Transformation Issue

Hello Everyone,
I have installed all the SAP BI infocubes and ODS in the BI 7.0. Everything is working fine. Suddenly the basis guys installed new support pack in BI, now i am having some data load issues.
I am getting the start routine syntax error but the transformation is active.. its very strange.. i dont have any clue .. see the error below.
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
Need your help.. i am unable to figure it out the error.
Thanks in Advance.
Lasya.

Hi,
we had similar issue as the structure of source object was changed.
Currently, you can only correct these errors manually, as described below: SAP is currently preparing a note for automatically adjusting the type '_ty_s_SC_1_full'. As soon as it is available, it will be included in the 'Related notes' section of this note.
The workaround:
Copy the field list of the type '_ty_s_SC_1' from the 'private section' of the CLASS lcl_transform DEFINITION (you can find this when you scroll up in the routine editor) to the type '_ty_s_SC_1_full' of '2nd part global'.
It should help.
Regards,
Sally

Similar Messages

Transformation issue, need to break the lines.

Hi,
i had requirement in which i need to read only headers in file and write it into single file.
so i used transformation activity in which i mapped only header. But my issue is all the header records are written in single line.
I need it in separate lines. Please guide me how to break the lines in xslt

Here there is a post about the same: https://forums.oracle.com/thread/505159
Please, share some sample input, desired output, as well as the XSL you already built, in case you need more help.
Regards
Luis F Heckler

Transformation issue while using IF condition.

hi everyone,
i am using bpel transformation based on the condition of field using IF condition.
A       B          C          D
10     20          30          40
20     20          30          50
30     30          20          60
40     40          20          70
now i need to apply IF condition in transformation on the filed B. if B = 20 transfer the data to one table or B NE 20 to other table
now my issue is, it is able to differentiate the rows, but the data in the field in second table remains same 20.
as i hope its storing the data in buffer location and writing it. after mapping with the fields in source.
can anyone suggest, how to get the actual value after differentiating the records.

Declare an internal table with two fields lar and another field for seconds.
IF v_lar01 = 'MSTD' and v_vge01 = 'MIN'.
it_time-lar         = lar1
it_time-seconds = t_plpo-vgw01 * 60 " minutes to seconds
else.
it_time-lar         = lar1
it_time-seconds = t_plpo-vgw01 " second
endif.
append it_time.
IF v_lar02 = 'MSTD' and v_vge02= 'MIN'.
it_time-lar         = lar2
it_time-seconds = t_plpo-vgw02 * 60 " minutes to seconds
else.
it_time-lar         = lar2
it_time-seconds = t_plpo-vgw02 " seconds
endif.
append it_time.
and so on...at the end sum it_time-seconds and do the calculate to get hrs n minutes from seconds
Mathews

Transformation Issue for 2LIS_03_BF

Dear All.
I am facing very strange issue for 0IC_C03 with the transformation of 2LiS_03_BF the cube was first got loaded from our Sandbox and every thing was fine, latter we connect BW development with R/3 development.
i have transfer all the data source for MM Inventory and try to create the transformation for 2LiS_03_BF for the infosource 2LIS_03_BF_TR but it did not map any field, but with the sand box client with the same data source it mapped all the fields.
Also when i try to load the 2lis_03_bf it make all the key field values to 0 even the process key is determined correctly in the R/3 side and Industry determination is alo set and also in BF10 BW is selected.
i try to debug the update rule and found that the process key and the value is updated correctly in the routine but after that there is an exception coming CX_RSROUT_SKIP_VAL.
please help....

