Transfromation for 0FIGL_014 - fields not connected

Hi All,
I've activated ODS 0FIGL_O14 and wanted to create transformation but none of the fields are connected, between datasource 0FI_GL_14 and the ODS 0FIGL_O14. Do you have any solutions or suggestion how to get fields in this transformation connected? As i'm not too sure if manually i would connect everything correct.
Thanks
Jurgita

I wrote already above that i tried that and this doesn't help, it doesn't collect any transfromation or any DTP togethr with this ODS. I suspect that something went wrong isntalling the Business Content, something to do with Basis, as i went to the Metadata repository, i found this ODS 0FIGL_14 and chose option "Network display of the data flow" i get only single ODS without any single connection with the data sources or transformations. I looks like in the system it's like stand alone object not connected to anything
Jurgita

Similar Messages

Mac says that My Passport for Mac is not connected but it is there in Disk Utility

Passport for Mac has worked well for over 12 months but since Jan 13 it has not backed up and I get message that "your passport for mac is not connected".
It is physically connected however and shows up in Disk Utilitity.
I have been through the "Verify" process which indicates that it "appears to be in order".
Repair option does not happen due to "Error Live file system repair is not supported".
I have been into WD site but do not see any discussion of this problem.

Hello
i have macbook pro 10.9.2
i plugged my WD passport in to time machine it for the month
mac doesnt regnize it - but disk utility did
i went in activity monitor and quit the process "fsck_hfs" - this allowed eventually the pasport to show in finder -only with read only
i dont know what to do - i cant seem to copy the whole file (containing all back ups) to computer before erasing everything - as not enough room on computer - also tried carbon copy clone but says not enough room also
if i erase the passport on disk utility - will it go back to working again?
eva

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

SOLUTION for Time Capsule not connecting

After 2 days of apple support we have gotten to the bottom of what I hope is the same problem most of you are having.
ISSUE:
Time machine is no longer backing up suddenly and the mac will not connect to the TC disk. (Disk not found, server not available)
SOLUTION:
Apple discovered that the Keychain access password is the problem. Meaning either the password has gotten corrupt or never properly updated. What happens is when you try to re-setup the time machine backup, it does not ask for a password, this is where the problem i s.
Go into Keychain, search for 'Time' and delete the saved profiles there... then go back to system preferences to re-setup the time machine backup. When you select the disk it will THEN ask you for the password. Enter your password, which should update Keychain, then suddenly all will be OK.
NOTE:
I am not a tech support and if you discover I am misplacing a step or two please revise my above. With Apple support we tried so many avenues that I don't know if it was a combination of events that solved things... but ultimately we believe it was the Keychain problem specific.
GOOD LUCK!!

Good old ML.. even worse networking than Lion it seems.
Reboot the TC.. reboot the whole network.. from modem up to the clients.. starting with everything off.
Look at c12, c17
http://pondini.org/TM/Troubleshooting.html
And complain to apple about their bug heaven.

Firefox unable to connect after brand new first time installation, IE can load fine, I have followed all directions for firefox can not connect but other programs can, and it did not solve the problem

I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)

http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites

"Email for Nokia" application not connected to con...

I am using the "Email for Nokia – 10 Accounts" application (as it is named in the OVI-store) to send/receive my mail. Works pretty good using the application itself. However, when I want to send an email by first opening a contact on my E71 phone, it shows a pop-up that says the needed settings from Messaging are not present. So it looks like this push email application is not connected to the default email menu's of the E71 phone. Is there a way to solve this or "just the way it works"?

Very upset with Nokia's tech support service, taking so long not calling back after contacting them. Finally I found a work around. After reinstall the email software, setup a new email account never used with Nokia email before. Then the software will setup correctly instead using the messaging folder. This is a bug with the Nokia email software and the new firmware. OR the Nokia email software is intended to do it that way because it's a trial version. It just let you try it for the first time of installation.

Is there a fix for "iTunes could not connect..."

