Transit time of routes from the availability check

is it possible to exclude the transit time of routes from the availability check

Dear Varada,
no, it is not possible to exclude the route transit time from the availability check process. The ATP process and transportation scheduling are always running together because we have to deliver to the required relivery date. Therefore the availability check always takes into consideration the transportation scheduling.
I hope, this information helps you a little bit further.
Kind Regards,
Akmal Vakhidov
Development Support SD, SAP, Walldorf/Germany

Similar Messages

  • TS1398 In "Set Up" I try to select our secured WIFi router from the list of available networks.  However, it will not allow me to select it. This then prevents me from going to the next step. What do I do?

    In "Set Up" I have tried to select our secured WiFi router from the available list shown.  It is listed.  However, when I try to select it, it will not check off or remain blue when I lift my touch.  This then will not allow me to go on to the next step.  What do I do to connect to a secure WiFi router? I do know the WEP Key number but there is no place to type then in.
    Alice from Hart

    The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

  • Issue with sales order when doing the availability check.

    In MD04 we have a material avail date of 12.05.2011.    The order was then changed to 13.05.2011 delivery date to reflect this availability,  but then delivery time was added e.g GI time and route time which then showed the sales order in MD04 as 18.05.2011.    However,  if we run the availability and take the 18.05.2011  and key this in the delivery date,  it shows in MD04 as 13.05.2011.  It seems like the availability check is only looking backwards,  and I can't find a setting in ATP relating to this.  In MM they have foward and back consumption in days on MRP3.  Do these fields impact this.
    regards
    Kylie

    Check in OVLY what is maintained to your sale order type
    thanks
    G. Lakshmipathi

  • HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

    I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

    This works in many different ways and in lots of apps.
    Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
    To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

  • A simple list with seven time buckets starting from the date report is run.

    Hi All,
    I am new to ABAP.Recently i have planned to write a progam which will help in planning the delivery of scheduled items.For a given sales Org. it will display all the undelivered,delivered items in a simple list and sort them with delivery dates.it will also provide a summary report at material group.For that i have used selection screen(LIKP-VKORG-Obligatory).when i enter VKORG Details i should get all the delivery docs for which delivery is not done or partially done.For this i have taken one more table LIPS
    (LIPS-MATKL,LIPS-MATNR,LIPS-VBELN,LIPS-POSNR,LIPS-WERKS,LIPS-LFIMG,LIPS-MEINS) for tables LIKP and LIPS VBELN is the key field.when i enter VKORG Data in the selection screen ,how can i get the data from LIPS Table.Please explain?
    Also report should be simple list with seven time buckets starting from the date when the report is run.The amount of quantity to be delivered should be displayed under appropriate bucket i.e within the bucket where its delivery date falls in.for ex:If the report is run on Tuesday 15th march 2010 then the start date 1 should be starting date of the week which is Monday 14th March.
    The report will be summarized at Material Group and Material Number.
    Appreciate your help
    Thanks and Regards,
    Shakeer Hussain

    Sorry, sounds too much like a complete requirement you want done for you by the community.
    Please work on it yourself and search for available information before posting specific problems only.
    Thread locked.
    Thomas

  • Does BOP respect the availability check setting made in Schedule line category?

    Hi Gurus,
    Does BOP respect the settings made for availability check in schedule line category?
    Thanks,
    Nihar

    Hi Sourabh,
    In the Schedule line Category, we have an option Availability check right?
    Business requirement is to suppress Availability check at schedule line category level, where Availability check box is not selected.
    When I trigger availability check manually, the confirmation happens on the day requested & no additional schedule lines are created.
    For the same order, if I run the BOP with the above settings made in schedule line category; order is confirmed & is checking against stock & lead time.
    My question is: Online ATP respect the availability check setting made in schedule line category. Does BOP respects the same as Online ATP?
    I hope I was clear!
    Thanks,
    Nihar

  • Changing the Availability Check key in an existent Sales Order line

    Hello gurus.
    Is it possible to modify the Availability Check key (VBAP-MTVFP) of a material in an existent Sales Order line?
    I changed it in the material master, but since documents are not automatically updated, I wanted to modify this value in an existing sales order line. I am not even able to find the field in it.
    I had to delete the order line and create it again, but then I have troubles getting the exact same confirmed date that I had before.
    Any help? Thank you.

    You cant see at item level.  To see in sale order, click from top menu bar, Environment -- Availability.   Now you can see the availability check on top of the screen.
    Meanwhile, I dont think, this field will be in editable mode once partial delivery is made in which case, LSMW also wont help you.
    If your requirement is desperate to change the availability check, to me the available option is close the existing sale orders, create fresh orders after changing the availability check in material master.  On the other hand, if you want to change only in sale order, then the option is LSMW as you cant even succeeed in TCode MASS
    thanks
    G. Lakshmipathi

  • I am setting up a new Time Capsule to replace another hard drive.  Is there any way to include the the Time Machine history from the old drive on the new Time Capsule?

    I am setting up a new Time Capsule to replace another hard drive.  Is there any way to include the the Time Machine history from the old drive on the new Time Capsule?

