Transformation dont show changes after transport

Hi i have a BI 7.0 and i use transformations in my model, but when i transport the transformations it change of IDs .
I`ve read that it is normal and when a transformation is transporte to BIQ or BIP it changes its ID....its technical name is not the same in BID and in BIP.
First question is ...i need to know if its possible to set in BI that the IDs must be the same in all systems or that cant be changed?
Second...i transport my transformation and i get no errors in transport but i cant see the last changes in BIP, the first time it transport well but after that the changes are not reflected, changed IDs could be the origin of the problem? or its a bug o system?
I hope somebody could help me.
Regards

Hi Oscar,
are you sure the update rule/transformation is transported from dev to prd?
I'm thinking someone changed/created it directly in PRD.
As far as I know, the technical ID of an update rule/transformation gets transported too. So they should be the same across systems.
Where did you read it's normal they're different?

Similar Messages

IWeb NOT showing changes after publishing

I had 2 sites I created with iweb. I made some changes on one, but not only did it not show any changes after I published it but said there was an error. I could access the site when I entered my basic domain name, but not through iweb. I deleted BOTH sites and started from scratch. Saved my work and tried publishing at least 5 different times. It STILL shows my DELETED sites (which I can't even see on my computer because I DELETED THEM!). MobileMe account is current. Domain name current.
Anyone else having these issues? ANy idea what to do?
Thanks

But did you delete your site folder from MobileMe too? It's all very well deleting your site from iWeb, but if you really want to delete it and start again, you also need to delete your site folder and index file from MobileMe. Log into MobileMe and then go to your iDisk and delete the files from there too and then re-publish from iWeb and your new pages should show.

Changes after transport are not reflecting in QA and Production

Hi All,
We changed two table settings in developemnt system table names are ALMBCADM & ALMBCDATA.
We modified the table technical settings as "buffering allowed but de-activated". After we transported the change requested in QA Prod enviornment ,the changes are not getting reflected in the systems. Technical settings in both the systems are still showing as "Buffering is switched off". What could could be the reason behind this???????
Regards,
Prashant

Hi Ashok,
I have checked the CR from SE01 from objects tab , and found these entries-:
Program ID          Object Type             Object Name
LIMU                               TABT              ALMBCADM
LIMU                               TABT              ALMBCDATA
Which I suppose is correct.
Please advise.
Regards,
Prashant

IDOC Sender Partner has changed after transporting Integration Directory ob

Greetings,
After we did a transport from QA to PR for a new interface (Intergration Directory) objects were transported,
The sender partner has changed to QA in all outbound IDOCs generated in XI PR.
I checked the adapter-specific identifiers and it is showing as production.
Any hint where I should check?

Found it in the filesystem communication channel as QA and changed it to PR

Page not showing changes after refreshing

For some reason after I made a few changes to my index page and uploaded with Dreamweaver MX, the changes won't show up in my browser(s). I don't think I did anything different, and I made changes on it just a few minutes ago. It's maddening to not be able to figure out something so simple.
Can someone assist?

Hi,
pardon, but have you really done all these things, so that your browser is "convinced" to show your modification?
- refresch browser
- If set, delete the bookmark to the page or re-create the bookmark.
- Quit browser
- Empty the Temp Internet Files Internet Options
- Clear History
- Delete everything in general, where the browser remembers visited sites.
- Restart
- Clear Site visit
- Clear Bookmark
- Use another browser in order to test
Hans-G.

BI 7 real-time cube load behavior changed after transport

Dears,
After I transported real-time cube from DEV to QA system, I found that all the real-time cube load behavior changed from 'can be loaded, planning not allowed' to 'can be planned, load not allowed'. What happened? Or I'm enpackaging this type cube with wrong step? Any suggestions are appreciated.
Best regards,
Gerald

Hi,
I think note 984803 can be usefull for you.
The link is https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=984803&_NLANG=E
Rgs
Antonino

Real-Time i-Cube load behavior changed after transport

Dears
After the transports compleleted, the Real-Time i-cube load behavior is changed. All the 'can be loaded,planning not allowed' were changed to 'can be planned, load not allowed'. What happened? How I enpackage this type R-T i-cube? Any suggestions are appreciated.
Best regards,
Gerald

Hi Gerald,
you can switch it back to the enable loadind of data, using the "Switch Transactional Infocube" option you get when you right click on the Infocube.

