Transforing data

hi all,
pl help me
how to transfer data from xl file to oracle by using sql loder?
pl give syntax for suck.
thanks
pavani

pl give syntax for suck.No, a simple 'thank you' will do.
;-)

Similar Messages

Is there any Reporting tool in ODI?

Hi
My Senario is like , am transforing data from one data base to another (some amount of data). i want detailed information about how much data shoud be transfered and how much pending .some period of time like weekly report or daily reoprt i need .So this type of senarios i get small information through opreater and i need a report of this .is there any way for that.some one is told like web client .
web client in the sence what? i installed any for that
can any help .
Regards
Raghav

Hi MA,
you said that ' you have a standard report in ODI operator or web client'.
web client means what how can reach my requirements. using with Oprater report genaration is possible ? or how ?
See using with 'sqlunload' also we can get some information like we can write select query and genarate some information also . but this is not sufficient i think also.
and u said u want personal reoprt don't forget DB Repository. whats that mean.
u didn't explained about specific report BO, Cognos or jasper report tools.
Finaly if am using Jasper Reports what is the procedure can uexpalin the steps.
waiting for ur Repaly
Raghav

Regording strctures very urgent

hi
experts can any body to help me pzzzzzzzzzzzzzzzzzzzzzzzz
thanking u
i have to structers s1 and s2 have same strcture of 5 fields each how
can we transfor data from s1 to s2

Hello,
If you have 2 structures with same fields then you can do the following
1) structure1 = structure2
2) move-corresponding structure2 to structure1
assuming structure2 contains the data
eg:
you have structure1 as
data:begin of structure1,
 bukrs like bsak-bukrs,
 werks like bsak-werks,
 end of structure1.
you have structure2 as
data:begin of structure2,
 bukrs like bsak-bukrs,
 werks like bsak-werks,
 end of structure2.
in this case if structure2 contains data...then
a)structure2 = structure1.
b)move-corresponding structure2 to structure1.
move-corresponding is useful if you have a few similar fields also
move also can be used for same structures and all similar fields
Reward if useful
Regards
Byju

Does ODI fit for this scenario...?

hi all,
i have 200 equipments(systems) per site . The no. of files / messages can be 2 per minute per equipment.it implies 400 files / messages per minute.
Now size of the file/message can be 3 MB to 20 MB per minute.
I want to take all this data and want to perform some validations, aggregations n all. Then i'l put this aggregated data into database from their
Reporting tools,Query builder 'n other Analytical tools will take data and will generate reports,dashboards etc..
Can i solve this problem using ODI tool...? i know i can't provide the solution for this problem using ODI only, i may have to use some other tools also with ODI.
I guess getting the data from equipments and performing validations, aggregations n all and loading aggregated data into database can be done using ODI....?
And for analytics have to use other analytical tools..?
So ODI + Analytical tools can be the solution...?
/mishit

Hi
My Senario is like , am transforing data from one data base to another (some amount of data). i want detailed information about how much data shoud be transfered and how much pending .some period of time like weekly report or daily reoprt i need .So this type of senarios i get small information through opreater and i need a report of this .is there any way for that.some one is told like web client .
web client in the sence what? i installed any for that
can any help .
Regards
Raghav

Urgent :Fetching CRM Activity categories to the master list category table

Hi all,
I am working with groupware Integration. I am following "Best Practice" that provided in help.sap.com
I m using mySAP CRM 4.0 it is in SP-09.
the problem is in "Fetching CRM Activity categories to the master list category table" for this I am refered
http://help.sap.com/saphelp_crm40/helpdata/en/56/0efff114e54f3394bde360f3bebb4b/frameset.htm
in this page says that "GWA_FILL_ACTCAT_TO_MASTERCAT" function module is used for transforing data.
but if i am checking in my system this function module is not exist.
Please give the way for solution.
Thaks in advance.
Sridhar.
Message was edited by: Shridhar Deshpande
Message was edited by: Shridhar Deshpande

Hi Shridhar,
I am also working on the same object .
"GWA_FILL_ACTCAT_TO_MASTERCAT" is not a function module it is a Program so pl. go to SE38 and execute the program.
Cheers,
Nilesh
pl. reward points if this helps out.

