Transformation - Fields Missing!!

Hello Experts,
I am facing a strange issue in the transformation beteen DSO to Cube.
My DSO Contains 148 fields while in the transformation I can see only 131 fields.
IN thedevelopment Box the transformation appears fine but in the Acceptace box the mentioned problem
occurs.I tried regenerating the export datasource, activated & transported the DSO but all in vain.
PLease help.
Thanks,
Suyog

Hi,
Go to RSA1--> Data sources Choose source system as BI and find for data source with 8<DSO name>. Once you get the data source ,select change from context menu --> go to Fields tab and check under column Transfer (5th Column) for all fields . If any field is unchecked then check and activate data source to see all fields in Cube transformations.
hope it helps...
regards,
Raju

Similar Messages

Transformation fields getting misplaced

I am using DSO --> 66 data fields, 2 key fields. When I create the transformation I get all the fields. But when I save the transformation I am loosing some fields from the transformation. What can be the error? When I look at the detail view, I see the corresponding target fields where the transformation is missing is mapped to unwanted fields (i.e. 1 transformation field mapped to n no. of target fields). I recreated the transformation but still getting the same error.
Please help me.

Hi,
My problem has been solved , i upgraded my SP level 17 to 19, By this i overcome that problem.
Be sure to upgrade SP level latest patch if and so
->if your transformation mapping to one to and many
-> Even though if you activate it will show inprocess
Otherwise 17 patch is enough.

Fields missing in Infoset.

I have an infoset that contains 3 master data objects. Some of the attribute fields do not show up in the infoset. Does anyone know why some fields show up and other do not?
Thank you
Aaron

Hi Oscar,
The field missing is not set to attribute only. I checked other fields that do show up in the infoset and they are not marked as attribute only. Any other ideas?
Thanks
Aaron

FIELDS MISSING

Hi,
When i replicated CO-PA data into BI. It created two DS's:
0COPA_RCTY AND 1_CO_PA_XXXXXXX
I created an Infosource and transfer rules for 1_CO_PA_XXXXXXX but there are a few fields missing that i do see in the operating concern such as:
ARTNR=0MATERIAL
KNDNR=0CUSTOMER
BZIRK=0SALES_DIST
Why are these fields not in the Infosource since they are in the operating concern?
Where would they be?
Thanks

Delete the data source and then need to re-create using KEB2 transaction. While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source.
(you can also try, goto KE24 and edit the dataaource and add your fields not 100% sure of it works)
how to select fields refer doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6

Fields missing on FB60

Hi,
I have a couple of questions.
1. I see there are a few fields missing on the line item level on FB60. It's not the case for development or testing environment. But in Production it's happening. Does anyone know how to get these fields back?
2. Is there a transaction where I can clear multiple documents at once instead of one like FBRA?
Thanks

Hi!
Field is missing in FB60 screen, please brief which field you are missing and whether its comes earlier, if so please check is there any variant create, u can see this variant at end of the line item screen in top position. when u put your cursor there it will show u the configuration, click there and see if any variant is used, if so remove that and put tick on use as standard setting and try.
FBRA is not for clearing the document, but it reset or reset and reverse the clear document.
for clearing of vendor tcode is f-44
for clearing of g/l tcode is f-03
for clearing of customer tcode is f-32
Rakesh

Fields Missing in datasource

Hi friends,
Please help, I have some fields missing in my data source , but they are available in the extract structure of that data source..what do I do now, to see the same fields in my data source also?? should I ahve to append the data source??
thanks alot in advance,

Hi
I think you didn't appended the fields to the append structure.
Try to append the fields in the append structure and save ands activate it. and again activate the extract structure.
then you can see in RSA6
Hope this helps
shiva

Crystal Report VS2005 - Table fields missing in Database Expert

Hi,
I am having a problem with the Crystal Report comes with Visual Studio 2005. I am trying to develop a customized report for SAP Business One. When I try to add two tables using the Database Expert, there are certain fields missing in the LINK page. This is a big problem for me because I need to link that field with another table. Oddly, it doesn't seems that there are anything wrongs with the missing fields. If I click OK and check at the Field Explorer, the missing fields are there!!!
In other words, it is missing only at the Database Expert --> Link Tab. Anyone having the same problem? Is this a known issue or any patch that I can apply to resolve this issue?
Thanks in advance for your help.
Regards,
Harianto

Try this link to resolve your issue:
Full Outer Join option for SQL Query and BW Query grayed out
Thank you
Don

Some fields missing from the Information interface

On iTunes 12 I can’t find the "Description" field that was in the Video page.
The field still shows in the list of songs, but it doesn’t appear on the new "Information" interface. And I don't think this is the only field missing compared to the previous Information interface. Can anyone help? Thank you.

... before you click Get Info.
tt2
YES!
Thank you turing! That really helped.
(it seems a bit of a complication to me, the system was just fine as it was, but what do I know?)

Issue for Production Price list field missing

Hello all,
I have a strange issue with a field missing in the issue for production window. When an issue for production is created, the Price list field is missing. Please see the attached screenshot. Does anyone know how to show this field? I have checked form settings and it's not an option there.

