Transform Box Numeric Entry Error - HELP!
I am using InDesign CS3 on a G5 Power PC Mac with 2.5 gB of SD RAM. The problem that I am getting is with the numeric entry into the "Transform" box in InDesign.
It will only happen on large or complex files that I am working on, I will have a particular measurement - 125 mm - and I will want to subtract 25 from this measurement.
I place my cursor at the end of the measurement and type "-25mm" but the entry just seems to disappear. I then click again in this box (it does not matter what box within the transform window it is) and re-enter the measurement quickly and press return and the same result - it still retains the original measurement of 125 mm.
This does not happen with every measurement that I enter - but I seem to find that if I leave the program idle for a short amount of time that this issue seems to resolve itself. However, it does keep happening and I am losing valuable time in modifying a document.
If anyone has any solution - could you please let me know. Look forward to reading some replies over the coming days.
Regards, Shaun
Try just "-25", skip units.
Similar Messages
-
Can't Back Up Mail Due To Numerous EMIX Errors -- Help
When I try to drag my mail folder from Library to a backup hard drive, it begins to copy then quits, saying it couldn't read an .emix file. I delete that file, and the whole thing happens again. No matter what I try, it keeps finding .emix files that it says it can't read.
What is the problem here and how to I bypass it?
ThanksTJFR,
Welcome to the Discussions.
I have not had this problem, and I routinely do this? What type of accounts do you have? Did your mailboxes originate in an earlier version of Mail, and then were convert when you upgraded to Tiger?
More info, please.
Ernie -
I am trying to purchase effects for my ipad amplitube. Every time I attempt to purchase it says to contact itunes support. I then get a box that says error "0".
It is impossible to get support so I hope someone can HELP!http://www.apple.com/support/itunes/contact/
-
Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?
What does the error say?
A couple of thoughts: the file is corrupted or is password-protected. Corruption is more likely to cause Numbers to crash & Numbers cannot open password-protected Excel files. Try using one of the free Office clones & see what happens. -
How to fix numeric entry box in Curves adjustment layer?
In the Curves adjustment layer Properties box there are numeric entry boxes for changing input and output values. The first few times I experimented with changing the output values of a selected point in the R, G, & B channels, all went well. Now, although I believe I am using the same method, I can only access the input value box. The moment I click on the output value box both boxes black out and no entry is possible. I'm using the Windows version of Photoshop CC, so Tab doesn't work to get from the input to the output box. I have tried resetting the Preferences for Photoshop and that seemed to work once, briefly, but now that makes no difference.
I have fixed the problem with Adobe Customer Support Chat. The solution was to delete the Adobe Photoshop CC Settings folder. With Photoshop closed, open the Start menu and type %AppData% in the search bar (Windows 7); this takes you to the Roaming folder where you then navigate to the Adobe folder and the Adobe Photoshop CC folder. We removed the Adobe Phototshop CC Settings folder by dragging it to the desktop. Once it was established that this fixed the problem, the folder was deleted from the desktop.
Message was edited by: C55279
Problem solvedI've noticed that a few times on windows 8 32 bit, photoshop cs6 32 bit with 4gb of ram, a nVidia 8400 gs graphics card and open gl seems to work fine.
I guess that's probably some kind of glitch.
One way to get back the dropdown is to click on the Curves Display Options in the flyout menu and then just click OK in the dialog.
Added: It doesn't seem to happen if the crop tool is set to Classic Mode.
Message was edited by: R_Kelly -
Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
DBMS_LOB.LOADFROMFILE causes numeric value error
The code below causes a numeric value error when I do LOADFROMFILE. Do you have any suggestions. Thanks.
declare
locator bfile;
cloblocator clob;
buffer varchar2(1000);
lsize integer := 0;
amount INTEGER := 1000;
v_filename varchar(50) := 'notify_offer_tbl';
begin
locator := bfilename('IDEA_DATA_DIR','notify_offer_tbl');
insert into imsa.t_unix_logs values ('notify_offer_tbl', locator, empty_clob());
Select fileloclob into cloblocator from imsa.t_unix_logs where filename ='notify_offer_tbl' for update;
if dbms_lob.fileexists(locator) = 1 then
dbms_output.put_line('Exists');
if dbms_lob.fileisopen(locator) = 1 then
dbms_output.put_line('open');
else
dbms_output.put_line('close');
dbms_lob.fileopen(locator, DBMS_LOB.FILE_READONLY);
lsize := dbms_lob.getlength(locator);
dbms_output.put_line('File Length: ' || to_char(lsize));
DBMS_LOB.LOADFROMFILE(cloblocator, locator, lsize);
commit;
end if;
end if;
DBMS_LOB.READ(cloblocator, amount, 1, buffer);
dbms_output.put_line('File ' || buffer);
DBMS_LOB.FILECLOSE(locator);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error -- ' || SUBSTR(sqlerrm, 1, 200));
DBMS_LOB.FILECLOSE(locator);Yes. The column clobcol (in the SELECT in your example) should be set to empty_clob() or already contain a CLOB, before selecting the column value into the local variable. The example in the DBMS_LOB documentation page is misleading as it does not mention this.
Note also that it is best to use dbms_lob.getlength to establish the value for
the amount parameter.