On my work PC (XP), I often get the message "iTunes could not connect to the iTunes Store". It usually happens on my first attempts to access the store in the morning. It's also seems to be random but mostly occurs on my first attempts to access the store for that day. I click on various playlist, "Podcast", "Movies" and back to store. I can usually get it working that way. Any ideas what causes this?

I'm getting the same thing all day. Usually after the first load I close itunes then load it again and it works, but today, since the update I haven't been able to access the store or download any of my podcasts, this is a real pain since I just got a $25 gift card in the mail 8(

Copy Control for EEWB fields not working

Hi Experts,
I have added one custom field to CRMD_ORDERAM_H using EEWB, now i want this field to be copied from Quotation to Sales order. I have tried with the following options:
1. Created new implementation Ztest for the Badi CRM_COPY_BADI with new filter value.
2. Assigned the implementataion in Copy control for transaction types.
3. Badi is getting triggered, but I am not able to copy the value to the sales order.
I have written the following code in ORDERADM_H method:
METHOD if_ex_crm_copy_badi~orderadm_h.
constants
INCLUDE crm_object_kinds_con.
INCLUDE crm_object_names_con.
INCLUDE crm_appointment_types_con.
local data
DATA:
    ls_orderadm_h_com    TYPE crmt_orderadm_h_com,
    lv_allowed           TYPE crmt_boolean,
    lv_ref_kind          TYPE crmt_object_kind,
    ls_input_field_names TYPE crmt_input_field_names,
    lt_input_field_names TYPE crmt_input_field_names_tab.
IF cs_orderadm_h is not INITIAL.
    lv_ref_kind = gc_object_ref_kind-orderadm_h.
    CALL FUNCTION 'CRM_ORDERADM_H_OBJ_ALLOWED_OW'
      EXPORTING
        iv_ref_guid            = cs_orderadm_h-guid
        iv_objectname          = gc_object_name-orderadm_h
      IMPORTING
        ev_allowed             = lv_allowed
      EXCEPTIONS
        admin_header_not_found = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0 OR lv_allowed <> 'X'.
nothing to do
      RETURN.
    ENDIF.
    CLEAR ls_input_field_names.
    CLEAR lt_input_field_names[].
    ls_input_field_names-fieldname = 'ZZDEP2PVNDPGM'.
    INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_orderadm_h_com-guid = cs_orderadm_h-guid.
ls_orderadm_h_com-ZZDEP2PVNDPGM = is_ref_orderadm_h-ZZDEP2PVNDPGM.
    CALL FUNCTION 'CRM_ORDERADM_H_MAINTAIN_OW'
      EXPORTING
        is_orderadm_h_com             = ls_orderadm_h_com
   IV_EXTERNAL_CALL              = FALSE
IMPORTING
   EV_GUID                       = cs_orderadm_h-guid
      CHANGING
        ct_input_field_names       = lt_input_field_names
   CT_DOC_LINKS                  =
   CT_DOC_FLOW_FIELD_NAMES       =
EXCEPTIONS
   HEADER_CREATE_ERROR           = 1
   HEADER_CHANGE_ERROR           = 2
   PARAMETER_ERROR               = 3
   PROCESS_TYPE_ERROR            = 4
   DELETION_NOT_ALLOWED          = 5
   NO_AUTHORITY                  = 6
   OTHERS                        = 7
    IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDMETHOD.
able to get the values to ls_orderadm_h_com and lt_input_field_names, but the value is not getting copied.
Any idea on this?
Thanks in advance.
Regards,
S Reddy

Hi Reddy,
You don't need to call functions like 'CRM_ORDERADM_H_MAINTAIN_OW' to update that attributes.
All you have to do is to fill changing structure CS_ORDERADM_H that belongs to your target document, with the values you desire (the value for ZZDEP2PVNDPGM field for example). Then fill changing structure CT_INPUT_FIELD_NAMES with the field names that you want to update ('ZZDEP2PVNDPGM' for example).
Kind regards,
Garcia

