Transformer une video en fichiers images
Bonjour,
Je vous explique ma problématique :
Actuellement je lis plusieurs fichiers images successivement et après un traitement de l'image je trouve les coordonnées du centre d'un objet. j'ai actuellement 15 fichiers image et me retrouve ensuite avec un tableau m'indiquant les 15 coordonnées x/y du centre de mon objet.
J'aimerais maintenant faire la même chose mais à partir d'une vidéo.(avi), par conséquent je dois transformer ma video en plusieurs images.
Par conséquent est-il possible de découper une vidéo image par image (ou plutôt tout les x seconde, car je crois que le format avi est un "encapsulage") et de stocker chaque image dans un répertoire avec a chaque fois un nom différent ? Je précise que ce découpage doit etre assez rapide : toutes les 20ms. (d'ailleurs y a t-il une limite ?)
Est-il plus simple de brancher directement une caméra sur le port usb et de prendre en direct la vidéo (ou les images toutes les 20ms) ?
Si une de ces solutions est envisageable, pourriez vous me guider un peu quant à sa réalisation ?
Merci par avance pour vos réponses.
Je me permets de reposter sur ce sujet car...
je recois une video dans un répertoire en .avi que je transforme en une succesion d'image que je lis avec un vi utilisant le module vision.
Pas de problème, cela marche relativement bien.
MAIS, on vient de m'annoncer que cette video sera sans doute au format mp4, du coup il me semble que mon vi ne focntionne plus car le module vision ne lis pas les mp4.
J'ai cherché un peu, il semble que l'on peu utiliser VLC et des active'X pour lire une vidéo mp4, mais pourra t-on alors décomposer cette vidéo en images ?
Je pourrais aussi convertir la video .mp4 et .avi mais il faut que ce traitement se fasse automatiquement, et je suis pas sur que ce soit plus simple...
Qu'en pensez vous ? avez vous des pistes de travail ?
Similar Messages
-
comment dessiner des points en live selon des coordonnées xy d'un fichier TXT par dessus une video obtenue via une webcam ?
naj ai trouvé
na -
Transformer une palette en nuancier
Pour travailler sur une image en mode "couleurs indexées" sans modifier la table des couleurs, il faudrait pouvoir transformer la table des couleurs ou "palette" en nuancier.
Comment faire , (à part tranférer les 256 couleurs une à une de la table des couleurs vers le nuancier = fastidieux)
Plus précisément, lorsqu'on affiche la "table de couleurs" (menu Image >Mode >Table des couleurs) on ne peut plus travailler avec l'outil pipette, et donc sélectionner une couleur de la table comme couleur de premier plan. L'outil pinceau est également inactif.pour travailler sur l'image il faut fermer la table des couleurs et on se retrouve bien avancé
La seule chose qu'il soit possible de faire c'est de cliquer sur une couleur de la palette , ce qui ouvre le menu sélection des couleurs ce qui permet de transférer la couleur dans le nuancier....
Merci de votre réponse
(sujet déjà posté sur le forum international)Bonjour!
Pour transformer une palette en nuancier: lorsque vous convertissez la photo en couleurs indexées:
menu Image » mode » Table des couleurs… cliquez sur le bouton Enregistrer. vous pouvez enregistrer ce fichier dans vos documents.
Puis dans la palette nuancier, coin supérieur droit, Charger un nuancier … allez choisir le fichier en question.
Voilà!
;o-) -
Comment mettre une video sur ipod
comment mettre une video du imac au ipod?
Bonjour,
Quelle version de LabVIEW tu utilises ?
SI tu as une version récente, et que tu as la palette Silver (ou argent en français), tu peux partir d'un de ces boutons qui possèdent une image dessus. Tu suis la procédure proposée par Kaleck0 mais au lieu de remplacer le bouton en lui-même, tu le fait sur l'image utilisée dans le bouton silver.
Tu devrais obtenir le résultat souhaité, c'est à dire une image qui est comprise dans le bouton mais qui n'est pas le bouton.
Par contre, je ne crois pas qu'on puisse avoir une image différente en fonction de l'état du bouton.
.mesLeft{float:left} .mesInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898} .mesLogo{float:right;opacity:0.18} .mesLogo:hover{opacity:0.9}
Maxime R.
CLD - Certified LabVIEW Developer / Développeur LabVIEW Certifié
CLAD - Certified LabVIEW Associate Developer -
Exporter une video via ma carte graphique et non mon cpu
Bonjour, lorsque je fait une video via premiere pro cc et after effect cc. lors de l'export de la video, que se soit via premiere pro ou media encoder, mon processeur (i7 4770k) se met à tournet à 100% et ma carte graphique qui est pourtant supporter par le logiciel et avec le dernier driver (GTX 770) ne tourne qu'a 1 ou 2%, j'ai pourtant selectioner "aceleration GPU mercury....(Cuda)".
