Transition of slides go to blank screen instead of next slide

I can't figure this out. I have the transitions set up and when the transition happens instead of going to the next slide with photos and words I get what looks like a blank slide. Same color as the background for the next slide but no content. If I continue to advance the slide, I eventually get the next slide. It's almost like there are extra blank slides in between my 2 slides. This is happening with a number of my slides. I am wondering if it's because I duplicated certain slides, then deleted the content and added new content to that slide. Does the duplicated slide show up as a blank slide? what's going on? Please help!

Thank you for your suggestion. I think I know what happened. I took existing blank slides (no themes) that I had text boxes on and I duplicated them because I wanted the exact background to the new slide but not the text. I deleted the text from the duplicated slide and built my new slide on that background. Apparently, that's where the issue began.
I created new slides by deleting text/images from old slides because I was having difficulty getting the master slide to show up. I would open my master slide viewer, select the master slide I wanted, close the master slide viewer and click on "new slide". I would never get the slide I had just selected from the master slide viewer. It would always be some other slide not the one I wanted. So, to circumvent that frustration, I just duplicated slides that I was somehow lucky enough to create with the correct background (even if they had text/images) and just delete any of the unwanted material. Frustrating.
Thanks again for your helpful suggestions. If I continue to run into this problem I will definitely do as you asked. I love Apple discussion groups. You guys are the best.

Similar Messages

When I close a tab, why do I get a tabless blank screen instead of the view switching to one of the tabs that is open?

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1047350 /questions/1047350]''
Like the title says. I close a tab I'm done with, and I get a tabless white screen instead of it switching to a tab that's already there. I also get a blank page new tab along with previous ones when I start up firefox. Likely started after updating, but I can't be sure.

On the about:newtab page in the upper right hand corner, is there an option to change the blank page to Classic or another option?
Does this happen in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]

Blank screen instead of photo

Taken photos with phone which show in album but when I click specific photos or try to send them it's just blank white screen?checked in photo stream and it's white blank screen there too

Denny
The following is from a person and not a device generated generic reply.
1. This is not Adobe, Rather user to user. We are all visitors here.
2. Your description of "Elements 12" sounds like you are working with Photoshop Elements 12 (photo editor) and not Premiere Elements 12 (video editor). Somehow your thread got posted in the Adobe Premiere Elements Forum. You have posted in the wrong forum. You want the Adobe Photoshop Elements Forum. Please see link.
Photoshop Elements
3. You can re-post your thread at the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
4. Be prepared to give more details....are you working from the Elements Organizer 12 and selecting photos from there to edit in the Editor and then send them back to the Elements Organizer or other?
ATR

Getting blank screen instead of login screen for HFM

Hi,
i am trying to login into HFM, once i click the launch application, i am getting the Blank screen? i am not getting the login screen.
what is the possible reason for this error?
Thanks in advance
Kiran

Are you able to see the log in screen of Shared Services?
Rgds
Payous999

Getting blank screen instead of login screen for workspace

Hi,
i am trying to login into workspace, once i click the launch application, i am getting the Blank screen? i am not getting the login screen.
what is the possible reason for this error?
Thanks in advance
Kiran

Hi John,
Thanks for response.
if proxy settings are wrong not able to connect to any web related or we can not access only particular?
john, is there any chance java related problem for getting blank login popup browser.
Thanks in advance

ESS/MSS on SAP Portal Blank screen instead of IViews.

Hi,
ESS/MSS roles are visiable on portal but when I assigned it to my own user I could not see the iViews we are getting blank screen please screen.
Please help us.

