Transferring OS X Server From Mac Mini Server To Mac Pro

Hi,
A few months ago, I bought a Mac Mini Server for my business. We've now got a Mac Pro that we'd love to install OS X Server onto, and then install Snow Leopard onto the Mac Mini Server (thus making it, in effect, an optical drive-less Mac Mini) for a few reasons I won't go into here.
I thought it might be as simple as to put the OS X Server disc into the Mac Pro, install and then migrate the settings across, and then format the Mac Mini Server and install Snow Leopard. But when I put the CD into the Mac Pro, I got a message saying that OS X Couldn't Be Installed On This Computer.
Is the OS X Server disc that comes with the Mac Mini Server tied to the Mac Mini itself? Can it not be transferred? Even if we retain ownership of both machines, and have a valid license for Snow Leopard to be installed onto the Mac Mini Server? Or is this error message relating to something else?
Thanks in advance,
phil

Try to put the MacPro in FireWire target disk mode and install the OS, or take the disk out and using an enclosure install. Do not clone, it will probably fail due to hardware differences. Try new installation not being plugged in the same network as the mini, setup DNS and transfer OD archive and other settings from the mini.
Regards
Kostas

Similar Messages

  • Use Thunderbolt cable to transfer files from a mac to a Mac Mini Server

    I want to transfer a large document folder of files from a MacBook Pro (MBP) to a Mac Mini Server (MMS) using Thunderbolt-to-Thunderbolt cable.  How?
    Currently both the MBP and MMS are on the same Wireless-N network.
    Obviously the Mac Mini Server cannot be booted in Target-Drive mode because there are other users using it as a server.
    Both computers installed OS X Mavericks 10.9.1.

    Update:
    Thunderbolt Bridge is the ultimate solution (on OS X Mavericks 10.9.1).  It gives amazing speed transferring files without downtime on the source and target computers (in my case the MacBook Pro and the Mac Mini Server).  Up to 7 times faster in writing and 30 times faster in reading than Wireless N!
    My Settings:  Systems Preferences > Network > Set Service Order ... and drag the Thunderbolt Bridge as the top Service (and thus above Ethernet and Wi-Fi), click OK and Apply.  I only set it on the source computer (MacBook Pro) but you may try to set both. 
    Then connect the two computers with the Thunderbolt-to-Thunderbolt Cable and wait for about 15 seconds till they get the Self-Assigned IP addresses.  From the Network Preferences page, you'll see the Thunderbolt Bridge rises to the top on BOTH computers.  (The button remains amber, not green.  It's okay.) Then you can start file transfer from the source computer (e.g. using Finder or an app such as TuneSpan to locate the target location on the target computer).
    To play save, I use BlackMagic to test the connection speed before starting the real transfer.  I found that sometimes I don't need to turn off the WiFi on the source computer (MacBook Pro) but turning WiFi off on the source computer gives me a peace in mind.
    See what I got:
    From the Thunderbolt Bridge:
    From WiFi using Airport Time Capsule 802.11ac on Wireless-N:
    Note: After you finished the file transfer, Turn back on the Wi-Fi and Eject the target folder from the source computer before unplugging the Thunderbolt-to-Thunderbolt cable.

  • HT204350 I,m going to change my Mac mini server and time capsule at the same time what's the best way to transfer from both of my old machines

    I've just purchased a new Mac mini server and also a new time capsule is there any easy way to ghost or transfer the new machines at the same time or is it best to do one at a time?

    I have no direct experience transferring a TC and computer at the same time, but prudence tells me to do one, test to be sure it is correct only then do the other. It will take twice as long from process start to finish, but avoids any nasty surprises at process end. In close to 40 years experience, I have never seen a "crash conversion" (everything at the same time) that did not have at least one major disaster. I am sure it can happen but the odds are heavily against it. Patience is a virtue!

  • How can I create RAID 1 on Mac mini server just now from box.

    I bought my Mac mini server two days ago and decided that 1Tb + 1Tb HDD are very good for RAID 1 (mirroring).
    Thinking - doing ... Open Disk Utility, try to change and create RAID. Nothing. Try to reinstall OS X - recovery part are on disk all time.
    Does anybody can help me to create what I want and how to do this with minimum energy. Thanks a lot.

