Transferring of nmaterial from ECC to CRM using middleware tool (R3AC1)
Hello Forum,
I need to transfer material from ECC to CRM where MARA-MTART = 'ZAWA'
In CRM MARA table do not exist.
I need help in transferring data from ECC to CRM using R3AC1 .
This transaction is not in ECC but it is in CRM.
Thanks & Regards
Lovleen
Hello Lovleen,
In transaction R3AC1 you can define the filters for the adapter object MATERIAL.
THen you can do an initial load for this object via txn. R3AS which'll download materials from ECC to CRM.
Thnx.
Similar Messages
-
Transfer z-table data from ECC to CRM via Middleware
Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
AndréHi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta -
When transferring HR data from ECC to CRM via change pointers
When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
paricularly the last name and first name of BUT000
Do you have any idea why this could be happening
Thanks in advanceHi Kittu,
Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
use this links kittu.
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Creating a change pointer and subsequently triggering an IDOC
thanks
karthik -
Can we download employee data from ECC to CRM using standard middleware?
HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PVStandard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda -
Transferring ORg Data From ECC to CRM
Hi,
An ORg structure was maintianed manually in our CRM system. Without deleting the strucutre we tried to generate the ORg strucutre from ECC using the program CRMC_R3_ORG_GENERATE .
Now it created problems and our products and business partners are not picking up the Sales Org Data.
When we tried to regenerate the org using CRMC_R3_ORG_GENERATE a dump error is observed.
We tried deleting the org strucutre using report rhrhdl00 but it didnt worked.
Can you guys help us in bringing the Sales Org Data from the ECCHello Vijay,
you can delete the complete org structure in order to copy it again
from the R/3. For that please use report RHRHDL00 to completely
delete all org units.
Enter "O" for object type and the number of your root org unit as ID.
Enter "ORGEH" as evaluation path and execute the program (you can first
check what will happen by leaving the "test" flag set). Kindly refer
to the documentation attached to this report in trx. SE38. You should
repeat this for all other root org units.
Unfortunately this report does not delete the corresponding Business
partners created in role Organisational unit, but they can be deleted
by means of trx. BUPA_DEL.
With report RHCHECKRELATIONS you might delete evetualy remained
relations for these objects.
Before reprocess report CRMC_R3_ORG_GENERATE you need to
refresh the buffer(before note 696229, generated records were
considered as already saved in PPOMA_CRM).
For example this report could be :
REPORT CRM_ORGMAN_R3_ORGDATA_DEL_GEN.
DATA: lv_answer TYPE char1.
START-OF-SELECTION.
popup to confirm
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
defaultoption = 'N'
titel = text-001
textline1 = text-002
IMPORTING
answer = lv_answer.
IF lv_answer = 'J'.
refresh buffer
DELETE FROM DATABASE indx(st) ID 'KEY'.
ENDIF.
Execute this report and then CRM org data could be created via
trnasaction CRMC_R3_ORG_GENERATE
Regards, Gerhard -
By using middleware how data can be passed from ecc to crm?
By using middleware how data can be passed from ecc to crm?
Hello,
If middleware setup is done for the data exchange between ECC and CRM, then you can use customizing objects
(available in txn R3AC3) and business objects (available in txn R3AC1) , and condition/pricing related objects in available in txn R3AC5, which can be used for extracting data from R/3 to CRM. You can also find some upload objects for uploading the data
from CRM to R/3.
You can use transaction R3AS, to perform the initial load of customizing/Biz objects.
Once initial load is done, any delta changes would come automatically to CRM by means of delta load.
You also have request load, using which you can download range of materials/BPs which are missing or needs to be updated in CRM.
If you have any specific questions, let me know.
Hope this helps!
Best Regards,
Shanathala Kudva. -
Issue with Replication of Bank Account Numbers from ECC to CRM.
Hi,
I am trying to transfer business partners from ECC to CRM, I see errors in SMW01, stating that Bank Key is not valid for US, I have then performed the Initial load for DNL_CUST_BNKA to tranfer Bank Master Data, but again getting error but this time on BANK ACCOUNT NUMBER. How do I transfer the BANK ACCOUNT NUMBER of Business Partners from ECC to CRM. Before starting the initial load for BUPA_MAIN do I need to run any other Initial load to move the BANK ACCOUNT NUMBERS to CRM?
I have already moved Bank Master data using DNL_CUST_BNKA, but can't able to replicate BANK ACCOUNT NUMBERS, can someone please provide me some steps which I need to perform to tranfer BANK ACCOUNT NUMBER.
Now when I ran the initial load for BUPA_MAIN , all Business partners which do not have BANK ACCOUNT NUMBERS are replicated successfully but the one which have Bank Details did not got transferred and gave errors for BANK ACCOUNT NUMBER, Please provide some suggestions.