hi,
you need to create user in the backend system and you need to map user in backend using SSO by either logon tickets or User mapping.
if you have not created user then to create user in backend follow following steps:
Please follow this steps to setup ESS/MSS in Portal.
Configuration Settings for ESS
Create Infotype 0105 for all Employees
Use
To link a user in the portal to the employee in the backend, the employee master records must be extended. The portal user information is stored in the backend in the communication infotype 0105, subtypes 0001 (System User Name SAP System (SY-UNAME)) and 0010 (E-Mail).
Prerequisites
u2022 The users MANAGER and EMPLOYEE are mapped to the relevant portal users, ideally by SSO, so that they have the same name.
u2022 You must have created personnel numbers in the SAP system for the relevant employees.
u2022 The following roles are assigned to your ERP user which should be mapped to the employees: SAP_EMPLOYEE, SAP_EMPLOYEE_ERP, and SAP_EMPLOYEE_ERP05. The latter is a composite role for all country specific functions. You can select only the specific country role for your user and delete the other roles.
Procedure
1. Choose the following:
SAP Easy Access Menu Human Resources u2192 Personnel Management u2192 Administration u2192 HR Master Data u2192 Maintain
Transaction PA30
2. Enter your employeeu2019s personnel number
3. In the direct selection section, enter infotype 0105 and choose the Create button.
4. In the subtypes for infotype u201CCommunicationu201D dialog box, select 0001 and then Enter.
5. In the field ID/Number, enter the ID used to log in to the portal
6. Save your entry.
7. Return to the Maintain HR Master Data screen.
8. Keep the infotype 0105 in the infotype field and choose Create.
9. In the subtypes for infotype u201CCommunicationu201D dialog box, select 0010 and then Enter.
10. In the ID/Number field, enter the email address and save your entries
11. Repeat steps 2-10 for employee 91000067. ID/Number MANAGER.
also Jco connection needs to be configured..
Regards,
Jigar Oza

What causes a blank screen instead of the log in screen

What would cause a blank screen when turning on desktop?

On the about:newtab page in the upper right hand corner, is there an option to change the blank page to Classic or another option?
Does this happen in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]

InDesign CS4: Blank screen instead of new page

When I open up a new document in InDesign, 3/4 of the time I do not get a white page/workspace. I get the same grey blank screen present in the back of normal page layouts. I see my tools and other windows, and I can "work" - but nothing shows up. When I close out of the 'ghost' document, I am asked if I want to save changes - so something is being recorded.
Sometimes it works fine and I get a normal page layout.
This is a new version to me - I bought an educational copy of CS4.
Thanks for any insight/suggestions.
Quite Emily

Something is really wrong. What is the OS?
The first bit of trouble-shooting to try is Replace Your Preferences

Attempt to open links from our bank or utility company to view bill. etc. gets only a blank screen; instead of a url the address bar reads "About: blank"

We signed up for on-line billing from our utility company; when I log into their website and click onto the link to "view my bill" Firefox opens a new tab, but nothing loads on the screen; the "address" bar near the top of the screen where you'd usually see the url for the tab reads simply "About:blank" . I have the same issue with messages received from our bank, which are usually sent as .pdf files. I frequently open .pdf files from other sites without any problems, so my copy of Adobe Reader seems to be working okay.
Any suggestions greatly appreciated.

We signed up for on-line billing from our utility company; when I log into their website and click onto the link to "view my bill" Firefox opens a new tab, but nothing loads on the screen; the "address" bar near the top of the screen where you'd usually see the url for the tab reads simply "About:blank" . I have the same issue with messages received from our bank, which are usually sent as .pdf files. I frequently open .pdf files from other sites without any problems, so my copy of Adobe Reader seems to be working okay.
Any suggestions greatly appreciated.

When I click a link within a site, Firefox connects me to a blank screen instead of to the page/document I was trying to get to. Why?

Let me give you examples:
1. The USAA website told me to click a link to get my new insurance card. With Firefox, I was delivered to a blank page; with Safari, to my new insurance cards.
2. Within my bank's website, I clicked the tab to get a statement. Firefox delivered me to a blank page.
3. The email from the soccer association said click to register. Firefox delivered me to a blank page; Safari brought me to the registration page.

This can happen if the disk cache isn't enabled (see about:cache) or otherwise the page isn't in the cache.
If possible then try to open that video in a new tab with a middle-click on the link or via the right-click context menu.<br />
Then you can close that tab instead of using the Back button to go back to that page.