Yes reinstalling the business contents solve the problem and it come up with all the mappings but the strange problem is that all of my key figures after loading showing '0' value.
i try to simulate the DTP by applying a break point on one routine and during the debugging it is filling the correct values and after some steps its throwing a CX_RSROUT_SKIP_VAL exception which might deleting the target value.
i am totally lost that why this exception is coming as before it never comes it only comes when we connect the development system and try to load the cube from there.
in between can you please help me out for getting rid of this exception.
thanks & best regards,

Inventory 0IC_C03 Cube Transformations issue BI 7

Hi Experts,
we are Installing Inventory Cube 0IC_C03, with In dataflow options in BI 7, 2LIS_03_BF transformtions is in Active State, while 2LIS_03_BX transformtion and 2LIS_03_UM transformtions are in Active.
and for most of the Keyfields in Cube are not mapped with infosource fields.
can any body implemented Inventory in BI 7 system, any body faced this issue. can you please share how you resolved this issue.
we are on BI Content 703 11 version.
Regards,
Raj

Raj,
No need to check start routine code for this.
Goto Transformation --> Change mode --> Choose Rule Group (on top of window, middle of the screen) --> Choose 05 --> Dispay mapping --> check routines available or not.
Confirm back are you able to see filed routine or not...!!
Check doc: [Rule Groups in Transformation|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2]

Execute a query using ABAP (XSLT transformation issue)

Hello,
I made the steps from this blog (part I, II and III).
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
When trying to run the XSLT transformation, I got the message that : XML invalid source file.
I am not sure what are the steps for running a transformation, or running it for this case ,maybe something it's not ok. I just run it, did not provide any information.
Any suggestions ? Did anyone use the function module described in this blog ?
Thank you very much in advance.

try giving
CALL TRANSFORMATION (`ID`)
SOURCE meta = meta_data[]
output = <ltable>[]
RESULT XML xml_out
OPTIONS xml_header = 'NO'.
and check - sometimes the codepages configured in the BW system tend to cause an issue... I am not sure if the syntax is right though - but you are basically trying to bypass any encoding that is happening in the query transformation....
http://www.sapetabap.com/ovidentia/index.php?tg=fileman&sAction=getFile&inl=1&id=4&gr=Y&path=ABAP%2FABAPENANGLAIS&file=ABAP-XML+Mapping.pdf&idf=41
Edited by: Arun Varadarajan on May 18, 2009 11:28 PM

BPM - two FORKS and a Transformation issue

my scenario is File - BPM - Proxy
input file has multiple records and each record has 1 field that we put a validation logic in. There will be one message created for each record, so this is a 1:N Integration Process
I used two Forks:
Fork #2 has two branches: Branch 1 --> Transformation Step 3;     Branch 2 ---> Fork #1.
Validation#1 = if the validation field has null value then it will go to Transformation Step3 along Fork#2 (end receiver is Proxy-C)
validation#2 = if the field has value then it will go inside Fork#1 which has 2 branches: Transformation Step 1 (goes to Proxy-A) and Transformation Step 2 (goes to Proxy-B)
I am testing a file with only the null value, so I am doing validation#1 only.
I can see the message in BPE engine (Outbound status = Processed successfully) but the message is stucked in the BPE
I checked on the workflow log and here is what i see:
1) Transformation Step 3 is executed (all mapping steps 1-4 completed so this is successful)
2) Transformation Step 2 is executed (but mapping encounters an exception so this is not successful)
3) Transformation Step 1 is not executed already because of the exception, and therefore Send Alert is triggered.
It seems that all records of the file passes through all the branches, which is not intended.
My intention is that when the validation field has null value that record will only pass thru Transformation Step 3,   if it is not null then record will pass thru Transformation Step 2 & 1.
I already created a mapping for this validation, and when I test the Interface Mapping for Transformation Step 3 (consisting of 4 mapping steps) using an actual payload it is successfuly generating the message. - so no problem in this Interface Mapping.
But on Runtime, BPM triggers exception due to validation#2 failing which again is because all records of file seem to pass on both Forks. I want that when Validation#1 is true that specific record only passes in Fork#2   and not in Fork#1 also.
I am using ParForEach.
Can you kindly advise how to correct this issue?

that was a very detailed explanation!
But on Runtime, BPM triggers exception due to validation#2 failing which again is because all records of file seem to
pass on both Forks. I want that when Validation#1 is true that specific record only passes in Fork#2 and not in Fork#1 also
problem with your design...Fork seems to be working fine....you need to have a Switch block which will perform the validation and then route the message accordingly.
I already created a mapping for this validation, and when I test the Interface Mapping for Transformation Step 3
(consisting of 4 mapping steps) using an actual payload it is successfuly generating the message. - so no problem in this
Interface Mapping.
Mapping success does not mean that the BPM processing will be success.

