Transferring tracks from Nomad Jukebox 2 to MUVO with Creative MediaSource Player/Organi

I recently installed Creative MediaSource Player/Organizer . When I transfer tracks from Nomad Jukebox 2 to my MUVO the tracks are transferrred as folders, not tracks (which the MUVO cannot play). How do I get the Nomad Explorer to transfer the MP3s as tracks and not folders? I'd appreciate your help.
P.S. I do not have this problem when I use Creative Playcenter to do a similar tranfer.
Message Edited by rrtash on <SPAN class=date_text>0-3-2006 <SPAN class=time_text>02:27 PM
Message Edited by rrtash on 0-4-2006 2:4 AM

PeeBee wrote:
Does the MuVo work with Nomad Explorer? I didn't think it did.
PB
I'm pretty sure it doesn't. Perhaps there's some confusion with the MuVo Explorer, or plain Windows Explorer.

Similar Messages

  • Help with Creative MediaSource 5 Organi

    i have a zen plus4 gb that i bought 2nd handi am able to use media player 0 and sync the music but when i try to use Creative MediaSource 5 Organizer and sync the music itsays " no creative mp3 player connected please connect and try again i downloaded the software becasue the player didnt come with it's anyone know how to fix it

    PeeBee wrote:
    Does the MuVo work with Nomad Explorer? I didn't think it did.
    PB
    I'm pretty sure it doesn't. Perhaps there's some confusion with the MuVo Explorer, or plain Windows Explorer.

  • Nomad Jukebox DAP-6G01 With Windows

    <SPAN>I have a <SPAN>Nomad Jukebox DAP-6G0 and i want to know if i can use Windows XP with it because i heard that you can't and just want to make sure that it will work so if anyone knows please help me THANKS.<SPAN>

    "J" ... I'm able to download the st item: Creative NOMAD Jukebox driver (844.50KB) ... when it finishes installing, I get a window stating "Please reconnect your device for the driver to take effect". I already had the Jukebox connected. I downloaded with in connected/disconnected ... both times the message showed up. I believe the driver successfully downloaded so I moved on to the 2nd item you stated to download.
    2nd Item: I started the download of Creative MediaSource Player/Organizer 3.30.2 (52.2 MB) ... it self-extracted then the install wizard began ... it appeared to be working however, I window popped up with the title "CMS Web Installer - Installshield Wizard" ... the message in the window stated "Setup is unable to detect a supported product on your system. Click the retry button to re-detect your device and continue the installation. Click the cancel button to quit the installation and go back to your windows desktop" ...
    I got frustrated at the point and didn't move on to the 3rd item you mentioned to download "Creative Mediasource - Nomad Pack for Creative Nomad Jukebox/Jukebox C (version .0.04) (3.2 MB)
    Eric
    Feel free to e-mail at:
    [email][email protected]][email protected][/url]

  • Please assist with Creative MediaSource installat

    I'm installing the Creative MediaSource software for my new NOMAD Jukebox Zen Xtra 40GB and I've been given the option of installing any or all of the following components:
    - Creative MediaSource Nomad 2/3/Zen Plugin
    - Creative MediaSource Jukebox Plugin
    - Creative MediaSource MuVo Plugin
    - Creative MediaSource II / MG Plugin
    - Creative MediaSource Player Skin Pack
    It seems to me that some of these are unnecessary in my case. Can anyone suggest which of those options are necessary for proper use with my player?
    Thanks for the guidance!

    Those plugins are there only if you have any of the other players listed so that Creative Mediasource will recognize them when they are being plugged into your computer. But you still probably need to install their drivers. As long as you have the drivers to recognize your Xtra in Windows, then Creative Mediasource should have no problem syncing with your Xtra.

  • Problems with Creative MediaSource Organi

    Please help me!!!
    The media library doesn?t show the tracknumbers but the WMP 0, the WindowsExplorer and Winamp 5. show them correctly. I don?t know what to do!

