Transferring Videos to 30GB iPod - Suggested download does NOT work!!!

Hi,
I have downloaded the trial version of Videora, but it will not open. I get the following error message:
"The application failed to initialize properly (0xc0000135). Click on OK to terminate the application"
The Videora iPod Converter has the same problem. Can anyone please help me???
Anthony.

You will get answers on Videora here:
http://www.pspvideo9.com/forums/viewforum.php?f=18&sid=c78a3dd31eeda96bccd9dd565 f26a4b6
Athlon XP+2600   Windows XP  

Similar Messages

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • OTN Jdeveloper Download does not work!

    The JDeveloper download does not work. After entering the questions a 404 error page appears.
    Waht is going wrong here?

    Hello Reinhard:
    I finally [after over a week of trying]have JDeveloper 10.1.2 downloading. Question is... will it work [not be corrupted!} Reply here and maybe the two of us can figure a way to get it to you.

  • Maverick download does not work ??

    Tried it from Lion actual-everything.
    Download does not work.
    How to solve ?

    But I don't see the newer version and thats the problem.  I downloaded the newer version one on my ipad so I could view these documents (I use icloud), and if that is the problem, I don't know.  I do not see any icon at all with the newer verson on my imac and I'm scared to delete the old version on my imac until I'm sure I have the new one

  • Serial number provided with download does not work, now what?

    serial number provided with download does not work, now what?

    Chrish29593217 you are welcome to contact our directly at Contact Customer Care.  What Adobe software title are you facing difficulties with?

  • The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

    The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

    Apple will exchange your Pod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like this one is less expensive.  Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Hi! With version 36 I can no longer download videos; I can watch them, but download does not work. I use Win 8.1 and download helper. I returned to 35.1

    Hello Community of Users
    I actually want help from the experts; and with my question everything is said. As I wrote: I returned to version 35.01 (US - before I had a German version - both worked or work) for the time being; with 36.0 almost everything is fine except that I cannot download videos any more.
    The " educated guesses" seem to be correct except for the Shockwave; at least I couldn´t find it in the list.
    Oh, I forgot: I got a message from my firewall when I had downloaded version 36, stating that it had blocked some features of this app, then listing those features, but giving the possibility to grant access to them ("Zugriff zulassen") on which I clicked. - See uploaded screenshot.
    Any idea where the problem could be?

    Hi edmeister
    thanks for dealing with my Problem. I´m using the latest Version of downloadhelper; I mentioned that I downloaded the US-Version of 35.01, but the screenshot came from my German Windows 8.1.
    I just downloaded 36 again & separately, got the same warning from Windows, clicked again on "grant Access" (Zugriff zulassen), tried out parallel 35.01 - Video download o.k. and 36 - Video download did not function. So I did not get further. The Firewall lets me - so it seems - download with one Version of Firefox and without any changes executed does not let me download with the new one.
    Greetings
    Faustissifus

  • Download does not work

    I am trying to download cs6 production premium, but when i try to download on akamai the download "finishes" the first part of the download, and then restarts the entire download, over and over again. Also, when i try the alternative download some of the files are not extracted when i run the .exe that is supposed to extract the .7z file. When i try to extract the .7z file myself (attempted with both winrar and 7zip, it gives me a message that says some of the files are corrupt/broken. I've tried restarting my computer, changing permissions on the computer, and any other suggestion given on the help page, and I also searched the forums to see if i could find a solution. I have also recieved the message that i may not have enough memory on my computer, but i have over 500 gigabytes of free memory.

    I tried both explorer and chrome with the same result, but when i tried firefox, when part one finished the download stopped and said it had an error of "Content validation error(invalid content)" and the alternate download still did not work. I looked at the akamai netsession interface console and it says that the data for part two of the download (the .exe file) is "unavailable", but the part one downloaded to 100%
    **EDIT**
    I found a discussion here http://forums.adobe.com/message/4455799 which led to here http://forums.adobe.com/thread/981369 which had a solution by going to the link here http://prodesigntools.com/adobe-cs6-direct-download-links.html and doing a different, direct download

  • Transferred a Zynga game and now it does not work correctly

    I transferred a Zynga game from FaceBook and now it freezes up does not show certain goals I've done and have problems visiting neighbours
    == This happened ==
    Just once or twice
    == Since I transferred the game

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Ipod click wheel does not work at all..

