Transforming Micro MV to DV
Is there a way to transform Sony's Micro MV format to DV format? I tried using a Sony FX1 but it didn't work. Can DSR-11 do the job? My cousin borrowed my DSR-11...
Sounds like the DV recorder is actually recording DVCAM, which will give you 40minutes on a 60minute tape. You'll have to check the settings on the deck or camera and set it to DV, not DVCAM.
Graeme
Similar Messages
-
Comment transformer micro sim en nano sim?
Comment transformer micro sim en nano sim?
Hey Kay,Yes you can keep the same number when tranfering different size SIMS. Its normally an easy process of popping into a Telstra store (with the appropriate ID) and request the size you want. It's also normally a free and they'll actives the sim for you there and then. I say this as I've replaced a few sims in my time and it's always been a breeze. Telstra Store Locations
-
Hello,
I'm trying to put an Archlinux on the Asus Transformer book T200TA, and I will share here my progress. I will take note of a lot of things, when I manage to do something or when something does not work. And if you have any ideas to make something works, tell me !
Current status (for TL;DR)
- Boot under archiso : Working with patch
- Boot Archlinux on the keyboard's HDD : Working by putting boot and efi partition on the internal memory
- Virtualization of Windows 8.1 under linux : Partially working only with a 64 bit linux as host
- SD card : Working with patch
- Graphics : Working
- Random freezes : Fixed ?. Didn't experienced any since my new installation with linux 4.0
- xhci_hcd bug at boot ; Work in USB2 mode only
- Backlight control : Working
- Sound : Work on both headphone and speakers in stereo but you have to edit an alsa config file for enabling sound on one or both output and for setting the sound level. Microphone not tested.
- Wifi : Not working
- Bluetooth : Not working: Not working
- Battery indicator : Working With kernell patch
- Touchpad : Partially working : Only one finger and very unpleasant because the cursor move a little before you click.
- Touchscreen : Partially working : Works randomly and seems to not release click when you remove your finger.
Sources
The T200TA has a lot on common with the T100TA, so, much of my fixes come from this computer (as it has been release one year before and the T200 is currently pretty new).
- http://www.jfwhome.com/2014/03/07/perfe … book-t100/
- https://github.com/AdamWill/baytrail-m
- https://bbs.archlinux.org/viewtopic.php?id=179948
Boot under archiso
If you try to boot, it will not work. Because, as T100, it search only for 32bit efi (even if the cpu can handle 64bit OS). You can do like him.
Or you can do like me, I think it's easier, but really dirty (it's not a full script, execute it only part by part) :
## Create working directory
mkdir work
cd work
## Build grub and get missing bootloader files bootia32.efi
git clone git://git.savannah.gnu.org/grub.git
cd grub
./autogen.sh
export EFI_ARCH=i386
./configure --with-platform=efi --target=${EFI_ARCH} --program-prefix=""
make
cd grub-core
../grub-mkimage -d . -o bootia32.efi -O i386-efi -p /boot/grub ntfs hfs appleldr boot cat efi_gop efi_uga elf fat hfsplus iso9660 linux keylayouts memdisk minicmd part_apple ext2 extcmd xfs xnu part_bsd part_gpt search search_fs_file chain btrfs loadbios loadenv lvm minix minix2 reiserfs memrw mmap msdospart scsi loopback normal configfile gzio all_video efi_gop efi_uga gfxterm gettext echo boot chain eval
cp bootia32.efi ../../bootia32.efi
cd ../../
rm -r grub
##Get all file from the current archlinux install iso
#Search and replace all XXXX.XX.XX by the current release date and /dev/sdX by your usb key address. If you find a way to extract both partion from iso without dd, it should be faster than that, so tell me if you know how to do that.
dd bs=4M if="archlinux-XXXX.XX.XX-dual.iso" of=/dev/sdX
mkdir usb
mkdir newiso
# Unplug and replug your usb key and wait a little if mount doens't work :
mount /dev/sdX2 ./usb
cp -r usb/* newiso/
sync
umount usb
mount /dev/sdX1 ./usb
cp -r usb/* newiso/
sync
umount usb
rmdir usb
## Prepare new usb key content
mv bootia32.efi newiso/EFI/boot/
mkdir -p newiso/boot/grub
echo "
menuentry 'Arch Linux i686'{
echo 'Loading Linux core repo kernel ...'
linux /arch/boot/i686/vmlinuz nomodeset archisobasedir=arch archisolabel=ARCHISO
echo 'Loading initial ramdisk ...'
initrd /arch/boot/i686/archiso.img
menuentry 'Arch Linux x86_64'{
echo 'Loading Linux core repo kernel ...'
linux /arch/boot/x86_64/vmlinuz nomodeset archisobasedir=arch archisolabel=ARCHISO
echo 'Loading initial ramdisk ...'
initrd /arch/boot/x86_64/archiso.img
}" > newiso/boot/grub/grub.cfg
## Prepare the usb key partition
gdisk /dev/sdX
3 # Create blank GPT
o # Create a new empty GPT
y # Proceed
n # New partition
# Default partition number
# Default first sector
# Default last sector
EF00 # Bootable efi partition
c # change partion's name
ARCHISO
w # Write modifications on the disk
Y # Proceed
mkfs.fat -F 32 /dev/sdX1
echo mtools_skip_check=1 >> ~/.mtoolsrc
mlabel -i /dev/sdX1 -s ::ARCHISO
rm ~/.mtoolsrc
## Copy files to the usb key
mkdir usb
mount /dev/sdX1 usb
cp -r newiso/* usb/
sync
umount usb
rmdir usb
## Cleaning
cd ../
rm -r work
A better way of fixing that should be building a x86 version of the file `PreLoader` from the repo `git://git.kernel.org/pub/scm/linux/kernel/git/jejb/efitools.git` because this file is renamed as `bootx64.efi` during the archiso creation, and the missing file is the x86 equivalent : `bootia32.efi`. Anyway, I didn't manage to build it, so I gave up this path. Tell me if you find something better.
Boot Archlinux on the keyboard's HDD
I cannot currently use this computer under linux for everyday, but I need a linux to work or dev. And I have to admit that the windows UI is much better for touchscreen than any linux desktop that I tried. The internal memory is only 30GB. So I let Windows 8.1 on internal memory for "tablet mode" and linux on hard drive for "netbook mode".
I didn't find any way to make the computer boot to the hard drive (or the micro usb card of 64GB), the efi-bios don't see them (the HDD is pluged in usb 3.0, but even in USB 2.0 mode it does the same).
