Transferring Qualifications from HR to CRM

Dear All,
I need to transfer Employee Qualifications from HCM (Infotype 0024) to CRM. I have maintained the Infotype 0024. To do the transfer, i run PFAL. I have attached the screenshot. After the execution, it shows that the IDoc has been processed successfully. Yet in CRM, the employee's qualification doesnt reflect. In Table T77S0, in HRALX/PQUAL, the switch has been maintained as X. Could you guys please help me out with this ????
Best Regards
Nikhil J Nair

Thank you for your response! That did help replicate the qualifications and groups. However, now we can't seem to get the relationships to transfer into the HRP1001 table. We have all the qualifications and groups, but no hierarchy structure. Any ideas?
Thanks,
Jeremy

Similar Messages

Transferring of nmaterial from ECC to CRM using middleware tool (R3AC1)

Hello Forum,
I need to transfer material from ECC to CRM where MARA-MTART = 'ZAWA'
In CRM MARA table do not exist.
I need help in transferring data from ECC to CRM using R3AC1 .
This transaction is not in ECC but it is in CRM.
Thanks & Regards
Lovleen

Hello Lovleen,
In transaction R3AC1 you can define the filters for the adapter object MATERIAL.
THen you can do an initial load for this object via txn. R3AS which'll download materials from ECC to CRM.
Thnx.

Availability transfer from HCM to CRM

Hi,
Could you please help on configuration steps for transferring availabilty of the employee from ECC 6.0 HCM to CRM 7.0 EHP1. We have implemented the Service Resource Planning (Workforce Deployment)
We have successfully transferred employees from HR to CRM with Qualifications.
1. What are the infotypes to transferred for mapping the time allocation types in CRM and where is the mapping in CRM and ECC maintained.
Any pointers to latest configuration guide or good documentation will be appreciated.
Regards,
Shridhar

Hi Salil,
Thanks for the quick response. I have done the integration by referring to the note 550055 and we are able to replicate employees with qualifications.
But we are having issues in assigning the avaialbilities to the employee in service arrangement. In CRM we can create availability template and assign it to resources but with HR integration this is not possible in CRM. The availabilites has to come from HR.
Is there any customization to setup the mapping with CRM availabilty template in HR.

Error appearing while transferring products from CRM to R/3.

Hi All,
I am facing a problem in CRM system while transferring products from CRM to R/3. System is throwing a message "Exception condition NO_STRUCT_DEFINITION raised" and product transfer is not happening.
Please suggest some solution.
Thanks & regards,
Rupam.

Hi Arup,
Thanks for your assistance once again.
I have checked the 'CRMRFCPAR' table entries in R/3 system. One entry with 'Send XML=M' is present in that table.
No error Bdoc exists in system, the existing Bdocs are showing as successfully processed in the transaction 'SMW01', The queue name corresponding to the Bdoc is 'CRM_PRODUCT_IP'.
I have also checked the transaction 'GENSTATUS' .There is no object with status red, instead of that two objects are existing with green status.
Can you please tell me how to verify, whether parent object ('DNL_CUST_PROD0') has been successfully loaded or not?????
Eagerly waiting for your valuable suggetions.
Thanks & regards,
Rupam.
Edited by: rupamsap on Mar 19, 2010 9:46 AM

When transferring HR data from ECC to CRM via change pointers

When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
paricularly the last name and first name of BUT000
Do you have any idea why this could be happening
Thanks in advance

Hi Kittu,
Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
use this links kittu.
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Creating a change pointer and subsequently triggering an IDOC
thanks
karthik

Transfering Identification infotype from HR to CRM

Hi
Gurus, I replicated central person from HR to CRM, using message 312090, there are those infotypes what can be transfered:0000, 0001, 0002, 0006, 0009, 0105 and their sub-types, but Infotype 0185 is not mentionated, this infotype contain personal ID, like social security, passport, and so on...
I´m not IDOC expert, but I need to know whether is possible to transfer that infotype without mofification in the estandar Message Type, if don´t, please could you tell me how to modificated to do it??
Thanks a lot

Hi,
Can you share how you have solved this.
Thanks in advance
balu

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

Replication of bp name field from ERP to CRM

Hi experts,
We have a problem in ERP to CRM master data replication.
We have already connected our ERP (ECC 5.0) system to CRM 7.0.
We have made initial master business partners (bp) data load from ERP to CRM without problems.
All bp fields, including NAME (but000-name_org1) are transfered correct from ERP (KNA1-NAME1) to CRM.
We have a z program in ERP that is used by users to change the customers names (KNA1-name1).
When we use our custom program in ERP to change the kna1-name1 field in ERP, the bp name field is not changes in CRM.
Using XD02 or FD02 in ERP to change the name (kna1-name1) field in ERP the replication of this field to CRM is correct.
KNA1 table is updated correctly in ERP using our custom program .
What does transactions XD02 and FD02 has that make name filed replicated in CRM?
Thanks in advanced.

Hi,
First variant:
You have to retry load business partners by request:
Tcode R3AR4, R3AR2, R3AR3
So, system retrive new data from tables and transfer to CRM.
Second variant:
You have to add to your z-program part, there you fill data in the CRM system also (via RFC).
Denis.

Problem in data transfer from BW to CRM

Dear Guys,
I am facing one problem when i am tranfering the data from BW to CRM system (using Analysis Process Designer).
When i am transfering data from standard ODS, data has changed properly.
But in custom ODS, data has not changed.
In both part, upto aggregation data has come.
Any thing i have missed out in custom ODS.
Please anybody give inputs.......
Thanks in advance.
Regards,
Vivek.V

Hi Vivek,
There is no special process for this cube load. Just check the job log and check for any short dump in R/3 while running the extractor.
I checked the datasource help link for this cube but there is nothing special mentioned:
http://help.sap.com/saphelp_nw04/helpdata/en/da/f7bc3961d4f339e10000000a114084/content.htm
Bye
Dinesh

Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.