Hope this helps others searching for information on this - I have spent some painful hours working this out!
Peter -
Numeric Overflow error on NPer function
I am trying to use this NPer function and it's acting real weird. If I use the same numbers that my database fields hold, it works and when I switch to database fields it works fine one time and next time I try to refresh data, it gives me this "numeric overflow" error..
In Crystal help example, they shows that the payment has to be a negative number. So I am following that. If i switch it to the positive number, then it works bit it gives me negative # of months plus it's wrong number.
Not sure whats going on and would really appreciate any help...
Thanks
RajPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly
-
Numeric overflow error using binary integer
Hi experts,
I am facing issue while solving a numeric overflow error. after analyzing we came to know that in the below code BINARY_INTEGER is causing the issue as input is exceeding its range. I tried to replace BINARY_INTEGER by varchar2(20) but its saying
"Error(580,20): PLS-00657: Implementation restriction: bulk SQL with associative arrays with VARCHAR2 key is not supported."
We need to remove this binary_integer. I dont know how to do this. Can anybody give some idea or what code change required here ? thanks in advance. Cheers.. Below is the code,
===================================================
PROCEDURE UpdateCost_
p_Cost_typ IN OUT NOCOPY CM_t,
IS
TYPE ObjektIdTab_itabt IS TABLE OF ObjektId_tabt INDEX BY BINARY_INTEGER;
v_cost_IdTab_itab ObjektIdTab_itabt;
v_CM_ID INTEGER := p_Cost_typ.costm.CM_ID;
BEGIN
SELECT CAST(MULTISET
(SELECT Costwps.CMKostId
FROM CM_Pos_r NRPos,
CMK_z_r costzpps,
CMG_Cost_v Costwps
WHERE NRPos.CM_ID = v_CM_ID
AND NRPos.SNRId_G = SNRCT.SNRPos.SNRId_G
AND costzpps.CM_ID = NRPos.CM_ID
AND costzpps.CMSNRPosId = NRPos.CMSNRPosId
AND costzpps.Kost_s = Kost.Costnzl.Kost_s
AND Costwps.CMKz_Id = costzpps.CMKz_Id
AND Costwps.TypCode NOT IN
(SELECT kw.TypCode
FROM TABLE(Kost.Kostwt_tab) kw
) AS ObjektId_tabt )
BULK COLLECT
INTO v_cost_IdTab_itab
FROM TABLE(p_Cost_typ.SNR_tab) SNRCT,
TABLE(SNRCT.Kost_tab) Kost
FOR v_i IN 1 .. v_cost_IdTab_itab.COUNT LOOP
FOR v_j IN 1 .. v_cost_IdTab_itab(v_i).COUNT LOOP
DELETE FROM CMG_Cost_v WHERE CMKostId = v_cost_IdTab_itab(v_i)(v_j);
END LOOP;
END LOOP;
END;
===================================================Thanks for your reply. I tried with INDEX by NUMBER. but oracle says its not a valid use of index by thing. and moreover I also tried with by removing INDEX BY clause. but in that case we are not at all getting any data in for loop. some people says to use extend clause. But again I am not sure How to do so. Can you please let me know code for this.
I know you are trying to help by you need to STOP telling us what problem you have and SHOW US. Saying 'Oracle says' is useless. Post EXACTLY what code you are using, the EXACT steps you are using to compile that code and the EXACT result that you are getting.
You also made no comment about the 'overflow' issue. A BINARY_INTEGER (PLS_INTEGER) has a very large range of values:
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/datatypes.htm#i10726
>
The PLS_INTEGER data type stores signed integers in the range -2,147,483,648 through 2,147,483,647, represented in 32 bits.
>
If you are trying to create a collection of more than 2 BILLION of anything you have a serious problem with either WHAT you are trying to do or HOW you are trying to do it. Your 'overflow' issue is more likely a symptom that you are really running out of memory. You should ALWAYS have a LIMIT clause when you do BULK COLLECT statements.
Also see this section in that doc: SIMPLE_INTEGER Subtype of PLS_INTEGER
You need to address your LIMIT issue first and then address any other issues that arise from actually executing the code.
Then see the section 'SELECT INTO Statement with BULK COLLECT Clause' in that doc
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/tuning.htm#BABEIACI
That section has an example that shows you do NOT need to use an INDEX BY clause to create collections as you are trying to do. So your not 'getting any data in for loop' is NOT related to the lack of that clause.
That example also shows you that you do NOT use 'extends' when doing BULK COLLECT. The bulk collection automatically extends the collection as needed to hold the entire results (assuming you don't run out of memory for 2 BILLION things).
Example 12-22 in that same doc shows the proper way to use a double loop and a BULK COLLECT with a LIMIT clause
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/tuning.htm#BABCCJCB
Here is very simple sample code you can use in the SCOTT schema to understand how the double loop and LIMIT clauses work together.
>
The FETCH does a BULK COLLECT of all data into 'v'. It will either get all the data or none if there isn't any.
The LOOP construct would be used when you have a LIMIT clause so that Oracle would 'loop' back to
get the next set of records. Run this example in the SCOTT schema and you will see how the LIMIT clause works.
I have 14 records in my EMP table.
