Transferring record from cardscan to Palm

I transfer cardscan records to my palm and they are transferred to the "unfiled" category in my palm.  They suddenly stopped transferring. Cardscan says it transferred but I can not find the record anywhere.  I have reloaded Cardscan software.  I tried to export and import and got an error message that said maximum number of records has been reached. It said to archive or delete records and synchronized which I did. Still no records are transferring.  Don;t know what else to do. Help please!
Post relates to: Palm TX

If you have Palm desktop installed, you can go to start, programs, palm, PIM conduit sync and set the sync to Outlook. Sync your device and the data from Outlook should sync to your handheld.
If you don't see PIM conduit sync, you will need to re-install Palm desktop and select to sync with Outlook when it asks the program you want to use for the PIM data.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=visor&mn=pro&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Similar Messages

  • Re: Transferring records from one request to another.

    Hi Guys,
    Currently the pseudo delta is loaded with posting date selection as two months(say, may and june- 2 lakh records).
    Every two months once we do full update (3 million records).
    every day we delete the delta request and load data, the full load request will be available.
    for some reason, i want to move few data available in the delta request to full update request. bcoz i have done changes in the routine level, which adds up new record to dso. I want to move these added records to full update request. Bcoz the delta request is deleted daily and loaded. I dont wnat my changes to be executed daily. Bcoz the changes i done in routine level takes more time to complete the dtp.
    Is it possible to move selected records from one request to another? If yes, i will move the record to full update and revert the routine change. so that my data load will be faster.
    Regards,
    Anand

    Close

  • Transferring contacts from Outlook to Palm

    This question has probably been addressed already, but I couldn't find it. Is there a way to move contact information from Microsoft Outlook directly to my Handspring Visor Pro?
    Post relates to: Visor Pro

    If you have Palm desktop installed, you can go to start, programs, palm, PIM conduit sync and set the sync to Outlook. Sync your device and the data from Outlook should sync to your handheld.
    If you don't see PIM conduit sync, you will need to re-install Palm desktop and select to sync with Outlook when it asks the program you want to use for the PIM data.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=visor&mn=pro&cn=unlocked
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
    Post relates to: Palm i705

  • If i transfer some records from one server to another server,

    hi to all......
    5........If i transfer some records from one server to another server, will that save in change request or work bench request?
    thanks and regards,
    k.swaminath

    Hi friend my suugession is , if u r transfering records from one client to another or changing anything in the active pgm, it will save under  change request...
    But if u r transfering records from one server to server it will save under work bench request...

  • Hotsync failing to download records from Palm TX

    I just got a used Palm TX to replace my ancient Handspring Visor, but I can't use it with my main Windows XP system 'cause it just plain won't pull anything down from the TX. It'll put stuff onto the handheld fine, it just doesn't download anything. It doesn't even acknowledge that there's data there to be retrieved. The only way I've gotten it to properly sync is by installing Palm Desktop 6.2.2 on my father's XP machine in order to test if something was wrong with the TX. And I've tried both USB and Wi-Fi syncs to my computer, with no results.
    I know it's something wrong with my XP PC, 'cause not only doesn't the Hotsync work right, but Palm Desktop doesn't save anything. Put some data into the Date Book, Address Book, etc., press "Save All", and it'll cheerfully act like it's saving it while silently dropping it into the void. Reopen Palm Desktop and it's all missing. I know this 'cause I exported all my records from Palm Desktop 4.0.1 before uninstalling it, then imported them into 6.2.2, and none of them stuck. The only time it showed up was when I was fiddling around installing and uninstalling the Palm Desktops and tried to install 6.2.2 without uninstalling  4.0.1 and the installer caught that the old one was installed and told me to uninstall it to complete the installation. So I did that, and lo, it imported all the records from the previous install, and they showed up in Palm Desktop 6.2.2. Of course it wouldn't save any changes after that, but it could upload them into my TX.
    Anyway, if someone could help be nail down where the Hotsync and Palm Desktop are breaking, that'd be really helpful. I'm at my wits end on this one. Thanks.

    Have you checked the HotSync Manager settings for each conduit?  Are they set to "Synchronize", or writing in one direction only?
    Is there more than one HotSync Account name on Palm Desktop?  Are you viewing the correct one that matches the name in the HotSync app on the TX?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I transferred photos from my camera to my computer and created a burn folder.  I recorded the burn folder on a DVD but it will not play on my DVD player.  What am I doing wrong?

