Transformation from ods to cube IN BI 7.0

Hi there, I will appreciate if anybody can help, I want to know if I want to assign the constant value to a field in transformation from ods to cube what is the way out.as i can choose the constant in update in BW3.5 but what is the step in BI 7.0
thanks
Soniya

Go to rule type column right clicj and select rule details. Under rule type u can fuind the option of constant.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
KJ!!!

Similar Messages

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

Loading from ODS to Cube in process chain

Hi Experts,
How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
Thanks,
Bill

Hi,
You can use a DTP for this.
Create transformation between DSO and cube.
Create DTP and run it.
Loading data from one cube to another cube.
Cube to cube data loading
how to upload data from cube to cube
Can we pull data from one cube to another cube
Data Load Steps:
Reading data from another cube
Hope this helps.
Thanks,
JituK

Error in updating data from ODS to CUBE.

Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
Value '04052007' for CHAR 0DATE is not plausible
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
REMOVED
Thanks In Advance.
Hitesh Shetty

Hello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Automatic loading from ODS to Cube in 3.5

Hi All
I was under the impression that in version 3.5 in order to load delta from ODS to Cube you had to run the 8 series Ipak.
However I have recently noticed that this ipak is running automatically after a delta load into the ODS even when the load is not via a process chain.
Can somebody where and how this setting is maintained.
Regards
A

Hi,
Go to ODS display mode and check if "Update Data Automatically" is ticked in Settings.
Regards,
Kams

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Updating the last date request from ODS to CUBE

Dear Friends,
Please can someone explain me.
i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
but i see in the ODS that all the data mart (tick) is available for all the request.
And please can someone explain me, if i have many request in the ods, current date previous day and so on.
Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
Thanks for your help.
will assign complete points.
Thank you so so much

Hi,
if you know everday how many request are getting updated in infocube as one request the you can check the added records in infocube .. it should be equal to the sum of all those request ..
but transferred can be more or equal .. also its depends on the
update rules ..designing ..
Hope this helps you ..
Regards,
shikha

Loading from ODS to Cube

I have a process chain for GL.
Data was getting loaded first to ODS and then to CUBE.
Now i there is no update to cube is scheduled. I removed 'Further Update' process from process chain.
During loading I am getting a warning message as follow:
There must be a type "Update ODS Object Data (Further Update)" process behind process "Activate ODS Object Data" var.ACTIVATE_ODSu201D
So plz suggest me any way to remove this warning message.
Thanx,
Vishal

Hi Vishal,
since you removed 'Further Update' process from process chain, this message is comming, i hope instead of this peorcess you are loading dta from ODS to Cube using Infopackge at process chain.
at ODS - setting uncheck setting Further update to data targets (i assume you are loading data from ODS to Cube using Infopackage at process chain).
Best Regards.

Debugging when data is mooving from ODS to CUBE

Hi Experts,
I am mooving data from ODS to CUBE...!
how to debugg to minimise the loading time.
Thanx in advance.
Vasu

hi Vasu,
put a 'break-point.' in your update rules' routine and
click icon monitor for the request in infocube->manage->request, will go to monitor -> tab 'details' - last node 'processing(data packet' -> right click any data packet and mark 'activate debugging in update rules'.
how to reduce loading time please refer to doc 'data loading and performance analysis'.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b
hope this helps.

How to delete init request when load is taking place from ods to Cube

Dear All,
I have initiated the init load from ODS to Cube, but the init request was not successfull... Now on clicking the init infopkg i get the short dump error....
I am trying to acess this infopkg so that i can delete the old init and reschedule it again...
Now in order to avoid this error i need to delete the init request somehow..... Since data load is happening in BW system only there is no way to go to delta queue and delete the init...
How can i delete the init request in this case or how do i avoid this dumup error???
Thanks & Regards,
Anup

From se11, go to the table, see the content... from this window mark the check box for relevant entries in the first column and click on Display button (F7)
enter "/h" in the command prompt and press enter
Click the top most green button to execute.
From the debugging screen, double click on variable "CODE" change the value to "DELE" (from "SHOW") and save (by pressing enter in bi7 and by clicking pencil icon in bw 3.x ).
Press F8
In the result screen you will find the delete entry in the application bar
Delete one by one after ensuring the record content.
Better you can ask any abaper to delete the table entries in the debug mode coz its a production server..else you can call me 9500066350(I prefer you to go along with abaper if you have no option dont wait for calling).

Init from ODS to Cube

Hi,
When I do an Init from ODS to cube. It extracts from Active data table
Example /BIC/AZSD_O52P00, say it has 3.5 million records.
My question can the number of records extracted (not transferred records) can exceed the number of entries than that of /BIC/AZSD_O52P00?
Thanks in advance.
Regards
Ajay

Hi Ajay,
It can if you split the records in the update rules between the ODS and the Cube using return tables.
Bye
Dinesh

How to ensure data from ods to cube are correct or not

hi all,
i am just trying to get data from ods to cube. how to make ensure that the records that i fetched from ods to the respective cube are correct and number of records are the same.
thanxs in advance
regds
hari

Dear Hari,
There are two ways of confirming correct loads:
1. Level by Level Analysis
2. Comparision with Virtual InfoProvider
First method is by analysing data at each level. First at Database Table (if loading from R/3) or Excel (if loading from flatfile), then at extraction level (See data at RSA 3, not possible with flatfile). After this load data to BW through PSA and check the content of PSA. After that load it to Infoprovider and varify there.
Second method is to create a Virtual Infocube on the datasource (extract exact data through FM). And create a multiprovider by combining this Virtual cube and original Cube. Then create a Query with calculated key figures as difference of each key figures from two cubes. This way you can say that which value is not matching.
I suggest you the first method, but the standard way would be second one at highly critical loads where you cannot match huge ammount of data.
Hope it helps...
Regards,

Transformation from ods to cube IN BI 7.0

Similar Messages

Maybe you are looking for