To make it work, you have to put the boot and efi partition on the internal memory :
- Create a boot parition (100mo ext2) on the internal memory or use the windows rescue partition (300mo, ntfs, ~86%used after grub and vmlinuz installation). And during your installation process, mount it at /boot (/dev/mmcblkpX)
- Use the windows EFI parition (100mo fat32) and mount it to /boot/efi (/dev/mmcblkpY)
- Then (re-)install linux (need internet connexion, wireless or no. Dont forget to start dhcpcd)
mount /dev/sdbZ /mnt # with /dev/sdbZ your keyboard's hdd root partition where linux will be installed
mkdir /mnt/boot
mount /dev/mmcblkpX /mnt/boot
mkdir /mnt/boot/efi
mount /dev/mmcblkpY /mnt/boot/efi
pacstrap /mnt/ base grub efibootmgr
genfstab -U -p /mnt >> /mnt/etc/fstab
- and install grub on partition
arch-chroot /mnt
grub-install --target=i386-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck
- Edit /etc/grub.d/40_custom and add at the end :
if [ "${grub_platform}" == "efi" ]; then
menuentry "Microsoft Windows Vista/7/8/8.1 UEFI-GPT" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid --set=root --hint-bios=hd0,gptY --hint-efi=hd0,gptY --hint-baremetal=ahci0,gptY [fs_uuid]
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
fi
with gptY, the Y from /dev/mmcblkpY above (the efi partition)
and [hints_string] is gave by the command
grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
- Apply grub config
grub-mkconfig -o /boot/grub/grub.cfg
Now I can boot to "Windows Boot Manager" or "grub" from bios. But I choosed to have grub by default and then he ask me what I want.
Virtualization
What works :
- host Win32, guest linux32
- host win32, guest win32
- host linux32, guest linux32
- host linux64, guest win
What doesn't work:
- host linux32, guest win32
Windows 8.1 guest : With QEMU and Virtualbox, same problem during installation (or boot when already installed) we got a
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x0000000A
Parameters:
0xFFFFFFE6
0x0000001F
0x00000000
0x8192BFAB
After 3min virtualbox said that a critical error happend and tell us to watch the log. But it seem useless because the bug happend after 7 seconds and nothing show up after 7 seconds.
SD Card
http://www.jfwhome.com/2014/03/07/perfect-ubuntu-or-other-linux-on-the-asus-transformer-book-t100/ wrote:
The SD card reader works with newer kernels, but the sdhci module needs some configuration. Create a new file:
sudo nano /etc/modprobe.d/sdhci.conf
Then add the following:
options sdhci debug_quirks=0x8000
ctrl-o then ctrl-x to save and exit, then:
sudo mkinitcpio -p linux
Graphics
2D and 3D accelerations are enabled with xf86-video-intel 2.99.917 and mesa 10.4 :
$ glxinfo | grep direct :(
direct rendering: Yes
GL_ARB_draw_elements_base_vertex, GL_ARB_draw_indirect,
GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multi_draw_indirect,
$ glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Bay Trail x86/MMX/SSE2
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.4.0
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.4.0
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.4.0
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
However firefox doens't enable 3D acceleration by default, you have to force it. To check if it use it, go to about:support
And this mean that, it doesn't support it :
GPU Accelerated Windows 0/1 Basic
To force it :
- Got to about:config
- Set layers.acceleration.force-enabled
- Set layers.offmainthreadcomposition.enabled to true
And restart firefox. Now you should have
GPU Accelerated Windows 1/1 OpenGL (OMTC)
Warning : 3D acceleration can make firefox more buggy, so try to disable it if you have problems.
source : http://askubuntu.com/questions/491750/f … in-firefox
Random freezes
After some minutes (last time after ~40minutes) the system freeze. I don't know if it's only graphical or not. This freeze seem to happend when the cpu/gpu has a lot to do.
I've done a clean install with default kernel 4.0 in may 2015, and since that, I didn't have any freeze.
xhci_hcd bug at boot
When I enable XHCI in bios, sometime, I get that
xhci_hcd 0000:00:14.0: Error while assigning device slot ID
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
usb usb1-port3: couldn't allocate usb_device
The port change randomly and when it is port3, I loose the keybard and mouse and I have to make a hard reebot.
To "fix" this, I disabled XHCI (wich mean USB3) from the bios.
Still happen with kernel 4.0
Sound
With the work of sid789. I manage to make sound work on Linux 4.0.
Save this file somewhere on your computer : asound.state
state.bytrt5640 {
#### General
# Level
control.1 {
iface MIXER
name 'DAC1 Playback Volume'
value.0 175 # Left volume
value.1 175 # right volume
comment {
access 'read write'
type INTEGER
count 2
range '0 - 175'
dbmin -65625
dbmax 0
dbvalue.0 0
dbvalue.1 0
# Disable both output Right
control.51 {
iface MIXER
name 'Stereo DAC MIXR DAC R1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable both Left speaker
control.54 {
iface MIXER
name 'Stereo DAC MIXL DAC L1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Channel to listen
control.21 {
iface MIXER
name 'DAC IF1 Data Switch'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Normal
item.1 Swap
item.2 'left copy to right'
item.3 'right copy to left'
# Enable
# Only 0 and 2 works
control.100 {
iface MIXER
name 'DAI select'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '1:1|2:2'
item.1 '1:2|2:1'
item.2 '1:1|2:1'
item.3 '1:2|2:2'
##### Speaker #####
#Enable
control.27 {
iface MIXER
name 'Speaker Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
#Change a little the volume..
