Transfert between Labview and HTML page

Is it possible to transfert data between LABVIEW and a HTML page without using a java applet?
Is Labview including this possibility?
The aim is to pilot a system via internet with a html page.

Hi Mat,
LabVIEW CGI is the best solution for that. I know that you can build ActiveX controls (in Visual Basic) that talk to labVIEW. But LabVIEW CGI is the easiest way of doing that. You should have some knowledge of HTML inorder to work with LabVIEW CGI.
Also note that in order to have the LabVIEW CGI capability you should have Internet Toolkit for LabVIEW (available from NI). For more information
http://www.ni.com/labview/internet/
The examples that ship with the toolkit should get you started on it. LabVIEW CGI VIs would allow you to execute VI from web browser and get results back in web browser in form of HTML page.
Hope this helps,
A Rafiq
National Instruments
Hope this help.

Similar Messages

Diff between logical and physical page ?

hi
what exactly difference between logical and physical pages?
where to set page size in report designer?
after seting paper size in report designer can i readjust in print dialogue box?
which is will be effected?
please explain

A logical page can contain several physical pages. Assume you want to create a format which is larger then your printer is able to print, then you can define a logical size, which contains n pages horizontally and m pages vertically.
To set the page size for your report have a look at the properties in the main section of your paper layout.
Regards
Rainer

Communicating between LabVIEW and Basic Stamp 2.0

Hello,
We are trying to control the movement of a Parallax Boe-Bot (robot with
Board of Education) via LabView programming. The BOE operates on
Basic Stamp programming to control the pulse width sent to two servo
motors.
Is there a way to establish communication between LabVIEW and Basic
Stamp 2.0? We need to send commands from LabVIEW to the
Basic Stamp to control the pulse width and therefore the rotation of
the two servo motors. We also need to send a signal from an
accelerometer based on the robot to the LabVIEW ADC.
The ultimate goal is to do this with wireless communication, but for
right now we are simply trying to figure out any way to send the data
between LabVIEW and the Basic Stamp.
Any ideas?
Thank you,
Adam

Hi Adam,
You can communicate with a BASIC Stamp microcontroller over GPIB using VISA. To see some LabVIEW example code, just search for GPIB in the NI Example Finder (Help>>Find Examples). This will show you the basics of GPIB communication in LabVIEW. I also found this link by searching the NI discussion forums for "basic stamp"
http://www.parallax.com/html_pages/downloads/software/software_basic_stamp.asp
Here you can download an example using LabVIEW 7.0 or higher to communicate with a BASIC Stamp 2.
I hope this is helpful! Let us know if you have further questions.
Megan B.
National Instruments

Can insert and html page inside a symbol

How can I insert and html page in a symbol
By example: One Menu with five options. When click in option one: showme www.google.com; when click option two then show www.adobe.com...
Sorry for my poor english.
Thanks
Now in spanish
Buenos dias
Quisiera saber si existe la posibilidad de visualizar una pagina web en un symbol, de manera que dependiendo de un menu, me muestre una dirección u otra.
No se si esto es posible, porque soy muy novato en esto.
Les ruego su ayuda.
Gracias y saludos

>thx for reply
>i used Iframe anyway
>btw im noob in html =.=
Iframes are usually a terrible solution, in my opinion. If
you need the background fixed, why not just set it to fixed rather
than introducing fames and all of the problems they bring? Do you
have a url?

Reference Library for Converting Between LabVIEW and XML Data (GXML)

Please provide feedback, comments and questions on the Reference Library for Converting Between LabVIEW and XML Data (GXML) in this thread.
The latest version of the NI GXML Library is availble in VIPM on the NI LabVIEW Tools Network repository.

Francesco, Thank you for the feedback. With this component it was my intention to make a more "terse" version of the LabVIEW Flatten to XML VI that was also supported on RT and that gave the user more flexbility regarding the structure of the parsing type definition. I think you are right that the XML parser is not compliant to section 2.11 of the XML spec. The parser does specifically looking for a #D#A and this appears to be an oversight on my part. Please confirm for me, the specifcation is saying that the XML parser should be able to recognize three possibilities as an "end of line" character: #D#A, #D, or #A. Am I reading this right?There are more efficient (and in some cases much more efficient) ways of sharing data between LabVIEW and LabVIEW: some examples are flattened binary strings and the datalog binary format. XML is slower than these optons but the upside is that it is human readable. Furthermore XML is inherently hierarchical which is convenient for complex data structures like clusters of arrays of clusters, etc. If you don't care about human readability then you are correct XML doesn't make as much sense.I will return to the GXML source code and try to fix this in the near future but I would hope that instead of creating yet another custom VI from scratch that you could reuse what I have provided for you. I included enough documentation in the source code so that users could make some modificiations themselves. The target application for this reference library was LabVIEW to LabVIEW communication. As such I documented the schema on the dev zone document from a LabVIEW perspective. It includes all the supported datatypes and all the supported data structures (cluters, arrays, multidimensional arrays, clusters of multidimensional arrays, etc.) I do see some value in making a more conventional XML spec but the time investment required didn't really line up with my intended use case. Were there any other downsides to GXML that I have missed? Best Regards, Jeff TippsSystems Engineer - Sound and VibrationMessage Edited by Jeff T. on 04-21-2010 10:09 AM