Hi,
While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT).
I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data to CRM.
Here I am getting status of equipment from R3. Now how do I update the status in ct_bus_trans_msg.
I need to update ct_bus_trans_msg-ORDPRP_OBJL_I_D-IOBJECT_ID.
Thank you.

Hi,
Internal table ct_bus_trans_msg have several segments.
These segments are similar to Bdoc meaasge.
There is segment called STATUS_H. You need to populate this segment with status form R/3.
Please reward points if useful
Murali

Issue with Replication of Bank Account Numbers from ECC to CRM.

Hi,
I am trying to transfer business partners from ECC to CRM, I see errors in SMW01, stating that Bank Key is not valid for US, I have then performed the Initial load for DNL_CUST_BNKA to tranfer Bank Master Data, but again getting error but this time on BANK ACCOUNT NUMBER. How do I transfer the BANK ACCOUNT NUMBER of Business Partners from ECC to CRM. Before starting the initial load for BUPA_MAIN do I need to run any other Initial load to move the BANK ACCOUNT NUMBERS to CRM?
I have already moved Bank Master data using DNL_CUST_BNKA, but can't able to replicate BANK ACCOUNT NUMBERS, can someone please provide me some steps which I need to perform to tranfer BANK ACCOUNT NUMBER.
Now when I ran the initial load for BUPA_MAIN , all Business partners which do not have BANK ACCOUNT NUMBERS are replicated successfully but the one which have Bank Details did not got transferred and gave errors for BANK ACCOUNT NUMBER, Please provide some suggestions.
Thanks.
Jennifer

Willie,
Thanks for the reply:
Error: BANK ACCOUNT NUMBER ******8547 is not valid
Support pack level:
SAP_ABA 701 0003
SAP_BASIS 701 0003
BBPCRM 700 0002
Thanks.
Jennifer

Data transfer ship-to party from ERP to CRM with role ship-to

We currently have an ERP system and we want to transfer the various customers to CRM but with different roles e.g. we want the ship-to accounts (account group 0002 in ERP) to be created with a role of ship-to in CRM. When we transfer the data at the moment, all accounts are being created in CRM with the role of sold-to.
Does anyone know if this is possible and if so, how?

Hi Johan,
Thank you for your helpful response. Once we have done the initial transfer of data from ERP to CRM, we want the CRM system to be the master system for creating customer records. However, we will create some customers with a role of ship-to in CRM and we want to these to be transferred to CRM with an account group for ship-to customers. Do you know if this is possible?
Regards
Helen

How to load prices from ERP to CRM

Dear All,
I'm trying to download product prices, customer specific prices and customer specific discounts from ERP 6.0 EHP5 system to CRM 7.0 EHP1. RFC connection works, I'm transferring customers to ERP by middleware. Also I've done initial load of materials from ERP to CRM. Problem is with prices. I did initial loads of: DNL_CUST_PRICE without errors, but prices are still not available in CRM WebUI. What is the next step?
Could you provide any instruction or SAP note?
thanks in advance,
regards

Hello,
Before talking further about Web UI, first check whether condition records exist in CRM tables.
Also, check in table COMM_PRODUCT and BUT000 that whether Product and BP exist.
If yes, then if you are telling that there are 3 entries in CRM table for the same BP and Product,
then check mapping table CND_MAPM_CNV_REC for SOURCE_ID fields. Make sure, you have the correct
LOGSYS in this table for KNUMH-VARNUMH mapping.
If there are more than one SOURCE_ID present in this table, then chances of duplication is possible in condition tables.
You can also refer logs using txn CND_MAP_LOG_DISPLAY
Object: COND_EXCHANGE
Sub-object : CONDITIONS
And give 'from' 'to' correctly, to get the correct logs.
Hope this helps!
Best Regards,
Shanthala Kudva.

Unable to open URL attachment from SBWP in CRM WEB UI

Hello Gurus,
Need your help please. I'm having some problem opening the URL attachment from SBWP via CRM 7 WEB UI (I used a Transaction Launcher for SBWP). The attachment is a Webdynpro application. I am able to open the attachment in SAP GUI, but not in CRM WEBUI. This problem occured when we update the SP level of CRM 7.
Here's the scenario,
- whenever I click the attachment, it open a new window, which also happen even before SP level update, with the following information:
Execute an Application on FrontEnd
Please wait. You will be forwarded automatically.
This page is included for technical reason.
Execute program.
Status: Displaying Office Document ..........
After a couple of seconds, it will return to the Workflow Workplace screen.
I have checked the workflow log and found no inconsistency on the attached URL.
Immediate response would be highly appreciated. Thanks in advance.
Regards,
Edwin

Thanks for the reply WD ABAP.
Yes, I did try to use the functionality of Worklist and the URL attachment successfully opened. However, there are some limitation in its functionality as indicated in the link below that opted us to use the SBWP in CRM WEB UI via transaction launcher.
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWorklist-AdvancewithDialognotSupported
We don't want to adjust the logic of our existing workflow at this point as described in the above link as it will entails end-to-end testing again. We just encountered this issue when we update the SP level of CRM 7.
Hope there is an alternative solution without shifting us to Worklist.
Regards,
Edwin

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

Transferring Qualifications from HR to CRM

Similar Messages

Maybe you are looking for