readFully() method; it loops calling read() until it gets the full buffer's worth. Or you can write a little static utility readFully() like so:
    // Returns false if hits EOF immediately. Otherwise reads the full buffer's
    // worth. If encounters EOF in mid-packet throws an IOException.
    public static boolean readFully(InputStream in, byte buf[])
        throws IOException
        return readFully(in, buf, 0, buf.length);
    public static boolean readFully(InputStream in, byte buf[], int pos, int len)
        throws IOException
        int got_total = 0;
        while (got_total < len) {
            int got = in.read(buf, pos + got_total, len - got_total);
            if (got == -1) {
                if (got_total == 0)
                    return false;
                throw new EOFException("readFully: end of file; expected " +
                                       len + " bytes, got only " + got_total);
            got_total += got;
        return true;
    }

How can I copy large amount of data between two HD ?

Hello !
Which command could I user to copy large amount of data between two hard disk drives ?
How Lion identify the disk drives when you want to write some script, for example in Windows I sue
Robocopy D:\folder source\Files E:\folder destination
I just want to copy files and if the files/folders exist in destination the files should be overwritted.
Help please, I bougth my first MAC 4 days ago.
Thanks !

Select the files/folders on one HD and drag & drop onto the other HD. The copied ones will overwrite anything with the same names.
Since you're a newcomer to the Mac, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual,
Snow Leopard Edition.&
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Large Amount of Data in JSF

Hello,
I am using the Table Group component for displaying data in my application designed in Java Studio Creator.
I have enabled paging on the component. I use CachedRowSet on the bean for the page for getting the data. This works very well at the moment in my development environment. At the moment I am testing on small amount of data.
I was wondering how does this component perform with very large amounts of data (>75,000 rows). I noticed that there is a button available for users to retrieve all the rows. So I was wondering apart from that instance, when viewing in a paged mode does the component get all the results from the database everytime ?
Which component would be best suited for displaying large amounts of data in a table format?
Thanks In Advance!!

Thanks for your reply. The table control that I use does have paging as a feature and I have enabled it. It still takes time to load the data initially.
I wonder if it is got to do with the logic of paging. How do you specify which set of 20 records to extract from SQL.
Thanks for your help!!

Open Large amount of data

Hi
I have a file on application server in .dat format, it contains large amount of data may be 2 million of records or more, I need to open the file to check the record count, is there any software or any option to open the file, I have tried opening with Notepad, excel .... it gives error..
please let me know
Thanks

Hi,
Try this..
Go to AL11..
Go to the file directory..Then in the file there will be field called length..which is the total length of the file in characters..
If you know the length of a single line..
Divide the length of the file by the length of single line..I believe you will get the number of records..
Thanks,
Naren

Bex Report Designer - Large amount of data issue

Hi Experts,
I am trying to execute (on Portal) report made in BEx Report Designer, with about 30 000 pages, and the only thing I am getting is a blank page. Everything works fine at about 3000 pages. Do I need to set something to allow processing such large amount of data?
Regards
Vladimir

Hi Sauro,
I have not seen this behavior, but it has been a while since I tried to send an input schedule that large. I think the last time was on a BPC NW 7.0 SP06 system and it worked OK. If you are on a recent support package, then you should search for relevant notes (none come to mind for me, but searching yourself is always a good idea) and if you don't find one then you should open a support message with SAP, with very specific instructions for recreating the problem from a clean input-schedule.
Good luck,
Ethan

Error in Generating reports with large amount of data using OBIR

Hi all,
we hve integrated OBIR (Oracle BI Reporting) with OIM (Oracle Identity management) to generate the custom reports. Some of the custom reports contain a large amount of data (approx 80-90K rows with 7-8 columns) and the query of these reports basically use the audit tables and resource form tables primarily. Now when we try to generate the report, it is working fine with HTML where report directly generate on console but the same report when we tried to generate and save in pdf or Excel it gave up with the following error.
[120509_133712190][][STATEMENT] Generating page [1314]
[120509_133712193][][STATEMENT] Phase2 time used: 3ms
[120509_133712193][][STATEMENT] Total time used: 41269ms for processing XSL-FO
[120509_133712846][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica closed.
[120509_133712846][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Times-Roman closed.
[120509_133712848][][PROCEDURE] FO+Gen time used: 41924 msecs
[120509_133712848][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[120509_133712850][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[120509_133712850][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=496MB, total=496MB, free=121MB
[120509_133818606][][EXCEPTION] java.net.SocketException: Socket closed
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:99)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.ChunkOutput.write(ChunkOutput.java:304)
at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:139)
at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:169)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105)
at oracle.apps.xdo.servlet.util.IOUtil.readWrite(IOUtil.java:47)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:280)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:82)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:562)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:265)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
at oracle.apps.xdo.servlet.XDOServlet.doPost(XDOServlet.java:201)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:97)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
It seems where the querry processing is taking some time we are facing this issue.Do i need to perform any additional configuration to generate such reports?

java.net.SocketException: Socket closed
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:99)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
     at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
     at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
     at weblogic.servlet.internal.CharsetChunkOutput.implWrite(CharsetChunkOutput.java:396)
     at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:198)
     at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:139)
     at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:169)
     at com.tej.systemi.util.AroundData.copyStream(AroundData.java:311)
     at com.tej.systemi.client.servlet.servant.Newdownloadsingle.producePageData(Newdownloadsingle.java:108)
     at com.tej.systemi.client.servlet.servant.BaseViewController.serve(BaseViewController.java:542)
     at com.tej.systemi.client.servlet.FrontController.doRequest(FrontController.java:226)
     at com.tej.systemi.client.servlet.FrontController.doPost(FrontController.java:128)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:17
(Please help finding a solution in this issue its in production and we need to ASAP)
Thanks in Advance
Edited by: 909601 on Jan 23, 2012 2:05 AM

Transferring large amount of data to external drive

Similar Messages

Maybe you are looking for