Transition and Still Clip Time Adjustments Don't Work Correctly

When I have a group of still photos and transitions in a movie along with a music track I can't seem to get the transitions or the clips to keep a time setting I apply using the "Transition Adjustments" drop-down menu.
I put in 2.9s and when I click "Done" they all become 3.4s. When I try to change the transition time same thing, 0.9s becomes 0.6s.
There must be something obvious I'm missing in the overall approach to times with a music clip or not? I tried removing the music clip entirely in case it was pinning the time of each clip cumulatively to the music, but same thing with no music.
Any help?
JoeL
Atlanta, GA

Watch this and adjust your project then tell me if you have the same issue.
http://www.youtube.com/watch?v=AHMIUSeI0Gs
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
I may receive some form of compensation, financial or otherwise, from my recommendation or link

Similar Messages

  • I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

    i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

    Hi
    Trying to get a picture of it.
    • Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
    • Any other hard disks connected ?
    • If so - Formatted as ?
    Yours Bengt W

  • I can't open video file in the page , i download and install flash many time but don't work , i use firefox 5 and windows 7

    i can't open video file in the page , i download and install flash many time but don't work , i use Firefox 5 and windows 7

    My current version of Chrome is having problems, too! It's so annoying. Anyone have any suggestions now? I basically can't view or download any PDFs because of this.
    Does anyone else think this is a problem not only with Adobe? I would think Apple would have something to do with this? Wouldn't they get some idea from the developer versions that no browser can open PDFs while running Lion!? Pretty bad customer service on the part of a company that prides itself on being VERY customer-friendly. Wouldn't you say?

  • After upgrading to Mavericks, F14/F15 brightness adjustments don't work

    After upgrading to Mavericks, F14/F15 brightness adjustments don't work.  The screen appears to be "locked" at the dimmest brightness level.  How do I adjust the brightness?

    I am home now and I just confirmed that I have a brightness control slide in my Sys Pre---> Display. However, this for my Apple Cinema display. When I was using another name brand, this wasn't available to me. Nor could I use F1 and F2.
    I also went to Sys Pre---> Keyboard---> Shortcuts---> Display---> Changed those values to F5 and F6, since they were free for me. And they were able to change the brightness for me. Went to test them, and I was just given that error chim and nothing on the display changed.
    So I went on down the list... Accessibility---> checked Contrast and changed those to F5 and F6. Ahhh, now I can change that. Now I know that I can use the F5 and F6 for something.
    I know that you are talking about brightness, but double check the Contrast settings to see if you were mistaking the two. After years of setting my TV with Video Essentials, I still get the two mixed up from time to time.
    KOT

  • I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

    I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

    Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

    If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive  with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
    If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
    Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
    I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
    There are others here who can help you with Yosemite.
    Good Luck.

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • I just updated to Adobe Reader 11.0.07 on my Mac 10.6.8 and now the video files don't work.  How do I uninstall the update and return to the previous version?

    I just updated to Adobe Reader 11.0.07 on my Mac OS version 10.6.8 and now the video files don't work.  How do I uninstall the update and return to the previous version?

    I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)."  My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac?  Sometimes when I try to view streaming video I get sound but no video.
    >

  • HT4528 I pulled my iPhone out of the docking station/speakers and now the ring tones don't work.  Anyone know a fix for this?

    Does anyone know if there is a fix for iPhone 4S when you pull it out of the docking station and now the ring tones don't work -- it only vibrates.

    Basic troubleshooting of the device is reset, restart, restore (first from backup then as new).  Has any of this been tried?
    Do other sounds work?
    Have you checked to see if the dock connector or headphone jack have debris in them?

  • My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    Contact itunes support.  Click Contact Us at the bottom of this page.

  • CC: pgup and pgdn in the timeline don't work [was:pgup]

    In Premiere cc pgup and pgdn in the timeline don't work. What can be the problem?

    Pgup/down shows next or previous screen.
    Might want to zoom in on the timeline to get it to work.

  • I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

    Follow the directions here:
    http://support.apple.com/kb/HT2109

  • Pause, back, and fwd (F6-8) keys don't work with iTunes. [Windows 7 64-bit]

    All my other F# keys work (I can adjust the screen brightness, adjust the volume...etc) but my Pause (F8), Back (F7) and Fwd (F9) keys don't work with iTunes. Though they DO work with Windows Media Player.
    How can I get them to work with iTunes?
    I'm using Windows 7 64-bit on a macbook pro.

    Same problem here.
    I'm using Macbook late '09 + Windows 7 64-bit + iTunes 10.0.1.22 for Windows,
    and my media function keys don't work. I don't use Windows Media Player though.

