------Transition glitch - shows blink cuts of other frames.........

Hey guys,
I'm almost done wrapping up a marathon of a video series I'm putting together and just started applying
transitions = one of the last elements in my editing...
I've been looking everywhere for solution to the issue I'm about to describe but haven't found anything...
The issue/glitch is after I apply a transition - such as a cross dissolve......the cross dissolve doesn't
just go from one cut to the next...it includes a "blink" split-second glimpse of a seemingly random other frame
somewhere else in the video ---- one or two or three cuts back or forward (frames that have nothing to do
with the transition b/ one cut to the next in which the transition was applied)...
It does this for every transition that I apply...
Here's what it looks like --- the first pic is the frame I'm transition from......the second pic
is the weird glitch I'm talking about.......and the third pic is the next frame I'm transitioning to...
So number #1 and #3 pic's should be there...but not #2...
What the hell is this and do you have a solution - I need to get this fricken series done and I've
had enough of these little glitches/problems you have to deal with.......can I get an AMEN??!!
Thanks!

Ok...thanks for you help guys...I think I've found the method to it's madness...and the way I interpret your input so far...it's not what you're talking about - therefore I don't have a solution...but could be wrong so let me know...
My video consists of both Live Video and ScreenCasts -- as mentioned before...
The glitch isn't occuring with the Live Video transitions...
My ScreenCasts consist of PowerPoint ScreenCasts and Website ScreenCasts...this is where the glitch is occuring and the method to it's madness seems to be that the "blip/blink" frames that are showing up (pictured above) consist of a previous ScreenCast...so for example...
I have a ScreenCast video of "ABC" site...then the next cut or video is a PowerPoint ScreenCast...then the next cut or video is another ScreenCast of "DEF" site... =========== so I have one PowerPoint ScreenCast in between two Website ScreenCasts...
The "blip/blink" frames that are popping up between the two scenes consist of "ABC" site ScreenCast...
Does this make sense?
Any suggestions as to how to fix...?
Thanks so much

Similar Messages

  • Has anyone else experienced a glitch when making cuts? Many of my cuts slip a frame or two when moved from source monitor to sequence and it started with the latest update

    Once I updated to the latest version of Premiere 2014.2 I started experiencing a glitch when my cuts would slip a frame or two. At first it was randomly. Then I had footage I was using that was an .avi file that I converted to .m4v using vlc and now in my Premiere project, are having the greatest difficulty keeping my original cut that I create in my source monitor. When I bring it into my timeline, the new frames are added. When I double click the clip into my source monitor, I see that my original cuts remain, not shifted. Looking back in my timeline, unwanted frames are still there. I have to bring it into my source monitor to guess where the right frame would be to compensate for this. It happens more often with the converted files but still happens to .mp4s as well. I am using a Mac Pro 15-in from Early 2011. Thanks for the advice in advance!

    I downloaded and installed the latest iTunes 11.2.1 (1) update yesterday. It appears to have corrected this issue to a large extent: plugging in an iThing to sync no longer seems to cause explosive growth in memory footprint. leaks reports a much slower growth in dead memory:
    leaks -nocontext -nostacks iTunes | grep total
    Process 27307: 353 leaks for 726488 total leaked bytes.
    20 minutes later:
    leaks -nocontext -nostacks iTunes | grep total
    Process 27307: 364 leaks for 1256056 total leaked bytes.
    20 minutes later, after DLing updated apps and doing another sync:
    leaks -nocontext -nostacks iTunes | grep total
    Process 27307: 364 leaks for 1256056 total leaked bytes.
    Memory allocation started at 70Mb, grew to 200Mb, and appears to have stabilized there.
    I'm going to keep an eye on it overnight, but it looks as if this may not be a complete system killer as it was before, at least in my case. In any case, I can highly recommend this latest iTunes update for anyone else experiencing this specific issue. Updating bug 16772016 with this new information.

