Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?

Hi
Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
I don't think there is any solution to this AT ALL.
When You format a hard disk.
• Select Partitions
• Under the graphic representation to the left there is an Alternative button
Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
No other possibilities.
Yours Bengt W

Similar Messages

HT4623 While in Japan on a trip, I updated my iPhone to iOS6. Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store. How do I do that so I can download and update apps at home in the US

While in Japan on a trip, I updated my iPhone to iOS6. Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store. How do I do that so I can download and update apps at home in the USA?

Your Apple ID is tied to the US store. Log out of the store, then trying logging back in.

HT1311 I have done all of the above but when I try to update my Apps it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

I have done all of the above but when I try to update my Apps on my iphone it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

Error Code 6 on trying to install a previously bought CS4 from an older Macbook Pro to a new iMac.

Iam trying to install my Photoshop CS4 onto my new iMac that I used on an older Macbook Pro that no longer works but when I try to install it I get an error code 6. Any help is greatly appreciated.

Murray,
These illustrate what I'm experiencing.
Image #1 - Shows the template file open and the place it is and always has been saved.
When this template is saved DW does not offer to update the site pages that use this template as expected.
So I attempt to update the pages via Modify:Templates:Update Pages and this is where I encounter the 'error -43' message.
You asked for a file. Please be more specific as to what file or files. Presume you'd want the source code in a text file, correct?
I appreciate you time and interest.
John

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

Trying to download iTunes 10.4.1. I have windows xp. iTunes would not load. I followed the directions from this sight to uninstall everything. When I try to install, I get this message: C:\Documents and Settings\Kelley\Local Settings\Temporary Intern

launch so I am trying to reinstall. I followed the directions from this site about uninstalling and deleting files and making a backup. When I try to
install I get this message: C:\Documents and Settings\Kelley\Local Settings\Temporary Internet Files\Content.IE5\AFYW6D11\iTunesSetup[1].exe is not a valid Win32 application. I click ok. Nothing happens. Any ideas?

Hi - thanks for your help and sorry not to have replied before - I've been away.
I use mainly Chrome but also tried IE8 just in case - no difference. However I finally remembered that when I had a similar problem downloading/installing OS4 for my iPhone (which crashed it and caused total lockup for about 4 days, resolved only after hours of calls to iPhone helpdesk) it turned out that the problem was caused by my home wi-fi connection. When I hard-wired the network connection the problem was solved. I tried it with iTunes - and it installed first time.
Don't know what would cause this problem, which as far as I can see affects only Apple software. Everything else seems to download and install over the wi-fi without glitches.
Best,
John

My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

How can I transfer information from my older MacBook Pro to my new MacBook Pro?

How can I transfer information information from my older MacBook Pro to my new MacBook Pro? Does anyone have an answer because I spoke to 2 people at Apple & both sent me the wrong cables.....

Did they mention Migration Assistant? You can use MA with FireWire, limit is the speed of the older unit. MA will guide you and allow you to choose what to transfer.

When I go to watch a show or movie that I purchased, it will not load. The "loading" screen comes up but it just sits there. There is no problem with my internet connection.

When I go to watch a show or movie that I purchased, it will not load. The "loading" screen comes up but it just sits there. There is no problem with my internet connection.

Hi, did you resolve the 200453 error? I've got the same one and can find very little in the way of information to lead to resolving my issue

HT204074 I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connecto to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed.

I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connect to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed. I still can not connecto to the Store.
My previous machine has Itunes Installed, and I deauthorized the machine so I unlinked to my Apple ID, if this is correct.
Anyway, Dropbox is also not connecting....so I do not know how to make it woek. please help!

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.

I just got my Droid Turbo. Deleted lots of emails yesterday and now not receiving any. When I try to refresh, I get an internal error, but can't figure out why. Any ideas?

I just got the Droid Turbo. I deleted several emails yesterday and now today, I am not receiving any. When I try to refresh, I get an internal error. I have tried turning the phone off and checked my settings as well, but still getting nothing. Any ideas??

I figured it out. Deleted and re-added the account.

HT201263 My iPhone is stuck on the Apple Logo and when I try to restore I get an unkown error (14)

My iPhone is stuck on the Apple Logo and when I try to restore I get an unkown error (14) I dont know where to go from here there doesnt seem to be any other discussions like this

Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

Similar Messages

Maybe you are looking for