Transformation in inactive status
Hi,
Currently I am doing some enhancements to DSO (BP Role) and today I came to know the transformations for other DSO which is no where related to this DSO got deactived with my user ID. I really suprised that I have not touched this DSO and its Transformations but Transformations are inactive with my used ID.
Could you please let me how this can happend and how to prevent this kind of problmes in futuer..
All the relavent answeres will be rewareded with points...
Regards,
Venkat
Hi Moli,
Suppose DSO1 is providing data to DSO2. This means data is flowing within the BW itself between two different Data Targets.
Now to check the Data Mart go to the Manage screen of DSO1.
There you can see Req Id, Req available for reporting,Compression Status, and then next one is Data mart.
If the data mart field for all the request have a TICK mark against it then that means all the data which was supposed to be sent by DSO1 has been sent to DSO2.
If there is any request which doesn't have a TICK mark in Data mart field then that means that request is not been sent to DSO2(or not received by DSO2) till now
It just like checking whether both the Data Targets are in Sync or not.
Hope it helps.
Regards
Hemant Khemani
Similar Messages
-
Transformations are inavtive status for DSO 0PY_PP_C3
Hi all, first time I'm working for HR Payroll standard reports in BW, my reports are designed on infocubes and DSO'S, those are 0PY_PP_C1, 0PY_PP_C3, PY_C02, i activated all Infocubes and DSO's, my problem is Transformations are inactive status for DSO 0PY_PP_C3, when i activate transformations, it showing 1) Rule (target: 0RECORDMODE group: 01 Technical Group ): Constant is initial
2)End Routine: Syntax error in routine
3) You have not maintained a rule for the fiscal year variant .... can any one help for this...
Thank you for your helpHi Vipin,
Transforamtion btwn ODSO 0PY_PP_C1 -> ODSO 0PY_PP_C3
Could you please give me related answer
thnx for helping..... -
Sender SOAP adapter in inactive status
Hi guys,
I have a problem with my sender SOAP adapter.
In Int Directory, the channel is ACTIVE but in RWB, CC monitoring (soap adapter), this status is INACTIVE OR UNINITIALIZED.
I have changed this value and activated the change lists, and refreshed CPACache as well with no success.
Could you please help me on this?
Thanks in advance
DavidHi David !
check these two threads , wi9ll solve the issue , discuss the same
Inactive Status for a SOAP Adapter not working
SOAP Adapter - Channel started but inactive
Thanks!! -
Inactive status - v$session users list over WEB application
Hi all
When user connect through asp or asp.net, we create a connection in the session object. New sid gets created with each session.
When user normally logs out the application, his sid gets finished in the v$session users list. But when he dees not logs out in the normal way as we can not force thousand of users over WEB to log out normally, what will happen to the v$session ?.
1st - We wish to know to know that whether the list will run into thousands of inactive status users OR they automatically gets finished over time. We use the default profile as applicable to new user.
2nd - If the list of inactive status users gets increased to thousands of users which can be possible for the WEB application , there must be some limit fixed by Oracle 8i/ 10g database OR there may be serious performance problems. This simultaneous connection of thousands of users over WEB is easily possible and when connection is created in session object , what could be the scenario. We avoid creating connection object in the application start event to improve performance for the given sesion.
Any help is appreciated.
Suresh bansalThanks for prompt reply
1st - Can u give some idea for create connection pools using asp.net environments. Further in the connection pool environment as to how much simultaneous running connections we should need to open and how.
2nd - If we have pool of say 100 connections and there are more number of simultaneous WEB users, what will happen to the application as to whether it gets to hanging /waiting for the pool connection to be free or give error ?.
Suresh Bansal -
Table name to display status for maintenance plan with active /inactive status
i need status table which display only active/inactive status of the maintenance plan.
really it helps me ..........
thanks raymond
regards,
priya -
Profit centre - block for posting and put as inactive status
Hi Guru,
I want to block a profit centre from being posted to AND put the status as inactive.