DECLARE
CURSOR c1 IS (SELECT * FROM emp);
TYPE typ_tbl IS TABLE OF c1%rowtype;
v typ_tbl;
BEGIN
OPEN c1;
LOOP --Loop added
FETCH c1 BULK COLLECT INTO v LIMIT 3; -- process 3 records at a time
-- process the first 3 max records
DBMS_OUTPUT.PUT_LINE('Processing ' || v.COUNT || ' records.');
FOR i IN v.first..v.last LOOP
DBMS_OUTPUT.PUT_LINE(v(i).empno);
END LOOP;
EXIT WHEN c1%NOTFOUND;
END LOOP;
DBMS_OUTPUT.PUT_LINE('All done');
END;
In the FOR loop you would do any processing of the nested table you want to do
and could use a FORALL to do an INSERT into another table.
>
I strongly suggest that you modify your code to work with a VERY SMALL set of data until it works properly. Then expand it to work with all of the data needed, preferably by using an appropriate LIMIT clause of no more than 1000. -
Serious Problem In Oracle9i regarding numerical value error.
Dear Experts,
The below code gives numerical value error where cursor is fetching data(in the 'for' line).
But the cursor's query is executing properly in a SQL window.
Version is Oracle9i Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
Database Server created in Windows platform.
Code------
CREATE OR REPLACE Procedure INTGD.Ge_b_p_Test_Decode As
Cursor c_Decode Is
select decode(txt_party_sex,'M','MALE','FEMALE') Txt_Refund_Type
from ge_b_motor_pool_policy_details
Union
Select 'P' From Gen_Proposal;
lv_refund_type varchar2(10);
l_Error_Msg Varchar2(500);
Begin
For i In c_Decode Loop
Begin
lv_refund_type := i.Txt_Refund_Type;
Insert Into Ge_b_Test_Decode Values (lv_refund_type);
Commit;
Exception
When Others Then
l_Error_Msg := Substr(Sqlerrm, 1, 500);
Dbms_Output.Put_Line(l_Error_Msg);
End;
End Loop;
End;
Please help ASAP.
Regards,
jishnuDear Experts
CREATE TABLE GE_B_MOTOR_POOL_POLICY_DETAILS
TXT_RO_CODE VARCHAR2(10 BYTE) NOT NULL,
TXT_OO_CODE VARCHAR2(10 BYTE) NOT NULL,
NUM_POLICY_NUMBER NUMBER(25),
NUM_ENDORSEMENT_SRL_NO NUMBER(3),
NUM_SCHEDULE_CERTIFICATE_NO NUMBER(5),
TXT_ENDORSMENT_POLICY_NUMBER VARCHAR2(23 BYTE),
NUM_REFERENCE_NUMBER NUMBER(14) NOT NULL,
DAT_REFERENCE_DATE DATE NOT NULL,
NUM_XML_JOB_NO NUMBER(20),
TXT_PRE_CAL_BASIS VARCHAR2(20 BYTE),
CUR_NET_TP_PREMIUM NUMBER(20),
CUR_TOT_TP_PREMIUM NUMBER(20),
CUR_TP_SERVICE_TAX NUMBER(20),
DAT_POLICY_EXPIRE_DATE DATE,
NUM_POL_TERM NUMBER(3),
TXT_POL_TERM_UNIT CHAR(1 BYTE),
TXT_PARTY_TYPE CHAR(1 BYTE),
TXT_PARTY_CODE VARCHAR2(30 BYTE),
TXT_PARTY_FIRSTNAME VARCHAR2(60 BYTE),
TXT_PARTY_MIDDLENAME VARCHAR2(60 BYTE),
TXT_PARTY_LASTNAME VARCHAR2(60 BYTE),
TXT_PARTY_SEX CHAR(1 BYTE),
DAT_POLICY_START_DATE DATE,
TXT_PARTY_ADDR1 VARCHAR2(100 BYTE),
TXT_PARTY_ADDR2 VARCHAR2(100 BYTE),
TXT_PARTY_ADDR3 VARCHAR2(100 BYTE),
NUM_PARTY_PINCODE NUMBER(6),