My adobe reader pulls up blank screen instead of forms

need to print forms from pdf pulls up blank page with an x in corner already installed new version and update

Thank you for your help. I contacted Kodak online chat and they couldn't figure it out. I also used nitro pro 8 (another PDF maker) and I can see the actual file pic preview (not as icon, icon shows up @ bottom of pic but I can actually see the picture).
Also, to "Pat":
i saved them as PDF (searchable). i set the display as detailed thumbnails already - still issues. i also changed a few things, and this was the process:
opened file explorer ("My COmputer")
Selected "view" category
"options" ---to sub-category: change folder and search options
In folder options, selected "view" tab
And in advanced settings, Under "file and folders"
Display file icon on thumbnails
i turned it off then, i selected "apply to all folders", i closed file explorer, scanned somethg & went back to file explorer & it was still showing up as adobe icon, no picture of actual pic of item i scanned.
thank you both. is it a WINDOWS 8 issue?

Blank Screen after start-up chime, won't start

I'm rather perplexed as to what's happened to my PowerBook. I'll run throught it
PowerBook 12" 1.33 768
Background:
I've just updated it to 10.4.4, which caused it to get stuck at the Apple symbol and spinning wheel. I had to restart in single user mode and run applejack, restart again and it was fine.
Recently the PowerBook started to not wake from sleep, I'd have hold down the power button then restart it. I thought it had done teh same thing today, but this time it makes the start-up chime but gets no further than a blank (dark, black) screen.
I tried inserting the Mac OS X CD and start up holding down the C key, but still same blank screen (with the added benefit that I'm now unable to remove the CD)
I tried plugging it into an external monitor, but nothing.
I've tried resetting the Preference RAM and the PMU. With some limited success. On occasion after resetting the PRAM, turning it off then back on, it starts with something like a extra blow of air from the fan and white blank screen instead of a black one. It then won't turn off at all, the only way is to pull the power and the battery.
I've noticed that when the ac adapter is plugged in and i've the white screen it flashes very quickly, orange.
I tried starting in Tartget disc mode connected to an iMac, the disc doesn't appear.
I tried starting up with an external firewire drive attached, nothing.
I've tried starting holding the keys for open firmware mode, nothing.
I've removed the AirPort card, no change.
I removed the extra 512mb RAM with no change.
The screen is clearly working, has anyone any ideas how to get it started?
Any help would be appreciated, it's a second hand PowerBook and so has no AppleCare.
Cheers
Stuart

I had the EXACT same problem happen to me, Stuartea71. My PowerBook crashed on the on Feb. 4th and I still can't figure it out. I had just dowloaded the 10.4.4 update, bought iLife 06, and ordered a new battery.
I tried every single thing that you did above. I finally called customer support, and walked me through a few things which I had already tried, but she finally pin pointed something in disk utility that I missed. My disk would not mount. In red letters it said "failing." She told me that was a internal HD problem that needs to be fixed by a certified tech.
I did something I'd never done before. I put my HD to sleep to optimize battery performance. I work with podcasts and downloaded a large file. Unfortunately I forgot my battery setting. I chalk it up as a lesson learned, and just bit the bullet and ordered a MacBook Pro.
BTW... if you all customer service they basically read directly from the Apple Website. I paid $49 dollars for someone to tell me my mac was broken and send it in.

Report Viewer goes to a Blank Screen

Post Author: DHitten
CA Forum: JAVA
I'm attempting to implement the Crystal Reports XI JRC and can get it to succesfully render the report and all the associated tool bars, as well as preform the functions that the tools do. The Issue I'm having is that when ever I click the export button, or the print button and do the associated steps to do those things and I go back to do something else with the generated report, the report will always go to a blank screen instead of doing the selected action. I create the CrystalReportViewer object inside a servlet and when I do the above it dose go back to the servlet. My qustion is dose any one know why the viewer will only let you do one tool action (Print or Export) and not do the other after? Is there a way to get around it or am I missing something in my code Much AppreciationDustin Hittenmiller

I've also run into this issue. I got my phone in Feb 2015. Also iphone 6 (64GB). It's happened during calls and when I tried taking a photo. The screen basically goes black but the phone is still on and responds to buttons. It's happened to me twice in the past month or so. Each time, I've just had to wait for a few mins and the screen becomes lit up again.