control.19 {
iface MIXER
name 'Class D SPK Ratio Control'
value 10
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '1.66x'
item.1 '1.83x'
item.2 '1.94x'
item.3 '2x'
item.4 '2.11x'
item.5 '2.22x'
item.6 '2.33x'
item.7 '2.44x'
item.8 '2.55x'
item.9 '2.66x'
item.10 '2.77x'
# Enable Left speaker
control.62 {
iface MIXER
name 'Speaker L Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right speaker
control.61 {
iface MIXER
name 'Speaker R Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right channel on right speaker
control.67 {
iface MIXER
name 'SPOR MIX DAC R1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right channel on left speaker
control.70 {
iface MIXER
name 'SPOL MIX DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
# Enable left channel
control.71 {
iface MIXER
name 'SPOL MIX DAC L1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
##### headphone #####
# Enable
control.24 {
iface MIXER
name 'Headphone Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
#Enable too
control.34 {
iface MIXER
name 'HPO MIX DAC1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable Left
control.98 {
iface MIXER
name 'DAC MIXL INF1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable Right
control.96 {
iface MIXER
name 'DAC MIXR INF1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right
control.59 {
iface MIXER
name 'HP R Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable Left
control.60 {
iface MIXER
name 'HP L Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Don't know what, but change something on headphone
control.58 {
iface MIXER
name 'DAC L2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 IF2
item.1 'Base L/R'
## Useless on output
control.2 {
iface MIXER
name 'Mono Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.11 {
iface MIXER
name 'Mono DAC Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 175'
dbmin -65625
dbmax 0
dbvalue.0 -1500
dbvalue.1 -1500
control.3 {
iface MIXER
name 'Speaker Channel Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.4 {
iface MIXER
name 'Speaker Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 39'
dbmin -4650
dbmax 1200
dbvalue.0 -900
dbvalue.1 -900
control.5 {
iface MIXER
name 'HP Channel Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'HP Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 39'
dbmin -4650
dbmax 1200
dbvalue.0 1200
dbvalue.1 1200
control.7 {
iface MIXER
name 'OUT Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.8 {
iface MIXER
name 'OUT Channel Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.9 {
iface MIXER
name 'OUT Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 39'
dbmin -4650
dbmax 1200
dbvalue.0 -1950
dbvalue.1 -1950
control.10 {
iface MIXER
name 'DAC2 Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.12 {
iface MIXER
name 'IN1 Boost'
value 8
comment {
access 'read write'
type INTEGER
count 1
range '0 - 8'
dbmin 0
dbmax 5200
dbvalue.0 3000
control.13 {
iface MIXER
name 'IN2 Boost'
value 8
comment {
access 'read write'
type INTEGER
count 1
range '0 - 8'
dbmin 0
dbmax 5200
dbvalue.0 3500
control.14 {
iface MIXER
name 'IN Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -300
dbvalue.1 -300
control.15 {
iface MIXER
name 'ADC Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.16 {
iface MIXER
name 'ADC Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -17625
dbmax 30000
dbvalue.0 28500
dbvalue.1 28500
control.17 {
iface MIXER
name 'Mono ADC Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -17625
dbmax 30000
dbvalue.0 27000
dbvalue.1 27000
control.18 {
iface MIXER
name 'ADC Boost Gain'
value.0 3
value.1 3
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 1200
dbvalue.1 1200
control.20 {
iface MIXER
name 'ADC IF1 Data Switch'
value 1
comment {
access 'read write'
type ENUMERATED
count 3
item.0 Normal
item.1 'left copy to right'
item.2 'right copy to left'
item.3 Swap
control.22 {
iface MIXER
name 'ADC IF2 Data Switch'
value 3
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Normal
item.1 'left copy to right'
item.2 'right copy to left'
item.3 Swap
control.23 {
iface MIXER
name 'DAC IF2 Data Switch'
value 1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Normal
item.1 'left copy to right'
item.2 'right copy to left'
item.3 Swap
control.25 {
iface MIXER
name 'Headset Mic Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.26 {
iface MIXER
name 'Internal Mic Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Mono MIX DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.29 {
iface MIXER
name 'Mono MIX DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface MIXER
name 'Mono MIX OUTVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.31 {
iface MIXER
name 'Mono MIX OUTVOL L Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.32 {
iface MIXER
name 'Mono MIX BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.33 {
iface MIXER
name 'HPO MIX DAC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.35 {
iface MIXER
name 'HPO MIX HPVOL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.36 {
iface MIXER
name 'OUT MIXR SPK MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.37 {
iface MIXER
name 'OUT MIXR BST2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.38 {
iface MIXER
name 'OUT MIXR BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.39 {
iface MIXER
name 'OUT MIXR INR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.40 {
iface MIXER
name 'OUT MIXR REC MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.41 {
iface MIXER
name 'OUT MIXR DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface MIXER
name 'OUT MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.43 {
iface MIXER
name 'OUT MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.44 {
iface MIXER
name 'OUT MIXL SPK MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.45 {
iface MIXER
name 'OUT MIXL BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.46 {
iface MIXER
name 'OUT MIXL INL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.47 {
iface MIXER
name 'OUT MIXL REC MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.48 {
iface MIXER
name 'OUT MIXL DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.49 {
iface MIXER
name 'OUT MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.50 {
iface MIXER
name 'OUT MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.52 {
iface MIXER
name 'Stereo DAC MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.53 {
iface MIXER
name 'Stereo DAC MIXR ANC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.55 {
iface MIXER
name 'Stereo DAC MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.56 {
iface MIXER
name 'Stereo DAC MIXL ANC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.57 {
iface MIXER
name 'DAC R2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 IF2
control.63 {
iface MIXER
name 'LOUT MIX DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.64 {
iface MIXER
name 'LOUT MIX DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.65 {
iface MIXER
name 'LOUT MIX OUTVOL L Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.66 {
iface MIXER
name 'LOUT MIX OUTVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.68 {
iface MIXER
name 'SPOR MIX SPKVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.69 {
iface MIXER
name 'SPOR MIX BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.72 {
iface MIXER
name 'SPOL MIX SPKVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.73 {
iface MIXER
name 'SPOL MIX SPKVOL L Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.74 {
iface MIXER
name 'SPOL MIX BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.75 {
iface MIXER
name 'SPK MIXR REC MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.76 {
iface MIXER
name 'SPK MIXR INR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.77 {
iface MIXER
name 'SPK MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.78 {
iface MIXER
name 'SPK MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.79 {
iface MIXER
name 'SPK MIXR OUT MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.80 {
iface MIXER
name 'SPK MIXL REC MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.81 {
iface MIXER
name 'SPK MIXL INL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.82 {
iface MIXER
name 'SPK MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.83 {
iface MIXER
name 'SPK MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.84 {
iface MIXER
name 'SPK MIXL OUT MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.85 {
iface MIXER
name 'DIG MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.86 {
iface MIXER
name 'DIG MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.87 {
iface MIXER
name 'DIG MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.88 {
iface MIXER
name 'DIG MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.89 {
iface MIXER
name 'Mono DAC MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.90 {
iface MIXER
name 'Mono DAC MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.91 {
iface MIXER
name 'Mono DAC MIXR DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.92 {
iface MIXER
name 'Mono DAC MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.93 {
iface MIXER
name 'Mono DAC MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.94 {
iface MIXER
name 'Mono DAC MIXL DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.95 {
iface MIXER
name 'DAC MIXR Stereo ADC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.97 {
iface MIXER
name 'DAC MIXL Stereo ADC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.99 {
iface MIXER
name 'SDI select'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 IF1
item.1 IF2
control.101 {
iface MIXER
name 'Mono ADC MIXR ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.102 {
iface MIXER
name 'Mono ADC MIXR ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.103 {
iface MIXER
name 'Mono ADC MIXL ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.104 {
iface MIXER
name 'Mono ADC MIXL ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.105 {
iface MIXER
name 'Stereo ADC MIXR ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.106 {
iface MIXER
name 'Stereo ADC MIXR ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.107 {
iface MIXER
name 'Stereo ADC MIXL ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.108 {
iface MIXER
name 'Stereo ADC MIXL ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.109 {
iface MIXER
name 'Mono ADC R2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'DMIC R1'
item.1 'DMIC R2'
item.2 'Mono DAC MIXR'
control.110 {
iface MIXER
name 'Mono ADC R1 Mux'
value 'Mono DAC MIXR'
comment {
access 'read write'
type ENUMERATED
count 0
item.0 'Mono DAC MIXR'
item.1 ADCR
control.111 {
iface MIXER
name 'Mono ADC L1 Mux'
value 1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Mono DAC MIXL'
item.1 ADCL
control.112 {
iface MIXER
name 'Mono ADC L2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'DMIC L1'
item.1 'DMIC L2'
item.2 'Mono DAC MIXL'
control.114 {
iface MIXER
name 'Stereo ADC2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 DMIC1
item.1 DMIC2
item.2 'DIG MIX'
control.115 {
iface MIXER
name 'RECMIXR HPOR Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.116 {
iface MIXER
name 'RECMIXR INR Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.117 {
iface MIXER
name 'RECMIXR BST2 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.118 {
iface MIXER
name 'RECMIXR BST1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.119 {
iface MIXER
name 'RECMIXR OUT MIXR Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.120 {
iface MIXER
name 'RECMIXL HPOL Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.121 {
iface MIXER
name 'RECMIXL INL Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.122 {
iface MIXER
name 'RECMIXL BST2 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.123 {
iface MIXER
name 'RECMIXL BST1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.124 {
iface MIXER
name 'RECMIXL OUT MIXL Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# WARNING