TXT_PARTY_STAKE_CODE VARCHAR2(10 BYTE),
CUR_PAYMENT NUMBER(10),
TXT_POL_INDICATOR VARCHAR2(10 BYTE),
TXT_MAIN_POL_TYPE VARCHAR2(10 BYTE),
TXT_POLICY_CATEGORY_FLEET_SCHD CHAR(1 BYTE),
DAT_VOUCHAR_DATE DATE,
TXT_PAY_MODE VARCHAR2(10 BYTE),
TXT_PARTY_NAME VARCHAR2(60 BYTE),
CUR_VOUCHAR_AMOUNT NUMBER(20),
TXT_VOUCHAR_NUMBER VARCHAR2(30 BYTE),
TXT_INSTRUMENT_NUMBER VARCHAR2(20 BYTE),
DAT_INSTRUMENT_DATE DATE,
TXT_NARRATION VARCHAR2(100 BYTE),
DAT_INTIMATION_DATE DATE,
DAT_INCEPTION_DATE DATE,
TXT_PRODUCT_CODE VARCHAR2(10 BYTE),
TXT_POLICY_EVENT VARCHAR2(10 BYTE),
TXT_NIL_ENDORSEMENT_INDICATOR CHAR(1 BYTE),
TXT_ENDORSEMENT_TYPE VARCHAR2(23 BYTE),
TXT_REFUND_TYPE VARCHAR2(23 BYTE),
TXT_CANCELLATION_TYPE VARCHAR2(23 BYTE),
TXT_MEMBER_CODE VARCHAR2(10 BYTE),
TXT_EVENT_SEQ_NO VARCHAR2(10 BYTE),
TXT_MEMBER_POLICY_NO VARCHAR2(42 BYTE),
DAT_VEHICLE_PURCHASE DATE,
TXT_VEHICLE_NEW_SECOND_HAND VARCHAR2(10 BYTE),
TXT_VEHICLE_CATEGORY VARCHAR2(10 BYTE),
TXT_VEHI_COMMERCIAL_PASSENGER VARCHAR2(10 BYTE),
TXT_VEHI_REGISTRATION_NO_1 VARCHAR2(3 BYTE),
TXT_VEHI_REGISTRATION_NO_2 VARCHAR2(3 BYTE),
TXT_VEHI_REGISTRATION_NO_3 VARCHAR2(3 BYTE),
TXT_VEHI_REGISTRATION_NO_4 VARCHAR2(4 BYTE),
TXT_REGISTRATION_NO VARCHAR2(15 BYTE),
DAT_VEHI_REGISTRATION_DATE DATE,
TXT_VEHI_REG_AUTHORITY VARCHAR2(30 BYTE),
NUM_VEHI_MANU_YEAR NUMBER(10),
TXT_VEHI_ENGINE_NO VARCHAR2(30 BYTE),
TXT_VEHI_CHASSIS_NO VARCHAR2(30 BYTE),
TXT_MAKE_MODEL VARCHAR2(10 BYTE),
NUM_GROSS_VEHICLE_WT NUMBER(15),
NUM_SEATING_CAPACITY_CABIN NUMBER(3),
TXT_VEHI_FULE_TYPE VARCHAR2(10 BYTE),
TXT_LPG_CNG_KIT_IN_BUILT VARCHAR2(3 BYTE),
TXT_TYPE_OF_PERMIT VARCHAR2(10 BYTE),
TXT_VEHI_USED_TUTION VARCHAR2(3 BYTE),
TXT_VEHI_USED_COMMERCIAL VARCHAR2(3 BYTE),
TXT_VEHI_DESIGNED_HANDICAPED VARCHAR2(3 BYTE),
TXT_EXTN_OF_GEO_REQUIRED VARCHAR2(3 BYTE),
NUM_CUBIC_CAPACITY NUMBER(5),
NUM_LICENSE_CARRYING_CAPACITY NUMBER(8),
TXT_NO_TRLR_TOWED_BY_TOW_VEH VARCHAR2(10 BYTE),
TXT_TRAILERS_TOWED_BY VARCHAR2(10 BYTE),
CUR_POL_RISK_PREMIUM NUMBER(20),
CUR_POL_RISK_DISCOUNT NUMBER(20),
CUR_POL_RISK_OVERLOAD NUMBER(20),
CUR_TOT_POL_RISK NUMBER(20),
TXT_WISH_TO_REDUCE_TPPD_COVER VARCHAR2(3 BYTE),
NUM_NO_NON_FARE_PAY_PASSENGER NUMBER(3),
NUM_NO_NON_FARE_PASS_EXCL_EMP NUMBER(3),
TXT_WISH_TO_COVER_EMP_NON_FARE VARCHAR2(3 BYTE),
NUM_NO_OF_LL_TO_DRVR_CLNR_CON NUMBER(3),
NUM_NO_OF_WCL_TO_COOLIES NUMBER(3),
NUM_NO_OF_PAID_DRVR_CLNR_COND NUMBER(3),
CUR_TOT_SI_FOR_DRVR_CLNR_CON NUMBER(15),
NUM_NO_UNNAMED_PERSNS_PRSNLACC NUMBER(3),
CUR_TOT_SI_FOR_UNNAMED_PERSNS NUMBER(15),
TXT_TYPE_OF_GOODS_TRANSPORTING VARCHAR2(10 BYTE),
TXT_HOLD_VALID_DRV_LICENSE VARCHAR2(10 BYTE),
NUM_PROPOSAL_TYPE NUMBER(5),
NUM_MEMBER_ENDORSEMENT_TYPE NUMBER(5),
NUM_VEHICLE_INTL_TYPE NUMBER(5),
