Transferring Songs(30GB) in My Mac's HardDisk To My Friend PC's Hard Disk

Transferring Songs(30GB) in My Mac's HardDisk To My Friend PC's Hard Disk?
what are the cable and software I need?

Mac will read drives formatted as FAT32, you could use any USB drive formatted on PC - then just copy over MP3s from your Mac, connect the drive to PC and copy the files again.

Similar Messages

Having transferred songs from my old mac to my new Macbook I cannot authorise them because my old Apple ID is an obsolete email account. I cannot retrieve messages from it so cannot change password.

Having transferred songs from my old mac to my new Macbook I cannot authorise them because my old Apple ID is an obsolete email account. I cannot retrieve messages from the email account it so cannot recieve a password change notification. The answers I give to security question is rejected. Help!

Contact iTunes Customer Service and request assistance with your issue...
Apple Support iTunes Store Contact Us

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

My mac pro does not start up because then hard disk is formatted

My mac pro does not start up because then hard disk is formatted, How can install the operating system.
regards,
Tassew

Did you erase the hard drive yourself? If not, what exactly are you seeing, and what happened immediately prior to you starting to see it?
Your profile indicates that you are/were running Lion (Mac OS X 10.7.4) on a retina MacBook Pro, so you should be able to hold down command-R at startup to enter recovery mode, and you can reinstall the system from there. But whether or not you need to do something else first depends on your answers to the questions above.

Transfering songs from pc to mac problem

alright, well ive had trouble transfering all my music from my pc to my mac before...so tried it one more time and i still got the same problem but not as bad. I uploaded all the files to my ipod using disk mode...i open all the files up in itunes on my mac and it adds all the songs to my itunes library. It starts the process fairly fast then it haults on one song for a couple seconds that continues through the others, that song gets currupted and skips when i play it. its done this for a couple songs, and i dont have the time to listen to each song and re-upload the currupted songs. how can i transfer my songs succesfully

I had this problem also. I set my ipod up for disk mode. Then I hooked up my ipod to my windows machine (it must be formatted for windows) and transferred all the songs onto my now ipod hard drive. Then I plugged my ipod into my mac. It will ask you if you want to associate this ipod to this computer. Say no.
It should show up on your desktop as a hard drive. Pull the music off onto your desktop (make a folder for the music). This worked better than having iturns search for the music. Eject the hard drive and launch itunes. Have itunes look for the music on your desktop (add to library).
Hope this works for you.

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

Transferring songs - 30gb iPod to computer

I have an old 30gb iPod (click wheel) that hasn't been used for a long time. I want to pull the songs off it and put them in a new computer. I no longer have the old iTunes account it was synced to. Is there a way for me to pull the music off of it?

I just tried updating iTunes from 7 to 8.0.1 or whatever it is now, nothing...
anyone???

Transfering Apperature from my old mac to my new macbook. I have no disk

disk utility does not want to make an image of it.

Download the trial version from Apple.com and then use your valid serial # to install on the new machine.

Mac Pro won't boot after adding new hard disk.

I have 2 SATA back up disks which I want to install in my Mac Pro. But when I install them into my mac and hit the ON button, I hear a "click" and nothing happens. When I remove the hard drives the Mac will boot. I also tried it with only one of the two hard drives but no luck.
What could this be ?

There is a lack of just what these are, outside of assuming 3.5" SATA
Did you erase or format them? what make/model and bought from where?
Tried booting OS X DVD?
also, if this is Early 2009 and you are still on 10.5.8, you should strongly consider if you use ANY audio program or deivce, to upgrade to 10.6.5+
PS: unplug? after shutdown? or in order to shutdown?
That can add trouble to your boot drive.
Try safe boot also. And check the directory of all your drives.

What type of hard disk should I use if I want to use it on mac and windows?

Hey Forum,
I am using windows xp on my macbook (snow leopard). I came across some dealers who say that there are hard disks for mac only and for both mac and windows. So, I wanted to buy a hard disk so that I can use it both on mac and windows xp, so what type of hard disk should I use? Must I partition into 2?
or are there any harddisk in the market which is compatible for both mac and windows xp without screwing up the format(NTFS/Mac OS X Journaled)? Pls look into this matter and help me with it.
All of your replies and suggestions is much appreciated.
Thank you.
Ala.