  • FCP transition glitch

    FCP transition glitch when exporting to Quicktime. When played in Quicktime the transition skips back a frame.
    Dual 2.7 Ghz Power PC G5   Mac OS X (10.4.8)  

    did you cut a small section out of a single clip and then transition from one side back to the other? If so, your transition is grabbing onto handles from the previous side of the clip. Ifyou trim off some of the second clip it could solve the issue.

  • How To Show Blinking Cursor In Text Input Control

    Hi,
    How to show blinking cursor in a text input control?
    I am using this for login page
    Thanks.

    Hi!
    you can try this!
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" horizontalAlign="center">
    <mx:VBox horizontalAlign="center" paddingTop="100">
    <mx:HBox horizontalAlign="center">
    <mx:TextInput id = "textinput1" />
    <mx:Spacer width="10"/>
    <mx:TextInput id = "textinput2" />
    </mx:HBox>
    <mx:Spacer height="50"/>
    <mx:HBox horizontalAlign="center">
    <mx:Button label="setfocus1" click="setTextInputFocus1(event)"/>
    <mx:Spacer width="5"/>
    <mx:Button label="setfocus2" click="setTextInputFocus2(event)"/>
    </mx:HBox>
    </mx:VBox>
    <mx:Script>
    <![CDATA[
    private function setTextInputFocus1(evt:Event):void{
    textinput1.setFocus();
    textinput1.setSelection(textinput1.text.length,textinput1.text.length);
    private function setTextInputFocus2(evt:Event):void{
    textinput2.setFocus();
    textinput2.setSelection(textinput2.text.length,textinput2.text.length);
    ]]>
    </mx:Script>
    </mx:Application>

  • Why doesn't the poster image show up as the first frame of my movie?

    I am new at this and maybe misunderstand the Help screen. I have a bunch of short movies which I have laid out in iWeb and published to my iDisk. I want them to load with a still image from the movie rather than show up as a black frame. The meager Help info says to drag the playhead to the desired frame and then Set Poster Frame. I have done that and saved the file and then brought that into iWeb. But then the movie loads with the start point at that frame instead of at 00:00. If I do a Set Poster Frame and then pull the playhead back to zero and save it simply loads a black box again.
    What step am I missing or I am using the wrong procedure altogether?

    Try to check here.
    http://docs.info.apple.com/article.html?artnum=303593
    http://www.mac.com/1/learningcenter/Modules/LHTSolve_t4.html

  • Iphone ios5..I upgraded to ios5 on my iphone 4 and in the demo video on the Apple website it shows a cute animation screen with the user dragging what appears to be balloons on a string how do you access this screen?

    iphone ios5..I upgraded to ios5 on my iphone 4 and in the demo video on the Apple website it shows a cute animation screen with the user dragging what appears to be balloons on a string how do you access this screen?
    Not sure if this is a game or app or not...it shows nothing about it and explains nothing about it...but it is there on the demo video on the apple website for the add to upgrade to ios 5...it shows the user dragging threads and the little icon monster at the bottom of the screen catches them

    Yea thats a game called "Cut the Rope" and it can be found in the App Store for $0.99 or you can buy the Lite version for free.

  • My Ipad 1 is not working. when i put it for charging it shows blinking apple logo

    I have Ipad-1 with OS 4.2.
    As my i pad sutdown even when it was showing remaining battary as 45%. When I tried to restart it was not getting restrated. I put it on charging and tried to reboot by pressing on-off switch at top and home button. Now I pad is not getting started, it is just showing blinking Apple logo. When I tried to hold home button it was showing to connect to i-tunes.
    Now I connected my ipad with computer and it is not showing blinking apple logo of conection option with i-tune. but when i connect it to power socket it shows same blinking apple logo.
    I went to apple service centre in Navi Mumbai (India) and they suggested me to replace the i pad at a cost of INR 18000 (equal to USD 375).
    Please help if I can restart my Ipad without replacement.

    - See if placing the iPad in recovery mode will allow iTunes to see the iPod so you can restore the iPod via iTunes. For recovery mode see:
    iPad: Unable to update or restore
    - Next, try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Last, your iPad needs replacement

  • I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

    I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

    Sounds as if you used Microsoft software to make a PDF. If so, and you didn't use Adobe Acrobat ($$), then you need to get help with Publisher -- Adobe Reader only shows what you make.