NUM_MEMBER_MAKE_CODE NUMBER(5),
NUM_MEMBER_PAYMENT_MODE NUMBER(5),
NUM_MEMBER_POLICY_CODE NUMBER(3),
NUM_XID NUMBER(10),
TXT_MULTI_PAYMENT CHAR(1 BYTE),
TXT_POLICY_FLAG CHAR(1 BYTE),
NUM_RECORD_SEQUENCE NUMBER(30),
NUM_SCHEDULE_NUMBER NUMBER(5),
NUM_SCHEDULE_ENTRY_NUMBER NUMBER(10),
DAT_EVENT_DATE DATE,
NUM_OUT_XID NUMBER(10),
DAT_PROCESS_RUN_DATE DATE,
TXT_HIRE_IMT35_APPLICABLE VARCHAR2(3 BYTE),
DAT_ENDT_START_DATE DATE,
TXT_OTHER_MAKE VARCHAR2(50 BYTE),
TXT_TRANSIT_FROM VARCHAR2(30 BYTE),
TXT_TRANSIT_TO VARCHAR2(30 BYTE),
NUM_ACTUAL_DISTANCE NUMBER(15),
TXT_TRAILER_ATTACHED VARCHAR2(1 BYTE),
NUM_NO_TRAILER_ATTAH_TOWING_BY NUMBER(10),
TXT_TRAILER_PURPOSE_TOWED_BY VARCHAR2(3 BYTE),
TYPE_OF_OTHER_VEHI_MISC VARCHAR2(10 BYTE),
NUM_NUMBER_OF_DRIVERS NUMBER(3),
NUM_NUMBER_OF_TRADE_CERTIFI VARCHAR2(3 BYTE),
TXT_WHETHER_TWO_WHEELER_OR_NOT VARCHAR2(3 BYTE),
CUR_WAGES_IN_RS NUMBER(15),
NUM_AREA_IN_SQUARE_METER NUMBER(15),
TXT_TYPE_OF_PREMISES VARCHAR2(3 BYTE),
NUM_AREA_OPENAIRCARPARK_IMT64 NUMBER(15),
NUM_NO_PREMISES_BEYOND_450 NUMBER(3),
TXT_LIABILITYWORKAWAYIMT65 VARCHAR2(3 BYTE),
NUM_NO_LLPASSEXCLUDEMP_IMT46 NUMBER(3),
TXT_WHETHER_VEHIUSEDDEMOIMT60 VARCHAR2(3 BYTE),
TXT_WHETHERVEHICLETUITIONIMT61 VARCHAR2(3 BYTE),
NUM_NO_LLDRIVERCLNRCONDUCIMT28 NUMBER(3),
NUM_MISC_VEHICLECLASS_MEMBER NUMBER(10),
TXT_PA_OD_COVER_REQUIRED VARCHAR2(1 BYTE),
NUM_DISTANCE_TRAVELLED_VEHICLE NUMBER(10),
NUM_NO_OF_DAYS NUMBER(10),
CUR_TP_LOADING NUMBER(20),
TXT_DUMMY_1 VARCHAR2(100 BYTE),
TXT_DUMMY_2 VARCHAR2(100 BYTE),
TXT_DUMMY_3 VARCHAR2(100 BYTE),
TXT_DUMMY_4 VARCHAR2(100 BYTE),
TXT_DUMMY_5 VARCHAR2(100 BYTE),
NUM_DUMMY_1 NUMBER(2),
NUM_DUMMY_2 NUMBER(2),
NUM_DUMMY_3 NUMBER(3),
NUM_DUMMY_4 NUMBER(4),
DAT_DUMMY_1 DATE,
DAT_DUMMY_2 DATE,
DAT_DUMMY_3 DATE,
DAT_DUMMY_4 DATE
here txt_party_sex char(1) column is used in the pl/sql program
CREATE TABLE GEN_PROPOSAL
NUM_REFERENCE_NUMBER NUMBER(14) NOT NULL,
DAT_REFERENCE_DATE DATE NOT NULL,
NUM_POLICY_NUMBER NUMBER(20) DEFAULT 0 NOT NULL,
NUM_POLICY_YEAR NUMBER(4) DEFAULT 0 NOT NULL,
NUM_DEPARTMENT_CODE NUMBER(3) NOT NULL,
NUM_POLICY_TYPE NUMBER(3) NOT NULL,
NUM_ENDORSEMENT_NUMBER NUMBER(20) DEFAULT 0 NOT NULL,
NUM_ENDORSEMENT_YEAR NUMBER(4) DEFAULT 0 NOT NULL,
NUM_PROPOSAL_TYPE NUMBER(2) NOT NULL,
TXT_PROPOSAL_STATUS VARCHAR2(2 BYTE) NOT NULL,
NUM_COVERNOTE_NUMBER NUMBER(16),
DAT_COVERNOTE_DATE DATE,
TXT_NAME_OF_INSURED VARCHAR2(200 BYTE) NOT NULL,
MEM_ADDRESS_OF_INSURED VARCHAR2(255 BYTE) NOT NULL,
TXT_TELEPHONE VARCHAR2(30 BYTE),
TXT_FAX VARCHAR2(15 BYTE),
NUM_BUSINESS_CODE NUMBER(2),
NUM_INDUSTRY_CODE NUMBER(4),
NUM_PREVIOUS_POLICY_YEAR NUMBER(4),
NUM_PREVIOUS_POLICY_NUMBER NUMBER(20),
NUM_PREVIOUS_OFFICE_CODE NUMBER(6),