    Start from an Internet Recovery which boots you into it's own Recovery Partition. From there use Disk Utility to put your 2 drives into RAID 1. Reinstall OS X from the Internet Recovery once you have done that and install everything else as you need to.
    Be aware that RAID volumes do not have their own Recovery Partition so you will need to either have an external drive with an RP to boot into else you will need to use Internet Recovery each time (which is around a 650MB download).

  • Mac mini server refuses to get DHCP address from router

    Everything was going along fine. But after a power outage the server goes to a 169. address when the router puts out 198. addresses. If I put a static 198. address in it sees the network but won't connect to the internet. I've flashed the router (everything else sees the router fine, 3 computers and a time capsule). I've had the hardware checked at the Apple store - it picked up an address right away. After narrowing everything down the problem has to be in the operating system. I even did a full time machine restore to the day before the storm. No luck. Anyone heard of this problem.

    Mauricette has a point.
    A server function is not designed to accept a floating or dynamic IP address.  If that is the case, how do you create firewall rules that prevent those unnnecessary ports being left opened from being attacked by rogue machines in Romania and China on a hourly basis when you announce to the world that your server is available if the server IP address keep changing due to the DHCP lease change?  Yes, they do have bots that do this VERY EFFICIENTLY!
    By changing the very nature of your firewall rules by working with DHCP, you are opening ports you do not know to accommodate DHCP dynamic addressing, which was the reason why your Mac Mini Server stopped working in the first place.  It's ok for a client, since a client isn't serving any files to any one right.
    By using client based firewall rules, you are exposing your server to attacks and when they get through your Mini server, which they can if they are persistent, they get into your home network and then whatever file server services you have opened and unprotected at the time WILL BE copied by these people easily. 
    I have a client once who did just that.  She was attacked, the hacker went through her network like a rampaging bull.  They were from China.  My Synology RAID server gets this attack all the time, but I have a well establish IDS system and the Synology RAID has logs that tracks attacks.
    For a server setup.  Use static IP and then build a strong firewall around it and protect it and never compromise.
    Recently, I just noticed someone somehow hacked and broke my WPA-PSK AES passkey for one of my Wireless N network router.  It was not set up with a strong password though, but thankgod I had a firewall around that so my internal networks were safe. So this teaches you that if someone wants in bad, they will get in. 
    Hope this helps.

  • I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    Posted in error.

  • How do I set up my Mac mini to read iTunes and iPhoto files from my new Mac mini server?

    Want my old Mac mini to read iPhoto and iTunes files from my new Mac mini server.  Old Mac has no more room to store files.  How do I do this?

    Hello,
    Have you tried enabling iTunes Sharing & iPhoto Sharing on the Server?
    Or maybe...
    http://support.apple.com/kb/ht1449
    http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html
    http://support.apple.com/kb/PH2506
    http://support.apple.com/kb/ht1229

  • Cannot print to Mac mini Server print server from MBP

    Setup two USB printers on a Mac Mini server, they were recognized and new drivers downloaded. I can print from this machine. I shared them over LPR, IPP and SMB and announced through Bonjour
    I installed the printers on a new MBP
    When I try to print it starts to spool but the printer goes to pause. If I un pause it just goes back to pause.
    The error log said printer does not exist, I have removed and reinstalled the printers - no change
    I have no quotas
    Firewall ports open
    Have tried printing via LPR, IPP using generic PostScript driver and vendor specific
    Printer service is up in Server Admin
    I have not setup a an LDAP entry for this device as I thought I would not have to - am I worng here
    The other odd thing is I have Parallels setup on same MBP and I loaded Bonjour there and it prints fine from the VM - wierd huh?
    What have I done wrong here

    How do you locate the firewall settings on the server?

  • Mac mini Server 10.6  unable to search for files on the server from desktop.