  • Video cuts out of frame when importing to timeline :( What to do?

    Hi there!
    So I have my initial video on my timeline and all is well.
    However when I try to import another video with the same frame, it looks like it zooms in because it cuts so much of the frame that I can't even see my face anymore . I even tried viewing it in the preview window on the upper left side (which looks fine) until I drag it in the timeline.
    Photo 1 : This is the initial video
    Photo 2: This is the additional clip that I'm adding that cuts out of frame
    Something I should specify as well is, I recorded audio & video separately and merged them through he merge option that Premiere Pro has but that shouldn't be a problem since I did the same thing with my initial video to sync the audio and it did not cut out of frame.
    I am still new at premiere pro and when I look up tutorials, no one seems to have that problem. Any help?
    Thanks

  • How to show a picture in a frame?

    I've created a class to create some frames and i'm trying to show these pictures on the frames using this class.
    Can someone help me or give me an example?
    Thanks
    Alex

    hi,
    you should override the paint method and then in the paint method do a g.drawImage(image, xPos, yPos, null); where g is a Graphics object, image is an object of type Image, xPos and yPos are the x coordiate and y coordinate locations where the image is to be drawn on the frame.
    eg
    public void paint(Graphics g)
          g.drawImage(image, xPos, yPos, null);
    }hope that helpz
    cheerz
    ynkrish

  • Safari does not load frames triggered from within other frames?

    I am a new to Safari and I like the browser very much. I have run into a nasty problem though, that I was unaware of earlier on when using other browsers.
    Some time ago, I made a website that makes extensive use of frames. The index page is actually a frameset page that loads information into the main frame. Through a basic JavaScript in this main frame, additional information is loaded into other frames on the frameset page. Whenever the user hits a link in the main frame, the JavaScript updates the other frames.
    This has always worked fine in Netscape, Firefox, Internet Explorer and Opera, both on the Mac and Windows platforms. BUT not in Safari.
    Can anybody help me out? What am I doing wrong that Safari refuses to execute what other browsers seem to accept as normal?
    I removed the actual site temporarily, as I don’t want to block off Safari users. Yet I created a very basic mini-site that may explain the problem. This mini-site can be accessed at:
    thttp://www.chem.kuleuven.be/safety/grrrrh/start.html
    Try it out with any of the mentioned browsers and then with Safari and you will see what I mean. To access the code, use one of the other browsers and download the frameset page completely. All 5 documents are truly basic and therefor very short. They only show the principle, no whistles, no bells.
    If this kind of question would not belong to this forum, can anyone point me to one that deals with this type of problems?
    Tx fpr helping me out.
    PowermacG5   Mac OS X (10.4.4)   Safari 2.0.3

    Dear Tom & Andy,
    thanks for taking the time to look into my problem.
    I didn't know Safari is really picky on code, so will remember that for the future. Tx for the suggestion, Tom.
    But things are getting even weirder!
    First of all to set things straight, I am on the same versions of Safari and Firefox as the both of you and tested the minisite in Netscape 7 & 8, IE 5 (Mac) & 6 (Wintel) and Opera 8. As I stated eearlier, none of these have trouble reading and interpreting the "messy" code in www......start.html. Only Safari had.
    But when I access my minisite now via the Internet, Safari renders all frames OK. I can see grey, yellow and pink frames with text, as it should be. So now I see what you see also, Tom. The previous problem, as you obviouslyencountered also, Andy, has mysteriously disappeared. Strange.
    Adding insult to injury, when I download all five files from the minisite (start.html, main.htm, nav.htm, banner.htm & Frames.js) and put these in a folder on my local disk, the problem resurfaces again when I click start.html.
    Adding a DOCTYPE statement to the start.html file on my hard disk does not help either.
    Firefox and the other browsers mentioned still do a perfect job rendering the framepage from the downloaded content irrespective of whether the DOCTYPE statement is present or not. Only Safari refuses.
    The only difference I can see between the www....start.html filee and the one from my hard disk is the way I access them: via http or straight by double-clicking.
    I am still (and even more) puzzled.