My buttons dont show up after I have exported to interactive pdf!!!!! HELP

Hi there,
I am using cs5.5 indesign. I am creating an interactive document with simple buttons to move from page to page.
They work fine in preview modes, but as soon as I export to pdf, they become invisible.
Let me give you an example:
1. I either create my own shape or use one of the sample buttons provided.
2. I place text over the button along the lines of (click here to proceed)
3. I convert to a button (if needs) sometimes i use sample buttons so that doesnt need
4. I add a function (+ to next page)
5. I set a rolloover state and normal state
6. I preview it, it works fine
7. I export to interactive pdf.
8. The button is invisible!!!!!!!!
Funnily enough, the additional text boxes that i sometimes place over the buttons are not invisible.......
This is frustrating the hell out of me, i cannot find anywhere online that explains this. I have watched hours of interactive button videos and am convinced I am not doing anything wrong that they have told me.
Please help if possible, I just want to have a simple next page button!!!!!!
Thanks so much

Hi there,
Still trying to fix this problem, does anybody have even a small hint please?
Everything seems fine, i convert to pdf and the buttons just vanish.....you can still click on the space where they were and it performs the function, just that the image or graphic that has been converted into the button is completely invisible.
I know it seems a small thing, but I can't send my presentations out without it.
Any help would be much appreciated, thankyou

Issue with migrated transformation rule after transport

Hello all,
We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment.
The issue is when we transport these transformation rules to QA, one of the fields of datapacket dimension "RECORD" becomes &R1& in the global structure of start routine and therefore, transport fails in QA. Along with this we had another issue that if we add any additional fields in the cube or ODS structure, the global structure in start routine doesn't change after transport in QA. Basically, it seems like it doesn't do anything when we do transport.
We tried couple of things by transporting entire flow inclding target and source objects, we also tried transporting only transformation with overwrite mode. But none of the things worked. We also have logged the message with SAP.
SAP suggested us to open the QA environment and perform the change manually. We did it and obviously we could activate the transformation rules. But when we tried to re-transport the transformation, it is keep failing with the error "Syntax Error". My assumption has after the transport, the field has become &R1& again.
Has anybody faced such issue? We are on Ehp1 SP7.
- Danny

Thanks Murali,
Yes as I mentioned SAP suggested us to open the box and do it manually, but once we are done with the manual changes, we tried transporting the same transformation rule again, which I guess going to be the case in case of any future enhancement. Transport failed and it says "Syntax Error".
The transformations we activated manually in the target system are active, but when we try to load the data, it throws the exception error.
Any clue ?? Is it working fine in your system after you did manual changes? Did all future transport go well ?
- Danny

Change of technical name after transport

I found some of the technical names of dtp's are changed after transport from development system to quality and not all dtps names are changed..
Is there any specific reason that some dtps technical names are changed after transport and some not changed?
And there are any more proceess type that change when they are transported ?
Thanks
vamsi

Hai thats correct techincal name of DTP's change after successful transport from dev - quality or any instance for that matter .Its quiet normal in BI 7 infact a bug which we too found intially .
Goodday.
Edited by: SapBuddy on Oct 7, 2008 7:19 PM

Test System (BQ1) Objects showing up wrong Source System after Transport.

Hi Experts,
We are working on IS-U BI7.0 Project. We have finished with our Development and have transported the DataSources, Transformations and DTPs from Development (BD1) into Test (BQ1) Systems.
We have entered values in the Conversion of Logical Source Systems correctly.
When we select the DataSource and Click Object Directory Entry from the Extras Menu, we found that the Original Source System is defined as BQ1 instead of BD1 (Development System), which is where the Object is getting Transported from.
We have implemented an SAP Note:1008633 (Incorrect Source System after Transport (RSTRAN 514) but couldn't resolve the issue.
We basically want all the Objects in the BQ1 (Test System) showing the Original Source System as BD1 (Development System) but only the DataSources and it's connected Transformations and DTPs are originating from the BQ1 (Test) System itself (The Transformations when Transported from BD1 to BQ1 are Transported with a different Technical Name which is very strange).
Had anyone faced similar problem and if so, what was the effective solution implemented.
Any help in this regard is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

It is resolved by our Basis.
Thanks,
Chandu

Changes in WAD are not reflecting after transport

Moving thread to Business explorer
Thank you
Edited by: YJV on Dec 22, 2009 2:09 PM

I just remembered a similar problem we had with reports. Changes weren't visible after transport, however, when we opened the report and saved it in the report designer, the changes were visible. It had something to do with authorisations, most users missed the authorisation to 'generate' the report which was needed after transport. Maybe you can try opening the template with a SAP_ALL user or something on production to see if it's related (or test again on QAS with a new template and a user with limited authorisations.
Kind regards,
Alex

After transport changes are not reflecting to other users

HI all it's urgent
One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
with regards
vinod

I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
Hope this helps,
Sanket

I updated song titles in itunes but the changes dont show up on my ipod

I updated song titles in itunes but the changes dont show up on my ipod. It still shows the old song titles. Help!!

Did you try unsyncing the songs and then resyncing them?

Changes in java file dont show up on site

hi
i'm using tomcat4 server.
i use java jsp html files for developing the website.any changes to jsp files show up on refreshing the page but when i do changes in java files (which are called from jsp files) compile them and refresh the page the changes dont show up.
even restarting the server didn't help.
when i delete the .class file of that java code still the server runs when it is called from jsp file.
it doesn't give filenotfound or classnotfound error which is expected in such case.
can anybody plz tell me what to do

Did you not overlook something, like putting a jar containing (previous versions of ) your classes to "lib" ?

Transformation dont show changes after transport

Similar Messages

Maybe you are looking for