    I gave a friend of mine my 4g photo. It worked for him for a few days and then stopped. He brought it back to me and I restored it twice back to factory settings. Still nothing. The other weird thing is when you cycle between hold and on, it starts the ipod like it is an on and off switch. The click wheel does not respond, and the hold thing is just weird. I just would like to know if this is a hardware problem, and if there is anything I can do to get it up and running again.. thanks...
    Macbook Pro 15"   Mac OS X (10.4.8)  

    hi muddy angel, recently i had a problem that sounds similar. my well cared and little used 40gb ipod didnt respond to the clickwheel -no reason that could be recognised. gravis in berlin, germans probably biggest apple dealer, checked the item. they told me it would be a rare, but well known very unlucky thing that clickwheels sometimes just give up their functions for unknown reasons. unfortunately my clickwheel did so, after the warrenty has run out a couple of weeks ago and as well annoying is the fact that a replacement of the clickwheel is horrible expensive. so, if you have the opportunity to have your ipod checked by a hardware pro - try it.

  • IPod Remote application does not work with Ethernet

    I can control iTunes on my MacMini from the Remote application on my iPod Touch only if the Mini is connected to the router by WiFi, but not if it connected by Ethernet cable. Unfortunately, I need to connect the MacMini to the router by Ethernet (because of another problem), but this is preventing me using the Remote application.
    The wireless access point is an Airport Express connected to the router by Ethernet cable. The iPod Touch communicates with the Airport Express.
    The Remote application cannot find my iTunes music library. However it can connect to the MacMini using "ssh". When I select "Add Library" on the remote, the iPod does not show up in iTunes on the Mini. I have tried turning off the firewall in the MacMini but this does not help. However, if I connect the MacMini by WiFi instead of Ethernet cable, it works fine.
    My router has a firewall between the Internet and the LAN, but not between the LAN ports. I also cannot see any settings on the Airport Express that might block this connection.
    Any help would be appreciated.

    similar (unresolved?) issue here https://discussions.apple.com/message/9480306#9480306

  • SAP ViewPoint download - does not work

    Hello SDN folks -
    I was eager to try out SAP Viewpoint (available from the SDN download area.)  I downloaded and successfully installed it this evening.
    However, when I tried to use it, I received the error:
    "Evaluation term has expired"
    According to the license, the term is for 60 days.  And, I just installed it.  The software does not have a licensing component to enable (from what I can see).
    Any ideas?  Thanks for your assistance.
    Kind regards,
    Steve

    Hi,
    I have not tried JCMON, and I do not know him !!! Could you explain to me how to use it ?
    I should be grateful
    In response to vijay kumar : I have no problems with the space of the Hard disk and RAM capacity, and it is possible to install SAP NetWeaver in Win XP.
    Thanks & Regards
    Hassan

  • Very bottom of iPod touch 4g does not work correctly.

    I have tried, resetting it, turning it on and off of course. Nothing appears to be working, but the odd thing is, I can slide it to unlock easy enough, and the bottom tabs on the home page work fine, but the bottom part in Saffari or any other tab/app, will not work, for example: I cannot type: "." "space" "123" or any of those, which gets really frustrating, I was just wondering if there is a way to sort this, as I have seen that it is a very popular error among the iPod touch's. Any help would be greatly appreciated. Thank you.

    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store since it now appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Brand new ipod Touch (8GB) does not work with DHCP

    I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

    its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • HT1789 ipod generation 5 does not work backlight

    my ipodolution. 5 th generation backlight is not working.Help me for solution
    THANKS

    Hello Devendra dalal,
    It sounds like your iPod Nano screen is not lighting up but the device appears to be on. If you have done the troubleshooting in the following article:
    iPod nano (5th generation) Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/nano5gen/
    I would next seek service for the device:
    Service Answer Center - iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for

  • ICal locations stopped reporting busy?!?!

    Greetings, I am running Lion Server 10.7.4 and have been running the iCal server for a month or so with no problems. (other then outlook not talking to it!) Yesterday we started to experience that when we are setting a meeting and slection on of the

  • Video screen caps

    I can't seem to figure out how to do this right - I always tend to get just a blue background.... I've been using import to take a snap of a full screen xine window... *thumbs down* Is there something I'm not doing right?

  • U330 System Image = System recovery disk?

    hi all i have created a system image into a portable external harddisk for my U330 laptop. once that is done, i was prompted if i want to create a system recovery disk. just wondering, do i still need to create a system recovery disk if i have alread

  • Define traffic light in MD04

    Hi Gurus, Can anybody please explain me the define traffic light button in MD04 in detail Thanks Anusha

  • Change of material master during transfer between SRM and R/3

    Hi, I have a question for modifying material master data between R/3 and SRM. I would like to know if it is possible to change the material number during the transfer. The reason is: I have 2 R/3 backends and 1 SRM system. The material codes in the 2