    Have you:
    <FONT face=Helv size=2>
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - (Depending on your firmware)
    Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
    or:
    Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
    - Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
    - Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

  • Cannot play audio CD with Creative MediaSource Pla

    Hi All,
    I recently installed an Audigy 2 ZS Platinum soundcard and the Creative MediaSource Player software. I also purchased Creative 5. Analog speakers. Have everything configured pretty well now and really enjoying the enhanced sounds!
    My problem is that I cannot play audio CDs using the MediaSource Player. I can see my DVD Player and CD Player in the MediaSource Player 'Source' column and a list of all the tracks on the CD. (no track info, just track numbers and length)
    When I double-click on a track it cycles through all the tracks and then places an 'X' next to each one in the 'Now Playing' list window. If I have other music files from my harddri've available, it will start playing one of them.
    I've tried different CDs with the same results.
    I can use both the DVD and CD dri'ves to play an audio CD if I use any other player (Winamp, Windows Media Player, etc.) and use both dri'ves everyday for loading software and reading files. It will also read the demo DVD Audio disk that came with the card using the DVD-Audio player they provide so I'm pretty sure there's nothing wrong with the hardware or drivers.
    I've read all the info that came with the card and on the Creative Web site and have been through every configuration screen multiple times but haven't found a switch that turns this feature on.
    Would like to get this working so I can standardize on one player that allows me to use all the advanced features of my new card.
    Thanks in advance for any light you can shed on this.
    Jay Perez

    A good way to see what kinds of things you might need for something like vlc is to look at the optional dependencies for the package.  So if you do pacman -Qi vlc if the package is installed on your system already, or pacman -Si vlc if not yet installed, you can see in the output what kinds of optional dependencies there are.  Typically there is a short description of the extra functionality that the optional dependency can provide as well. 
    So in the case of vlc (and the libcdio optional dep) I get:
    $ pacman -Qi vlc
    Name           : vlc
    <SNIP>
    Optional Deps  : avahi: for service discovery using bonjour protocol [installed]
                     <SNIP SOME MORE>
                     projectm: for ProjectM visualisation plugin
                     libcaca: for colored ASCII art video output [installed]
                     libgme: for libgme plugin [installed]
                     librsvg: for SVG plugin [installed]
                     gnome-vfs: for GNOME Virtual File System support
                     libgoom2: for libgoom plugin
                     vcdimager: navigate VCD with libvcdinfo [installed]
                     xosd: for xosd support
                     aalib: for ASCII art plugin [installed]
                     libmtp: for MTP devices support [installed]
                     smbclient: for SMB access plugin [installed]
                     libcdio: for audio CD playback support [installed]
                     ttf-freefont: for subtitle font
                     ttf-dejavu: for subtitle font [installed]
                     opus: for opus support [installed]
                     libssh2: for sftp support [installed]
    <SNIP>
    Last edited by WonderWoofy (2013-08-24 18:45:56)

  • Problems with Creative Mediasource-shutting d

    For the past 24 hours I have been unable to use Creative Mediasource. Every time I get into the program to transfer songs from my computer to my MuVo a window pops up saying that there is a problem and Mediasource has to shut down. Then Windows sends an error message report. I have uninstalled the software from my computer and reinstalled several times but it isn't helping at all. I have no idea what's going on at all.
    Can anyone help? I have Windows XP and MuVo TX, G of memory. This is so frustrating and I have no idea what is going on.
    Thanks.

    Gabrielle33 wrote:
    For the past 24 hours I have been unable to use Creative Mediasource. Every time I get into the program to transfer songs from my computer to my MuVo a window pops up saying that there is a problem and Mediasource has to shut down. Then Windows sends an error message report. I have uninstalled the software from my computer and reinstalled several times but it isn't helping at all. I have no idea what's going on at all.
    Can anyone help? I have Windows XP and MuVo TX, G of memory. This is so frustrating and I have no idea what is going on.
    Thanks.
    Here is what you should do:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.
    - For NOMAD MuVo series: Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.