  • Arrows and page up/down keys don't work (also not in previous version)

    Arrow and page up/down keys don't work. Problem started a fe2w months ago; upgraded to Beta but it made no difference. Sorry to report that they work fine in Internet Explorer but i DO NOT want to switch. Thanks!

    IU'm curious if this is a 'getting used to Macs' issue;
    I'm on my first Mac [and OS X] as well, and to
    me tthese friggin keys "don't work" either.
    That is, they do not do anything useful, like
    go to the start or end of a text field. The
    keys do function, though. Home goes to the start
    of a document, and end goes to the end. Seems
    silly to me; how often do you go to the start
    or end of a document, versus the start or end
    of a line? Two points off your usability rating,
    Apple
    Anyways, if this [the keys doing different things
    under Mac] is the issue, see if Apple-Left Arrow
    and Apple-Right Arrow do what you're expecting
    Home and End to do.

  • CMYK gradient maps don't work correctly in Photoshop CS 4

    Gradient maps built with CMYK colors in Photoshop don't work correctly in CS4.  For one particular client I often use a brushed steel background. To control color shifts on the press I used a gradient map blending from C0 M0 Y0 K0 to C40 M20 Y20 K100. This has worked great in the past, but once you open that gradient map in CS4 and start editing that gradient at all, even if you edit it back to the original CMYK numbers, the colors shift drastically, and if you watch the info palette, the colors get totally remapped to a different black. I can go in a reset the black to the C40 M20 Y20 K100 mix, but it doesn't work. When I go back in, it completely changes them.
    Since this works fine in CS3 and not in CS4, is this a program bug? I'm not doing anything differently.
    It was a great way of controlling neutral gray mixes (and other color mixes) for CMYK printing. Is there a fix for this? Adobe, is anyone addressing this bug? I've read other threads on this, but with no solutions.
    Kent Bingham
    Digital Illustration and Design
    I couldn't attach the .psd files, so I uploaded here for reference:
    http://www.kentbingham.com/gradientmap-error.zip

    I have not gone back to check how this is handled in CS3 yet I could duplicate your problem in CS4.  The changing of numbers in the CMYK looks like it has to do with the color mangement settings in Photoshop.
    I was able to make sure the numbers input to the gradient map did not chang.  I did this by going to Edit>Assign Profile  and then clicked the option "Don't Color Manage this Document"    
    This may not solve your problem directly yet it does indicate that the problem you have (or that Adobe has) is related to how the color management is being handled.
    So one question would be are you using the "exact" color management settings in CS4 as you did in CS3 and were those in place when you imported the file into CS4.  If not, and if you did not have the correct warning options set, there may have been a color setting change of which you were not aware.
    While I was able to keep the original settings from changing in the Gradient Map, there was still a problem in CS4 where the Lab values would change (and the appearance on the LCD screen) after doing any color picker editing and changing the CMYK values back to 40 20 20 100.  This definetly seems related to the color model/probile/management system in place.  So it appears that even though I can get the CMYK numbers to stay and not change, there is still a bug when making no changes to the color management settings, and the CMYK values are the same, that the Lab values and the appearance on the screen change.
    Hope you can get Adobe's attention.  Looks like a bug to me.

Maybe you are looking for

  • Remote Monitoring Latest Best Practice Architecture

    Hi guys, I've developed very few remote monitoring systems in the past. One of them was using a PXI RT and the rest are cRIO. The approach and architecture were based from some of the things I've read from ni.com and this forum. In the process, there

  • Apps won't switch to landscape mode

    Many of my apps won't switch to landscape mode (e.g., Facebook, Twitter, Yelp).  I know that landscape works on my phone because Photos, Messages, Calculator, etc. will switch to landscape mode.  Also, I don't have the portrait lock on.  The apps use

  • 2KEE and KE5Z

    Hello when I am executing 2KEE and KE5Z reports with same input parameters(selections)  I am getting the different result, what is the major difference between these reports and why I am getting different results and which report is correct?. Can you

  • In the report ME2N

    Hi, In the report Me2n, I have come across a new requirement to list Open PO's with Movement type 124 (124 Return delivery from Blocked GR stock). Can we add this to the "Selection Parameter" and be able to report. With Regards, jaheer

  • How to call ABAP transaction from Webdynpro in NWBC

    Hi I need to develop an Webdynpro application who lists Sales Orders. The Application is launched in NWBC DESKTOP version. This part is no big deal... But: i need to gain users the possibility to display the Sales Orders in T-CODE VA03 (ABAP) when th