Transitions and titles going black when rendered

For the last few months, I have been making some movies in iMovie HD, ranging from 2 min. to a bit over 20 min. long. Most of the content is iMovie08 slide shows imported to iMovie and interspersed with brief video clips taken with still cameras. Have done about two dozen at this point, with only one minor problem prior to the current one. (In that case, when I added subtitles they began to include several extra "trailer" sections, which wasn't a particular problem unless I had another subtitle following closely. Somehow, that resolved itself.)
The current movie was coming along fine. I had successfully added a couple of cross dissolves in the beginning between sections of slide shows and movie clips, then went on to complete the rest of the movie (20 min.) before going back to add the rest of the transitions and some titles. When I tried to put in cross dissolves or overlaps, the preview was correct but when the transition rendered, it became a fade to black followed by a cut. (Have subsequently checked several of the other transitions which I would not likely ever use and they all transition to black as well.) When I tried to put in titles, they also previewed correctly, but rendered over black instead of over the image. Tried all the easy stuff like closing and reopening iMovie, rebooting, making a new copy of the project, clicking the "over black" box off and on a few times. No luck. The only think I did any different in this project from all the others is turn or edit contrast/saturation in two clips in iMovie08 before exporting them back to iMovie HD.
I created a new user account and made a test movie and did not have the problem. Logging back in I deleted the cache and the plist files for imovie. After rebooting i can create a new project and the subtitle and transitions do not go black. The original project still has the problem. I even opened the project package and deleted the cache inside the project.
Has anyone figured out any way to salvage a project that is holding on to damaged preferences?

Did you try logging in on a new account and opening the problem iMovie file in the new account? I wasn't certain from your post whether you did that. Can other trouble free movies be created/played in the old account now that you deleted preferences?
Also, did you do a permissions repair in additiion to deleting the .plist file? You didn't mention that in your list. You should do a permissions repair using the Disk Utility app on your Mac.
Have you added any 3rd party or Quicktime plug-ins lately? These sometimes can cause conflicts. If you have any, you could try moving them to a different folder to temporarily disable them, and see if that solves it.
Make sure that you have sufficient free disk space for iMovie to operate efficiently. 20GB to 25GB is oft recommended on this forum.
Make sure that your Quicktime is updated to current version.
Any new software installed lately that could be causing a conflict?
If the problems are occurring solely in the currrent project, and the diagnostic efforts that you have made don't solve it, then you probably should start over. This is a relatively short movie, so the effort is fairly minimal. Can save a lot of time in the long run. You might be able to clear out all of your titles and transitions and transfer your clips into a new iMovie project with all of the editing still intact. Always make a backup copy of your movie, first.

Similar Messages

Satellite L405D-11V - Freezes and screen goes black when watching video

Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
Thanks

Hi buddy,
Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
What operating system you are using on your Satellite L405D?
To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
In my opinion you should try updating the display driver. Maybe its causing the issue
If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
Explain your problem very detailed. I think everything can be clarified then. :)

IMovie transitions and titles have black behind them

When I first installed iLife, everything worked fine. All of a sudden the titles and transitions have black behind them as if it's not keying right. (eg. the time and date graphic has a black bar behind it that should be there and the comic book look just shows black instead of the video.)
Am I the only person this has happened to?

Hi duff_golf - welcome to the forum!
Firstly, regarding your original post correction - for a short time after posting you can still edit your post. A small icon appears to the left of the other icons on the top right corner of your post. Click on this, edit your post, then click on Edit Message (I think it's called) in the bottom left corner of the Edit screen to republish your edited post.
Now to your problem. The first thing I would do is to close iMovie then delete (trash) iMovie's preference file. It's found in your User>Library>Preferences folder and is named "com.apple.iMovie8.plist". Don't worry, iMovie will create a new .plist file with the default settings when next opened. You may need to go to iMovie>Preferences in the Menu and change some settings to suit your own preference.
Hope this solves your issue. Sometimes the preference file can become corrupted and this can cause iMovie to behave strangely.
John

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

Was updating the latest version of iphone and my phone is frozen. It will not shut off. when I try to shut it off it shows a itunes connection and then goes black.

I was updating the latest version for my I-phone 4s and now my phone is frozen. It will not shut off. When I try to shut it off it shows an i-tunes connection and then goes black.