NUM_PREVIOUS_POLICY_TYPE NUMBER(3),
CUR_TOTAL_PREMIUM NUMBER(13,2) NOT NULL,
CUR_PREMIUM_RECEIVED NUMBER(13,2) DEFAULT 0 NOT NULL,
NUM_DEVELOPMENT_OFFICER_CODE NUMBER(8),
NUM_AGENT_CODE NUMBER(14),
NUM_SPECIAL_CLIENT_CODE NUMBER(8),
DAT_DATE_OF_ISSUE_OF_POLICY DATE,
DAT_DATE_OF_EXPIRY_OF_POLICY DATE,
DAT_PREV_POLICY_EXPIRY_DATE DATE,
TXT_OCCUPATION VARCHAR2(50 BYTE),
NUM_NO_OF_CLAIMS NUMBER(8) DEFAULT 0 NOT NULL,
NUM_ENDORSEMENT_TYPE NUMBER(2),
DAT_HOURS_EFFECTIVE_FROM DATE,
CUR_PREMIUM_COMPUTED NUMBER(13,2) NOT NULL,
CUR_SERVICE_TAX NUMBER(13,2) DEFAULT 0 NOT NULL,
CUR_ENDT_AMOUNT NUMBER(13,2) DEFAULT 0 NOT NULL,
CUR_ENDT_SERTAX NUMBER(13,2) DEFAULT 0 NOT NULL,
CUR_STAMP_DUTY NUMBER(11,2) DEFAULT 0 NOT NULL,
YN_STAMP_DUTY_CHARGEABLE NUMBER(1) NOT NULL,
CUR_SUM_INSURED NUMBER(16) NOT NULL,
NUM_OWN_SHARE NUMBER(5,2) NOT NULL,
NUM_AGENT_BILL_NO NUMBER(12) DEFAULT 0 NOT NULL,
NUM_AGENT_COMM NUMBER(13,2) DEFAULT 0 NOT NULL,
DAT_ENDT_START_DATE DATE,
DAT_ENDT_END_DATE DATE,
TXT_USER_ID VARCHAR2(8 BYTE),
NUM_PC_ID NUMBER(2),
NUM_SESSIO_ID NUMBER(5),
NUM_PIN_CODE NUMBER(6),
CUR_SPECIAL_DISCOUNT NUMBER(13,2),
DAT_PROPOSAL_DATE DATE DEFAULT trunc(sysdate),
CUR_ENDT_STAMP_DUTY NUMBER(11,2) DEFAULT 0 NOT NULL,
NUM_ENDT_POLICY_NUMBER NUMBER(20) DEFAULT 0 NOT NULL,
TXT_ENDT_FLAG CHAR(1 BYTE),
NUM_INSTMNT_NO NUMBER(2) DEFAULT 0 NOT NULL,
NUM_PREVIOUS_COMPANY_CODE NUMBER(6),
NUM_COUNTRY_CODE NUMBER(3) NOT NULL,
NUM_CURRENCY_CODE NUMBER(3) NOT NULL,
NUM_AGENT_COMM_RATE NUMBER(4,2),
NUM_SPECIAL_DISCOUNT_RATE NUMBER(4,2),
DAT_COVERNOTE_RCVD_DATE DATE,
TXT_SECTOR_CODE VARCHAR2(5 BYTE) NOT NULL,
NUM_CLASS_CODE NUMBER(3) NOT NULL,
TXT_MANUAL_CODE VARCHAR2(3 BYTE) NOT NULL,
TXT_CUST_POLICY_NO VARCHAR2(20 BYTE) NOT NULL,
TXT_CUST_ENDT_POLICY_NO VARCHAR2(20 BYTE) NOT NULL,
DAT_LAST_UPDT_DTTM_DATE DATE DEFAULT sysdate NOT NULL,
TXT_ARCHIVAL_STATUS CHAR(1 BYTE) DEFAULT 'F' NOT NULL,
NUM_RENEWAL_POLICY_NO NUMBER(20) DEFAULT 0 NOT NULL,
TXT_LAST_RECORD_STATUS CHAR(2 BYTE) NOT NULL,
TXT_EMAIL_ADDRESS VARCHAR2(200 BYTE),
NUM_SUB_CLASS_CODE NUMBER(3),
CUR_STAFF_DISCOUNT NUMBER(13,2),
CUR_GROUP_DISCOUNT NUMBER(13,2),
CUR_LONGTERM_DISCOUNT NUMBER(13,2),
CUR_TERRORISM_LOADING NUMBER(13,2),
NUM_REINSTATEMENT_CLAIM_NO NUMBER(20),
NUM_AGENT_MOD_COMM_RATE NUMBER(4,2),
TXT_BUSINESS_FLAG VARCHAR2(3 BYTE),
YN_SEZ NUMBER(1),
TXT_PAN_NO VARCHAR2(15 BYTE),
TXT_COMM_SHARE VARCHAR2(2 BYTE),
TXT_CROSS_REFERENCE_NUMBER VARCHAR2(200 BYTE),
DAT_CROSS_REFERENCE_DATE DATE,
NUM_GROUP_CODE NUMBER(8),
TXT_PRODUCT_TYPE VARCHAR2(2 BYTE),
DAT_ACTUAL_EXPIRY_OF_POLICY DATE
) -
Hi ,
We have following code and sending the data through attachnmet its giving the pl/sql numeric value error.
Please correct me.