  • Cut and Paste: Frame and Content Size Auto Changes

    I'm working in InDesign CS2 and am having this reoccurring problem.
    When I cut and paste frames with placed images (or pull images from a library) the frame and image will both expand to between 300%-3,000%. As you can imagine, it's very frustrating to have to create new frames and place new images every time. Any suggestions on how to fix or work around?

    I'm still having problems with this, even using Paste and Match Style.
    My table has three rows with gray background, then three rows of white; this pattern repeats for many rows. In the center row of each three rows is some text, while all other rows are blank. I want to move all this text down three rows, so that the text that was in the center row of the gray rows now is in the center row of the white rows, but I want the row colors to remain unchanged. Here's what I've tried.
    If I "Cut" the selected cells, then the background colors are cut, so this is no good. Instead, I Copy the cells, then hit the Delete key. This leaves the background alone. Now I select a cell three rows down from the top. If I Paste, then the old backgrounds are pasted in, which is not the behavior I want. If I Paste and Match Style, then all the backgrounds are overwritten with white, except those single rows that originally contained both text, and had a gray background. The original cells that were gray but had no text are pasted in as white.
    This latter behavior makes no sense to me. There seems to be a difference in how Paste and Match Style works, depending on whether the copied cells had text, or were blank.
    Is there another way to do this rather common task—moving text around a table that has alternating-colored rows, without messing up those colors?

  • Adobe premiere cutting between the frames

    Hy there und hallo
    English:
    I'm working with Adobe Premiere and Adobe Encore. Sometimes the timehead is between the frames (between 2 single frames!!!). Actually that's not possible, but I'm not the only one with this problem. My co-worker had the same problem on a different computer. And Adobe Encore is not better in this way. Now, I have a project in Encore and i want to make the sequenz shorter. I can make it shorter with no problems, but the video gets cutted between the frames like in premier sometimes. I was looking for that problem in the internet, but i found nothing. Does anyone know how to shoot this prob? Thanks for every answer...
    Deutsch:
    Ich arbeite mit Adobe premiere und Adobe Encore. Ich hatte öfters das Problem, dass premiere zwischen den Frames den Timehead hinsetzt (Zwischen 2 einzelnen Frames). Das geht doch gar nicht. Ich bin nicht der einzige mit diesem Problem. Mein Mitarbeite hatte das selbe Problem an einer anderen Workstation. Adobe Encore ist auch nicht besser in dieser Hinsicht. Zur Zeit habe ich ein Projekt mit Encore. Wenn ich im Schnittfenster die Sequenz etwas verkürzen möchte, dann springt das Video nicht auf einzelne Frames, sondern dazwischen. Ich habe im Internet schon nach Lösungen gesucht und nichts gefunden. Kann mir jemand helfen? Für Antworten bin ich sehr dankbar.

    with encore i always had 24 fps.
    Yeah, but the Encore timeline assumes a 30 fps time base.  Either your 24p original has the 3:2 pulldown it in already, making it truly 30 fps, or it has the appropriate flags inserted, which makes Encore treat it as 30 fps.
    I don't think there's any way around that with Encore.  It's just the nature of the NTSC beast.

  • I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

    I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

    Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
    For Home Sharing to work you need to
    File > Home Sharing > Create Home Share.
    You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
    Home sharing will then work