  • Problem with Creative MediaSource and Zen Ex

    Earlier today my Creative MediaSource software (the Organizer) stopped detecting my Zen Extra (60GB). I have uninstalled and reinstalled the software several times.
    Everytime I try to open the MediaSource Organizer, I get the following:?[size="3" color="#0033ff">Creative MediaSource Player has encountered a problem and needs to close.[size="3" color="#0033ff">?[size="3" color="#0033ff">Error Signature: [size="3" color="#0033ff">AppName: ctcms.exe AppVer: 2.2.5.0 ModName: ctcms.exe
    [size="3" color="#0033ff">ModVer: 2.2.5.0 Offset: 00098c[size="">
    ?Can anyone help me? How can I get the Organizer working again and how can I get it to detect my player. I have installed the firmware and drivers on this site, but nothing is helping.

    Try deleting the .dat file(s) under "C:\Documents and Settings\YourName\Application Data\Creative\MediaSource". It may solve the MediaSource crashing problem. To detect your Zen Xtra, you need to install its plugin for MediaSource. You may install it from your product CD or get the latest from the Web download. Here is what you should do:?- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.- (Depending on your product and firmware)
    For non-PlaysForSure Zen series: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
    or:
    For PlaysForSure Zen Xtra: Download and install the Creative Software Suite for PlaysForSure-enabled Creative NOMAD Jukebox Zen Xtra Players.
    - If it is listed for your product: Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

  • Creative mediasource player - track order prob

    I imported a lot of?albums I downloaded from Napster on to the creative mediasource player on my pc. when i try to play albums via this player on my pc the tracks are all out of order (eg track3, track , track2 etc) and I cannot work out how to get them in the right order. i have just looked at a few albums and just realised that it is sorting the tracks in alphabetical order of the track names, not track number. anybody got any ideas how to get it in track order?thanks

    Just click on the column header to sort by Track Number. Creative MediaSource will play in the order that you see.

  • Creative ZEN 4gb compatible with Creative MediaSource

    Hi,
    I was just wondering if I can use my new Creative Zen 4gb with Creative MediaSource. I really like MediaSource and I would prefer to use it the only problems is when ever I connect it its keep locking up and crashing especially when I go to creative playlists. I used to use mediasource for my Zen Micro. Any suggestion? or does creative no longer support MediaSource with there new players?Thanks!

    Strife04 asked the following:"Hi, does anyone know which Creative MediaSource Player/ Organizer is compatible with the new 4gb ZEN and if there is one, where it can be downloaded? thanks in advance.":?My reply:Which 4gb Zen?I have the Zen V Plus 4 gig and MediaSource Player/Orginizer running on a?Windows XP SP2enabled Dell.
    This works fine for me.

  • Creative MediaSource Player/Organizer compatible with the new 4gb Z

    Hi, does anyone know which Creative MediaSource Player/ Organizer is compatible with the new 4gb ZEN and if there is one, where it can be downloaded? thanks in advance.

    Strife04 asked the following:"Hi, does anyone know which Creative MediaSource Player/ Organizer is compatible with the new 4gb ZEN and if there is one, where it can be downloaded? thanks in advance.":?My reply:Which 4gb Zen?I have the Zen V Plus 4 gig and MediaSource Player/Orginizer running on a?Windows XP SP2enabled Dell.
    This works fine for me.

  • Media Source - 'file of this name already exists' transfering tracks from Zen Micro to

    I've come home for the weekend, and I'm trying to transfer a few albums from my Zen Micro to my Mum's PC for her. Normally this works fine, but for some reason today I keep getting the message 'A file of this name already exists' for about 80% of the tracks I try to transfer. One or two tracks from each album will work and the rest will fail.
    These are new tracks and they definitely aren't already in her music library - I've double checked the C dri've too.
    I'm given the option to overwrite the exisiting tracks, so I gave that a try with one album, but the tracks still aren't didn't show on there once I'd transfered, despite the track number not going up, so god knows what's been overwritten with those!
    Can anyone help?
    Cheers!