AT END OF for char field not working

Hi all,
AT END OF (char field) not working,
I sorted the itab and also avoid the stars(*) problem also, but its not working.
Thanks in advance.
Edited by: Vijay Babu Dudla on Jan 28, 2009 11:01 PM

Hi, Niranjan
Test the following Sample Code it will solve out your Problem,
" This is not working properly right now.
TYPES: BEGIN OF t_name,
name1(10), " if You Change Cut the Name2 from the 2nd line and past it up to the Name one will work fine
name2(10),
amount1 TYPE p,
amount2 TYPE p,
END OF t_name.
DATA: it1_sum TYPE STANDARD TABLE OF t_name WITH HEADER LINE,
      wa_it1_sum TYPE t_name,
      it2_sum TYPE STANDARD TABLE OF t_name WITH HEADER LINE,
      wa_it2_sum TYPE t_name.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 100.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 10000.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 105000.
wa_it1_sum-amount2 = 20500.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 21000.
wa_it1_sum-amount2 = 22000.
APPEND wa_it1_sum TO it1_sum.
SORT it1_sum BY name1 name2.
LOOP AT it1_sum INTO wa_it1_sum.
APPEND wa_it1_sum TO it2_sum.
AT END OF name2. " When you will use this in this Condition it will give you wrong Because this row is on number two and
                   " it is not changing but the Row one is Changing so it will work fine if LEFT MOST
    SUM.
    wa_it1_sum-name1 = 'End Name 2'.
    wa_it1_sum-name2 = 'End Name 2'.
    APPEND wa_it1_sum TO it2_sum.
ENDAT.
AT LAST.
    SUM.
    wa_it1_sum-name1 = 'At Last'.
    APPEND wa_it1_sum TO it2_sum.
ENDAT.
ENDLOOP.
Please Reply if need more help about it.
Kind Regards,
Faisal

ITunes 10.5 for Windows 7 not connecting to iTunes store.

I updated to iTunes 10.5 today hoping that Apple fixed the connection problems which came with previous versions of iTunes for Windows. Unfortunately I was wrong. After installing 10.5, I cannot connect to the iTunes store...again. The progress bar at the top locks (along with the message "Accessing iTunes Store") and after 30 seconds all I get is a blank page. This is exactly what has happed in the last couple of versions of iTunes for Windows. I tried some of the 'netsh' fixes seen on other posts and this did not solve the issue. I also tried unistalling the specific AppleApplicationSupport software (in this case 2.1.5) and re-installing the 1.5.2 version (which fixed the connection problems on the previous version of iTunes) as seen on other posts but doing this will not work either. Any suggestions out there?

since other people aren't having this same issue you need to try troubleshooting your own machine and network connections to fix this, it's most likely not due to apple software.
Reconfigure any security software to allow Apple's servers to pass.
Useful information for configuring your security software:
IMPORTANT: iTunes must be allowed to contact Apple using the following ports and servers:
          ▪          port 80
          ▪          port 443
          ▪          phobos.apple.com, deimos3.apple.com, albert.apple.com, gs.apple.com, itunes.apple.com, ax.itunes.apple.com, ax.init.itunes.apple.com, ax.phobos.apple.com.edgesuite.net
iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
iTunes also contacts VeriSign servers during an iPhone restore and activation:
          ▪          evintl-ocsp.verisign.com
          ▪          evsecure-ocsp.verisign.com
For more information see Update and restore alert messages on iPhone and iPod touch
Temporarily disable or uninstall your security software
If the current available version of your security software is incompatible with iTunes, you can disable the security software and test if it is the source of the issue. It might also be necessary to temporarily uninstall security software after making sure you can reinstall it and note any required licenses. A temporary deinstallation might be required because parts of some security software remain active in the background though they appear to be deactivated.
To reduce any security risks that security software is designed to prevent, consider making sure all files needed to reinstall it are available and disconnect network connections before uninstalling security software. Should this not be possible, such as if a download without active security software is required, that required step should be the only process completed without security software. For assistance in checking your configuration, disabling, or uninstalling your security software, please contact the manufacturer.
Once disabled or uninstalled, perform only the steps required to verify your issue has been resolved. Complete whatever update, restore, syncing, back up, activation, or other task you were troubleshooting. Once that task is complete, install and configure compatible security software to ensure your PC is protected.
If it isn't a program or software on the computer contact your Internet Service Provider and/or Router Company to configure or disable the firewall in the router settings.
To isolate the issue to this you can also try disconnecting the router and plugging your computer directly in to the modem but this does not help for troubleshooting time-out issues directly on any apple mobile devices only if you are syncing or going through iTunes on the computer.