Run, don't walk, from that dealer! and never look back
Once in a very long while Apple will have customized firmware on drives, and it is possible to find SCSI/SAS or drives that are destined to be used with high end storage controllers.
But that is the exception that makes the rule.
SATA is SATA. Though.... there are now SATA III drives that don't work in XP, or that need a jumper, and Seagate and some drives have managed to deliver firmware that has caused trouble... and Apple has had to issue firmware updates to help compatibility....

Hard disks, partitions and Mac Pro

Hi all,
I'm new to the Mac Pro and am migrating from a Windows environment, I have used a iBook for the past 6 months and this is the reason for totally migrating to a Mac Desktop.
I have spent half a day on browsing the forum here, very confusing I must say but then again I add that I am an absolute a-technical person.
I have a few questions on storage which I hope might get answered here;
My Hardware:
I am about to order a 2,66ghz Mac Pro, 4GB Ram, XP1900 and a 160Gb hard disk will will be replaced as soon as the Mac Pro enters my dwelling.
My Work Environment:
Apart from the basic office things, Internet, Mail and such I will use the mac Pro 90% for Imaging purposes. Most used applications:
- CS2
- Aperture
- Adobe Lightroom
as well as a number of add-ons like HDR programs, Noise programs, RAW converters etc.
I am a Photographer working with Mid-format and Standard format images, which in some case, like when using HDR can reach sizes of well over 150-200Mb per image!
Useually the image size of a 16bit mid-format tiff are around 70MB.
Now for the question, how to configure the best possible HD setup.
I will use WinXP, which I would like to run on a seperate partition/disk
I need a schratch disk for CS2
I need roughly 500GB of intermediate storage for imgaes before the periodically get back-up to external hard disk.
So I was thinking the following, and this only based upon how I used my Win Environment:
150GB Raptor as start-up disk and location for programs and OSX as well as basic documents and files
76GB Raptor as Scratchdisk
500GB as WinXp disk (30%) and rest as storage for Image cataloging system (mainly normal sized Jpegs)
750GB as Image tank
I have the Raptors, but don't have to use them if a better solution comes out. Since I will be using my Win pc until everythink works satisfactory on the Mac...
some remarks:
I have red about raid, both 0 and 1 seem interesting but I will loose out on disk space possibilities, and will be forced to work with external drives again, which I don't like... but if push comes to shove I will do that.
sorry for the information overload, and maybe all points have been answered in other threads before, but whilst browsing through hundreds of threads I couldn't see the forest becasue of the trees anymore.
One last comment, I make my living with photography so a good setup is of vital importance ....
Kindest regards, and many thanks in advance

Hi all,
Hi,
Now for the question, how to configure the best
possible HD setup.
IMO; use a 3 drive RAID 0 for your boot, application, and
data partition - my style would be all in one big partition
and just segragate stuff with folders. I would then add 2
USB or FireWire drives. One for backing up your system
and one for the windows XP if you just have to have windows
running on your MacPro. They don't run at the same time you
know - like on Amiga where MacOS, Windows, and AmigaOS all
multitasked together in shared memory space simultainiously.
As such my opinion is that it's better to keep your WinTel
box on a KBM switch and LAN the two together.
I will use WinXP, which I would like to run on a
seperate partition/disk
I need a schratch disk for CS2
With a 3 drive RAID your disk I/O is between 3 and 20 times
the speed of a single drive setup so separate cache drive
isn't really advantagious. Click on the link below and
scroll down to the Drive Test area:
http://db.xbench.com/merge.xhtml?doc1=199338&doc2=195252
Both are my profiles. One with a single drive, and one
with a 3-drive raid. No other differences.
I need roughly 500GB of intermediate storage for
imgaes before the periodically get back-up to
external hard disk.
So I was thinking the following, and this only based
upon how I used my Win Environment:
150GB Raptor as start-up disk and location for
programs and OSX as well as basic documents and
files
76GB Raptor as Scratchdisk
500GB as WinXp disk (30%) and rest as storage for
Image cataloging system (mainly normal sized Jpegs)
750GB as Image tank
I have the Raptors, but don't have to use them if a
better solution comes out. Since I will be using my
Win pc until everythink works satisfactory on the
Mac...
IMO the Raptors are overpriced. If it were me I would sell
them. I think the two together will pay for all three 320
or 300 gig RAID drives. I did some research regarding which
drives are good in a Mac RAID environment and I ended up
going for the the MaxLine Maxtor drives (even though I hate
Maxtor usually). So far I'm very happy with them and the
fact that they are like one of the most inexpensive drives
you can get didn't hurt either.
I think that if a person REALLY needs the speed offered by
Raptor drives and is willing to pay the difference for it
then they should just get a dedicated RAID card which offers
even more of a speed increase!!!
some remarks:
I have red about raid, both 0 and 1 seem interesting
but I will loose out on disk space possibilities, and
will be forced to work with external drives again,
which I don't like... but if push comes to shove I
will do that.
You don't lose any space if you use just RAID 0. If there
are three 300gig HDs that format individually to 260gig
each then in a RAID 0 configuration you would have 780gigs.

