Transformation is not getting Active.

HI
In DEV system , the transformation from Data source to Info source is in Active.when i press on change button .The transformation is in INACTIVE...Then i want to make it in active .....its not getting ACTIVE...showing not executable ...AND displaying an error ...
Rule 12 (target field: 0CRM_OBJ_ID group: 01 Standard Group): Source and target field length
Message no. RSTRAN563
Diagnosis
The length of the target field is shorter than the length of the source field. This can lead to information loss.
System Response
During the update, the values are shortened to the target field length.
when i check the start routine.....
Field: CLMREGNO Clm Reg No.
CLMREGNO TYPE C LENGTH 12,
when i check this field ( clmregno ) it is being used in different system.The size of the data is 11...
For the target field (0CRM_OBJ_ID) the length size is 10 .....How can i make it in Active ???.
whereas in Qlty and Prod System the same process is Active.Data is getting Loaded.
Thanks in advise.
Best regards,
kaleem.

hi all,
The actual data clmregno is in format
40100771646
30100014767
30100015004
30100014653
40100772077
40100788014
But , i am not getting the correct code/logic ...to set.
Appreciate if someone who is familiar in this help out.
Thank you.
Regards,
kalim.

Similar Messages

Version 1 is not getting activated in PR and PO

We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
Full points will be awarded.

Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Dear Amir,
in pr version management , control data :select version active,version 0 ok, & external ok. &
field selection : reason required,short text req., requester req., external number & posting date are optional & save.
even with release strategy there is no problem
create a pr & save it.After release it. change the pr
after u canfind the versions 0 & 1.
in po version management , doc.category f doc.type nb pur.org xxxx ,control data :select version active,version 0 ok, field selection : reason required,short text req., requester req., external number & posting date are optional & save.
go to Set Up Change Displays as per standard nb is already there no need to change & category is blank
in category u have to maintain f(is for po) & save it.
create a po & save it.After release it. change the po
after u canfind the versions 0 & 1.
Regard's
Raj.

Function Module Not Getting Activated

Hi,
We are using a customised function module which we are calling in a user exit. We would like to call this function module in update task in the user exit to populate data in a custom table.
We have given the following parameters to the function module
Import Parameters
ITAB LIKE ZPRUNDAT
Export Parameters
l_subrc TYPE sy-subrc
On the attributes tab of the function module, Update Module has been selected under processing type.
When we try to activate this function module we get the following message
EXPORTING parameters are not allowed in the update task.
and the function module does not get activated. What should we change to get the function module activated?
Mick

Hi,
Please try this....
In function module
In tables Section add this...
RETURN TYPE BAPIRET2 and then activate.
if its useful reward points

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

OBUSOBJECT Blocked for conversion and not getting activated

I have changed the infoobject OBUSOBJECT attribute 0Mainusage fron <b>navigational to display</b> and then tried activating the OBUSOBJECT , , OBUSOBJECT If in the former active version this IO had 0MAINUSAGE as a nav attribute, now, in a revised version, this is just display attribute. surprise that the OBUSOBJECT couldnt be activated by installation.
Please tell me what are the steps now to resolve this. i want to actiovate the OBUSOBJECT in either old active version or activate with new revisions. i am just stuck since it is not getting activated.
please tell if i go to se16 and <b>sdokmia</b> table in first row i put BW* and then in
3 rd row i put what attribute since when i put 0Mainusage (/BI0/OIMAINUSAGE)
it does not show any record what should i put there?? and then what is the next step. if you can help me step by step.
please help me to resolve this
Regards
Soniya Kapoor

Hi Soniya,
If i have understood you properly, you have one attribute of the infoobject navigations, which u changed to display and tried activating and its not getting activated. This particular attribute is used in some othe cube as navigational attribute as well. Without deleting those references, u want to change the infoobject.
If thats the case, you will not be able to activate ur infoobject. All the reference have to be revoved before activating the object. Sorry for that
Regards
Sriram

I have upgraded to IOS 7 and now I wish I did not as I have lost face time and iMessage and they would not get activated no mater what I have tried .it seems they are trying to get connected but are unable to do so.

I have upgraded to IOS 7 and now I wish I did not as I have lost face time and iMessage and they would not get activated no mater what I have tried .it seems they are trying to get connected but are unable to do so.
It is becoming frustrating to try to get it activated .
I do not know how to get it activated when it keeps informing me that there is no net work connected
Could not sign in please check your network connection and try again.
For both iMessage and FaceTime .
Any radical solution that you have will be appreciated as it is becoming frustrating .

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Sim not getting active

Sim not getting active it's been 8 days now. Keep on getting told today tomorrow 24 hrs, still no luck. Now I've been told my account needs a profile. I've contacted trading standards they told me to give it another 24 hrs. What do I do

You can try going to Settings>Mobile Networks>Network Operators, and then choosing "Select automatically" (or something to that effect) or if that doesn't work, try "Search networks" and selecting EE. This will force the phone to try and register on the EE network, it has resolved the same issue a few times in the past.