    I'm running Mac mini Server 10.6 with 15 various Apple Mac desktops 10.4 / 10.6. The problem i'm having is that i'm unable to search for files on the server from any of the desktops. I have fixed permissions and rebooted. I can perfomr a search though command - F and spotlight from the server.
    Anyone have any ideas?

    I have a Mac mini server with Mac osx 10.6.8 installed --- I have a website {UNDER CONSTRUCTION} installed on it with a REGISTERED DOMAIN NAME belizeansworldwide.com -->[DNS service w/GoDaddy]  & DSL INTERNET service  w/VERIZON --- {My server is the ONLY DEVICE CONNECTED to my VERIZON DSL router/modem}
    When I enter my DOMAIN NAME or WAN IP # in my browser(s)--> Chrome OR Safari -- i get my Verizon modem
    set-up page-->{this incl the WAN IP# as I expected}----{NORMALLY I WOULD ACCESS MY Actiontec
    modem/router via 192.168.1.1} --- While in that webpage there's an option "shared files/folders"   & clicking on that option DISPLAYS MY WEBSITE --->  {"PORT FORWARDING DID NOT RESOLVE THAT"}
    My next attempt @ a solution was through my Server's SystemPreference>Sharing>Internet Sharing
    & this the Original Object of my post ===>  "MY SHARING PANEL DOES NOT INCLUDE THE OPTION
    FOR   'Internet Sharing' among the others like CD DVD, Remote Login,Remote Management, Bluetooth Sharing, etc.etc ---- Hope this additional info will help to clarify  &/or explain my problem
    Thanks, & best regards to you & yours

  • Cannot see Mac Mini Server from Internet: DynDNS alias gets thru cable modem to wireless router, not to the Mac Mini. How to configure?

    I want to make my Mac Mini Server (Lion) visible to the Internet from my home LAN. I have followed the Lion server install wizards and also set up a dynamic DNS at DynDNS.com.
    When I enter the Internet address with the proper alias from a web browser, I get dumped into the admin screen of the Linksys wireless router WRT300N. Hint: the WRT300N provides DHCP for the LAN, not the cable modem providing DHCP. The WRT300N has DDNS service set up. NAT and RIP are disabled. The Mac Mini DHCP is reserved.
    Suggestions? I could use the Motorola Surfboard SB6121 to provide DHCP but have hesitations.
    Point me to the right discussion/article and get me back on track, please.

    This sounds like a simple port forwarding issue, but I don't understand your LAN setup.
    The WRT300N has DDNS service set up. NAT and RIP are disabled.
    The chances are, you're running NAT somewhere in your network. If not the WRT then what? If it's your cable modem then you must have port forwarding configured on the cable modem, and that's where you need to focus - change the port forwarding to point to your Mac Mini's address rather than the WRT.
    HOWEVER, it is far more common to have the wireless router perform NAT and DHCP, which is why I question your setup.
    Not directly related, but:
    The Mac Mini DHCP is reserved
    Nix this. Your server should be configured manually, with a static IP address, not DHCP, even with a reservation in the DHCP server. The only advantage of DHCP is for dynamic hosts (hence the 'D' in 'DHCP') or if you expect to change your entire local subnet on any kind of frequent basis. The reality is that you can't just change the IP address of Mac OS X Server like this - there are too many dependencies, so it's better to set it manually, knowing that there's a cost (and pain) to change the server's address.

  • Restoring a time machine backup from a Mac mini to a new Mac mini server

    Hi,
    I just replaced a faulty Mac mini with a Mac mini server. I have a time machine backup of my Mac mini and want to transfer it over to the Mac mini. How do I do this?