Le problème est que malgré la puissance de mon processeur, il est dépasser et je suis à 16h pour exporter une video de 2min en non HD...
Merci à vous,
GillesBonjour Gilles,
Je suis très occupé mais le sujet m'intéresse car j'ai eu moi même autre fois beaucoup de problèmes de ce type. L'utilisation du CPU et de la carte graphique est décrite dans l'aide des logiciels.
Je ne suis pas spécialiste, j'ai cependant vérifié et sur ma machine, qui n'est pas très éloignée de la tienne je ne rencontre aucun problème en effectuant un rendu à partir de Première ajoutée à la queue Media Encoder. Une vidéo d'environ 15 sec 1080P rendue en 720 p ne prend que quelques sec. Effectivement, c'est Le CPU qui est sollicité.
La même à laquelle j'ai ajouté un adobe dynamik link 720p classique avec 8 sec d'animation texte et image, prend à peine un peu plus de temps (même sans rendu mémoire préalable du link) et la carte graphique est sollicitée un peu en plus du CPU.
Première et AE sont restés ouverts pendant le rendu.
Je te donne ma config pour que tu la compares à la tienne.
Premiere :
- Réglage du projet /Système de Rendu : Accélération GPU Playback Engine
- Préférences / mémoire : 32 installées dont 26 partagées par les applications Adobe (6 pour les autres)
- Préférences /Optimiser le rendu pour : Performances.
AE (3D classique)
- Préférences / Mémoire et multitraitement : idem à Premiere
- Préférences / Mémoire et multitraitement / Multitraitement AE : Pas de rendu simultané....
- Préférences / Cache de média et de disque : 100 GO sur un disque différent de celui des logiciels (le rendu est sauvé sur un 3e disque)
Tu peux commencer par purger toute la mémoire et le cache disque dans AE avant de lacer le rendu.
Je ne sais pas si cela va t'aider mais tu peux au moins comparer et voir si tes paramèrtres sont différents -
Pourquoi les hyperliens réalisés dans Edge animate (action sur une image>clic>lien>url) ne fonctionnent plus dans Muse, une fois le fichier Edge .oam importé dans Muse ?
(Dans Muse, l’animation se joue, mais les hyperliens réalisés dans Edge ne fonctionnent plus, alors qu’il fonctionnaient dans l’aperçu du navigateur de Edge.).
Y’a t-il une solution ? Merci aux bonnes volontés.Thanks very much Vivek for your help. wahou ! It’s work. great !
Un grand merci.
Le 16 févr. 2015 à 13:49, VivekPassan <[email protected]> a écrit :
Pourquoi les hyperliens réalisés dans Edge animate ne fonctionnent plus dans Muse, une fois le fichier Edge .oam importé dans Muse ?
created by VivekPassan <https://forums.adobe.com/people/VivekPassan> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7198771#7198771>
Hello,
I believe you are facing the similar issue as mentioned in the thread below. I am sure suggestions there will help you overcome the problem.
I created a interactive navigation in edge animate and imported that in muse. The animations works fine, but the interactivity doesn’t work. ((for example if I click on the "home-Button", that site doesn’t open in my browser as it should be), Does anyone <https://forums.adobe.com/thread/1547404>
Regards
Vivek
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7198771#7198771 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7198771#7198771
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>. -
J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL sur une des images (action > clic > lien). Tout marche parfaitement dans Edge animate.
Une fois le fichier .oam (généré par Edge) importé dans Muse, l'animation se joue bien mais les hyperliens réalisés dans Edge animate ne fonctionnent plus, lorsque que je prévisualise la page Muse ou le site dans n'importe quel navigateur.
Y'a t il une solutions pour que les hyperliens qui fonctionnaient dans edge animate se jouent une fois le .oam importé dans Muse ? Merci à toutes les bonnes volontés qui peuvent résoudre ce problèmeJ'ai réalisé une petite animation dans Edge animate avec un lien vers un URL sur une des images (action > clic > lien). Tout marche parfaitement dans Edge animate.
Une fois le fichier .oam (généré par Edge) importé dans Muse, l'animation se joue bien mais les hyperliens réalisés dans Edge animate ne fonctionnent plus, lorsque que je prévisualise la page Muse ou le site dans n'importe quel navigateur.
Y'a t il une solutions pour que les hyperliens qui fonctionnaient dans edge animate se jouent une fois le .oam importé dans Muse ? Merci à toutes les bonnes volontés qui peuvent résoudre ce problème -
How can we transform a video from progressive to interlaced with final cut?