Data Transformer Issue

Hi,
when i run GL Interface data Transformer program it is giving below error.
If you specify Filter condition you have to specify filter value.
i already entered filter condition and also value. If any one know sloution about this issue.
could you please help on this.
Thanks & Regards
Varma

Hi Nisman,
This is a known issue and is related to a Windows library MSXML please have a look at the following note on Metalink: 548868.1.
This has been fixed in ODQ 10.1.3.5 I'd recommend to upgrade.
Thanks,
Julien

Transformation Issue: HR - PA

Hi,
I'm working on SAP HR-PA stuff.
In standard data flow, 0HR_PA_0 & 0HR_PA_1 datasources feeding data to 0PA_C01 Cube.
Our detailed reporting requirements demands me to insert a DSO in between. I created a DSO with same fields as cube, and copied all the routines in the update rules and loaded data and everything is working fine.
Now, I wanted to use BI 7.0 functionality, So, i selected update rules -> Additional functions -> Create Transformation. .
This will convert all 3.5 routines into BI 7.0 routines, I guess.
But, after the data loads, surprisingly these transformation populating wrong data into DSO.
Is this the right way to create transformation from update rules?
Thanks,
V

Hi Vas,
I just read your thread on sdn for 0PA_C01 cube.
I need a small help from you.
I am also working on the same cube, same like you I am migraitng the data flow from 3.5 to 7.0. I have few routines in the update rules which i need to convert it to oops abap in bi7. You have this cube in 7.0 already. So, can you please send me the routine code you have. Actually i am not a abaper and my client also dont have any bw-abap person. I need to do some manual changes in the code. My data flow is exactly same as your data flow. I am unable to solve this problem from long time.
And also I need to put dso inbetween the flow as per our clients requirements. So where did yu out the start routines and infoobject routines in update rules of 3.5 to 7.0, i mean at what stage?, before dso or after dso? Also I have the INCLUDE in my routines that I am worried about.
If you provide me the code, i will really appreciate it. And in future we can share the knowledge as well.
Thanks.
Regards,
Harshal Panchal

Transformation issue while connecting multiple source system of same type..

Hi,
I'm working on APO-BW integration project. I want to connect BW QA & BW PROD to APO QA. I've already connected BW QA to APO QA & it is fetching data correctly. RFC part & other BASIS part is already taken care of. I've done export datasource (for mater data, cube etc) in BW PROD & replicated in APO QA. All BW PROD datasources are imported as RSDS (7.X) in APO QA.
Now my question is how to make sure the transformations will take source system as BW PROD too? I want 2 datasources (one from BW QA & other from BW PROD) to connect to same inforprovider in APO. I've transported 7.x datsource from APO DEV to APO QA environment along with transformations. In conversion of logical system names in APO QA I've given source system -BW DEV & target system - BW QA. So the transformation automatically takes data source as BW QA. It doesn't take source-system - BW DEV & target system - BW PROD as it conflicts previous setting.
Is only option that I need to manually maintain transformation from BW PROD datasource or there's another better alternative?

HI,
You are getting multiple IDOCs into BPM. But output you are getting one message right? IF so, your N:1 Mapping is not done correctly.
i.e your target message type should have occurence of 1..n and also the interface mapping. Closely obsever the N:1 mapping done in the BpmPatternCollectMerge.
Also go to SXMB_MONI->PE and check the Technical Details to make sure that, you are getting multiple IDOCs and you are executing the N:1 Transformation step correctly.
Also in the N:1 Mapping, check out the context you used. Make it root . Then test the mapping independently in the Integration Repository.
Hope it helps,
Regards,
Moorthy

