Transformation - Routine with unit - How can I get CURRENCY = no unit ?

Hi gurus,
I have in a transformation a routine with unit. In this routine I am using an IF ELSE command. For ELSE I need something like CURRENCY = "show me no currency " . How do I do that?
Thanx in advance,
Ramona

Hi Selmer, Just writing 2 possible workarounds. Pls. let me know your comments;
1. @BEx Query: Currency keys can be sorted in the BEx reporting side in the Query Designer. You may restrict excluding those CURR-KEY !NotAssigned at the query levels to filter the values. If you are using Formula, you may use the data function NODIM() also as per the requirements; for example if you wish to ignore all currency keys.
2. @Routine Level: Guess your existing routine may be like: If ( Valid CURR-KEYs ) Then.. <Do Something>; Else if (No currency key) <Do Something else>. You may alternatively try modifying this using: if CURR-KEY is not initial/null Then <Do something>.

Similar Messages

HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

What version of iTunes are you running on your computer? You need to update to the current version.

Computer Crashed with CS4 - How can I get these programs to my new computer?

Computer Crashed with CS4 - How can I get these programs to my new computer?

You will want to install them from the installation media.

When I pre ordered midnight memories on itunes i didn't get the digital album with it. how can i get it?

When I pre ordered Midnight Memories on itunes I didn't get the digital album with it. How can I get it?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Google and yahoo maps do not work with safari - how can I get driving instructions on my Mac Pro? Thank you

I am unable to use yahoo or goggle maps with safari browser - anyone know a work around? Thank you

I use MapQuest.
There should, however, be a reason that you can't get Yahoo or Google maps to work.
Clinton

IPhoto opens with startup - how can I get it to stop?

Everytime I start my Powerbook, iPhoto opens. No problem with iPhoto 5. Since I loaded 6, can't get it to stop. I've looked at preferences, but not sure what is causing it. Any ideas??
Powerbook 15 in Mac OS X (10.4.4)

Try CTRL clicking (or right click) on the iPhoto dock icon and make sure "Open at Login" isn't checked.
Seeya...Q

DownloadHelper no longer shows with Firefox; how can I get its display back?

The add-on DownloadHelper normally would show up in the upper left corner of the Firefox opening page, in one of the bars _ I don't know a name for the bar. I have installed DownloadHelper but nothing is showing. How do I get it back?

First make sure DownloadHelper is really installed: go to Firefox menu "Tools" and check there is a "DownloadHelper" entry.
If so and you don't have the icon in the toolbar, click Firefox menu View/Toolbars/Customize. This opens the toolbar palette dialog. Locate the DownloadHelper icon and drag it back to the desired location in the toolbar.

HT1212 havent us ed ipod for a while forgot password now says disabled will not let me do anything with it how can i get pass this to use again

how do i try and get in my ipod when its saying ipod is disabled

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Bluetooth connection with jsr082 How can I get paired device list on phone?

Hi all,
Please anyone, who uses jsr082, help me.
First if i tried to get cashed or preknown device lists with function
discoveryAgent.retrieveDevices(DiscoveryAgent.CASHED);
or
discoveruAgent.retrieveDevices(DiscoveryAgent.PREKNOWN);
on a real phone(Nokia 7610) this functions return null, but I have paired devices (and one of them are active when I tried this app)on my phone.
Can you tell me it is a certification problem or what?
thank you.
Message was edited by:
vahear
Message was edited by:
vahear

I don't think Siri support for auto Bluetooth is official yet. It sort works in mine, a Fiat 500, but I have to use the home button on my iPhone to enable Siri, the voice command button on my steering wheel doesn't do it. I would say keep checking the Siri/iPhone page on apple.com for info on when auto kits will be supported.

I just replaced my ipod touch 2nd gen with another how can i get my itunes back

i just replaced my ipod touch 2nd gen with the same model and cant seem to get my iyunes back

Don't understand question, Changing iPod shouldn't affect iTunes on the computer you sync with. Plug in new iPod, it should take you through some screens of options asking how you want to setup the new iPod.
Just did this when going from 7+ year old iPod video to iPod Touch 5th gen.

I have lost my autologin facility with firfox4 how can I get it back?

I had a autologin facility with Norton. I thought it wuld eb wise to downlaod version4. My autologin in no longer shows-it would autofill in passwords once i logged in. Now I have to go into Norton to retrieve these and it is taking so much time. what can i do. I do not like the retreive last log on particularly either. can one revert back to the earlier firefox?

F you set up find my ipod on the ipod itself BEFORE it was stolen AND it is on AND it is connected to wi-fi AND it has not been restored by the thief, then you may be able to get an approximate street address.
Otherwise, it cannot be tracked.
Report it to the police and change your passwords.

I need to install 3.6 Firefox to work with SiteBuilder, how can I get a Download for MAC?

Please send me a link to download the MAC 3.6 version of Firefox. Register.com told me it is the only way to solve a compatibility issue with their ancient SiteBuilder software. I'm stuck until I get it. Thank you

Here [http://ftp://ftp.mozilla.org/pub/firefox/releases/3.6/mac/ Mozilla releases] you can download firefox 3.6. The setup is in your language folder. Before you install this version i must tell you that is dangerous to install a old version of firefox for your security when you surf the net.

HT204088 I have reset mt iPad3 and lost my iBooks, books it keeps coming up with error how can I get them back without paying again

Help anyone please

Welcome to the Apple Community.
Try deleting the problematic book (electing to remove original file if/when prompted) and then re-downloading the file from the iBook store.
You can re-download content purchased from the iBook store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iBook store (availability varies depending on location) using the purchased option at the bottom of the screen after you tap the store button in the top corner of the iBook app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

My computer crashed.took my library with it,how can i get it back?

my laptop has already been restored, but the technicion couldnt find my itunes library anywhere.is it gone for good? im scared to plug in my ipod because last time it erased everything on it. i have a nano and touch .

It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Use this to put everything back.
The music sync is one way -computer to ipod. The exception is itunes music.

How can i get currency values from flatfile to function module

Dear All,
           I have to take currency values from flat file and i have to assign those flat file value to function module .
Eg: "Convert_to_local_currency". I need technical code how to calculate those amount in work area and how to assign those amount value function module.
          I need sample program for currency conversion from flat file to function module. My requirement is based on flat file amount i have to calculate in work area and assign those work area to function module.
With Regards,
Baskaran

Hi Satish or Baskaran,
First conform in which format the flat file is present, as abhi mentioned if it is there in notepad
try to use F.M GUI_UPLOAD as shown below...
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Desktop\rpf1.TXT'
TABLES
DATA_TAB = ITAB.
Now loop at ITAB Into Work_area and press the respect currency fields which you want and in the same way
if the file is in EXCEL format use F.M ALSM_EXCEL_TO_INTERNAL_TABLE
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename = P_FNAME
      i_begin_col = 1
      i_begin_row = 1
    TABLES
      intern = ITAB
LOOP AT ITAB INTO WA.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
        EXPORTING
          foreign_currency = wa-waers
          local_currency   = wa-waers
           IMPORTING
          local_amount     = tvals-gross.
    ENDIF.
endloop.
And as mentioned loop the records into work area and process the currenct field which is present in the
ITAB according to its field name. And make sure within the loop you call your function module.
Regards
VEnk@
Edited by: Venkat Reddy on Dec 9, 2009 5:51 PM

Transformation - Routine with unit - How can I get CURRENCY = no unit ?

Similar Messages

Maybe you are looking for