I checked on the Lock indicator and the profit centre automatically becomes inactive. However, I can still post to the PC.
I noticed that if the PC has an "Active" status and the lock indicator on, then I cannot post to the PC.
What have I missed? Do I need to make the setting in a special sequence??
LindaHi,
Here is the step-by-step:
1.Go to T-code KE52 and call up your profit center
2. Go to the Indicators tab and put a check in the Lock indicator
3. Save:
Note that this will save your changes in an Inactive Status. You may be thinking that is a good thing and that youu2019re doneu2026I was. But youu2019re not. If you go to FB50 or 9KE0 and try to post to that profit center, it will let you post away all day long. One more step.
Click the Match stick button to Activate your new state:
Do not mess with the Validity periods unless youu2019ve got a good reason to. The real key here is setting the Lock indicator and making sure that is Active. Think of it as Actively locking your profit center.
Thank you
Pradeep -
In HCM form & process Workflow event linkage changed to inactive status.
Hi,
In HCM form & process event linkage is activated in HRASR_DT and workflow object .
Now once we complete the process from EP portal ,reference number is generated and enteries are created in table T5ASRPROCESSES .
In SWEL,event is triggered and linked with the same workflow.
Now the problem is,thesre is no workitem in SWIA with this workflow numbmer and the event linkage also changed to inactive status ( both in proces and workflow )after we complete the process from EP.
Thanks
ManojHi
When you are delaing workflows with HCM Process and form the behaviour is slightly different from the normal.. In order to check why the event linkage is inactive the possibilities are
1. Either there are some chnages done in the workflow and it is not activated from the transaction HRASR_DT.
2. The other possibility is that you might have directly actovated the workflow from SWDD transaction and if you have done in this way then it is a wrong way of generating and activating the workflow
Follow the below steps to find the error
1. Execute HRASR_DT txn and try to activate the workflow from here. If you try to activate the workflow from this transaction the check function module which is linked to the workflow will be knowing that for which specific process which workflow has to be triggered..
so in HCM process and forms frame workf it is always suggestable that try to create the workflow from HRASR_DT transaction using forward navigation and activate the respective event linkages.
The other point you need to check is make sure that all the respective program exit classesare included in the basic data of the workflow other wise even if you miss the program exit classes in the basic data the workflow will not be able to start its process/execution.
Regards
Pavan -
DS is showing in red and its inactive status got disabled
Hi Guys,
I tried to add some fields in lbwe,maintanance by making its status as inactive.After adding the fields the data source inactive status got disabled and the data source is showing in red.
any idea..........Hi,
Has the update process for the datasource was stopped before changing the structure ??
Hope that helps.
Regards
Mr Kapadia -
Profit center 1101 saved in inactive status
Dear ALL:
I have created a Segment in SPRO in Enterprise structure. Now i want to assign it to Profit centre ,when i assign it to a newly created profit centre it saves the profit centre in inactive status. Actually i want to post revenue entries to new segment created through its assingment in Profit master data. But it disables the profit centre and hence posting cant be done.
RegardsHi
in IMG > FI (new) > Ledgers > Ledger > Assign Scenarios and Customer Fields to Ledgers
Check if you have assigned the scenario FIN_SEGM to your leading ledger
Regards
Ajay M -
The Comunication channel is still running when is inactive status or delete
Hi guys!
I'm facing a problem with JDBC Sender´s communication channels.
First, The Comunication channel was running ok, suddenly fail because the sentence select does not take the information available in the database. obviously the update sentence is not working too.
My solution in order to solve that, is create a new one Communication Channel equal to previous one, and put in inactive status the old one.
Everything works fine again!!!!
later (maybe one week or one month, the time is variable) this communication channel doesn´t take the information, again like previously comm. chann., i have identified that the problem here is that the old-inactive communication channel still working and take the data.
My solution in this case is eliminate the select and update sentence for the old-inactive communication channel.
But suddenly the comm. channel actived have the same problem.