Charged for 1.41$ ( Trial fee 2 times and did not get activated )

I have tried to to buy Azure but I have noticed there is a free trial. So I decided to go for that because why not? 2 days ago I have tried to sign up and I got charged for 1.40$ but nothing was activated... So I was like ok that is just a dollar who cares.
Then today I have tried to sign up again and got charged for 1.41$ but azure threw an error saying that this was declined etc etc.
Today payment:
MSFT *ONLINE~~80092483~18 372
-1.41
Accepted*
08-06-2014
2 days ago:
MSFT *ONLINE~~80092483~18 372
-1.40
Accepted*
06-06-2014
Still not getting activated. Hoping to hear back from you and have a trial of azure. Thanks!

hi,
It is a account issue. I suggest you could try this channel:
Having issues with sign in or signing up for an account?
Please try it.
Hope this helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Exchange Connector not get Active Directory Object_GUID

Hi all.
I've upgraded the Exchange Connector to version 11.1.1.5.0 and I have a issue.
The connector is unable to get Active Directory Obejct_GUID and populate the ReturnValue field in UD_MSEXCHG and the provisioning user in Microsoft Exchange is not completed.
Anyone can help me ?
Thks,
Joel

Hi all.
I've upgraded the Exchange Connector to version 11.1.1.5.0 and I have a issue.
The connector is unable to get Active Directory Obejct_GUID and populate the ReturnValue field in UD_MSEXCHG and the provisioning user in Microsoft Exchange is not completed.
Anyone can help me ?
Thks,
Joel

I have restored my iPhone 4S and I m trying to activate my phone but its not getting activated

I have restored my iPhone 4S to ios 8.2 and I m trying to activate
my device write this:
your iphone could not be active because the activation server cannot be reached.try connecting your iphone to itunes to active it,or try again in a couple of minutes

Welcome to the Apple Community.
Have you tried either of the things the message suggested.

HT1349 after installing iso 5.1 verision for my iphone 4 its not getting activated

after installing iso 5.1 version for my iphone 4 its not getting activated

iOS 5.1 is currently in beta and its a developer only release. Discussing more details to this isn't really permitted on the public forums.

Getting conversion PDF to MSWord? paid subscription but did not get activation - What to do?

I paid the subscription price of $19.95 to enable conversion of an Adobe PDF file to MS Word. But it never shows up as active in the Tools list. How do I get Adobe to retrieve and activate? I do not see any e-mail way to contact customer support.

Which service exactly did you sign up for? If you go to My Adobe at http://www.adobe.com/ you can select My Subscriptions and Services to see what you have signed up for.

DbAdapter is in prepared State- Not getting Activated.

Hi,
I am creating the connection pools in cluster environment. I made that DbAdapter to target to all servers in cluster. The connection pools are also getting created without any error. Updating the DBAdapter is also nt a problem. But the DbAdapter is not returning to active state it is in prepared state.
Plan.xml is updated with the created connection pools name and also i have made this Plan.xml files to be available to all managed servers.
All data stores are in running mode. But the status of connection pools is in suspended state. And also the connection pools are missing in the JNDI tree. Nothin is present in eis/DB folder. So what shal i do make the db adapter to be in active state. Please help me.
Regards
Prabhu

Hi Prabhu,
Which version and release are you working with? Have you checked managed server logs for any error while updating/re-deploying the DBAdapter?
Regards,
Anuj

Web Service is not getting activated

Hi Experts,
We don't have PI in our landscape that's why I enhanced the web service 'BusinessPartnerSUITEBulkReplicateRequest_In' with some 'Z' fields directly in MDG box and also created binding in 'SOAMANAGER' for above service and it is showing as active.
Now, when I am going to these service via 'SPROXY' and trying to save I am getting error 'Proxy Generation: Error Occured', please find attached screensot.
And when I am trying to activate, its not activating and giving error 'Service Provide INTFII_MDG_BP_RPLCTRQ', please find attached screenshot.
Regards,
Sudhir Wakodikar

Hi Reema,
Thanks for your reply.
But here I am not doing replication, I am working on initial upload of vendor master.
For all the standard fields its working fine.
but we have some 'Z' fields so I enhanced the web service with 'Z' fields after that I am not able to save and activate the web service.
Please find above screenshot for error.
Please let me know if I am missing some setting or anything.
Thanks,
Sudhir

Management of Global Employees not getting activated

Dear All,
I have activated the Management of Global Employees by maintaining the system switch CCURE-GLEMP as X. But when I am trying to access the infotypes maintenace for global assignment such as 702,703,705 etc, I am getting th error that "Infotype XXX is not available".
Please let me know how to resolve this issue,
With Regards,
Kaustuv Goswami.

Hi,
there are some specific OSS - notes on this issues which atate some coding that needs to be changed as well. Search OSS.
Also, as noted in OSS, inform SAP that you're going to use this functionality.
Wilfred.

Transformation is not getting Active.

Similar Messages

Maybe you are looking for