Transition not 'sticking' to end of timeline

I am able to drag my 'Cross Dissolve' into my movie in between segments, but I dont seem to be able to stick it onto the end of a segment (but I can sometimes). I can't work out why it works in some clips and not in others?!

The only other thing that might be going on is you are trying to add a transition to the end of a connected clip. You can't do that; it has to be part of a storyline. If this is the case, convert the clip into a secondary storyline and then apply the transition in the manner Tom describes.

Similar Messages

  • Transitions not sticking to images

    Im trying to link two photos with a trasition (page peel to be exact) but for some reason, they're not taking it. It's as if there's a blank space between them, so the transition only sticks to one of the photos and the blank space. This has been happening often and I am positive that there is no blank space between images.
    What does this mean and how can I fix it?

    Im not exactly understanding what this information is (been editing for hours and Im very tired!) but Im pretty sure my problem isnt exactly addressed here. It says that a possible problem might be that the two images dont last long enough for the transition to work, but I've been able to link them before. Suddenly its just not taking.
    Also the site talks about an X? Im not getting that at all, just that when I drag the transition over the two images, half of it kind of hides behind one of the images.

  • Premiere video blocks do not stick

    Hello,
    Since i last updated my premiere pro cc, the video blocks on my sequence timeline do not "stick" anymore. This "sticking" used to happen when i dragged a video block near the end of another video block. I have searched through all of the settings, but I have not been able to find any settings regarding this.
    This issue has been very annoying for me, since this feature is very important for fast editing work.
    Thanks in advance for any answer,
    Jasper

    snap?

  • I created a movie in elements 11, now the cti will not stop at end point, how to fix this?

    I created a movie and now the CTI will not stop at end point. How to fix this?

    Timeline too long (orphans) http://forums.adobe.com/thread/652216?tstart=30

  • Energy saver settings do not stick when set in system preferences

    For some reason when I restore the default settings for the energy saver settings, the settings go back to a custom setting I set months prior of Display Sleep at 1 minute.
    Here is what I am doing:
    Going to "System Preferences"
    Going to "Energy Saver"
    Pressing the button "Restore Defaults"
    Everything goes back to the default settings of Computer Sleep of 10 minutes and Display Sleep of 10 minutes and I close the window out.
    Problem happens: A bit later I come back to my iMac and wake it up, the setting is back to 1 minute of Display Sleep (which I did months ago, I no longer want that).
    I have even locked the setting to prevent further changes. Which locks the settings in place like it should I believe. However, once the iMac sleeps and I wake it up in a couple of hours it switches back to the old setting I made months ago, 1 minute of Display Sleep, which I no longer want.
    Thanks in advance for any assistance!

    i have the opposite problem... i would like to use custom Energy Saver settings but they will not "stick." instead they keep returning to the default settings. i followed the advice on this thread, thinking it might solve my problem too. but it did not. any suggestions?
    i had one hunch - that it might have something to do with the file of same name but with ~orig at the end (see image below). should i remove the other file as well?
    thanks!

  • Transitions not applying

    Greetings....
    Gettingmy hands dirty on FCE. Enjoying the creativity but having an issue with transitions. Sometimes a crossfade or other similar transition will not apply accros the end of a clip. This sees to be fairly random. It happens on .mov and .jpg image files. Im at a lose where to start looking.
    Any thought?
    Thanks for the advice.
    Troy

    Thanks for the reply. Are the handles part of the clip before the transition is added? or part of the transition?
    How do I look at a clip and see the handles or verify that they are there. I have a few clips in the time line that even away from other clips I cannot put a transition on the front end. I have discovered that if I cut off the beginning of the clip with the blade tool I can then use a transition normally. But Im sure there is something I am doing that is causing this or there must be an easier solution.
    Thanks!
    Troy

  • How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

    Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
    In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with  Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
    to Public URL = "proxy URL".
    In Host Named Site Collections,  alternate access mappings  are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
    URL is associated.  This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
    point HNSC to respond  to a different URL(proxy URL). Consequently, Share Point URLs are exposed to  external users.
    Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If  hiding the internal Share Point URLS is a requirement,
    it suggests to use a web application instead of host named site collections.
    Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
    http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
    Excerpt from above article-
    "Host Named Site Collections Only Use One Host Name
    Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
    are always considered to be in the Default zone.  This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
    as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
    calls to the same URL.  If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

    Hi Satish,
    You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
    It is by design that each host-name site collection only support one URL for each zone.
    The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
    https://support.microsoft.com/en-us/kb/2826457
    So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • After I updated to ios5 my calendar did not bring in dates and when I began re-entering dates after one or two it froze up and after I got it going again it will not populate an end time on the same date and will not save the appointment as a consequence.

    After I updated my Ipad2 to IOS5 my calendar lost all appointments.  After re-entering a couple of appointments it froze.  After getting it going again, the calendar will not populate an end date for the current day and consequently I can't save the appointment.  Is this a common problem as I have just purchased this ipad and the calendar function is very important to me.