Update notification shows there are updates but when I click on the update option it shows a blank screen

The update option on the app store shows a notification that I have 'n' numbers of updates but when I click on the update option it only shows a blank screen. Even after updating the apps individually from the purchased option, the update option still shows a blank screen instead of "All you applications are up to date". Please help.

Many people are having this problem for the last couple of days. According to Fly150in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

Tilda blank screen

Hi,
After upgrading to the latest version of Tilda, I get a grey blank screen instead of the console when opening it.
Downgrading solves the problem (of course). I tried using it with and without xcompmgr and on different computers (nvidia drivers and intel video drivers) and have the same issue.
Apparently some people had similar trouble six years ago (https://bugs.launchpad.net/ubuntu/+sour … bug/144175), but their solution (disabling animated pulldown) does not work.
Cheers.
Last edited by Tesbed (2013-08-10 09:57:21)

Then I don't know. Which WM/DE do you use? I use Xfce with compositing enabled. Here is my ~/.config/tilda/config_0, try if you get the error with this configuration. Maybe we’ll manage to find another buggy option.
tilda_config_version = "1.1.7"
# image = ""
# command = ""
font = "Monospace 10"
key = "F12"
addtab_key = "<Shift><Control>t"
fullscreen_key = "F11"
closetab_key = "<Shift><Control>w"
nexttab_key = "<Control>Page_Down"
prevtab_key = "<Control>Page_Up"
movetableft_key = "<Shift><Control>Page_Up"
movetabright_key = "<Shift><Control>Page_Down"
gototab_1_key = "<Alt>1"
gototab_2_key = "<Alt>2"
gototab_3_key = "<Alt>3"
gototab_4_key = "<Alt>4"
gototab_5_key = "<Alt>5"
gototab_6_key = "<Alt>6"
gototab_7_key = "<Alt>7"
gototab_8_key = "<Alt>8"
gototab_9_key = "<Alt>9"
gototab_10_key = "<Alt>0"
copy_key = "<Shift><Control>c"
paste_key = "<Shift><Control>v"
quit_key = "<Shift><Control>q"
title = "Tilda"
background_color = "white"
# working_dir = ""
web_browser = "x-www-browser"
word_chars = "-A-Za-z0-9,./?%&#:_"
lines = 100000
max_width = 806
max_height = 388
min_width = 1
min_height = 1
transparency = 15
x_pos = 0
y_pos = 0
tab_pos = 1
backspace_key = 0
delete_key = 1
d_set_title = 3
command_exit = 1
scheme = 3
slide_sleep_usec = 20000
animation_orientation = 2
timer_resolution = 200
auto_hide_time = 2000
on_last_terminal_exit = 1
palette_scheme = 1
show_on_monitor_number = 0
palette = {0, 0, 0, 43690, 0, 0, 0, 43690, 0, 43690, 21845, 0, 0, 0, 43690, 43690, 0, 43690, 0, 43690, 43690, 43690, 43690, 43690, 21845, 21845, 21845, 65535, 21845, 21845, 21845, 65535, 21845, 65535, 65535, 21845, 21845, 21845, 65535, 65535, 21845, 65535, 21845, 65535, 65535, 65535, 65535, 65535}
scrollbar_pos = 1
back_red = 0
back_green = 0
back_blue = 0
text_red = 65535
text_green = 65535
text_blue = 65535
scroll_background = true
scroll_on_output = false
notebook_border = false
antialias = true
scrollbar = false
use_image = false
grab_focus = true
above = true
notaskbar = true
bold = true
blinks = true
scroll_on_key = true
bell = true
run_command = false
pinned = true
animation = true
hidden = false
centered_horizontally = false
centered_vertically = false
enable_transparency = true
double_buffer = true
auto_hide_on_focus_lost = false
auto_hide_on_mouse_leave = false

Transition of slides go to blank screen instead of next slide

Similar Messages

Maybe you are looking for