How can we transform a video from progressive (720x1080 50p) to interlaced (PAL) with final cut pro???????
The video is taken with Sony EX3Hi Nick
Sorry but your first link says +"The file you are trying to access is temporarily unavailable."+ ... but tell me, are you viewing these interlaced encodes yourself on an interlaced monitor (eg are you burning them to disc and viewing on a TV) as they are meant to be seen, or are you just playing them back from file on your (progressive) computer display?
By the way, I did manage to download your source file and encoded it here. Looks ok to me ... in a addition to the instruction above, I also changed the Field Dominance in the Encoder > Video Format tab to Top First (it defaulted to progressive due to the progressive source file).
Let me know if that helps
Andy -
Display a video stream (successives images)
Hello!
Thanks for looking after my post.
I try to display a video stream (successives images) in Java component.
With a simple swing component, it's not possible to display 25 fps for a 640x480 resolution.
With SWT, we arrive to display about 15 fps for a resolution 640x480 but the use of the CPU is very important.
Do you know an efficient system to display video stream?
Thanks.Firstly if you're loading images with Toolkit you'll nbeed to use MediaTracker (see the Javadoc for full and clear instructions).
Secondly, be aware of how long it takes to load image data, allocate the memory for it, and decode it. This is where you're going to suffer and it's the fundamental flaw in the plan of simulating video by flipping single frames: it's highly unlikely you'll manage it quickly enough. As above, 50ms is quite optimistic.
You could do your loading up-front and buffer a load of images - there are a few strategies you could use for this. But bear in mind that (a) this is going to be very memory hungry, and (b) if your image load time is greater than your frame display time you're always going to be fighting a losing battle. But it should work for very small animations.
Run yourself some tests: write yourself a simple test class which just loads an image in its main() method using a MediaTracker. It'll tell you how long loading the image takes. Of course, if you're doing it in an applet then you've got all sorts of other factors to consider and the load times will be high. -
OPENING VIDEO I LOSE IMAGES THAT DON'T SHOW
GREETINGS, I COMPLETED A RECENT PRODUCTION.
BUT WHEN I OPEN THAT FILE IN ELEMENTS PREMIERE
THE IMAGES I INSERTED INTO PRODUCTION ARE NOT DISPLAYING.
WHERE MIGHT THEY BE? WHILE IN PRODUCTION THEY WERE DISPLAYING IN MY
PROJECT ASSETS, EASY TO UPLOAD INTO MY PRODUCTION.
I'M FINISHING PRODUCTION BUT I DO NOT SEE THE IMAGES ALREADY IN
PROJECT ASSETS.
HOW CAN I GET THEM TO DISPLAY, SO THAT I CAN MOVE FORWARD IN PRODUCTION.
THANKS, RASrastaman
What version of Premiere Elements and on what computer operating system is it running?
For now I will assume Premiere Elements 13 on Windows 7, 8, or 8.1 64 bit.
1. Go to and open Project Assets palette. Look to the top left of Project Assets and see three icons.
From left to right, they are Show Hide Video, Show Hide Image, and Show Audio. Please assure that all 3 are in the Show mode.
2. Since your opened project apparently has no assets, please check the name of the opened project to assure that you have not somehow overwritten the project that you are looking for and have opened a new project.
3. If you have worked with the AutoSave On during the creation of the project, go to the Adobe Premiere Elements AutoSave Folder and
determine if you can find an AutoSave file which will have most of the content of the missing project. In Windows 7, 8, or 8.1 64 bit, the default location
of that Adobe Premiere Elements AutoSaves Folder is
Libraries
Documents
Adobe
Premiere Elements
13.0 , if you are working with 13
and in the 13.0 Folder is the Adobe Premiere Elements AutoSave Folder which has the AutoSave files.
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Can PS CC 2014, export a video clip as image sequence?
Can PS CC 2014, export a video clip as image sequence?
I am trying to get a short video clip already in PS, into an image stack for stacking>
I dont think PS will stack a smart obj that is a video. So, can PS save out the frames as JPG etc so I can reopen and then stack?
I dont have the space on my HD for Premiere or AE.
Thanks
MaxiYes it can.
Mylenium -
Can't see any imported video or still images in canvas
Hi,
I'm a new Motion 4 user. No matter what video or still images I import into a project, my canvas remains black. I am, however, able to see a wireframe outline of where the video / picture should be situated on the canvas. I am also able to hear audio in the timeline. I can also preview the picture when the file is selected in the browser. However, when I look at the project and see the file's I've important, the little preview window is empty, with the checkerboard background, as if it doesn't recognize the picture. I have checked to make sure I'm viewing RGB, instead of Alpha, and I've also trashed the pref and cache files. I'm running an external 23 inch cinema display but I've also disabled that to no avail. No matter what I import I'm simply looking at a black canvas.