Does this also serve as an external hard-drive so I can free up space on my macs by transferring songs/pictures?

Does this also serve as an external hard-drive so I can free up space on my macs by transferring songs/pictures?

https://discussions.apple.com/message/15470135#15470135

I have transferred songs from my mac to iphone the songs are showing on iophone but in light type ans will not play

I have transferred songs from itunes to my iphone but they are greyed out and will not play

It means that the content didn't fully transfer. I would attempt to transfer it again.

My newly transferred songs from my external hard drive to my ipod read as "Other" instead of "Audio" files

Okay, i need help bad.
Here's the issue. This is my 2nd iPod classic. My first one, which worked beautifully for several years, died. the drive went bad. A sales associate at the Apple Store said it just crapped out (she didn't use those exact words) and my options were to send it out for a new 80G to replace the bad one at $120, or buy a new one, which yielded only one size and one choice for the classic ipod, the 160G. So i sucked it up and bought the 160G. I wanted the extra storage space anyway.
Came home, hooked it up, and new ipod required a newer version of itunes to mount and manage mp3's. it's not iTunes 10, required for sync with iPhone, but newer than what i currently had at hook up, which was some version of 8 or 9. it's now version 9.2.1, to be exact. After installation was complete, iPod mounted and worked with new version of iTunes just fine. Just recently, I connected my external hard drive to my laptop to transfer music i had backed up from my old classic and iTunes. The transfer seemed to work fine, but now with my pod still connected, the newly transfered audio mp3 files are not in my library. The are stored as "Other" under the iPod Summary tab, NOT AUDIO. so i cannot listen to those 14,000 or so songs and albums i just transfered. This is completely frustrating. Can anyone help?? Thanks. How do i convert these to Audio Mp3 files instead of "other" so i can listen and manage in my library, and so they show in the artists menu?? I have "Manually manage songs" checked in the Summary tab. I think it's storing or acting as an external hard drive. Someone help, i'm really ****** off right now. I spent a lot of time d*cking around transferring songs i can't even listen to or make playlists from now. Thanks a lot!
< Edited By Host >

You maybe right, you transfer your 14k songs to your iPod under disk mode, so it don't appear as Audio.
To load your songs into Ipod Audio section, your must load them via iTunes, either Sync or Manually Manage your library, any other way, it just uses up space in the iPod Harddisk, and wont be on your iPod music menu.
So
1. Import your 14K songs into the iTunes library first. (read the iTunes help if you need instructions)
2. You can either Manually manage selected songs from the library or Sync all.
You can delete the songs in the Other section, by going into diskmode, use Finder and delete the 14K songs.
Good luck!

Transfering music from pc to mac using iPod as a hard disk drive

I just got MacBook Pro and iPod which I have formatted for a mac, however, I want to get the songs from my IBM thinkpad to my mac. I transfered a bunch of them with a friends external hard drive, but forgot about all my purchused songs from the music store. I am pretty sure there is a way to use the iPod as a hard disk drive but everytime i attach it to my thinkpad it asks if I want to format the iPod and then won't transfer. So I guess my question is can I do this and if I can do I have to format it to windows and then transfer the files to the iPod and will I be able to put the files from my thinkpad to my mac?
thanks!!!

An iPod formatted for Mac won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. You can reformat your iPod on Windows if you want to use it on both platforms as Macs can read Windows formatting, then you could enable it for disk use on the PC: How to use your iPod to move your music to a new computer

Transferring Songs(30GB) in My Mac's HardDisk To My Friend PC's Hard Disk

Similar Messages

Maybe you are looking for