TRANSITION PROBLEM---won't work properly

I am doing a short 3 minute piece and all of a sudden my transitions do not work correctly. the piece is nothing but footage from my camera...and some photos...the photos have transitions in between them, and this was done without any problem, now i can't add a transition correctly, I get a small bar...and its under a seconds time...even when I add more time to the transition, I don't get a different result....I saved the fcp pro file to one of my external (fire wire) drives...I need help with this

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

Similar Messages

Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

Read A fix via Virtual XP
http://forums.adobe.com/thread/702693?tstart=0

Iphoto9 won't work properly in Snow Leopard

On my Macbook (2008) iphoto9 won't work properly in Snow Leopard. What do I do? Upgrade to iphoto 11 or is there another way?
I was happy with iphoto9.

Had a look around the message boards and found this link, has solved the problem.
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

IPOD won't work properly if drive C: is available on your computer

The Windows XP driver for the Apple IPOD USB Device has a bug that makes your system very slow or even hang when you try to connect or eject your IPOD if Drive "C:" is available on your machine. Another symptom is that when you connect your ipod, the computer doesn't automatically launch the ITunes app and it is very slow to open manually.
A typical problem is that if your system has had a hard drive replaced and/or the drive "C" is not assigned for some reason, then the IPOD USB Driver will attach itself as drive "C:" and then it won't work properly seemingly because of conflicts with the Windows OS. Other USB devices never grab drive "C:" but this Apple-supplied device driver appears to think it is OK to use drive C: but then it doesn't work properly.
The fix is to make sure some real (physical) drive is always connected to or mapped to drive "C:" so that the IPOD USB driver attaches to a drive from "D:" and up.
Also try reading: http://docs.info.apple.com/article.html?artnum=93499 for more info.

yeah, the ipod normally gets assigned the f, g, or h drive letters. i don't really know though if windows is responsible for assigning the drive letters to usb devices or the ipod driver. to my understanding the ipodservice.exe only makes sure that itunes can comunicate to the ipod through the drive letter that windows assigns to the ipod. windows is the os and therefore responsible for managinig its drive letters.

Since updating to ios 6 my ebooks won't work properly on my iPad. Skips from first page of a chapter directly to first page of next chapter. I'm very unimpressed

Since updating to ios 6 yesterday, my ebooks won't work properly. They jump from first page of one chapter onto first page of next chapter. Obviously missing all the pages in between. Anyone else having this problem? Help please....

I have a similar problem with Microsoft Visual C# 2010 Step by Step. This ebook worked fine until I upgraded to ios 6.

Keypad won't work properly on 'A'

I need help about my keyboard. i'm using a curve 8520 on 0S5.
My letter 'A' in the keyboard suddenly won't work properly.. Just a soft touch and it would appear automatically... in Uppercase. Because of this, i am having a hard time when typing. i copy paste the lower case 'a' so typing would be easy.
Also, since the 'lock' is also in that key, my phone would always lock automatically and with that... my phone seems to go 'off' and i would have to longpress any key so it would come alive again.
i tried the application clean-up thing in the desktop manager as @BlackberryHelp tweeted me when i asked them about this but still there are no changes.. i also tried putting a tissue in the back of the metal plate thing. i am so worried coz i just got this phone 3 months ago. Please help me about this! Thank you so much.

i managed to unlock my phone by keeping power on, remove battery and presto its unlocked. problem is stil letter "a" in keypad is not working can anyone suggest how to fix it instead of going to a technician?

My iMessage won't work properly on my iPhone4

My iPhone 4s iMessage won't work properly and I don't know why.

I am also getting the message to connect to iTunes to use notifications even though I have notifications turned off for the app???

Why is it that each time I upgrade my iPad, half of my apps won't work properly but worst of all my email won't send after the latest "patch" today, wake up Apple I am a new user and getting sick of this problems

WHy is it that each time I get an upgrade some of my Apps won't work when they did with the previous version. I have just upgraded to v7.01 and now I cannot send email, wake up Apple and get it right as I am a new user of Apple technology and not impressed.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Syncing Phone won't work properly

I sycned my 6131 phone to Outlook (PC has windows 2000) and I had problems! 1) The contacts I deleted in Outlook were still on my phone. 2)The contacts where I updated details in Outlook were added as ADDITIONAL contacts on my phone. Effectively I had certain contacts listed twice, rather than once with updated information. The setting I chose on Nokia PC Suite was to update one way - from Outlook to my phone. Why won't the sync work properly?