Connecting between labVIEW and PLC S7-1200 using EPICS

Hello everyone,
I'm trying to connect between LabVIEW and PLC S7-1200 using EPICS. I did it using OPC and it succeeded and the communication was done, so right now i'm trying to do it using EPICS. so Can anyone help me with that?
Thanks in advance.
Ahmed

Hello,Ahmed:
Now I'm trying to conect S7-1200 to Labview by OPC server 2012, I'm newer for both PLC S7-1200 and OPC server. by the help file of NI's OPC I tested many times, but lost totally.
You mentioned that you have succeeded making the connection between them, could you please help me :
1) How to set in Simense TIA software? I can set the PLC's IP address now, that's all;
2) OPC server setting.
if there is a video, that will be great.
thanks a lot.
Delphi77.

How to visualize relationship between templates and instanciated pages?

Dear all,
I built about one year ago a complex site using DW CS3 templates and nested templates (currently using CS4).
I would now like to modify this site, but cannot remember the nested structure I defined between my various levels of nested templates, nor what instantiates pages derive from what nested template.
This is probably obvious, but I cannot seem to find a way to visualize the relationship between the nested templates:
- what templates is the parent of what nested template?
- what page derives from what nested template?
I have already spent two hours reading various help pages... nothing... How can this be done?
Thank you in advance,
Regards.
Bernard

The easiest way that I know of is this:
Go to a page that is based on a template
In Code View, select the beginning of the Template call code at the top of the Head, e.g. <!-- InstanceBegin template="/ (use only this fragment to get a list of the entire site pages that are based on templates)
Search (Ctrl-F) Entire Current Local Site, Source Code, Find All
The Results Panel will then display all pages that carries that code
To save this list as a file, click the disk icon that appears two down from the flippy triangle on the left side of the Results Panel
This will give you a list of all pages based on Templates, and will also indicate...in the "Matched Text" column of the Results, the Template that is in use for each page.
You will notice that the files are listed out in alpha order, root folder top level first, then successive folders, including the Templates folder. Listings of the Templates folder show the Nested Templates and, to the right, the Templates they are based on.
This is not a one-button solution, but should serve.
A suggestion for your future Templates and Nested Templates is to be very explicit when you name them, for instance, "masterTemplate", "indexTemplate.dwt", "innerTemplate.dwt", "galleryTemplate.dwt", as suits your site.
When I prepared a site for use with Contribute, every page was slightly different, and I controlled variations by making different Nested Templates. I ended up with practically one Template per html page, but it was easier to control the client's Contribut-ions that way.
Beth

Federated Portal Content and HTML Page Navigation

I have an HTML Landing page for several worksets that is hosted off of a static content server to reduce lag time from things like KM iViews.
However, these landing pages have links to various iViews in the portal using the return EPCM.doNavigate('ROLES//:pcdlocation')".
Currently, I need to figure out how to have this HTML page load an iView from a content portal while linked from a Producer Portal. Any thoughts?
Edited by: Edward Monical-Vuylsteke on Jan 7, 2009 4:42 PM
Edited by: Edward Monical-Vuylsteke on Jan 7, 2009 4:42 PM

Hi Steve, thank you for responding.
I tried using xfa.host.setFocus("xfa.form.form1.ConsentForm"); I tried using setFocus("ConsentForm") and setFocus("form1.ConsentForm").
Am I not using the correct syntax?
james

Flash image and html pages

I do have an SWF sequence of images in the main html page. In
the second page I do have sections. Each section has a title of an
image of the SWF file. The role of this section is to describe the
image.
I trying to whenever I click on each image of the SWF in the
main page, I should be directed to its description in the second
page, meaning, that the second page should be loaded and its scroll
down bar should go down and stop where the specific section
(describing the image I’ve just clicked on) starts.