__Code Details:::__
CREATE OR REPLACE PROCEDURE APPS.print_reports
IS
wfile_handle UTL_FILE.file_type;
lv_file VARCHAR2 (100);
lv_date VARCHAR2 (20);
mail_conn UTL_SMTP.connection;
lv_rep_headers VARCHAR2 (32000);
p_o_srv_result xxcss_prf_report_pkg.ref_cur_srv_prog;
lv_str_type XXCSS_PRF_STRING;
lv_line VARCHAR2 (32767);
lv_send_to VARCHAR2 (200);
lv_host_name VARCHAR2 (200) := 'outbound.cisco.com';
l_vtab CHAR := CHR (9);
lv_from VARCHAR2 (200) := '[email protected]';
lv_att_file_name VARCHAR2 (200);
lv_path VARCHAR2 (200);
p_request_type VARCHAR2 (1) := 'E';
p_request_id NUMBER;
errbuf VARCHAR2 (2000);
retcode NUMBER;
crlf VARCHAR2 (2) := CHR (13) || CHR (10);
lv_line_data Clob;
lv_clob clob;
BEGIN
BEGIN
SELECT VALUE
INTO lv_path
FROM v$parameter
WHERE NAME = 'utl_file_dir';
EXCEPTION
WHEN OTHERS
THEN
lv_path := '\tmp';
END;
lv_rep_headers :=
'REGION'
|| CHR (9)
|| 'COUNTRY'
|| CHR (9)
|| 'CUSTOMER NAME'
|| CHR (9)
|| 'ERP CUSTOMER NUMBER'
|| CHR (9)
|| 'PROFILE ID'
|| CHR (9);
FOR i IN ( SELECT DISTINCT srv_program_id srv_prgm
FROM xxcss_prf_cust_srv_programs
ORDER BY srv_program_id ASC)
LOOP
lv_rep_headers := lv_rep_headers ||i.srv_prgm || CHR (9);
END LOOP;
lv_rep_headers := lv_rep_headers || CHR (13);
BEGIN
XXCSS_PRF_REPORT_PKG.offline_daemon (p_request_id,
p_request_type,
p_o_srv_result,
errbuf,
retcode);
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE ('Error in Offline');
END;
lv_att_file_name := 'Eligibility_reports'||p_request_id||'.xls';
-- DBMS_OUTPUT.PUT_LINE (lv_rep_headers);
wfile_handle := UTL_FILE.fopen (lv_path, lv_att_file_name, 'W');
UTL_FILE.put_line (wfile_handle, lv_rep_headers);
BEGIN
LOOP
FETCH p_o_srv_result INTO lv_str_type;
EXIT WHEN p_o_srv_result%NOTFOUND;
lv_line := NULL;
FOR i IN 1 .. lv_str_type.COUNT
LOOP
lv_line := lv_line || lv_str_type (i) || CHR (9);
END LOOP;
lv_line := lv_line || CHR (13);
UTL_FILE.put_line (wfile_handle, lv_line);
END LOOP;
lv_str_type.DELETE;
END;
UTL_FILE.fclose (wfile_handle);
BEGIN
wfile_handle := UTL_FILE.FOPEN (lv_path, lv_att_file_name, 'R');
-- DBMS_OUTPUT.PUT_LINE ('inside file');
LOOP
UTL_FILE.GET_LINE (wfile_handle, lv_line_data,32767);
-- DBMS_OUTPUT.PUT_LINE (lv_line_data);
lv_clob := lv_clob || lv_line_data;
END LOOP;
UTL_FILE.FCLOSE (wfile_handle);
EXCEPTION
WHEN OTHERS
THEN
errbuf := sqlerrm;
UTL_FILE.FCLOSE (wfile_handle); -- close file
DBMS_OUTPUT.PUT_LINE ('Exception'||errbuf);
NULL;
END;
DBMS_OUTPUT.PUT_LINE ('afterdata');
--DBMS_OUTPUT.PUT_LINE (lv_line_data);
SELECT email_id
INTO lv_send_to
FROM xxcss_prf_offline_report_tb
WHERE request_id = p_request_id AND report_type = p_request_type;
mail_conn := UTL_SMTP.open_connection (lv_host_name, 25);
UTL_SMTP.Helo (mail_conn, lv_host_name);
UTL_SMTP.Mail (mail_conn, 'sangrdas');
UTL_SMTP.Rcpt (mail_conn, lv_send_to);
UTL_SMTP.OPEN_Data(mail_conn) ;
DBMS_OUTPUT.PUT_LINE ('Sending Data');
UTL_SMTP.write_Data (
Mail_Conn,
'Date: '
|| TO_CHAR (SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss')
|| crlf
|| 'From: '
|| lv_from
|| crlf
|| 'Subject: ELIGIILITY Report_'
|| p_request_id
|| crlf
|| 'To: '
|| lv_send_to
|| crlf
|| 'MIME-Version: 1.0'
|| crlf
|| -- Use MIME mail standard
'Content-Type: multipart/mixed;'
|| crlf
|| ' boundary="-----SECBOUND"'
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type: text/plain;'
|| crlf
|| 'Content-Transfer_Encoding: 7bit'
|| crlf
|| 'some message text'
|| crlf
|| -- Message body
'more message text'
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type: text/plain;'
|| crlf
|| ' name="'|| lv_att_file_name||'"'
|| crlf
|| 'Content-Transfer_Encoding: 8bit'
|| crlf
|| 'Content-Disposition: attachment;'
|| crlf
|| ' filename="'
|| lv_att_file_name
|| '"'
||crlf
||crlf
||lv_clob
|| crlf
||crlf
||crlf
|| '-------SECBOUND');
UTL_SMTP.CLOSE_Data(mail_conn) ;
UTL_SMTP.quit (mail_conn);
DBMS_OUTPUT.PUT_LINE ('After Mail');
EXCEPTION
WHEN OTHERS THEN
errbuf := sqlerrm;
DBMS_OUTPUT.PUT_LINE ('ERROR Sending Data'||errbuf);
ROLLBACK;
END;
/Yet again, opening a new thread for an existing issue...