The solution could be to do the same, but i will be in a cycle. Somebody have an idea how can solve this issue in a final way.
Thanks in advanceHi David,
In my view, such problem does not occur due to JDBC Communication Channel configurations but due to one of the following reasons:
1. The SAP Server was restarted:
In my previous project this used to happen once in a month that the SAP server was restarted once after every month. During that time the connection of JDBC used to go down because the connection was reset and because of which the JDBC DataSource in Visual Admin was unavailable.
2. The Database is unavailable or the Server on which DB resides restarts or the DB Service was restarted:
When any one of the three mentioned scenarios occur then the connection with the DB is reset and the JDBC Datasource becomes unavailable.
To resolve the above two situations, you need to restart the JDBC DataSource in the Visual Admin residing on the SAP Server.
Hope this information is helpful to you.
Thanks,
Arkesh -
Transformation Transports inactive
Hi All,
I am transporting some Transformations using Transport Connection and selecting only necessary objects. The first import fails with RC 8 and the following:
Unknown error from the Transport Organizer
Error while activating transformation
Error when activating Transformation 0FI5WAZTHGV66TREPIY6ABUQIKF8028S
When I re-import the request, it completes with a RC 0, but the Transformations are left with 'Active version does not exist' ie inactive.
We've applied SP8.
Any help greatly appreciated.Hi ,
We also faced the same problem. Delete the Inactive transformation in the target system and move the new request(only transformation )again.
Regards
Josu -
ODS and Transformations get inactive after i transport it in PD.
i have transported my ETL model in production , Now Everything what we have transported has come into production system but transformation and ODS in our ETL model get inactivated . Also while i want to display the transformation it give massege that " 'the infosource that we have created before the transformation in not active and can not be used . '
Our ETL model is like
Cube(now Active) --- tranformation(Now is in not active state) -- ODS(Now is in not active state) -- transformaion(Now is in not active state) -- infosource(Now in active state) -- transformation(Now in active state) -- PSA .
the part ": tranformation -- ODS -- transformaion " gets inactivated after transportation also DTP which pull data from ODS to cube also get inactive .
Please suggest me to how i can activate these inactive object or i have to transport these object again to PD
Thanks .Hi Bryan ,
Yes data was their inside the ODS while transporting , Now i have successfully transported the request , nd now activating ODS transformation nd DTP . Actually i got a prog to activate transformation and DTP and want to share with all ... . i juz activate mt DTP and transformation though these prog .
Program for DTP ACTIVATION
*& Report ZDTP_ACTIVATE
*Coded by NBS BI team
*Date: 15-JAN-2010
*Function: For DTPs activation
REPORT ZDTP_ACTIVATE.
TYPES: BEGIN OF t_dtp,
dtp LIKE rsbkdtpstat-dtp,
objstat LIKE rsbkdtpstat-objstat,
src LIKE rsbkdtp-src,
tgt LIKE rsbkdtp-tgt,
END OF t_dtp.
TYPES: i_dtp TYPE STANDARD TABLE OF t_dtp.
DATA: lv_output(255) TYPE c,
lv_subrc TYPE sysubrc,
tab_dtp TYPE i_dtp,
r_dtp TYPE REF TO cl_rsbk_dtp.
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_id TYPE char35.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
FIELD-SYMBOLS: <fs_dtp> TYPE t_dtp.
REFRESH tab_dtp.
SELECT * FROM rsbkdtp AS a JOIN rsbkdtpstat
AS b ON adtp = bdtp INTO
CORRESPONDING FIELDS OF TABLE tab_dtp
WHERE a~dtp = p_id AND
a~objvers = 'A' AND
b~objstat = 'INA'.
IF tab_dtp IS NOT INITIAL.
LOOP AT tab_dtp ASSIGNING <fs_dtp>.
CALL METHOD cl_rsbk_dtp=>factory
EXPORTING
i_dtp = <fs_dtp>-dtp
RECEIVING
r_r_dtp = r_dtp.