# !!WARN!! BUZZ ANS BREAK EVERYTHING UNTIL REBOOT !!!!!!!
control.113 {
iface MIXER
name 'Stereo ADC1 Mux'
value 1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'DIG MIX'
item.1 ADC
and you can load it by doing
alsactl -f asound.state restore
To change the values, you have to edit the field "value" of a control and reload the config file with the precedent command. I tried to comment it, but I didn't test any microphone, because I didn't need it currently. We are supposed to have 2 microphones : internal and via the jack. I think it's possible, but I don't have any jack microphone, so if you need it, try to change the different settings and tell me if you find something.
I don't think any GUI, will manage to make the sound control work (even in alsamixer, it's a big mess), because there is no convention followed.
To be continued
Last edited by Ziqumu (2015-05-30 20:06:48)I had still freeze with uxa. I still don't have any freeze with disabled acceleration. But I also have the flickering tty, but it's not a big problem as this is still usable and I don't often use it.
Maybe when you tried, it was another bug that makes you freeze (with an older version of someting).. I don't know, I will write both solution on the topic.
I've done some search on the touchpad : If you look at the device output (cat /dev/hidraw2 for me), you will see that the device don't send anything when you have two finger that touch the device (so it's not possible to use it as dualtouch). I think it's just a starting data that is send from Asus Smart Gesture under windows that start the Multi touch mode. I've start a vritual machine and I gave it the touchpad usb device (wich is also the keyboard... Usb bus 1 address 3) and I started the driver. Under windows it worked well with multitouch. I killed the virtual machine and I got back my keyboard but not the touchpad. I watch at /dev/hidraw2 and the touchpad now give information with two and more fingers (also it give immediatly data and not after a small lag like normally). After a restart it was gone as expected. I watched the usb driver with usbmon and wireshark and I tried to reproduce UsbHid exchange between computer and device but it didn't work. I still don't know why but I will continue to search.
There is 3 sub device on the usb device mouse/keyboard. 0 is the keyboard, 1 the media key (fn keys except sound) from the keyboard, and 2 the touchpad. So if someone has time to works on media keys, I don't think this is verry difficult. (It's more difficult for the sound, win and sleep button on the screeen, because I didn't find any signals from it.
I will try to work on a aur package that give our kernel with fixes this summer. (And maybe also a pre-builded version).
Last edited by Ziqumu (2015-06-04 23:15:27) -
Flash videos suffering from intermittent "micro-freezes" in animation
Hello, I have been having issues lately with the latest version 12.0070 flash plugin causing flash based videos to have what I call "mirco freezes" or mircostutter, where a frame in the video freezes for a like a few milliseconds every so often. I ran DTC latency checker and got in the low 100's of microseconds of latency which is normal, even with no video playback. CPU usage is at 10% or less during video playback. I have done complete uninstall of flash, including the registery entry removal and folder removal, but even with fresh install, whether it be ActiveX version for IE or the plugin version for other browsers, still has the microstutter issues during video playback. I also upated all drivers and disabled hardware acceleration. For a final test, I disabled startup items with Msconfig, but I still get the microstutters in flash videos................So here is all I know to do is post my PC info and process monitor log file in the hopes that some bright computer programmer on here can see what is going on.......
My system info here:
System Information
Time of this report: 3/3/2014, 04:01:09
Machine name: GAMERPC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 12/13/13 14:36:57 Ver: 48.02
Processor: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 3022MB used, 15301MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: AMD Radeon HD 7900 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x6798)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6798&SUBSYS_0B001002&REV_00
Display Memory: 4095 MB
Dedicated Memory: 3046 MB
Shared Memory: 1049 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: ASUS VS238
Monitor Id: ACI23FA
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1267 (English)
Driver Version: 13.350.1005.0
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 2/23/2014 23:08:16, 1328328 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71EE2-24D8-11CF-4177-0A2BBEC2C535}
Vendor ID: 0x1002
Device ID: 0x6798
SubSys ID: 0x0B001002
Revision ID: 0x0000
Driver Strong Name: oem36.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_R575:13.350.1005.0:pci\ven_1002&dev_6798
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Speakers (eClaro)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_13F6&DEV_8788&SUBSYS_97837284&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: cmudaxp.sys
Driver Version: 5.12.0001.0008 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 10/4/2010 14:48:38, 1266688 bytes
Other Files:
Driver Provider: HT OMEGA Inc.
HW Accel Level: Basic
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: S/PDIF Pass-through Device (eClaro)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_13F6&DEV_8788&SUBSYS_97837284&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: cmudaxp.sys
Driver Version: 5.12.0001.0008 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 10/4/2010 14:48:38, 1266688 bytes
Other Files:
Driver Provider: HT OMEGA Inc.