2 way sync is what original sync is all about:
1) first phase, 2 databases (this case PC/Outlook and Nokia/Phone, both having phonebook with different data
2) Let's introduce "SYNC", which means that after "sync session" both databses are IDENTICAL.
Then these 1 way sunc's are just some sorry sessions that try to meet a need of a user that has a need that really cannot be fulfilled by sync.
(my opinion only)

10.4.4 - Problem - Widgets not working properly

I installed 10.4.4 last night and now my Widgets aren't working properly.
Some (Mostly third party widgets) simply don't appear on screen unless I go to 'Manage Widgets'.
Others, including Apple Widgets, won't download info from the web, again unless I go to 'Manage Widgets'.
I've tried closing the offending widgets, then dragging them back to the screen, I've also tried using the Manage Widgets Widget.
Is anyone else having a similar problem, and does anyone have a fix?
Thanks
Paul
Mac Mini 1.42GHz 1Gb Mac OS X (10.4.3)

well I have done this update..the thing were right and functioning before....and I can hardly say that they are working now.
I have got this mac recently and I am a begginer...so I don't know where are those permisions....why do I need to check after each update..the permisions and who knows what else ...I left behind a stupid win....s operating system and here I am.... .......well it is very sad ... and discouraging.

Photoshop elements uploader to facebook won't work properly.

Photoshop Elements 11 gives the opportunity to share pictures with facebook.
The facebook uploader doesn't work for me. Uploading in high resolution won't work at all. But even in standard resolution, the following problems occur:
1) uploader does not recognise albums in facebook, and
2) worst of all: uploades images won't be visible to friends, unless they dive into yout profile. I mean: in the uploader window i choose: visible to friends. When i log on to facebook, the images are there, but they are tagged as privat. Untagging them to 'visible for friends' won't help.
What am i doïng wrong (PRE11)
While uploading al settings are correct, in facebook settings become different.
Operating system: W7, 4GB RAM, E8600
Browser: IE 9
(i posted this question before, apparantly in a wrong forum

Hello Andaleeb,
Thx for your suggestion to a solution. I'm sorry to say that it doesn't answer (all) my questions. I will try to see what difference matching the settings give, but no mather the result the following question persists:
I have to choose an option: adding to an existing album or creating a new one. Since most of the time i (read: my wive) wants to use the uploader to share some photographs with friends, the only right option seems to create a new album. (I could live just fine without creating an album, but that option isn't available).
So: While creating a new album with the uploader, the uploader is used to set the settings vof the new album. Now the trick: the album in facebook gets different settings.
I would very much appreciate an solution to this particular problem.
Thx for your help in advance.

Ipod Nano won't work properly in my Car's AUX

I had the old ipod before and somehow i lost it. So i decied to buy the new ipod nano but when i connect it to my car's aux , the music won't sound properly there is always a interference and a annoying noise.But the thing is this never happend to me on my old Ipod and it worked perfectly so what should i do please help..

can someone respond please

My Extigy won't work properly with Wi

I have upgraded my PC to WinXP. I have a Creative Extigy with 5. speakers, and on my old PC it all?worked perfectly. With the new computer?the 5. rear?right and left speakers won't work. The others work just fine !?There seems to be no signal coming from the Extigy when I play from Musicmatch Juke box. But if I play something throught MixMeister3 it works just fine. Any ideas what the problem is ? ... thanks ... Roger

hey..actually i have same problem 2 days ago n yesterday my imessage finaly worked..
in my case i use another sim card/not original bundling,then i use my original sim card/carrier, n it instanly worked..
so actually carrier does take the problem..
im sory my english is terrible bad,im from indonesia..thank you

Won't work properly in OSX 10.4

Hi,
My DVDSP 3.0.2 doesn't work properly after i've updated my OSX from 10.3 to 10.4.8
The whole layout is different, drop down menus don't work, and when i try to import an asset the select window flashes up for 1 second then disappears.
Any help would be appreciated, as I need this software for my business,
Cheers
Eoin

Had a look around the message boards and found this link, has solved the problem.
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

Some keys won't work properly on MacBook Air

I've had the MAB for about 3-4months now and i never had this problem. All of a sudden, possibly after updating MAC OS, the keys such as 'r' and '4' and 'v' will not work properly. It is not like they are not working at all, they just show weird keys.
Eg. when i press 'r' 2-3 times, 'IOU' or 'awerq' would show up most of the times. same for v and 4.
anyone had this problem? I tried playing around with the language settings, resetting my keyboard shortcuts, but no luck.
do i have to format my MAB?
Thanks!

anyone???? could it be a hardware problem???

TRANSITION PROBLEM---won't work properly

Similar Messages

Maybe you are looking for