    Your firmware is not the PlaysForSure version.
    Anyway, I just want to make sure that you have set up the directory and file naming convention correctly for MediaSource. Here is what you should do:
    - Launch Creative MediaSource Oragnizer.
    - Go to Tools->Settings->PC Music Library and click Properties. Set your preferred folder and file naming convention. Close the setting page.
    - In the Sources window, click to view PC Music Library.
    - Go to View->Right Panel View and select to view your MP3 player.
    - Transfer the tracks from your MP3 player to MediaSource's PC Music Library by clicking the arrow pointing from right to left.
    - If you have updated the track information of the tracks in your MP3 player, the updated track information will also be imported into the PC Music Library database. However, the tags of the files are not updated. Here is what you need to do. Right click the PC Music Library node in the Sources window or right click on any tracks in the PC Music Library window and select "Update Tag". This will update the tag of all the tracks or the selected tracks with the track information as seen in the PC Music Library.

  • How can I use all tracks from multi-channel source audio with Multicam clips?

    I cannot figure this out. Working in Premiere I'm prepping for a 2 camera show, with typically 4 to 6 track dual-system audio recorded by the sound guy. I can sync, and make multicam clips any number of ways–whether sync by timecode, sync by audio, or eyeballing–but whenever I edit using the MC clip, Premiere mixes down all the audio channels into a stereo single track, and I cannot pick and choose which audio track from the original to use. With 2-5 people mic'd on lavs, I need to be able to choose which audio is either cut in or heard at any given shot.
    Is there any way to have control in multicam clips over which track of audio gets edited into the timeline, or even: that all tracks of audio get cut in? It's very important for the editors to be able to see waveform (which also disappears for some reason in the mixdown) and pick and choose which audio is heard?
    I'm sure this might be a simple fix, but I cannot get my head around it for workflow purposes for my assistant editors. We need to use multicam, but this audio thing is driving all of us crazy. None of us can figure out how to have a multicam clip and use it with control over what audio is cut in.

    True, but what I need to be able to do is have my multicam sequence in the source monitor, and cut into my working sequence with either just the audio I need from the sound guy's multi-channel WAV, OR cut in all the sound and from then I can just enable or disable what I need or don't need. But also be able to match back to the Multicam source from my working sequence.
    I don't want to have to open the synced sequence, and razor blade the things I need and have to copy and paste into my working sequence in order to have the full spectrum of my multi-channel mono lav WAV files...with their waveforms visible.
    Essentially, I want my Multicam clips to load in the source monitor, and the ability to cut them into the working sequence without it mixing down the audio into a single track with no visible waveform–which is what it is doing currently. Can I choose to edit in either ALL of the tracks of the WAV file along with the camera shot I want, or control which audio gets cut in?

  • Vista with Creative Media Player keeps stoping during transfers to my Zen To

    After my old computer crashed I purchased a new computer with Vista and like many others I went through the process of updating the firmware on my Zen Touch on another computer with XP and Windows MediaPlayer 0. I followed all the steps, including updating to the latest Creative Media OrginazerPlayer(5) and Play for Sure updates. Of course I lost all my music on the ZenTouch but I had my music saved on a external hard dri've. I loaded all the songs to my new computer and added them to the library for the Creative Media Player. Next step was to add them back to my Zen Touch. Becasue I had so many specialized playlists this process was going to take forever and would have to add songs one at a time. Everything was working great at first. I had no problems with Vista recoginizing everything and it all seem to function well. As I started to transfer songs to Zen Touch everything also went fine at first. Once I got through a few hundred songs the Media Player keeps stoping (atleast that's what the window that pops up says). I can sometimes go on later and transfer a few more songs but only a few and then it stops again and again and again. The ZenTouch is fully charged and being detected so the answers I've seen posted don't help. I've done so much to get everything to work and now this.... I running out of patience. I really don't want to start over or use the Windows Media Player if I don't have to since I've created so many playlists on the Creative Media program.Any suggestions out there on how to solve the problem of the constant stopage of the Creative Media Organizer when transfering songs to my Zen Touch Sorry for the long post- just wanted to cover the fact of what I've done already so there won't be any reiteration of suggestions.Message Edited by mattkaetzel on 0-03-20082: AM
    Message Edited by mattkaetzel on 0-03-20082:2 AM