    I transferred photos from my camera to  burn folder on my macbook Pro.  Made a DVD from the burn folder but it will not play on my DVD player.  What am I doing wrong?

    How did you do this burn? Did you use a program like iDVD?  A DVD player requires that the data on the DVD is recorded in the proper format: MPEG-2.  A program like iDVD will do this.  There are other programs available that can do the proper coding (Roxio 'Toast' for example), but iDVD has the most features and is easy to use.  It is no longer available from Apple, but if you search on Amazon, you can find 'iLife 11', a suite of programs including iDVD.  It will function properly on Apple's current operating system, but it cannot make a High-Definition (Blue-Ray) presentation.  It is Standard Definition only, as are all regular DVD's. One good way to present photos on a TV is to make a slidesow in iPhoto, then export that slideshow to iDVD, where it will be properly formatted for a DVD player.  Or, iDVD can make its own slideshow of up to 99 photos.  HTH.
    Frank

  • Delta package not fetching all records from Delta queue in r/3

    Hello,
    I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
    The Delta has been initialized and everyday the delta is being moved from r/3.
    I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
    For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
    Shouldn't the delta package get all records from the queue on single execution??
    Is there some setting to define the nr of records to be loaded?
    I'm confused with this behaviour.Please help me understand this behaviour.
    Thank You.

    Hello,
          First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
    Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
    If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
    Hope this helps.
    Regards.

  • Error while transferring Data from PSA to DSO

    Hi all,
    We had a requirement to load data into the DSO.We are extracting it from R3.
    Problem is that while loading in PSA it is showing 1056 records ,But when we are trying to load it in DSO it is showing Transferred records as 1428 and added records as 1073.Please help ASAP!!!!!!!!

    Hi,
    the difference in records can be due to some  changes happening in the transformation.
    check your transformation from the DS to your DSO if it contains any start,end or update routines oe any other such thing.
    Also check if there is one to one mapping from DS to DSO or if some fields in DS are not mapped to DSO.
    Regards,
    Dhanya

  • What's the difference between Transferred Records and Added Records?

    When right click an ODS or a cube to select Manage, then under the 3rd tab called Requests, there are two columns called Transferred Records and Added Records, what's the difference between these two?
    Thanks

    Hello KeLviN,
    How r u ?
    Consider a realtime example.
    Assume a transfer of Transactional Data from R/3(with PSA) which is having Unit values in it.
    Now, I found in RSA3 2844168 of records. In BW I saw one Data Packet with 306 error records(because of a UNIT value is not available in BW T006 table, Eg. YDD) which are automatically collected in PSA. Now in the Monitor screen you could see 2 Monitor status with GREEN Signals for 2 set of data.
    1. with 2843862 records
    2. with 306 records
    Now, if u manage the Data Target you will get 2844168 in the Transferred Records & 2843862 in the Added Records. and the 306 error records are in the PSA.
    Hope this is clear.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Transfering videos from Iphone 4 to laptop, the video is rotateed 90 degrees

    After transferring videos from Iphone to laptop, Why would the video be rotated 90 degrees?

    IIRC, the iPhone is configured that "normal orientation" for video recording is horizontal with the home button on the right.  If you are holding it in a different orientation, then that would be encoded in the EXIF data on the recirded video file.  Now if that file is edited and that EXIF data is removed or altered, then you could see what you are seeing.  It is also possible that the player yo uare playing the videos back in does not properly support the EXIF data embedded in the videos, which would have the same results.  When I record video on my iPhone 5, the playback on my Mac works properly.

  • Recording from casse

    hi again
    i forgot to ask-when your recording from a cassette tape to a cd how can i get the songs to fit onto a cd as a caseette tape is 90 minates and the cd is only 80 minates?thanks
    coonsanders

    SSR wrote:
    I believe you can buy CDRs which are 90 minutes, but I'm not sure how well these work.
    You can even find 99 minute CDRs. The only problem with the higher capacity CDRs (90+) is that some burners and some players do not support them. I would check http://www.dvdrhelp.com for compatibility of your burner and players before investing in these discs.
    Are you using any specific software to enhance the sound quality of the cassette recording before transferring?