HW Accel Level: Basic
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Microphone (eClaro)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: cmudaxp.sys
Driver Version: 5.12.0001.0008 (English)
Driver Attributes: Final Retail
Date and Size: 10/4/2010 14:48:38, 1266688 bytes
Cap Flags: 0x0
Format Flags: 0x0
Description: Line In (eClaro)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: cmudaxp.sys
Driver Version: 5.12.0001.0008 (English)
Driver Attributes: Final Retail
Date and Size: 10/4/2010 14:48:38, 1266688 bytes
Cap Flags: 0x0
Format Flags: 0x0
Description: Stereo Mix (eClaro)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: cmudaxp.sys
Driver Version: 5.12.0001.0008 (English)
Driver Attributes: Final Retail
Date and Size: 10/4/2010 14:48:38, 1266688 bytes
Cap Flags: 0x0
Format Flags: 0x0
Description: Wave (eClaro)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: cmudaxp.sys
Driver Version: 5.12.0001.0008 (English)
Driver Attributes: Final Retail
Date and Size: 10/4/2010 14:48:38, 1266688 bytes
Cap Flags: 0x0
Format Flags: 0x0
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Gaming Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC221
FF Driver: n/a
Device Name: Gaming Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC221
FF Driver: n/a
Device Name: G11 Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC225
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x1D26
| Matching Device ID: usb\root_hub20
| Service: usbhub
|
+-+ Generic USB Hub
| | Vendor/Product ID: 0x8087, 0x0024
| | Location: Port_#0001.Hub_#0002
| | Matching Device ID: usb\class_09
| | Service: usbhub
| |
| +-+ Generic USB Hub
| | | Vendor/Product ID: 0x046D, 0xC223
| | | Location: Port_#0008.Hub_#0004
| | | Matching Device ID: usb\class_09
| | | Service: usbhub
| | |
| | +-+ USB Input Device
| | | | Vendor/Product ID: 0x046D, 0xC225
| | | | Location: Port_#0004.Hub_#0005
| | | | Matching Device ID: generic_hid_device
| | | | Service: HidUsb
| | | |
| | | +-+ HID-compliant device
| | | | | Vendor/Product ID: 0x046D, 0xC225
| | | | | Matching Device ID: hid_device
| | | | |
| | | +-+ HID Keyboard Device
| | | | | Vendor/Product ID: 0x046D, 0xC225
| | | | | Matching Device ID: hid_device_system_keyboard
| | | | | Service: kbdhid
| | |
| +-+ Logitech Gaming USB G3 (MX518) Optical Mouse
| | | Vendor/Product ID: 0x046D, 0xC01E
| | | Location: Port_#0002.Hub_#0004
| | | Matching Device ID: usb\vid_046d&pid_c01e
| | | Lower Filters: LGSUsbFilt
| | | Service: HidUsb
| | |
| | +-+ Logitech HID-compliant G3/MX518 Optical Mouse
| | | | Vendor/Product ID: 0x046D, 0xC01E
| | | | Matching Device ID: hid\vid_046d&pid_c01e
| | | | Lower Filters: LGSHidFilt
| | | | Service: mouhid
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC221
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 86.0 GB
Total Space: 228.7 GB
File System: NTFS
Model: INTEL SSDSC2BW240A4 SCSI Disk Device
Drive: F:
Free Space: 951.5 GB
Total Space: 953.9 GB
File System: NTFS
Model: HGST HTS721010A9E630 SCSI Disk Device
Drive: G:
Free Space: 476.8 GB
Total Space: 476.9 GB
File System: NTFS
Model: TOSHIBA MQ01ABD050 SCSI Disk Device
Drive: H:
Free Space: 328.4 GB
Total Space: 476.9 GB
File System: NTFS
Model: TOSHIBA MQ01ABD050 SCSI Disk Device
Drive: E:
Model: PIONEER DVD-RW DVR-216D SCSI CdRom Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
System Devices
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Control Status and Global Errors - 3C2A
Device ID: PCI\VEN_8086&DEV_3C2A&SUBSYS_84EF1043&REV_07\3&11583659&0&2A
Driver: n/a
Name: Intel(R) C600/X79 series chipset PCI Express Virtual Root Port - 1D3E
Device ID: PCI\VEN_8086&DEV_1D3E&SUBSYS_84EF1043&REV_05\3&11583659&0&88
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller System Address Decoder 0 - 3CF4
Device ID: PCI\VEN_8086&DEV_3CF4&SUBSYS_84EF1043&REV_07\3&4F11E61&0&66
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QPI Link Reut 0 - 3C83
Device ID: PCI\VEN_8086&DEV_3C83&SUBSYS_84EF1043&REV_07\3&4F11E61&0&43
Driver: n/a
Name: eClaro
Device ID: PCI\VEN_13F6&DEV_8788&SUBSYS_97837284&REV_00\5&A5EEC4D&0&000008
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Target Address Decoder 1 - 3CAB
Device ID: PCI\VEN_8086&DEV_3CAB&SUBSYS_84EF1043&REV_07\3&4F11E61&0&7B
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 2 - 3CB4
Device ID: PCI\VEN_8086&DEV_3CB4&SUBSYS_84EF1043&REV_07\3&4F11E61&0&84
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Power Control Unit 3 - 3CD0
Device ID: PCI\VEN_8086&DEV_3CD0&SUBSYS_84EF1043&REV_07\3&4F11E61&0&53
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Address Map, VTd_Misc, System Management - 3C28
Device ID: PCI\VEN_8086&DEV_3C28&SUBSYS_84EF1043&REV_07\3&11583659&0&28
Driver: n/a
Name:
Device ID: PCI\VEN_8086&DEV_1D3A&SUBSYS_84EF1043&REV_05\3&11583659&0&B0
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Unicast Register 0 - 3CE8
Device ID: PCI\VEN_8086&DEV_3CE8&SUBSYS_84EF1043&REV_07\3&4F11E61&0&69
Driver: n/a
Name: Intel(R) C600/X79 series chipset PCI Express Root Port 1 - 1D10
Device ID: PCI\VEN_8086&DEV_1D10&SUBSYS_84EF1043&REV_B5\3&11583659&0&E0
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QPI Link 0 - 3C80
Device ID: PCI\VEN_8086&DEV_3C80&SUBSYS_84EF1043&REV_07\3&4F11E61&0&40
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_1002&DEV_AAA0&SUBSYS_AAA01002&REV_00\4&15E7D2AB&0&0110
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Target Address Decoder 0 - 3CAA
Device ID: PCI\VEN_8086&DEV_3CAA&SUBSYS_84EF1043&REV_07\3&4F11E61&0&7A
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller ERROR Registers 1 - 3CB3
Device ID: PCI\VEN_8086&DEV_3CB3&SUBSYS_84EF1043&REV_07\3&4F11E61&0&83
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Power Control Unit 2 - 3CC2
Device ID: PCI\VEN_8086&DEV_3CC2&SUBSYS_84EF1043&REV_07\3&4F11E61&0&52
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 IIO PCI Express Root Port 3a in PCI Express Mode - 3C08