    Older Creative HDD-based players with special drivers (PDE), such as the Jukebox Zen,?were not supported past Windows XP. [url="http://mrinternet.wordpress.com/2007/03/0/creative-zen-nx-and-vista-working-together-finally/" rel="nofollow">This site[/url]?(thanks coachop94) describes someone's effort to get PDE drivers to work in Vista; try at your own risk. If that doesn't work, you'll have to transfer your files off the Jukebox Zen using an older computer (XP or earlier).
    Also, if you have MediaSource 5 you should also have installed the appropriate plug-in from the Jukebox Zen support page.

  • Nomad Jukebox Zen Xtra VS Winows Media Player - Help?

    I have a 40gig Nomad Jukebox Zen Xtra - a computer crash a year ago resulted in a replacement by the computer company - and it came with Windows Media Player.... when I tried to run it and had already installed the Creative software/Music library - Media Player crashed my computer every time - had to uninstal...,. now - that computer is defecti've and has just been replaced again by the maker - and before I load the Creatai've Software wondered if this is what is interfering with Media Player? Does anyone know? When I buy music it looks for Windows Media Player I believe - and I can play it and transfer the music in Creative program - BUT - it no longer lists my music library as single songs but as folders - and I have to go specifically into a remote folder to try to find the downloaded music and transfer to the Nomad....
    Any help is appreciated..... I'm lost!
    Thanks
    KB

    The firmware update only works on a windows XP machine.
    you also need to have Windows media player 0 installed
    you must not have windows media player or windows media player runtime lurking in your windows XP add/remove programmes bit on the control panel.
    if you do have WMP first remove it ( roll back) then re-boot, then remove windows media player runtime ( rioll back) and re-boot.
    open windows media player, if it is windows media player 0 then you should be OK, if its windows media player 9 you need ot download and install windows media player 0.
    Check again to make sure that windows media player and windows media player runtime are not in the add/rmove programs.
    Back up everything on the player, all music, playlists and data files.
    update the firmware.
    if it stalls part way, like it did for me the last time i updated a Zen Xtra ( last weekend -installing a new motherboard ) dont panic.
    it will go to rescue mode, close the firmware update, the player will go to rescue mode, then re-satart the update, on the zen xtra, slect re-load OS then on the firmware update click on English. then slect re-load os on the player.
    make sure that the player is fully charged, and that the mains charger is also attached.
    just out of interest, when you remove the front panel on your zen xtra to get to the battery, does the headphone jack ( visable through a hole in the top right) have a blob of red paint on

Maybe you are looking for

  • Screen freezes and tares up into pixels and stops working?

    I have run the EtreCheck  with these results: Problem description: When I am moving the pointer around my email.app, the screen starts breaking up into pixels that flash on and off. Enough that I made a video (11 sec) showing this before I shut down

  • Generic working in eclipse compiler but not through builds

    The following code snippet works fine in my eclipse development environment (1.6.0_06), but the build system running 1.6.0_06 throws exception: MyClass:343: incompatible types found : java.util.List<C> required: java.util.List<B> entries = createList

  • How can I increse the hight of my tab bar?

    When I try to move my browser over I find the Tab Bar too short and I often grab and move or delete a Tab. I need to make the Tab Bar taller.

  • Using film contact prints for image catalog, & making frame choices

    In addition to importing new digital images and scanned film images to LR, I've started scanning contact sheets to create a key-worded catalog of earlier work for myself and others to easily use. This has been working very well for finding images, bu

  • The Message Pane shows up even when selected not to.

    When I open Thunderbird the Message Pane shows up. I have gone to View, Layout and deselected the Message Pane but it will show up again when I open Thunderbird. When I look at the layout again, the Message Pane is checked marked again. I have to des