See http://www.apple.com/support/iphone/assistant/phone/

When i open my macbook pro- the screen lights up and then goes black-

When I open my Macbook pro- the screen lights up and then goes black- keybook stays backlite- can not get screen to come back on. Must reboot-
thoughts-?? Macbook is 6 months old and on second hard drive ( failure after 45 days).

Hey! exact same thing happens to me... I use the keyboard shortcut to turn off the screen which is ctrl - shift - eject button. Then just poke a key and it wakes up again fine, it doesn't fix the problem but at elast you don't have to reboot. x

Screen goes black when coming out of screen saver. HP Pavilion,p7-1414 desktop, windows 8

the monitor shows the windows 8 screen with the apps, then the screen saver will come on. Then when I try to bring it out of the screen saver mode the screen goes black and nothing I do will get it to go back to the windows 8 screen. Then the mouse pointer will disappear. So I end up having to shut down the computer using the power button. If I have the screen set up for the old style windows 7 and it goes into the screen saver and I bring it back there's no problem.
fleamarketlady

Hello fleamarketlady,
Your computer goes black when it comes out of sleep mode some times.
Make sure that you are only using one cable to connect the monitor to the computer.
Open up command prompt and run the following command SFC /scannow.
This will scan the system files and correct any errors that it can.
Here is a link to command prompt.
When you go to open command prompt, right click and run as administrator.
If you are still having the problem you can perform a system refresh.
This will uninstall windows 8 and reinstall it without affecting your personal information.
Here is a link that will walk you through the steps for a refresh.
Let me know how everything goes.
Have a good day.

Adobe Premiere Elements 4-lost transitions and titles

I have been editing a Adobe Pre 4-projects and saved it a couple of times during the last 14 days. Yesterday I moved the whole project file to another disk (external), unfortunately I did not copy and save; I moved it.
Now when I open the project from the external disk, all the transitions and titles are gone. Where have all the transitions and titles gone?

Hi thanks for the response,
So I had adobe PrE 4.0 and downloaded the free trial version of adobe PrE 10 from the adobe site. I opened my PrE 4.0 project file in the trial version to see how it would look and it looked fine but for some reason PrE 10 is extremley slow on my computer and I have an ok computer, and I am not talking about the playback video was choppy, which it was, the editing process on the timeline was so slow and choppy that it was hard to edit properly. The did not move any files and PrE 10 didn't ask me any questions, I just go on it and opened the project file up from the PrE 4.0 file location. So I got rid of the trial version and went back to PrE 4.0 to get back to work on the same project and when I got there the transitions and titles would not work for that project file, however if I started a new file it would work fine (but I do not wish to start all over), when the video got to the titles in the playback video a red screen with the words media offline in several languages would come up and than go away once the title was supposed to be gone. I have the bad/messed up project file on my flashdrive now too. If we can't get this to fix on 4.0 than maybe you could tell me how to fix the PrE 10 because I got that too just in case, maybe you could tell me how to speed it up because it is unbelievably slow, and I have windows 7 64 bit operating system.

Macbook Pro 15" 2010 display goes black when opening PPT

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

IPhoto going black when using the contract tool

my picture goes black when im trying to edit using the contrast tool!
what the heck.. any advise?

Do the other tools work correctly in the edit mode? Try the following: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If that doesn't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

My iPod touch goes black when I try to face time. Can anyone help with a fix.x

My iPod touch goes black when I try to use FaceTime. Can anyone help.x

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>FaceTime and sign out and then sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Adding transitions and titles: no choosing ends of clips?

Hi there,
Does anyone have a clue about the following:
When setting a theme you can choose to tick the box 'add transitions and titles'. According to the tutorial you should get the following options about the end of clips in your projects:
- Overlap ends and shorten clip
- Extend ends etc.
How come I do not have this option? I'm working in Imovie 8.0.6.
Any suggestions? I would like to use these options now and then...

This was an option in iMovie 08, but it was removed in iMovie 09.
The current behavior is that it overlaps ends and shortens the clip. This is the way you would want it to behave for video. After you painstakingly edit out Uncle Joe picking has nose at the wedding, you don't want a transition to put the nose-picking back into your movie. The overall length of the movie stays the same.
For photos, it was useful to have the option of extending or overlapping and shortening. But this is no longer an option as far as I know.

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Transitions and titles going black when rendered

Similar Messages

Maybe you are looking for