Need help in UTL file
Same old, same old...
need a report code
need to create the header dynamically for a report
Would have thought you'd get the idea of posting on the forums by now. -
CS5: Type tool entering text in a tiny transform box
Everything else seems to be working correctly (at least those parts I use).
At some point, several months ago, my sister and I were playing with transform (by phone, we are in different states) -- she had taken a Photoshop class and wanted to try to duplicate something.
I tried using my type tool yesterday, and couldn't see anything when I typed. (White background, black text, Arial, 14 pt, 100%)
I've tried clearing type presets.
I finally tried blowing it up to 500% and saw a small, gray font-like image where I was typing.
I held down Ctrl and played with the transform box: if I expanded the box, my text is there.
I've tried clicking on everything at the top when in transform, but have no idea what I'm doing.
I have no idea how to get my type tool entering text in the regular way.
Please help.
Thanks!The resolution of the file I was working on was 2 (I obviously didn't add or deleted the '7' that was supposed to be in front of it)!
Thank you ever so much, CB! I spent a couple hours on this and really appreciate your help and insight. -
How can I clear unwanted transformation boxes?
In the last 24 hours free transform boxes have become fixed - I can't apply transformations.
In addition, free transform boxes appear when they are not wanted.
Here is an example: if I make a simple rectangular selection then copy and paste it into a new layer, as soon as I click on the pasted area I get an unwanted transform box which I can't get rid of. It disappears whilst I am in a different layer but reappears on returning to the problem layer.
Restarting makes no difference and the problem is present all the time with the simplest of images or just new plain shapes.
I have made no changes to PS and added no new plugins, just carried out normal PS work over this period.
To begin with I found once or twice that I could trick PS into applying the problem ransformation by clicking in the layer with the Text cursor but this trick soon failed. Now if I select the text tool I get the query box: "Apply the transformation?" Clicking "Apply" makes the transformation box disappear but it reappears again immediately the layer in question is clicked.
I have CS5 12.1 x 64 , Windows 7 on a Dell XPS8300 with 8 GB of RAM
Help please.With the Move Tool selected do you have Show Transform Controls checked?
-
I had moved some folder to trash from my segate external hard disk.But i am unable to empty my trash box ,getting an error:The Finder can’t complete the operation because some data in “” can’t be read or written. (Error code -36): pls advise,how to trash
Hi, what format is the external drive?
Well, in pure Apple File System talk... -36
ioErr
I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
The other -36 is a Windows/SMB issue.
Solving Trash Problems...
http://thexlab.com/faqs/trash.html -
Photoshop v14.01.2 - PCx64 - Transform Box Inverted
Hello adobers, and photoshopers.
Here my question.
A PC running adobe photoshop CC (updated t v14.01.2 next friday) is challenging me with this little 'bug' :
After a first transformation, if I want to transform again an element (in this case, a logo in a dynamic object), the transform box is inverted : if I move the right down corner, the transformation apply to the Up left corner). doesn't know if it's something happening for other users, and a bug concerning this version of photoshop CC or if it's an updating problem only on my computer.
thx for helping.
AntoineThank you for your answer.
It's a smart object, yes (tested with vector object or simply image object, and without being a smart object just a pixel element).
This bug happens when right cliking for a transform, or by choosing a transformation in the menu, and only if the object has already been transformed one time. it's a second transformation that makes the bug happening.
Holding a modifier key or not, doesn't make it happening more often or less.
by the way, working from a new file has made this bug disappear. the original file must have been corrupted, but i don't know how.
thank you
Antoine
Maybe you are looking for
-
How to use airplay with pandora on macbook
I'm trying to use airplay to play a browser based player over airplay speakers. I can do this with my iPhone but i can't figure out how to do it on Macbook. Please help
-
Image instead of List Name, and hyperlink the image to view 'All Items.aspx' page
Hi, I would like remove the Page title for list (i.e., name of the list in view all items.aspx page) , and instead use image and hyperlink the image to 'All items.aspx" page. Using developer tool found the element (#PageTitle) and added 'Script Edito
-
Viewing PR CS6 sequence on NTSC monitor?
Hi, anyone know how I can view my PR CS6 sequence on my NTSC HD monitor? Thanks!!
-
PIM does not connect to ACD (Does not active - stays idle)
Situation: PIM does not activate. Center took a power hit - PG took a hit and had mother board replaced. After that the PIM attempts to connect but is continuously disconnedted: SPECS: PG (ver 6.0) running on a windows 2000 box CRT cab
-
Selling Logic Pro 9 (box) to a new user
I am selling my Logic Pro 9 boxed as I ve bought logic x. How does the new buyer register? Do I have to unregister my software?