I've searched around the threads quite a bit but haven't found a solution yet. Any help would be greatly appreciated!!
Sincerely,
StewartYou could have a bad install. There's a thread/threads around here talking about the viewer being all white due to a bad install of the program or a corrupt user. I've also heard it manifest with a black screen instead of white.
Quickest thing to check. Create a new user account. Log in there, and open Motion. If Motion opens fine, then you have a problem with your normal user account.
Andy -
Hi,
I can not open any file because of this error :
"impossible d'importer le presse-papiers en raison d'une fin de fichier inattendue"
litteraly I suppose:
"impossible to import the clipboard because an unexpected end of file"
at the launch of Photoshop CS6 .
The [file/new] box doesn't open up.
The [file/open] box open up, but I can't open any file.
No log,
no other error.
Does someone know what's wrong with it ?
ThanksPlease read these and proceed accordingly:
http://forums.adobe.com/docs/DOC-2325
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Maybe start with restoring the Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved. -
How Can We make video files of images in Flex
Hi
Can Any body tell me how can i make a video file of images in flex.Please tell me wether its possible in Flex. to combine images to make a video file.
Regards
Vineet oshoOk,
Let me take this example.
Supposing A vendor with 3 AP open items, B vendor with 2 AP open items.
When making a payment proposal, SAP shows only 2 lines, namely, collected by vendor code.
Looking at DME file, however, it shows 5 lines which means all individual open items.
What we want to make is 2 lines in DME file, which means grouping invoices by vendor in a DME file.
Hope it makse sense. -
Cp6 TOC - video size and image border
Hi,
There seems to be a number of changes to the TOC in cp6 32 bit. Can anyone confirm whether they are having the same issues ?
a/ The video space size is now 4 pixels narrower. It was 196 by 144
http://forums.adobe.com/thread/830658
and it now appears to be 192 * 144 according to the help. . We want to know whether this is right as it means we have re-encode videos.
b/ images now have a border when placed in the TOC. We have a logo with a white background on a white stage so it stand out. There doesn't seem to be an option to turn borders off
rgds PaulHi,
The video space size and the border has definitely in 5.5 was also 196.
Can you confirm the height as well
Could you advise the border on the images in TOC information as this makes adobae captivate causes look poor as Borderless images are the norm in graphic design.
1. video size
The published size is 192 in 5.5 and 6
It used to squash it in 5.5, but it now gives an error message and then squashes it
In 5.5 in section non interactive objects and media - > using slide video -> best practices to use slide video effectively it is listed as
"Video dimensions:
Ensure that the video object dimension is the same as that of the original video for optimal quality.
Do not change the aspect ratio of the video even if you cannot maintain equal dimensions for the video object and original video. Otherwise, the video loses quality.
Keep the dimensions of a video that you want to include in the TOC as: Height 144 and Width 196."
In 6 you get an error message saying it should be 192 * 144
This blog also gives the same number
http://captaincaptivate.com/?p=550
These forum answers also give the same answer
http://forums.adobe.com/message/3579313#3579313
http://forums.adobe.com/message/4065836#4065836
This adobe seminar by Dr Singh also gave the same answer according to my notes ( but its been deleted)
http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775531&loc=en_us
order when placed in the TOC. We have a logo with a white background on a white stage so it stand out. There doesn't seem to be an option to turn borders off
2. border around image in the TOC
We have tried in the old version. None of them had a border around the image in the TOC in 5.5
rgds Paul
Maybe you are looking for
-
NullPointerException at com.sun.scenario.effect
Hi to all I meet this exception in my app. At the screen it seems like lost links to my graphics(no rendering some nodes) Are there some one to meet that exception too? java.lang.NullPointerException at com.sun.scenario.effect.impl.prism.ps.P
-
I have a Macbook Air 13" which i bought new a week ago. I find it terribly slow, especially when using the internet. I also have an Imac which is using the same connection and is not slow. Is there a setting or something that needs to be changed
-
Changing display of charachteristic based on a condition
Hi all, i have a particular requirement for diplaying the material infobject in a query output. The user wants the display of the material based on what the material is. If the Material = A, then it shoud be displayed as "XXXX" and if Material = B it
-
exception trace is comming, while running the project in weblogic, in the project iam using jms queue, i configured the jms server and jms module and connection factory but it is showing these exception [The selected operation process could not be in
-
Who can write Solaris video driver for Intel 810?
We have a customer who wants to use a Flex/ATX mother board with the Solaris OS. The Flex/ATX mother boards us the Intel 810/810E chip set and we have not been able to find a Solaris video driver for that chip set. Does anyone know if such a driver e