    This is a bit of a guess... But I Imagine you would have to start with the workstation OS install DVD first, and go from there at the appropriate point. Any chance you have or could make a CCC backup instead? I am assuming you could boot a mini server from a backup of mini non-server. Then you could copy it over. This is probably worth a phone call to Apple TAC

  • Time capsule 2TB,connected to mac mini server leopard, LG DP1W mediacenter/player for watching movies on my tv from my harddisk tower connected to time capsule by usb/hub on G-technologie 8 TB G-SPEED Q RAID-oplossing(hard disk tower) is this gonna work??

    hello,
    ik have a question about the hardware i wanna buy
    i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
    I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
    i have ordered a Time Capsule 2TB
    i want to connect to the Time capsule this:
    G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
    UPC of EAN nr.: 705487185744 in the mac store
    i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
    LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
    -Connecting the Time Capsule to the Internet
    i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
    i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
    And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
    in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
    Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
    How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
    can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
    how does this works??? to share/upload/download to the internet only to one person????
    i hope someone can help me????

    hello,
    ik have a question about the hardware i wanna buy
    i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
    I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
    i have ordered a Time Capsule 2TB
    i want to connect to the Time capsule this:
    G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
    UPC of EAN nr.: 705487185744 in the mac store
    i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
    LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
    -Connecting the Time Capsule to the Internet
    i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
    i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
    And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
    in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
    Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
    How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
    can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
    how does this works??? to share/upload/download to the internet only to one person????
    i hope someone can help me????

  • Problem migrating to new Mac mini Server from Time Machine Backup

    I sell my old Mac mini Server and after I purchase the new one (unibody). I had the Time Machine Backup but I'm not able to restore it to the new mac mini. I started it with the Server Install DVD into it and I went to Utility menu to choose "*Restore from Time Machine backup*" but it said that *it was not possible to restore the backup to this machine because its a different hardware, and suggested to use Migration*. So I restarted it and when it asked me to choose between "setting up a new server" or "transfer information from an existing server" I chose this last. In the next menu didn't appear any Time Machine backups so I mounted the time machine backup and copied the Latest hd backup to an external firewire hd and I connected it to the new one. In the migration menu list appeared my backup but there was a *yellow triangle icon* over it and the message "*Migration is not supported from servers which are configured to use dynamic network addresses. Configure the source system to have a manual network address and try again*". But how can I config a static address into my backup if I can't restore it into a machine? I don't have anymore the old mac mini to restore the backup and make any change in the configuration!
    Any one can please help or give me suggestions?
    Many thanks

    I solved it!
    I changed the network settings by editing /Library/Preferences/SystemConfiguration/preferences.plist
    So I successfully restored my SL server installation, but now I have an issue with Ethernet and SD reader. See this post if you are interested:
    http://discussions.apple.com/thread.jspa?messageID=11709463#11709463

  • I'm unable to connect to my mac mini server remotely since the upgrade to OSX 10.8.5. I was able to connect without problem (from an Ipad and a Mac Pro workstation)before the upgrade which I applied last week.

    I installed an update to OSX 10.8.5 last week. I've been unable to use Remote Desktop VNC from my Mac Pro working station or use Mocha Vnc Lite from my Ipad to gain access to my mac mini server since I applied the update. Any help would be appreciated!

    Hi David,
    thank you. I tried all the steps and the thing different is that now with my usual user the CC app crashes silently, but Photoshop and Illustrator generate a crash report with this message:
    /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/../Frameworks/amtlib.framework/Versions/A/amtlib
    abort() called
    terminate called throwing an exception
    With the Adobe user it runs with no problems, I even tried to do a "diff" of running user processes between the two users and remove all launchers and extensions but it's still the same.
    I am a developer so I use XCode and other "dotfiles" and dirs within my home directory, I'm also using Ruby/RVM, NodeJS and some other. Can some of this stuff cause conflicts?
    Thank you
    Vito

  • Need to update from MAC OS X server 10.4.11 to MAC mini server, any tips?

    Hello I am having issues to migrate from a Mac OS x server version 10.4.11, processor 2GHZ PowerpcG5, to a brand new mac mini server running mavericks.
    I been reading posts in the communities saying that I will need to get a snow leopard first(?) can I get MAC OS X snow leopard, or it needs to be MAC OS leopard server?
    Thanks in advance.

    Hello,
    I do not know for certain, but what little experience I have with Server, my guess is that you'll have to get 10.6 Sever.
    It's not available online, but might still be had by calling Apple & asking for... Part Number: MC588Z/A
    Or, you might repost in one of these areas...
    https://discussions.apple.com/community/servers_enterprise_software

Maybe you are looking for