Hi Chris
Following is the SAP Note No: 1720071
Symptom
When opening "Issue for Production" from "Production Order", "Price List" field is missing.
Reproducing the issue
1. Login to SAP Business One.
2. Go to Production->Production Orders, open a "released" production order document.
3. Right-click a row whose "issue method" is "Manual", and choose "Issue Components". (If all the rows have "Backflush", you need to change one of them.)
4. "Price List" field is missing on the left top of the new screen.
5. If you click "Attachments" tab, the field will be showing correctly.
Solution
Current workaround is to click "Attachments" tab to make "Price List" showing.
The issue is planned to be fixed in SAP Business One 9.0.
With Regards
Balaji

Storage location field missing while doing GR with PO number

When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
I tried other way to receive goods , but storage location disappears when I save it.
MMBE shows stock as on order before reciept , after I post goods, material document created but stock disappears. Not even in the plant.
Can anyone help , please?

<i>The following from other message thread solved my problem....</i>
Stephen Birchall
Posts: 1,095
Questions: 1
Registered: 3/27/07
Forum points: 1,566
   Re: Material Classifications and Purchasing cycle
Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post
Hi,
You create the material in MM01 and select the non-valuated stock material type.
When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
Steve B

Keep appointments field missing!

hello
I am having trouble with my pearl and I need some help.
i realized that , during sync, the device deleted all entries prior to 60 days, which as you can imagine, affected outlook as well.
when i looked under calendar options so to adjust how long i want it to keep the entries, I realized that there is no such field in my hand held! No such option!
is there anyway to resolve this?
by the way I m using desktop manager 4.2.0.14 in case this information is needed...
can someone help please?
thank you in advance

Hi Shankar,
You may check the following points to know cause.
01. Get the message text by using message category and message number.
Message text would be "%1 field missing"
SQL> select message_text from ci_msg_l where message_nbr='253' and message_cat_nbr='25';
MESSAGE_TEXT
+%1 field missing+
why the framework not populating the field name? might be bug?
02. Compare the user group between these users.
03. Do the same steps in debug mode for these users, and check the log entry. You will get some points.

CMR-Field missing

None of my container managed relationships get added to the descriptors in
the ejb-jar.xml file just wondering if anyone has a solution.
thanks
Glenn

Hi Shankar,
You may check the following points to know cause.
01. Get the message text by using message category and message number.
Message text would be "%1 field missing"
SQL> select message_text from ci_msg_l where message_nbr='253' and message_cat_nbr='25';
MESSAGE_TEXT
+%1 field missing+
why the framework not populating the field name? might be bug?
02. Compare the user group between these users.
03. Do the same steps in debug mode for these users, and check the log entry. You will get some points.

Regarding Field Missing in Dso Transformation

Hi
Folks
I am facing the issue like
In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object 0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
so How can i get the field in DSO to Cube transformation.??
any settings have to be change???
waiting for yours Valuable answers
Regards
Anand

Hi,
Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
Regards,
Srinivas

Key Field missing in transformation

Hi
I am trying to use BI7.0 transformation (1-1 mapping basically) to send data from one DSO to another DSO
Source : DSO1
Key fields : Account ,Itemid, Position number
Target: DSO2
Key fields : Account ,Itemid, Position number
However when i create transformation i don't see "Itemid" in the source side in the transformation mapping. Rest of the two key fields are present.
Please help.
-Anurag

Hi, Anurag.
I just posted a question to the forum, because we are implementing the same architecture, and we are wondering how deltas will work with this
architecture. Are you using deltas?
The text of my recent post is below.
We are loading from R/3 into DSO1, and then from DSO1 into DSO2. The R/3 extractor that loads DSO1 is
delta-enabled. We are not sure, however, if a delta mechanism governs the load from DSO1 into DSO2. The
DTP says its extraction mode is delta, but does that mean, if a row in DSO1 changes, it will negate the key figures
on the original row and send a new row the way R/3 does?
For example, suppose the R/3 extractor sends us Row 1.
Row 1 has a key figure with a value of $100.
Row 1 gets changed in R/3, and the new value is $125.
The R/3 delta mechanism takes care of this by negating the key figure on the appropriate row and sending us a correcting
row. For example,
the R/3 extractor will send us:
Row 1 $100
Row 1 -100
Row 1 $125
So... the net value is correct, i.e. 100 - 100 + 125 = 125.
When we load from DSO1 into DSO2, however, do you know what rows will load into DSO2? Is BW "smart" enough to do this
type of negation?
Thanks!

Tax code field missing in F-63

Hi All,
I am working on a issue where we are not getting tax code field on F-63 screen after providing posting key 31 and Vendor Account.
I have looked at filed status group assigned to the Vendor Recon account and Field status variant assigned to Posting Key 31 but there is nothing to make tax code field as hidden/optional/required.
Can any one help me regarding this where some field is missing on one screen and that field is not present in Field status groups as well.
Thanks,
Amit

Dear Amit,
Please make your GL Account as Tax Relevant in FS00, it will show at the time of Booking entry..
Br,Vivek

Transformation - Fields Missing!!

Similar Messages

Maybe you are looking for