IF sy-subrc = 0.
CALL METHOD r_dtp->activate
EXPORTING
i_objvers = rs_c_objvers-modified
i_force_activation = rs_c_true
i_show_check_protocol = rs_c_false
i_with_cto = rs_c_true
IMPORTING
e_subrc = lv_subrc.
IF lv_subrc = 0.
CONCATENATE 'Activated DTP : ' <fs_dtp>-dtp ' : ' <fs_dtp>-src '->' <fs_dtp>-tgt INTO lv_output.
ELSE.
CONCATENATE 'DTP : ' <fs_dtp>-dtp ' : ' <fs_dtp>-src '->' <fs_dtp>-tgt ' Could Not be Activated' INTO lv_output.
ENDIF.
ENDIF.
WRITE:/ lv_output.
ENDLOOP.
ELSE.
WRITE:/ 'DTP is not Inactive'.
ENDIF.
Program for TRANSFORMATION ACTIVATION
**& Report ZTRFN_ACTIVATE
*Coded by NBS BI team.
*Date: 15-Jan-2010
*Function: Activates in-active transformation only.
REPORT ZTRFN_ACTIVATE.
TYPES: t_tran TYPE rstran,
i_tran TYPE STANDARD TABLE OF t_tran.
DATA: r_tran_maintain TYPE REF TO cl_rstran_maintain,
lv_subrc TYPE sy-subrc,
lv_output(255) TYPE c,
tab_tran TYPE i_tran,
i_s_source TYPE rstran_s_tlogo,
i_s_target TYPE rstran_s_tlogo.
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_id TYPE char35.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
FIELD-SYMBOLS: <fs_trans> TYPE t_tran.
REFRESH tab_tran.
SELECT * FROM rstran
INTO TABLE tab_tran
WHERE tranid = p_id AND objvers = 'A' AND objstat = 'INA'.
SORT tab_tran.
IF tab_tran IS NOT INITIAL.
LOOP AT tab_tran ASSIGNING <fs_trans>.
TRY.
CREATE OBJECT r_tran_maintain
EXPORTING
i_tranid = <fs_trans>-tranid
i_s_source = i_s_source
i_s_target = i_s_target
i_expert = rs_c_false
i_mode = rsawc_c_tfc-display
i_with_message = rs_c_true.
CATCH cx_rstran_not_found .
CATCH cx_rstran_input_invalid .
CATCH cx_rstran_cancelled .
CATCH cx_rstran_not_authorized .
CATCH cx_rstran_display_only .
CATCH cx_rstran_already_exist .
CATCH cx_rstran_error_with_message .
ENDTRY.
CALL METHOD r_tran_maintain->check
EXPORTING
i_with_display = rs_c_true
IMPORTING
e_subrc = lv_subrc.
IF lv_subrc = 0.
CONCATENATE 'Activated Transformation : ' <fs_trans>-tranid ' : ' <fs_trans>-sourcename '->' <fs_trans>-targetname INTO lv_output.
ELSE.
CONCATENATE 'Transformation : ' <fs_trans>-tranid ' : ' <fs_trans>-sourcename '->' <fs_trans>-targetname 'Could Not be Activated' INTO lv_output.
ENDIF.
IF lv_subrc = 0.
TRY.
CALL METHOD r_tran_maintain->execute
EXPORTING
i_wrkmode = cl_rstran_stat=>wrkmode_activate
IMPORTING
e_subrc = lv_subrc.
CATCH cx_rstran_cancelled .
CATCH cx_rstran_error_with_message .
CATCH cx_rstran_display_only .
ENDTRY.
ENDIF.
WRITE:/ lv_output.
ENDLOOP.
ELSE.
WRITE:/ 'Transformation is not Inactive'.