LO delta for z fields not taking place

Hi All,
We have a problem with th one of our LO DS. We have recently added some Z feilds but then if any change is made then
1. Delta doesnot bring these changes
2. Full load brings these changes.
Now since thise has gone into production , and lakhs of data are mis matching since the changes have not been ca[ptured.
Any idea to resolve it .
Also suggest if any workaround possible
Regards,
Dola
Edited by: sushmita das on Mar 31, 2011 12:36 PM

First of all, what is the Datasource that you have enhanced?
And what is the CMOD Enhancement Function Exit that you are using?
As pointed out, the Delta might not be triggering for the Z fields (whenever you change it).
As far as the work around in concerned, i guess you're 1st level staging is a DSO (maybe Write-Optimized).
You need to write a program to update this DSO.
If you have any other DSO's being updated for the required Z fields, you can make use of that.
Otherwise, you'll have to write an Extract program in R/3 for the required fields (including the Key Fields in DSO) and then update the DSO with this.
Then update the 2nd level DSO (Standard), if any, or directly the Cube.
I am doing the same right now as we had an issue with 2LIS_02_SCL and the Delta was not triggered due to an issue with the CMOD code.

CRM extractor 0CRM_SERV_PROCESS_H delta for ZZ-fields not working

Dear all,
We are experiencing trouble with a extractor 0CRM_SERV_PROCESS.
We have extended the extract structure of this extractor with an append structure containing some custom date and text fields.
When doing a full load or a delta init, all fields arrive properly in SAP BW. In RSA3 in CRM, everything appears to be correct.
When performing a delta update however, the custom fields appear as null in SAP BW while the standard fields are updated normally (null as in empty or 00000).
After browsing thru this forum and some sap notes (661340, 692195, 871930, 887724, 892022) I still haven't found a solution.
Does anyone have an idea of how to solve this?
Thanks in advance
Jan W

HI,
What is the logic you ahve used to populate the values for new appended fields ?
Is it BADi, User Exits or mapping module enhancement ? Value population to custom field code should be checked throughly.

IPad Air cannot start cannot sync as looking for iCloud password not connecting to inernet

Entering password means nothing as cannot connect to the interenet

This is an iPad Air keeps asking for a iCloud password but doesn't do any good as it cannot open and connect to the internet until activated. Would just do a complete initialization as do not know how to get there.

F4Help for selection fields not available

Hello Friends,
I have created a datasource in Bi7.0 .while creating this i have put selection option X(selection possible) and Selection option 3(EQ & BT) for the three characteristics in the datasource and activated it.
When i am creating the Infopackage for loading the data to PSA, with in infopackage in Data selection tab, when i am selecting the characteristic value for the above chars, the system says "Datasource does not exist in the source system of version A"
Why am i not able to select the values here?
Please let me know friends if you have any idea?
Thanks
mv_d

Hi Friends,
Does anyone have any idea what could be going wrong in this case?
Why am i not getting F4 help values in Infopackage?
Thanks
mv_d

FaceTime for macbook pro not connecting

I am currently deployed. My FaceTime used to work out here but now it doesn't. When I attempt to make a call it says connecting and then it beeps 3 times and drops the call.

So after I updated my software and restarted my computer, Facetime is now working! I was able to see my witness my daughter's birth! Update your software! This should fix the issue!

Transfromation for 0FIGL_014 - fields not connected

Similar Messages

Maybe you are looking for