Device ID: PCI\VEN_8086&DEV_3C08&SUBSYS_84EF1043&REV_07\3&11583659&0&18
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Unicast Register 0 - 3CE8
Device ID: PCI\VEN_8086&DEV_3CE8&SUBSYS_84EF1043&REV_07\3&4F11E61&0&68
Driver: n/a
Name: Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
Device ID: PCI\VEN_8086&DEV_1D2D&SUBSYS_84EF1043&REV_05\3&11583659&0&D0
Driver: n/a
Name: Intel(R) C600 Series Chipset SATA AHCI Controller
Device ID: PCI\VEN_8086&DEV_1D02&SUBSYS_84EF1043&REV_05\3&11583659&0&FA
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller RAS Registers - 3C71
Device ID: PCI\VEN_8086&DEV_3C71&SUBSYS_84EF1043&REV_07\3&4F11E61&0&79
Driver: n/a
Name: AMD Radeon HD 7900 Series
Device ID: PCI\VEN_1002&DEV_6798&SUBSYS_0B001002&REV_00\4&15E7D2AB&0&0010
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Registers - 3CA8
Device ID: PCI\VEN_8086&DEV_3CA8&SUBSYS_84EF1043&REV_07\3&4F11E61&0&78
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller ERROR Registers 0 - 3CB2
Device ID: PCI\VEN_8086&DEV_3CB2&SUBSYS_84EF1043&REV_07\3&4F11E61&0&82
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Power Control Unit 1 - 3CC1
Device ID: PCI\VEN_8086&DEV_3CC1&SUBSYS_84EF1043&REV_07\3&4F11E61&0&51
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Unicast Register 0 - 3CE8
Device ID: PCI\VEN_8086&DEV_3CE8&SUBSYS_84EF1043&REV_07\3&4F11E61&0&61
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 IIO PCI Express Root Port 2a - 3C04
Device ID: PCI\VEN_8086&DEV_3C04&SUBSYS_84EF1043&REV_07\3&11583659&0&10
Driver: n/a
Name: Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
Device ID: PCI\VEN_8086&DEV_1D26&SUBSYS_84EF1043&REV_05\3&11583659&0&E8
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Processor Home Agent Performance Monitoring - 3C46
Device ID: PCI\VEN_8086&DEV_3C46&SUBSYS_84EF1043&REV_07\3&4F11E61&0&71
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Processor Home Agent - 3CA0
Device ID: PCI\VEN_8086&DEV_3CA0&SUBSYS_84EF1043&REV_07\3&4F11E61&0&70
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 1 - 3CB1
Device ID: PCI\VEN_8086&DEV_3CB1&SUBSYS_84EF1043&REV_07\3&4F11E61&0&81
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Power Control Unit 0 - 3CC0
Device ID: PCI\VEN_8086&DEV_3CC0&SUBSYS_84EF1043&REV_07\3&4F11E61&0&50
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Unicast Register 0 - 3CE8
Device ID: PCI\VEN_8086&DEV_3CE8&SUBSYS_84EF1043&REV_07\3&4F11E61&0&60
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 IIO PCI Express Root Port 1a - 3C02
Device ID: PCI\VEN_8086&DEV_3C02&SUBSYS_84EF1043&REV_07\3&11583659&0&08
Driver: n/a
Name: Intel(R) C600/X79 series chipset SMBus Host Controller - 1D22
Device ID: PCI\VEN_8086&DEV_1D22&SUBSYS_84EF1043&REV_05\3&11583659&0&FB
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Ring to QuickPath Interconnect Link 1 Performance Monitor - 3C45
Device ID: PCI\VEN_8086&DEV_3C45&SUBSYS_84EF1043&REV_07\3&4F11E61&0&9E
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QPI Link Reut 1 - 3C94
Device ID: PCI\VEN_8086&DEV_3C94&SUBSYS_84EF1043&REV_07\3&4F11E61&0&4C
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 0 - 3CB0
Device ID: PCI\VEN_8086&DEV_3CB0&SUBSYS_84EF1043&REV_07\3&4F11E61&0&80
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 DDRIO - 3CB8
Device ID: PCI\VEN_8086&DEV_3CB8&SUBSYS_84EF1043&REV_07\3&4F11E61&0&88
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QuickPath Interconnect Agent Ring Registers - 3CE6
Device ID: PCI\VEN_8086&DEV_3CE6&SUBSYS_84EF1043&REV_07\3&4F11E61&0&9C
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 DMI2 - 3C00
Device ID: PCI\VEN_8086&DEV_3C00&SUBSYS_84EF1043&REV_07\3&11583659&0&00
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Ring to QuickPath Interconnect Link 0 Performance Monitor - 3C44
Device ID: PCI\VEN_8086&DEV_3C44&SUBSYS_84EF1043&REV_07\3&4F11E61&0&9D
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QPI Link Reut 1 - 3C93
Device ID: PCI\VEN_8086&DEV_3C93&SUBSYS_84EF1043&REV_07\3&4F11E61&0&4B
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Target Address Decoder 4 - 3CAE
Device ID: PCI\VEN_8086&DEV_3CAE&SUBSYS_84EF1043&REV_07\3&4F11E61&0&7E
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller ERROR Registers 3 - 3CB7
Device ID: PCI\VEN_8086&DEV_3CB7&SUBSYS_84EF1043&REV_07\3&4F11E61&0&87
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 R2PCIe - 3CE4
Device ID: PCI\VEN_8086&DEV_3CE4&SUBSYS_84EF1043&REV_07\3&4F11E61&0&98
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Ring to PCI Express Performance Monitor - 3C43
Device ID: PCI\VEN_8086&DEV_3C43&SUBSYS_84EF1043&REV_07\3&4F11E61&0&99
Driver: n/a
Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_84EF1043&REV_A5\3&11583659&0&F0
Driver: n/a
Name: Asmedia 106x SATA Controller
Device ID: PCI\VEN_1B21&DEV_0612&SUBSYS_84B71043&REV_01\4&E31A1DC&0&00E5
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 System Address Decoder - 3CF6
Device ID: PCI\VEN_8086&DEV_3CF6&SUBSYS_84EF1043&REV_07\3&4F11E61&0&67
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QPI Link 1 - 3C90
Device ID: PCI\VEN_8086&DEV_3C90&SUBSYS_84EF1043&REV_07\3&4F11E61&0&48
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Target Address Decoder 3 - 3CAD
Device ID: PCI\VEN_8086&DEV_3CAD&SUBSYS_84EF1043&REV_07\3&4F11E61&0&7D
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller ERROR Registers 2 - 3CB6
Device ID: PCI\VEN_8086&DEV_3CB6&SUBSYS_84EF1043&REV_07\3&4F11E61&0&86
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Semaphore and Scratchpad Configuration Registers - 3CE3
Device ID: PCI\VEN_8086&DEV_3CE3&SUBSYS_84EF1043&REV_07\3&4F11E61&0&5B
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 I/O APIC - 3C2C
Device ID: PCI\VEN_8086&DEV_3C2C&SUBSYS_84EF1043&REV_07\3&11583659&0&2C
Driver: n/a
Name: Intel(R) C600/X79 series chipset LPC Controller - 1D41
Device ID: PCI\VEN_8086&DEV_1D41&SUBSYS_84EF1043&REV_05\3&11583659&0&F8