ENDIF. -
I just switched over to an iPhone 4 CDMA on the verizon network the other day. I connected with my MBP/ w Lion and the sync seemed to go flawless.... All my date was pushed thru the iCloud, but then I saw that my main email address @me.com says that it is inactive when I look at it in Settings- Mail-Accounts. I can see that the iCloud account name and password is wrong, but I can not seem to find out how to correct it. Can anyone help me?
Thanks a lot,
FredYou either have an incredibly complex computer setup or I think you are confusing terminology here. If you have iTunes set to share your library with others in your iTunes preferences then other computers in the area will see it as an item when they are running their iTunes and have it set to check for shared libraries. Your husband is probably seeing this when running iTunes on his computer. You can disable this sharing on your computer and/or he can set his not to pick up shared libraries.
By the way, an iTunes account is something you log into when you want to buy something from Apple. On your computer it is simply your iTunes collection or your iTunes application. So you need to turn off sharing in your iTunes application preferences.
Your husband is seeing "his" iTunes collection when running iTunes, but it is possible he doesn't have anything in it if it is a brand new computer. -
Datasources are inactive status in r/3
hi frds,
i am facing strange issue..
I have activated the MM related datasources 2lis_02_hdr and itm in LBWE in R/3 Devmnt and transported them into R/3 prod, but still those are in in-active status only in R/3 prod..
in transport log i am seeing some warning msgs..
<b>Table ZZMC02M_1HDR was activated with warnings
Message no. DO520
(W- Enhancement category for include or subtype missing )
Table ZZMC02M_1ITM was activated with warnings
Message no. DO520
(W- Enhancement category for include or subtype missing )</b>
and i have selected industry sector as 'standard'
we are into ECC6, Am i missing anything ?
pls share your experiences
thanks
Message was edited by:
Sha BWHi Vidya,
My ques is when we do all the customizations in LBWE for any datasources , system prompts a request...
As Mahesh said, in LBWE that request should be assigned to customizing request not workbench reqst ... but im unable assign the request to customizing request 'coz the system is prompting workbench reuquest.....
i have already created 1 customizing reqst in se01.. how can i use this custmizin req in lbwe
im doing all the customizations in dev box only..
thanks -
PM-PP integration: equipment set to inactive status
Hi,
In the case where an equipment is used as a production work center (in equipment master data , 'location' field filled with PP work center) : when equipment is set to inactive, we can't create a PM order to this equipment : that's fine.
My questions are:
-is there a way to block this production work center from a capacity perspective?
-is there a way to have the information that a production order has been created on the inactive equipment/production work center?
Thanks in advance
P.-is there a way to block this production work center from a capacity perspective?
This is not possible in std. SAP, you may have to use the exits to achieve this. Have a look at these exists: IWO10002 PM Order: Customer Exit Before Release and PPCO0007 User Exit for Checking or Changing Header Fields During Orde
is there a way to have the information that a production order has been created on the inactive equipment/production work center?
I think you can view this in the planning board of the work center, if you are using capacity planning.
Praveen
Maybe you are looking for
-
MESSAGE TO APPLE: YOU HAVE A NUMBER OF UNHAPPY CUSTOMERS...
I apologize for leaving this potentially unpleasant message, but I logged into the Apple discussion board to find a solution to what I thought was something I had done wrong...instead, I find numerous people who have been affected by the EXACT SAME i
-
Hello I have just finished a dbcopy of Maxdb 7.6 to a new system with initilization.i can bring the db online. I have ran the xuser command to fix the db users as below command as per note 39439 i changed them in home dir of sidadm,sqdsid
-
How do i disable the rotate view tool?
Im using photoshop cs4 on a mac. the rotate view tool and hand tool keeps rotating my canvas of its own acord. is there anyway to disable these tools since i have no need of them. grateful for any help, thankyou
-
Microphone dos'nt work in phone mode
Hi, from one day to another, the microphne my iphone does not work in phone mode. It works by recording mode (Dictaphone). I have version 6.1.3 Do you have any idea? Thank you in advance
-
hi what the cause of this error? Could not load file or assembly 'Microsoft.QualityTools.Testing.Fakes' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))