What is the procedure to transfor the data to idoc.

Hi Abapers,
What is the procedure to transfor the data to idoc.
I have added some new fields in my program. so now i need to transfer those same filed into IDOC.
Can any body tell me the procedure.
Points will be given.

Hi,
First of all, you have to find an EXIT in the driver program. In the exit, you have to populate the values to the new segments which you created.
Creation of custom idoc includes the following steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon Type the short text Enter the variable names and data elements Save it and go back Go to Edit -> Set Release Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon Select the create new option and enter a description for your basic IDOC type and press enter Select the IDOC Name and click Create icon The system prompts us to enter a segment type and its attributes Choose the appropriate values and press Enter The system transfers the name of the segment type to the IDOC editor.
Create IDOC Type
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter Click New Entries to create new Message Type Fill details Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back

Connecting in data transfor

I can`t conect in data transfer mode recentrly and I can`t figure out why. It says that the memory is used by another application, but all of them are shut down.
P.S. I have a N95 8GB Edition
Please help
You can run, but that`s about it.
Remember that: The only time a fighter has too much gas is when it's on fire.
[url=http://site.neogen.ro/f-22/]The 21 st century fighter site[/url]

Did you managed to solve the problem ?
You can run, but that`s about it.
Remember that: The only time a fighter has too much gas is when it's on fire.
[url=http://site.neogen.ro/f-22/]The 21 st century fighter site[/url]

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

Rep-1340 error for date type

I want to transfore forms date directly to report. then i use run_report_object function. But in forms i use datetime type replace of default date type. then the item can show time. then i revoke the report.rep-1340 error get. Who have better solution. thanks a lot.

Hi ...
pass thedate by a parameter list
but transform the date into char
with to_chat(the_date,format)
in report's query you will may do like this:
select ..... where query_date = to_date(the_parameter,format);
the formats must be the same.
Good look !
Ovidiu ANCUTA
[email protected]

XML data file links java and sap

Hi ,
Please help me this
How to connect xml file to java into sap
please send me sample scenario.
in java i call the this sap function module 'BAPI_MAT_BOM_EXISTENCE_CHECK'.
1. Check BOM existence with BAPI_MAT_BOM_EXISTENCE_CHECK
2. Exit BOM diff if BOM doesn’t exist
3. Read BOM structure with CSAP_MAT_BOM_READ
4. Compare SAP BOM items incl. subitems to XML BOM items and subitems

currently I use following methods tu opload and to transfor the xml into a string.
* Method to create XML from data file
CALL METHOD instance->import_from_file
    EXPORTING
      filename = gf_filename
    RECEIVING
      retcode = ch_retcode.
* Convert into XML-Stream
CALL METHOD instance->render_2_string
* EXPORTING
*    pretty_print = 'X'
    IMPORTING
    retcode      = ch_retcode
      stream       = lf_string .
*    size         = .
When I use read dataset the output of the xml is into an internal table where I have many lines depending on the XML data file, this means if my xml has 10lines the internal table of read dataset has also 10 lines but I need a string to make the transformation of the xml.

How to change date selections at Infopackage data selections in production sys

Hi All ,
we are loading data into Infocube from datasource ,one process chain for delta init with data transfor ,which has data selections at infopackage say 06.2014 and other process chain for delta which has same selections at infopackage . Now I want change this data selections at Infopackage level .
I Have tried to change these dates in data selections at infopackage level , tho I have changed and saved to future date at delta initial with data transfor ,it's keep coming back to 06.2014. Of course data selection at delta Infopackage level is faded .
I Want to set future date with delta int with disturbing delta loads . How to do it please .
regards
hari

Hi Ram,
We will load delta Intial with data transfer every weekend , and we run delta everyday , because we do delta init with data transfer with selections say ( 01.20011 to 12.2003 ) every weekend , hope I need to create new delta infopack with new data selections say ( 01.2004 to 12.9999) only to get update data in Infocube.
Please correct me if I am wrong .
Regards
hari

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Refreshing the Data from a embed view in a view container

Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your help

Aida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan

ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!

Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested.

Transforing data

Similar Messages

Maybe you are looking for