I do have an SWF sequence of images in the main html page. In
the second page I do have sections. Each section has a title of an
image of the SWF file. The role of this section is to describe the
image.
I trying to whenever I click on each image of the SWF in the
main page, I should be directed to its description in the second
page, meaning, that the second page should be loaded and its scroll
down bar should go down and stop where the specific section
(describing the image I’ve just clicked on) starts.

Establish connection between labview and Lantronix XPort Pro

Hi:
I am pretty new in this field. I just got into grad program, and I have been asked to establish a TCP/IP connection between Lantronix XPort Pro and labview 8.5. The goal is to get data from the server (Lantronix XPort Pro) and put them into labview and modify them, then I need to send modified data back into server.
The server has registered into local network wirelessly, it has IP 192.168.5.117 in port 26.
I would really appreciate your help and comments.
cheers!
Kian.

Which field are you "new" to? Programming in general? Programming in LabVIEW? TCP/IP?
Have you taken a look at the TCP/IP examples that ship with LabVIEW? There are simple Data Client/Data Server examples that show transfer of data over TCP/IP. You will likely need to do something very similar. Does the XPort Pro have a TCP/IP listener running? Do you have a communication protocol defined?
Also, if you are new the LabVIEW, have you gone through any of the tutorials? To learn more about LabVIEW it is recommended that you go through the introduction material, tutorial(s), and other material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

Interfacing between labview and microcontroller using rs 232

hi my task is to generate a wavefrom of certain frequency and certain duty cycle in labview and feed it to pic18f452 microcontroller and the o/p of microcontroller when connected to CRO should display the same frequency and duty cycle which was fed from labview.
for that when i am sending decimal data from labview microcontrolle is receiving ascii data for eg 62(decimal) gives 36 and 32 respectively in microcontroller registers and when i use type cast function and convert the decimal data into ascii data and then sending it to uc it gives hex o/p so i am confused that how to solve this problem
pls guide me
thanks
satish

So your display from the uc is giving you a hex display instead of the ASCII representation? Are you using VISA to send a string to the uc? Is that string being represented as hex instead of ASCII by the microcontroller? I'm confused about what exactly your setup and problem is...

Interfacing between labview and microcontroller using rs 232

hi my task is to generate a wavefrom of certain frequency and certain duty cycle in labview and feed it to pic18f452 microcontroller and the o/p of microcontroller when connected to CRO should display the same frequency and duty cycle which was fed from labview.
for that when i am sending decimal data from labview microcontrolle is receiving ascii data for eg 62(decimal) gives 36 and 32 respectively in microcontroller registers and when i use type cast function and convert the decimal data into ascii data and then sending it to uc it gives hex o/p so i am confused that how to solve this problem
pls guide me
thanks
satish

Double post

Communications between LabVIEW and spectrum analyzer

hi, im a beginner in LabVIEW and spectrum analyzer, and im now trying to let LabVIEW captures signal coming from spectrum analyzer. i have all the required components needed but i have totally no idea how to get started, is there any exercises or labs available here?

It will depend on your method of communication with the device. If it is RS232 you can go to the example finder (Help > Find Examples) and search for RS232 or however you plan on communicating with the device. Or you can browse the catagories for examples on various topics.
Depending on the device the manufacturer may have LabVIEW drivers on their web site. But anybody will need more information on the analyzer and the signals before you can be helped.

Difference between .swf and html publishing

Hi,
I am creating a flash player to stream my .flv files, as I am
testing my results, I put my .swf and html files on my web server
and then test respective URL paths: For example:
http://mywebserver.com/video/file.html
http://mywebserver.com/video/file.swf
how come these file vary so much in size? when I call
http://mywebserver.com/video/file.html
on my browser; my player is very small. But, when I call
http://mywebserver.com/video/file.swf
I see the actual size.
Thanks,

Hi,
Open ur html with DW or notepad. Find the <embed src="
tag.
Then replace the width and height of the swf as u want.
When you tries to open the file.swf, it will hold the browser
width and height.
Regards,
Sankarapandian T.

Difference between pdf and html report format

Why HTML report printouts truncate from the right-end side, compare to the pdf report format ?, do i need to change anything
while running report through HTML format

The printing from html output is majorly affected by browser settings. Once you try to change the left and right margins in page setup before printing, I solved this problem in this way , it may work for you. Let me know if it works or if you overcome it by other ways.
with regards
wara

Transfert between Labview and HTML page

Similar Messages

Maybe you are looking for