Transformation issue in SOA 11g

I have a SOA application with a webservice that receive XML messages from third party and through a mediator and JMS adapter writes to a JMS topic. The XML messages gets validated against a XSD and using XSL is transformed to the target format. I want to retain the original XML message with no transformation, but with transformation the message has some added element. I am attaching the four files XSL, XSD and the XML file before and after transformation. I am using SOA 11g
XSL file_
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="../receiveESTA.wsdl"/>
<rootElement name="odsCad" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/ortdOdsCadEvent"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="../ProduceOrtdJms.wsdl"/>
<rootElement name="odsCad" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/ortdOdsCadEvent"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:xpath20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/jms/ORTDJMSDemo/receiveESTA/ProduceOrtdJms"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:tns="http://xmlns.oracle.com/sca/soapservice/ESTAProcessing/receiveESTA"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:inp1="http://xmlns.oracle.com/pcbpel/adapter/db/top/ortdOdsCadEvent"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl tns inp1 xsd wsdl ns0 plt xpath20 bpws mhdr oraext dvm hwf med ids xdk xref ora socket ldap">
<xsl:template match="/">
<inp1:odsCad>
<inp1:odsCadEvent>
<inp1:datasetname>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadEvent/inp1:datasetname"/>
</inp1:datasetname>
<inp1:messagesequence>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadEvent/inp1:messagesequence"/>
</inp1:messagesequence>
<inp1:eventid>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="/inp1:odsCad/inp1:odsCadEvent/inp1:eventid/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadEvent/inp1:eventid"/>
</inp1:eventid>
<inp1:eventrevisionno>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="/inp1:odsCad/inp1:odsCadEvent/inp1:eventrevisionno/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadEvent/inp1:eventrevisionno"/>
</inp1:eventrevisionno>
</inp1:odsCadEvent>
<inp1:odsCadAgency>
<inp1:datasetname>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:datasetname"/>
</inp1:datasetname>
<inp1:messagesequence>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:messagesequence"/>
</inp1:messagesequence>
<inp1:eventid>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:eventid/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:eventid"/>
</inp1:eventid>
<inp1:eventrevisionno>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:eventrevisionno/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:eventrevisionno"/>
</inp1:eventrevisionno>
<inp1:agencyeventnumber>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:agencyeventnumber/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:agencyeventnumber"/>
</inp1:agencyeventnumber>
<inp1:agencyeventnumberrevision>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:agencyeventnumberrevision/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="/inp1:odsCad/inp1:odsCadAgency/inp1:agencyeventnumberrevision"/>
</inp1:agencyeventnumberrevision>
</inp1:odsCadAgency>
</inp1:odsCad>
</xsl:template>
</xsl:stylesheet>
XSD*
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/ortdOdsCadEvent" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/ortdOdsCadEvent"
elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:complexType name="odsCadEvent">
<xs:sequence>
<xs:element name="datasetname" minOccurs="1" maxOccurs="1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="32"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="messagesequence" type="xs:decimal" minOccurs="1" maxOccurs="1"/>
<xs:element name="eventid" type="xs:int" minOccurs="0" nillable="true"/>
<xs:element name="eventrevisionno" type="xs:int" minOccurs="0" nillable="true"/>
</xs:sequence>
</xs:complexType>