  • Recording from DVD to iMovie.

    Can I record from a DVD recorder/player either NTSC or PAL subject matter tranfered to a DVD into iMovie. This is not copyright material, but my own NTSC VHS tapes transfered to DVD. Do I need a converter box? What is the video format? Is this a possibiltity? I only have firewire in to the MAC. How do I do it?

    Hello Alaner,
    you don't need a converter box (although it's a possibility) but you can get the video off your DVD on your mac, converting it into something iMovie can handle
    check out Dan Slagle's Unofficial iMovie FAQ
    Using Mpeg (DVD) footage
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    helpful tools:
    MPEG StreamClip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    Apple MPEG2 PlayBack:
    http://www.apple.com/quicktime/mpeg2/
    DVDxDV
    http://www.dvdxdv.com/
    hope this helps
    mish

  • Date issue while transfering pics from macbook to external drive

    Hello
    I am transferring pictures from my Macbook to an external hard drive and my issue is that the date of the picture (date of creation/modified) is being replaced by the date of the transfer… So let say that all my 2013 pictures have now the date of today – 19th June 2014. I tried to drag the pics as well as to export them but I am getting the same issue. I am doing transfers regularly and it is the first time I encounter this issue. Funnily enough it works when I drag one picture at a time but not for more than 3 pictures – very weird.  Your help will be very appreciated !

    There are two kinds of metadata involved when you consider jpeg or other image file.
    One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
    The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
    Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
    Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
    When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
    However, the Photo Date doesn't change.
    The problem is that the Finder doesn't work with Exif.
    So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

  • Recording from vinyl directly onto m

    Had a quick look thru the FAQ's and didn't see an answer to this question, but apologies if it has been discussed before.
    I've heard that it's possible to record an analogue signal (in my case vinyl records from my hi-fi) directly onto a Creative mp3 player. is this true? One one external website they mentioned that the MuVo can do this - all that is needed is an adaptor for the Creative line-in jack to accomodate the standard input from a hi-fi amplifier...
    Would appreciate any tips, advice etc on how to do this, which Creative models support this and any extra hardware/software required.
    many thanks

    I don't think that recording direct to the player- is this what you're talking about?- is the best way to go.
    Personally, I would just go and download the albums you have- owning the vinyl makes it legal for you to download the song from a peer to peer network.
    If you're hell-bent on transferring them, going table to computer is the way you'll want to do it. Now, if I'm not mistaken, a phono signal isn't a perfect line-level, so you'll need to compensate with the recording level on the computer. Unless you have a top-of-the line sound card with RCA jacks connected to a dri'vebay component, you'll need a /8'' to stereo RCA adapter, which you can find at almost any electronics store that carries adapters.
    In my opinion, the best program to use to record audio is Audacity, which you can download for free at http://audacity.sourceforge.net . Audacity will let you export directly to MP3 after you point it in the direction of the LAME encoder's DLL, which is included with many players. Chances are you have one of them already.

  • How to download (contacts) records from a device?

    I've noticed that iSync only syncs information of records that exist on both Mac and device (unless the option is chosen that the records on the device should be fully replaced by the Mac's contents) and updates missing records on the device. However, it does not update missing records on my Mac. So if John and Mary are on my Mac and John and Suzy are on the device, Mary will be added to the device, any info on John that has changed will be transferred to the Mac or the device according to which changes were latest, but Suzy will not be imported from the device to my Mac. But that's what I want it to do, too!
    So basically - how can I import records from a device to my Address Book for pete's sake?! (I use a Motorola Pebl, but I'm aiming to discover the general trick, if it exists that is - which it should.)
    Many thanks in advance!

    Ok, the weirdest thing just happened...
    I wanted to follow your suggestions, but backing up my phone's contacts is not possible (at least not without a lot of fuss googling feeble third-party apps, which I loathe). So I went on backing up and erasing my address book trying to d/l everything from my mobile.
    And what happened? A few seconds after erasing every record, the records that are only on my mobile suddenly appeared in my address book! It's like it only now discovers there are some records imported. Very buggy, that feels. Well, I think I'll manage from here, but it would be nice if this sort of thing would not happen...

Maybe you are looking for