  • Adding listeners for instances on other frames

    I'm trying to create a very standard menu, the type where there are links on each page that links to each other. So far I've put each menu page on a separate frame (total around 35 frames), and each link as its own instance/class. Originally I planned to create an array containing all the links like this:
    var menuLinks:Array =
                                //Main menu - frame 1
                                menuRightSide.newStoryLink,
                                menuRightSide.continueStoryLink,
                                menuRightSide.selectChapterLink,
                                menuRightSide.optionsLink,
                                menuRightSide.charactersLink,
                                menuRightSide.aboutLink,
                                //chapters menu - frame 2
                                menuRightSide.chapter1,
                                menuRightSide.chapter2,
                                menuRightSide.chapter3,
                                menuRightSide.chapter4,
                                menuRightSide.chapter5,
                                //characters - frame 3
                                menuRightSide.char1,
                                menuRightSide.char2,
                                menuRightSide.char3,
                                menuRightSide.char4,
                                menuRightSide.char5,
                                menuRightSide.char6,
                                //options - frame 4
                                menuRightSide.languageLink,
                                menuRightSide.costumeLink,
                                //function links - these exist on MULTIPLE frames/pages, eg options, characters, chapters all have backToMainLink
                                menuRightSide.backToMainLink,
                                menuRightSide.backToCharLink,
                                menuRightSide.backToOptionsLink,
                                menuRightSide.backToCostumeLink,
                                ]; //create array of links for menus
                currentPage = "main_menu";
                for each (var links:MovieClip in menuLinks)
                    links.buttonMode = true; //set links to behave like button
                    links.mouseChildren = false; //mouse over does not affect this instance's children
                    links.addEventListener(MouseEvent.ROLL_OVER, onOver);
                    links.addEventListener(MouseEvent.ROLL_OUT, onOut);
                    links.addEventListener(MouseEvent.CLICK, onClick);
                function onOver(e:MouseEvent):void //apply glow to every link
                    TweenMax.to(e.target, 1, {glowFilter:{color:0xFFFFFF, alpha:1, blurX:10, blurY:10}}); //glow effect
                function onOut(e:MouseEvent):void //remove glow on link on mouse out
                    TweenMax.to(e.target, 1, {glowFilter:{color:0xFFFFFF, alpha:0, blurX:0, blurY:0, remove:true}}); //remove glow
                function onClick(e:MouseEvent):void
                    currentPage = e.target.name;
                    if (e.target.name == "newStoryLink") { //if click newStoryLink
                        delegate.beginStory();
                    } else if (e.target.name == "optionsLink") { //if click optionsLink
                        TweenLite.to(menuRightSide, 0.2, {alpha:0, onComplete:menuRightSide.gotoAndStop, onCompleteParams:[45]}); //go to frame 45, options screen
                        TweenLite.to(menuRightSide, 0.2, {alpha:1, delay:0.2});
                    } else if (e.target.name == "charactersLink") { //if click charactersLink
                        TweenLite.to(menuRightSide, 0.2, {alpha:0, onComplete:menuRightSide.gotoAndStop, onCompleteParams:[10]}); //go to frame 10, char screen
                        TweenLite.to(menuRightSide, 0.2, {alpha:1, delay:0.2});
                    } else if (e.target.name == "aboutLink") { //if click aboutLink
                        TweenLite.to(menuRightSide, 0.2, {alpha:0, onComplete:menuRightSide.gotoAndStop, onCompleteParams:[180]}); //go to frame 180, about screen
                        TweenLite.to(menuRightSide, 0.2, {alpha:1, delay:0.2});
    Basically adding listener for every link, then simply telling AS what to do when I click the link regardless of what page I'm currently on.
    However the problem is I realized listeners can't be added for links that exist on other frames other than frame 1, because they're null I think until AS flips to that frame.
    So does anyone have an idea on how I should code this? Another challenge is some links (the ones at the bottom of the array) exist on MULTIPLE frames, but perform the exact same thing regardless of which page it was clicked on.
    Thanks.

    I arranged them on separate frames because that way I know exactly what's on each page. If I simply list out all the links on one frame, then it gets extremely messy visually.
    So if I want to add listeners on other frames, how would I do that? I know the pseudo-code:
    on frame 1:
    for (each link on frame 1) {
    link.addEventListener()
    on frame 2:
    for (each link on frame 2) {
    link.addEventListener()
    ... etc
    function onClick(e:MouseEvent):void
                    currentPage = e.target.name;
                    if (e.target.name == "newStoryLink") {
                        delegate.beginStory();
                    } else if (e.target.name == "continueStoryLink") {
                        //do something else

Maybe you are looking for