Driver: n/a
Name: Intel(R) C600/X79 series chipset PCI Express Root Port 6 - 1D1A
Device ID: PCI\VEN_8086&DEV_1D1A&SUBSYS_84EF1043&REV_B5\3&11583659&0&E5
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller System Address Decoder 1 - 3CF5
Device ID: PCI\VEN_8086&DEV_3CF5&SUBSYS_84EF1043&REV_07\3&4F11E61&0&6E
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_17A0&DEV_7163&SUBSYS_00000000&REV_01\4&1B611CD4&0&0008
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 QPI Link Reut 0 - 3C84
Device ID: PCI\VEN_8086&DEV_3C84&SUBSYS_84EF1043&REV_07\3&4F11E61&0&44
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Target Address Decoder 2 - 3CAC
Device ID: PCI\VEN_8086&DEV_3CAC&SUBSYS_84EF1043&REV_07\3&4F11E61&0&7C
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 3 - 3CB5
Device ID: PCI\VEN_8086&DEV_3CB5&SUBSYS_84EF1043&REV_07\3&4F11E61&0&85
Driver: n/a
Name: Intel(R) Xeon(R) Processor E5 Product Family/Core i7 Interrupt Control Registers - 3CE0
Device ID: PCI\VEN_8086&DEV_3CE0&SUBSYS_84EF1043&REV_07\3&4F11E61&0&58
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.18221
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
ATI Ticker,0x00200000,0,1,Ticker.ax,
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,12.00.9200.16426
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
ATI MPEG File Writer,0x00200000,1,0,atimpenc.dll,13.30.0000.40223
AMD Video Decoder,0x00200000,1,2,atimpenc.dll,13.30.0000.40223
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
MMACE ProcAmp,0x00200000,0,2,MMACEFilters.dll,
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
ATI MPEG Audio Encoder,0x00200000,1,1,atimpenc.dll,13.30.0000.40223
Xvid MPEG-4 Video Decoder,0x00800000,1,1,xvid.ax,
AMD MJPEG Decoder,0x00200000,1,1,atimpenc.dll,13.30.0000.40223
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
AMD Video Encoder,0x00200000,1,1,atimpenc.dll,13.30.0000.40223
ATI MPEG Multiplexer,0x00200000,2,1,atimpenc.dll,13.30.0000.40223
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
MMACE SoftEmu,0x00200000,0,2,MMACEFilters.dll,
File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
AMD Video Scaler Filter,0x00200000,1,1,atimpenc.dll,13.30.0000.40223
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835
MMACE DeInterlace,0x00200000,0,2,MMACEFilters.dll,
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.18175
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.18175
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
AMD Video Rotation Filter,0x00200000,1,1,atimpenc.dll,13.30.0000.40223
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
ATI MPEG Audio Encoder,0x00200000,1,1,atimpenc.dll,13.30.0000.40223
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
Audio Capture Sources:
Microphone (eClaro),0x00200000,0,0,qcap.dll,6.06.7601.17514
Line In (eClaro),0x00200000,0,0,qcap.dll,6.06.7601.17514
Stereo Mix (eClaro),0x00200000,0,0,qcap.dll,6.06.7601.17514
Wave (eClaro),0x00200000,0,0,qcap.dll,6.06.7601.17514
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
WDM Streaming Capture Devices:
eClaro,0x00200000,2,2,ksproxy.ax,6.01.7601.17514
eClaro Digital,0x00200000,2,2,ksproxy.ax,6.01.7601.17514
eClaro Wave In,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
WDM Streaming Rendering Devices:
eClaro,0x00200000,2,2,ksproxy.ax,6.01.7601.17514
eClaro Digital,0x00200000,2,2,ksproxy.ax,6.01.7601.17514
eClaro Wave In,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
Video Capture Sources:
UScreenCapture,0x00600000,0,1,UScreenCapture.ax,5.00.0000.0160
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Audio Renderers:
Speakers (eClaro),0x00200000,1,0,quartz.dll,6.06.7601.17713
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: S/PDIF Pass-through Device (eClaro),0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Speakers (eClaro),0x00200000,1,0,quartz.dll,6.06.7601.17713
S/PDIF Pass-through Device (eCl,0x00200000,1,0,quartz.dll,6.06.7601.17713
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0
Process monitor logfile.PML here:
http://www.fileswap.com/dl/aY93egygnR/Hi
You said you are using Chrome
Did you notice the same issue using other browsers like Firefox or IE? -
Zen Micro Photo "Hardware Problem&qu
I have a Zen Micro Photo purchased back in Christmas of 2006, and now when I boot it up, an error comes up saying that there is a "Hardware Problem." I am not able to do anything when this message appears, so I tried to safe boot it by holding the power switch while inserting the battery. This has not worked, and because the MP3 player is not recognized when it is plugged in to my computer, I can not run the troubleshooting software.
I have emailed customer support and since it is out of warranty, they cannot do anything and recommended that I try here next. Has this happened to anyone before?"Hardware Problem" on the Zen Micro series of players is generally indicati've of a disk problem (usually a crash.) Some people replace the disk dri'ves on the Micro themselves. Others have found that since the dri've uses a Compact Flash interface, they can install a CF card, up to 32GB, in lieu of a disk dri've to transform the player to a much higher capacity player using flash memory that will not be as vulnerable to damage as a disk dri've.
-
Zen Micro plays slowly the speec
Hallo, I owned a new Zen Micro and I'm very happy. The songs are very well reproduced.
But I found a very strange problem: when I charged on the Zen mp3 files containing a speech, then the Zen reproduces them slowly, instead of in a normal velocity. The same files on my PC sound normally.
Has anyone had the some problem? Maybe do I something wrong when I charged the files on the Zen? Or is there a parameter that I must activate that I don't know?
Please help me!
FilKhz!! The Zen doesn't support Khz and more?
And what can I do? I do need to listen those file with the Zen!!
Can I transform those files with some software?