<xs:complexType name="odsCadAgency">
<xs:sequence>
<xs:element name="datasetname" minOccurs="1" maxOccurs="1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="32"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="messagesequence" type="xs:decimal" minOccurs="1" maxOccurs="1"/>
<xs:element name="eventid" type="xs:int" minOccurs="0" nillable="true"/>
<xs:element name="eventrevisionno" type="xs:int" minOccurs="0" nillable="true"/>
<xs:element name="agencyeventnumber" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="12"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:element name="odsCad">
<xs:complexType>
<xs:choice minOccurs="1" maxOccurs="1">
<xs:element name="odsCadEvent" type="odsCadEvent" minOccurs="0" maxOccurs="1"
nillable="true" />
<xs:element name="odsCadAgency" type="odsCadAgency" minOccurs="0" maxOccurs="1"
nillable="true"/>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
XML file before transformation_
<message>
<properties>
<property name="tracking.compositeInstanceId" value="430009"/>
<property name="tracking.ecid" value="0000IWTcdiF9xWD_n9P5iZ1BZnIF000FGG"/>
<property name="transport.http.remoteAddress" value="10.103.50.20"/>
</properties>
<parts>
<part name="request">
<ns1:odsCad>
<ns1:odsCadEvent>
<ns1:datasetname>rest</ns1:datasetname>
<ns1:messagesequence>12</ns1:messagesequence>
</ns1:odsCadEvent>
</ns1:odsCad>
</part>
</parts>
</message>
XML File after transformation_
<message>
<properties>
<property name="tracking.compositeInstanceId" value="430009"/>
<property name="tracking.ecid" value="0000IWTcdiF9xWD_n9P5iZ1BZnIF000FGG"/>
<property name="transport.http.remoteAddress" value="10.103.50.20"/>
</properties>
<parts>
<part name="body">
<inp1:odsCad>
<inp1:odsCadEvent>
<inp1:datasetname>rest</inp1:datasetname>
<inp1:messagesequence>12</inp1:messagesequence>
<inp1:eventid xsi:nil=""/>
<inp1:eventrevisionno xsi:nil=""/>
</inp1:odsCadEvent>
<inp1:odsCadAgency>
<inp1:datasetname/>
<inp1:messagesequence/>
<inp1:eventid xsi:nil=""/>
<inp1:eventrevisionno xsi:nil=""/>
<inp1:agencyeventnumber xsi:nil=""/>
</inp1:odsCadAgency>
</inp1:odsCad>
</part>
</parts>
</message>
Any suggestion to how to get this sorted
Thanks

Morever I do not want the extra odsCadAgency element displayed in my transformed XML file. How do I resolve it.
Thanks

Transformation issue in BPM

I have a message type into which I am trying to send data in two different transformation steps in my BPM. The first transformation step does it fine and I am able to see the data. After that the flow completes the second one I don't see the data that I already have in it.
The second transformation step is nullifying the fields mapped by the first one even though I am not mapping anything into those fields in my second step.
Can some one help me with this? Is there some setting to retain the values in the message?

Hi Prasad,
are you using the same container variable for those two transformation steps as target? if not try creating a new one with the same message type a use it in the second transofrmation step
if this doesn't work create a new abstract interface message and use it in the BPM for the second mapping (I remember having some problems with using the same one too)
Regards,
michal

Transformation issue - Message no: RSTRAN517

Hello experts,
When trying to activate the Transformation for an InfoCube, I get the error message:
Rule (target field: ZD_REV1): No source unit assigned
Message no. RSTRAN517
Looking forward to your assistance in resolving this.
Thank you!

Ajeet,
Thak you very much. I am actually following exercise from this site at :
https://www.sdn.sap.com/irj/sdn/nw-bi?rid=/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
If you please look at page 19 where it goes over the creation of Transformation for InfoCubes, at the bottom of the page (step 5)...it states: "Fields UNIT and CURRENCY are automatically assigned". This threw me off!. In Step 5 also, it does not have UNIT and CURRENCY mapping instruction. But in reality it did not get mapped automatically when I tried to invoke?!
Can you please explain if I have minunderstood this or is the statement "Fields UNIT and CURRENCY are automatically assigned" misleading? This will help me understand things a little better
Thank you very much for your assistance. I really appreciate it!

Transformation issue: cx_rsrout_skip_value.

This line of code in my transformation:
raise exception type cx_rsrout_skip_value. "INS
is giving me this syntax error:
E:The type "CX_RSROUT_SKIP_VALUE" is unknown.
anybody got any suggestions?

Hi,
You might want to try using this "CX_RSROUT_SKIP_VAL "
raise exception type CX_RSROUT_SKIP_VAL
It worked for me.
let us know it worked or not..
null

Free Transform issue with CS4

So as I've been using CS4 of Photoshop, when I select something with the Lasso tool and use Free Transform to move it around, it automatically creates a copy of whatever I selected to move while the original thing is still in place. This happens randomly. Sometimes it does; sometimes it doesn't. Da hell, bro?

Lasso - Right Click - Free Transform
It didn't do it this time. I swear it's random

Transformation Issue

Similar Messages

Maybe you are looking for