Thanks.
JenniferWillie,
Thanks for the reply:
Error: BANK ACCOUNT NUMBER ******8547 is not valid
Support pack level:
SAP_ABA 701 0003
SAP_BASIS 701 0003
BBPCRM 700 0002
Thanks.
Jennifer -
Replication of CUSTOMER from ECC to CRM
Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank youHi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM -
Downloading Material Master data from ECC to CRM
Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.
Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components SAP Products Basic Settings Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management Transactions Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty -
Customer classification data from ECC to CRM
Dear Friends,
We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
Thanks,
Rajinikanth GAdded new fields using AET and did Middleware enhancements as per the note - Note 736595 - Exchange of EEW fields with R/3 customer master.
Thanks,
Rajinikanth G -
Integrating Data From ECC to CRM
Hi Experts,
My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
Problem: to map the data from ecc to CRM , I am supposed to call this RFC Fm ( existed in CRM side) from ECC using RFC Destination.
to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
Thanks & Regards.
Naga Priyanka. T
Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AMHi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde -
Organization data from ECC to CRM
Hi Experts,
We need to download organization data from ECC to CRM, and our requirement is to download two different kinds of org structures, sales org structure and HR org structure. Could you please advise whether this is possible in the system and also if it is possible please advise how to download this.
Currently we are using ALE to download employees into CRM and transporting org structure in CRM systems from golden client.
Thanks&Regards,
Kumar.Hi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde -
How to get customers have blank Juristriction code from ECC to CRM?
Hi,
We have recently implemented CRM in our organization. We are planning to bring customers where they dont have region/country maintained i.e., they dont have juristriction codes maintained but still how could we get those customers from ECC to CRM system? we are at BBPCRM/600now.
Do we have to import any OSS note? Please advise.
thank you,
AnilHi ,
you can also check with standard program like :
program;-
SMOF_REQUESTN- to start CRM Request
SMOF_MONITOR_SMOFRSTAT- Monitor Request
these function module you can check:-
SMOF_START_DOWNLOAD_OR_REQUEST-Initialialize object for initial download in table smof_dstat
Functionality-Start a Download or a request. Is called from transaction R3AS
transaction :
R3AR3:- Monitor Requests
Hope it will useful.
thanks
Hemant ghiya -
How to Assigning the company code to the billing units from ecc to crm
Hi,
Iam doing the roll out project , i require the help.
can any one suggest me how to assign the company code to the billing units from ecc to crm.
Thanks
MustafaHi Mustafa
You can load this data from R/3 to CRM by going to transaction R3AS in your CRM system, and using load objects EQUIPMENT, MATERIAL, and CUSTOMER_MAIN.
Best Regards
Gavin -
Error in Initial Load of Products from ECC to CRM
Hi ,
Im getting below errors In initial load of MATERIAL from ECC to CRM.
<b>Data cannot be maintained for set type COMM_PR_MAT
Data cannot be maintained for set type COMM_PR_UNIT
Data cannot be maintained for set type COMM_PR_SHTEXT</b>
<b>My Analysis is</b>
I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
<b>Required Solution</b>
Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
Regards,
Prasad
Message was edited by:
SAP CRMHi there,
Try to attach the Set Types:
"COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
to the Category "MAT_" and then run the Initial load again.
It should work now unless you have some other issues.
Best regards,
Pankaj S.
Maybe you are looking for
-
Pdf file merging in Apex 4.0
Hi guys, is there any way of merging different Pdf files together in Apex 4.0? It seems the BI Publisher can generate PDF files but how about merging them together to form 1 single file? Is it possible with any particular plugin?
-
Cannot update Global Password Policies, no SSL bind, etc
Hello Community-- This is day 3 of the Apple Server Hostage Crisis, and it looks like I'll started clean slate build #5. By way of background, I had a functioning ML/2.2.2 server that had RAID problems (and still does). Attempting to rebuild array f
-
I downloaded an album last night from iTunes. This morning i noticed it was in my music on my iPhone. I have the auto Sync turned off. How did this happen?
-
Banner not lined up quite right
Again, a basic problem. If you could go to my webpage at: http://www.trojanbeach.com you will see a banner at the top that is a jpeg, 1000 pixels wide. If you click on the Details link on that main page, it will take you to Page 2, which shifts about
-
IPad2 not displaying some sites correctly
In Safari, two sites are not displayed correctly on my iPad 2. On dpreview the messages (threads) are not shown as they usually are. And in Apple Fourms the list of categories such as iPad, iPod, Safari, Mac OS etc. How can I return these sirptes to