    Check item #18 of Time Machine FAQ, particularly the material in #3 of the "How to" section.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    Hi, likely the easiest is to just poll the drive & get something like this...
    Get MacScan...
    http://www.apple.com/downloads/macosx/networking_security/macscan.html
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
    But if you have a good external drive already, just clone it.
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/

  • Consingement Stock during the availibility check

    Dear All ,
    During the availibility check I want to consider  the customer consingment  .
    E.G   if the plant level stock is 300 and customer consingement  stock is 30  then the ATP quantity should be 330 wen i am performing the Availibility check ...
    Pls help me in this regard
    Thanks in advance
    Regards
    Satish

    hi,
    you cannot take into consideration the stock available at consignee for availability check. the consignment stock is treated as special stock unlike unrestricted.
    For transactions such as make-to-order production, consignment or returnable packaging processing that create special stock, the availability check is performed against special stock.
    The following elements can be included in the availability check:
    Stock
    safety stock
    stock in transfer
    quality inspection
    blocked stock
    regards
    sadhu kishore

  • Bapi or Function Module to do the availability check for Planned Orders

    Hi all,
    I need a Bapi or a Function Module to do the availability check for a Planned Orders. Anyone knows how?
    I will use it in an Exit.
    Thanks in advance
    Points will be given

    I think I found it.
    If anyone is searching for it too, we will use these one:
    CO_ZA_AVAIL_CHK_ORDER_MULTI

  • WHILE CREATING PURCHASE REQUISITION,THE AVAILABILITY CHECK FOR THE MATERIAL

    dear Friends,
    our users want to  WHILE CREATING PURCHASE REQUISITION,THE AVAILABILITY CHECK FOR THE MATERIAL SHOULD BE ENABLE,
    at present we maintaing KP in Material Master.  if we activated what will happen?
    please advice.
    with regards,
    Rajesh G

    Hi,
    The availability check is generally used for goods movements(GR,GI,reservation) & not for PRs.
    Regards,
    Vijay

  • What is the Availability check relevant for batches in Std. SAP except CH

    Hi,
    What is the Availability check value in material master relevant for batches in standard SAP except CH.
    As far as I know CH will enable to have automatic batch determination at sales order level. In the same manner, do we have any other availability check value in standard SAP like CH which will enable batch determination at delivery level.

    Don't post the same question repeatedly. Keep one thread open and close the other threads.
    You have already posted the same at  Wha is batch relevant availability check value in standard SAP except CH
    Regards,

  • My ipod nano is fully charged (I believe) but every time i disconnect from the computer it turns itself off

    My ipod nano is fully charged (I believe) but every time i disconnect from the computer the screen just shuts down and nothing happens. Occasionally it might work but the battery is already as low as it can go and turns it self off. What should i do?

    So the iPod only powers on when connected to an external power source such as a USB port on your PC or when connected to a wall charger?  If so, that is a very good indication that your iPod's battery is shot and in need of replacement.
    Apple can swap it out for a flat fee or you can send it to a third party repair service for a bit less.
    B-rock

  • Access a webserver on a computer that has a router from the internet.

    Hi I am new to routers and wanted to get some information on how to access a webserver that is on a computer which is connected to a router. I am very confused about port forwarding. Basically lets say that the webserver is on a computer with the ip of 192.168.1.100. I want to know how to use the internet IP (either one that is auto or one that is fixed) to connect to the webserver outside of the local network from a computer on internet. I was able to do it before the router was installed. Can someone explain this to me or point me into the direction of something that is easy to understand? Thanks, Message Edited by wjriv on 03-26-2008 09:16 PM
    Message Edited by wjriv on 03-26-2008 09:16 PM

    Still having problems..   I  have configured the router to forward ports 80  (web server) to  my Linksys router address of 192.168.1.100  (which is the address for the computer that the web server is on).   I also tried DMZ to 192.168.1.100..
    I use DynDns to direct my IP address...
    I know it works, because I can access the router config from the Internet through port 8080...   But when I try to put in my DynDns or actual IP address  (for example: 100.110.10.201)   I enter it as follows:    http://100.110.10.201:80
    But I am not able to access the web server from out side of my network.
    I have also made my computer with the web server keep the IP address static.
    Are there any other things that need to be configured in the router or even in the firewall of the computer? 
    I have noticed that this has been a major issue in different forums, but I have not been successful with a solution.
    My ISP is  Bellsouth.net..   I am not sure if  they could be blocking anything..
    It actually works when I remove the router from the system and just connect it directly..  so that is telling me that there is something else that needs to be configured on the router.
    Can anyone help me or direct me to the solution?
    This is really frustrating....
    Thanks..

Maybe you are looking for

  • Newbies can script! Script to connect to the internet with WPA.

    Assuming you have wpa_supplicant set up: #!/bin/bash # A simple script to ease your life. echo First, please type in the name of your wireless adapter "(normally wlan0)". read INTERFACE echo Please enter what DHCP client you want to use "(dhcpcd or d

  • How to know which report is using which view

    Hi all, is there any way to get the details of which discoverer report is using which view by using any sql query. Thanks in advance

  • How to achive this using analytical function-- please help

    version 10g. this code works just fine with my requirement. i am tyring to learn analytical functions and implement that in the below query. i tried using row_number , but i could nt achive the desired results. please give me some ideas. SELECT c.tax

  • How to find the date on which notification task has been released?

    Hi All, I am an ABAPer, I have a functional doubt. I have got a functional Spec's for which I have to create a report. Here, I need to retrieve the field for "Date when the notification RECV task has been released". I have checked and analysed that t

  • How to use object type collection in my function?

    Hi, I want to declare Object type collection with in my function like same a Record type collection. But it is saying error like below PLS-00540: object not supported in this context. Can anyone tell me how can i resolve this? I don't want to go with