Anyway thanks for your help. -
Charge the Zen Micro in another coun
I know France and the US don't have the same electricity rate or whatever... and France and England don't have the same kind of plugs... Can I still charge my Micro Zen abroad in those countries if I have nothing but a plug adapter? Will it just take longer for it to charge?
Thanks!Hmmm are Creative trying to capitalise on those poor souls that don't realise their transformer works pretty much everywhere anyway with a US$5 socket adapter? Although I guess it could be useful for those with the new stripped down versions sans mains adapter...
-
Not all fields are getting updated in transformation
Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
RamonaHi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK -
Hi,
I'm working on SAP HR-PA stuff.
In standard data flow, 0HR_PA_0 & 0HR_PA_1 datasources feeding data to 0PA_C01 Cube.
Our detailed reporting requirements demands me to insert a DSO in between. I created a DSO with same fields as cube, and copied all the routines in the update rules and loaded data and everything is working fine.
Now, I wanted to use BI 7.0 functionality, So, i selected update rules -> Additional functions -> Create Transformation. .
This will convert all 3.5 routines into BI 7.0 routines, I guess.
But, after the data loads, surprisingly these transformation populating wrong data into DSO.
Is this the right way to create transformation from update rules?
Thanks,
VHi Vas,
I just read your thread on sdn for 0PA_C01 cube.
I need a small help from you.
I am also working on the same cube, same like you I am migraitng the data flow from 3.5 to 7.0. I have few routines in the update rules which i need to convert it to oops abap in bi7. You have this cube in 7.0 already. So, can you please send me the routine code you have. Actually i am not a abaper and my client also dont have any bw-abap person. I need to do some manual changes in the code. My data flow is exactly same as your data flow. I am unable to solve this problem from long time.
And also I need to put dso inbetween the flow as per our clients requirements. So where did yu out the start routines and infoobject routines in update rules of 3.5 to 7.0, i mean at what stage?, before dso or after dso? Also I have the INCLUDE in my routines that I am worried about.
If you provide me the code, i will really appreciate it. And in future we can share the knowledge as well.
Thanks.
Regards,
Harshal Panchal -
Transformation - Fields Missing!!
Hello Experts,
I am facing a strange issue in the transformation beteen DSO to Cube.
My DSO Contains 148 fields while in the transformation I can see only 131 fields.
IN thedevelopment Box the transformation appears fine but in the Acceptace box the mentioned problem
occurs.I tried regenerating the export datasource, activated & transported the DSO but all in vain.
PLease help.
Thanks,
SuyogHi,
Go to RSA1--> Data sources Choose source system as BI and find for data source with 8<DSO name>. Once you get the data source ,select change from context menu --> go to Fields tab and check under column Transfer (5th Column) for all fields . If any field is unchecked then check and activate data source to see all fields in Cube transformations.
hope it helps...
regards,
Raju -
Regarding Field Missing in Dso Transformation
Hi
Folks
I am facing the issue like
In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object 0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
so How can i get the field in DSO to Cube transformation.??
any settings have to be change???
waiting for yours Valuable answers
Regards
AnandHi,
Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
Regards,
Srinivas -
Apple Micro-DVI to Video Adapter New MacBook Air
Hi All,
I am brand new to the Mac world (Been a PC user my entire life). Thought I would take a gamble on a Mac and see how it goes. So far I have been really impressed and happy!
I bought a MacBook Air a few weeks ago. It's a 2.13 GHZ MacBook Air. I would like to connect it to my "old school" standard TV which has S-Video and RCA (Yellow) inputs. I went on the Apple Store and found the Apple Micro-DVI to Video Adapter which says it is designed for a MacBook Air. Previosly though, I saw a discussion on another Mac type site that said this adapter was designed for the old MacBook Air laptops. Does anyone know if this adapter will work on my new MacBook Air? The techspecs call my MacBook Air video output a "MiniDisplay Port". Is this just a new name for Micro-DVI?
Any help would be appreciated.
PeterNo, there is currently no adapter available to go from mini displayport to a compostie or s-video tv. Monoprice.com sells a mini displayport to hdmi cable. That's the closest there is.
Your mba doesn't have a mini-dvi port.
Glor -
I am using a lap top, just reinstalled everything, and now have Firefox 9.1 and am being told it is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.
See:
* http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Read-Me-Before-Posting-Titanium-Hotfixes/m-p/55632 -
How can I display XSLT transformer errors on a web page ?
Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
// instantiate the TransformerFactory.
TransformerFactory tFactory = TransformerFactory.newInstance();
// creates an error listener
XslErrorListener xel = new XslErrorListener();
// sets the error listener for the factory
tFactory.setErrorListener(xel);
// generate the transformer
Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
// transforms the XML Source and sends the output to the HTTP response
transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
public XslErrorListener() {
public void warning(TransformerException ex) {
// logs on error log
System.err.println("\n\nWarning on XEL: " + ex.getMessage());
public void error(TransformerException ex) throws TransformerException {
// logs on error log
System.err.println("\n\nError on XEL: " + ex.getMessage());
// and throws it
throw ex;
public void fatalError(TransformerException ex) throws TransformerException {
// logs on error log
System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
// and throws it
throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
AndreaThis code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/> -
How to delete the rule in transformation
Hi all ,
I have remodeled the info-cube and added one characteristics ZRMACTTRS. This characteristics got updated in transformation rule..Now i want to delete it from transformation but i am unable to do so ..
I tried deleting the rule and message was populated "one rule is successfully deleted " but yet it is not removed from transformation structure (this rule has a key,can i remove key from rule ?).
I have tried to remove the characteristics through remodeling but delete characteristics request is not getting active...
Please helpyoiu can try by putting the rule to 'initial' (in rule details)...ignore the subsequent warning and delete the arrow with a right-click. Then activate your rule again...maybe this will work.
M.
Maybe you are looking for
-
BADI is not getting executed in Portal (Front end)
Hello Portal Gurus We have developed a new enhancement recently and it is not getting executed in Portal...what will be reason...? Can someone please help me out in this...
-
Hi all, For reporting purpose, I need to populate data for opening balance and the changes for all the balance sheet items after consolidation. I believe we can do this by using movement type as an indicator. My problem now is for the data extracted
-
Is there any way to synch mail on two Macs so it doesn't have to be read twice?
Is there any way to process mail once instead of having to go through it again on each device? If you read or delete a message is there any way to have this synched on other devices?
-
Hi, We are getting the error "ORA-03106" The message is " Fatal Two Task Communication Protocol Error" The error ours only when trying out scheduled worksheet output for huge reports As it is very Urgent can anybody please help? Reply is highly appre
-
Hi, I made a site using iWeb a couple months ago and everything was fine. Last week I updated the site and announced it to a bunch of friends and about 80% could not get in or view the site. Most are on a pc, but some still were able to view it ok ev