    Hmm... It looks like they are gone forever now then. I can't think of any other way of getting them back apart from restoring from an iTunes or iCloud backup. Somebody else might be able to help but I think they're gone forever. I don't know why they were wiped from your iPod but it could be something to do with security. In the future I would recommend syncing to iTunes or iCloud to prevent it from happening again. You can always make a reservation at the Genius Bar and see what those guys can do because it seems that they are still there, they are just 'hidden' from view. http://concierge.apple.com/reservation/gb/en/techsupport/
    Cheers,
    Khal
    P.S I'm sorry for the late reply

  • How to add a code so my drag and drop movie clip will not stick  once it is dragged to final place o

    Hello all and kglad, I have to use the old drag and drop code on my movie clips, but the problem is when I drag the movieclip to the area on my .swf file once i release it, it sticks to the hand mover.
    I am encloseing the action script I am using could someone or kglad tell me what is missing from the code so that once it is released it will not stick, see code below
    circle.onPress = function(){
    startDrag(this);
    circle.onRelease = function(){
    stopDrag();
    I am desparate for help on this must get project ready for this afternoon
    Seal55

    there's nothing wrong with that code but it would be better to use:
    circle.onPress = function(){
    this.startDrag();
    circle.onRelease = function(){
    this.stopDrag();
    but that won't solve your problem.  there must be something else going on like a depth issue.  you may need to use swapDepths() to bring your circle under the mouse when releasing.

  • Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

    Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

    I have this issue.  Album artwork was totally fine before.  After this update, it is all messed up and even got messed up when transferred to my iphone.
    iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
    Please fix!

  • Safe mode display settings not 'sticking' after restart?

    Hi
    I used a display setting not supported by my Mac mini and consequently had a 'out of signal' error on my monitor and restarted in safe mode, logged in and altered the settings.
    When I restart the display settings do not 'stick' and I get the same error. How do I get the settings to stick? Have tried logging in as administrator and user with no joy!
    Thanks Nigel

    Hmm. Maybe that combination of changing resolution in Safe mode and resetting PRAM have a combined effect of some kind? Worth remembering for the future. Thanks for posting.

  • Timeline usage : To display value at the end of timeline values

    Hi Team,
    In my current project, I want to implement functionality given below. All records are present in one single table.
    Table has columns as (City,Date,Positive,Negative,CountOfItems)
    I have created data model as given below.
    I need to design Power View Report for which Date will act as "Timeline", so when I select DAte as "2010-10-01" to "2010-11-01" then It should show me report having data on "2010-11-01 because it is latest data I am having.
    Final report should look like as below.
    But as I have used "Sum" function, it shows me wrong result.
    My actual meaning is that, on every date of selected window in timeline, value at the last day of selected window should be displayed at report.
    Can anyone help me to do db design and report formulation.

    It looks like this was answered in your other thread...
    Display value at the end of timeline range selection: http://social.msdn.microsoft.com/Forums/en-US/sqlkjpowerpivotforexcel/thread/20ce91d4-9cc1-4680-be71-6172c64e4da7/#20ce91d4-9cc1-4680-be71-6172c64e4da7
    In the future, please try to avoid creating multiple threads for the same problem :)
    Regards,
    Michael
    Please remember to mark a post that answers your question as an answer...If a post doesn't answer your question but you've found it helpful, please remember to vote it as helpful :)

  • Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

    Link does not work for
    End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
    How do we get Cisco to fix?
    see attachment

    Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
    Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

  • Mouse pointer does not stick on fader when moving it

    Using Logic Pro 9. If I grab any fader, the mouse pointer turns into a small dot. If I then drag the fader up or down, the dot does not stick on the fader. Instead, I find I have to drag the dot well above or below the fader to make big adjustments. Is there any setting to control this? Or is this just how it is in Logic. In all other audio applications I've seen, the mouse pointer sticks on the fader when moving it up or down.

    No - haven't found a fix for this yet. I can only guess that maybe it wasn't as noticeable when display screens weren't so big. I'm running on a 27" iMac so the effect is quite pronounced. I supposed it could be argued that it gives you a finer grain of control to make small changes - but it really takes away from the 'feel' like you are moving a real fader.

  • Mail preferences not sticking

    I access iCloud email via the web when I'm at work (Win XP SP3 + latest release of Chrome).  Recently (as in over the past couple weeks, give or take) my preferences (not showing images in HTML email, default email address for sending, show BCC, etc.) are not sticking permanently.  Sometimes I make/save the changes and they stay for days; other times (like this morning) they don't even stay set for an hour.  My rules are always there, but the other preferences need to be reset periodically -- and seemingly randomly -- to their default values.
    I have deleted all cookies, cleared the cache, etc.  I have not tried another browser because (1) it could be days between "resets" and I don't want to have to use another browser for that long just for troubleshooting and (2) I need this to work in Chrome, so whether it works in another browser is more or less moot.  No matter what troubleshooting steps I've taken, the problem recurs unpredictably.  It is very frustrating because I have to keep a constant eye on the "From" address when replying or sending new messages to mailing lists I'm on (which reject messages from the address that iCloud defaults to), plus with the option defaulting to "On" to show images in HTML email, I'm opening myself up to even more spam than usual.
    So two questions:
    Is anyone else having this same issue?
    Why are these preferences apparently stored in cookies rather than persisting on Apple's server?  Or if they ARE on Apple's server, why do I have to keep changing them back periodically?
    Thanks,
    Brent

    As follow-up, just since I posted this message and without reloading the iCloud tab, restarting the browser, or anything like that, the preferences have once again reverted themselves less than an hour after I changed them.

Maybe you are looking for