Transitions and titles in iMovie 06 create distorted audio

I'm trying to edit together some video and all of a sudden iMovie 06 is making a weird garbled, popping noise over the audio track of the video when it's playing a transition or title. I have absolutely no idea what could have cause this, I have been using the program for a while and this just happened out of the blue. Any ideas would be greatly appreciated. Thanks.

iMovie's preference files can easily become corrupted. I can't say for sure, but that might be your problem. Try closing iMovie and then trashing the file com.apple.iMovie.plist found in User/Library/Preferences. iMovie will create a new preference file upon relaunch. Before relaunching, also do a permissions repair using the Utilities/Disk Utility app on your Mac.

Similar Messages

  • Saving projects with Transitions and Titles - iMovie 3

    Every time I edit a movie in iMovie 3, add transitions and titles, and then save, the next time I open the project, I get a window saying there are x number of stray clips (my transition and title clips) and would I like to move them to the clip panes or leave them alone. Either way, they end up being out of order. Why will they not stay in the edited order that I put them in, even after I hit Save?

    I do Save the projects this way and all the clips show up in the edit panel below the clip frames. BUT, none of the Transition or Title clips stay in the edit panel below. Each time I open the saved project, a message window appears saying that there are x number of stray clips (the Transition and Title Clips). Then it asks me if I would like to leave them alone or put them in the clips pane. If I put them in the clips pane, then I have to once again reposition them where they belong in the edit panel below. This happens every time.

  • Adding transitions and titles: no choosing ends of clips?

    Hi there,
    Does anyone have a clue about the following:
    When setting a theme you can choose to tick the box 'add transitions and titles'. According to the tutorial you should get the following options about the end of clips in your projects:
    - Overlap ends and shorten clip
    - Extend ends etc.
    How come I do not have this option? I'm working in Imovie 8.0.6.
    Any suggestions? I would like to use these options now and then...

    This was an option in iMovie 08, but it was removed in iMovie 09.
    The current behavior is that it overlaps ends and shortens the clip. This is the way you would want it to behave for video. After you painstakingly edit out Uncle Joe picking has nose at the wedding, you don't want a transition to put the nose-picking back into your movie. The overall length of the movie stays the same.
    For photos, it was useful to have the option of extending or overlapping and shortening. But this is no longer an option as far as I know.

  • Adobe Premiere Elements 4-lost transitions and titles

    I have been editing a Adobe Pre 4-projects and saved it a couple of times during the last 14 days. Yesterday I moved the whole project file to another disk (external), unfortunately I did not copy and save; I moved it.
    Now when I open the project from the external disk, all the transitions and titles are gone. Where have all the transitions and titles gone?

    Hi thanks for the response,
    So I had adobe PrE 4.0 and downloaded the free trial version of adobe PrE 10 from the adobe site. I opened my PrE 4.0 project file in the trial version to see how it would look and it looked fine but for some reason PrE 10 is extremley slow on my computer and I have an ok computer, and I am not talking about the playback video was choppy, which it was, the editing process on the timeline was so slow and choppy that it was hard to edit properly. The did not move any files and PrE 10 didn't ask me any questions, I just go on it and opened the project file up from the PrE 4.0 file location. So I got rid of the trial version and went back to PrE 4.0 to get back to work on the same project and when I got there the transitions and titles would not work for that project file, however if I started a new file it would work fine (but I do not wish to start all over), when the video got to the titles in the playback video a red screen with the words media offline in several languages would come up and than go away once the title was supposed to be gone. I have the bad/messed up project file on my flashdrive now too. If we can't get this to fix on 4.0 than maybe you could tell me how to fix the PrE 10 because I got that too just in case, maybe you could tell me how to speed it up because it is unbelievably slow, and I have windows 7 64 bit operating system.

  • IMovie transitions and titles have black behind them

    When I first installed iLife, everything worked fine. All of a sudden the titles and transitions have black behind them as if it's not keying right. (eg. the time and date graphic has a black bar behind it that should be there and the comic book look just shows black instead of the video.)
    Am I the only person this has happened to?

    Hi duff_golf - welcome to the forum!
    Firstly, regarding your original post correction - for a short time after posting you can still edit your post. A small icon appears to the left of the other icons on the top right corner of your post. Click on this, edit your post, then click on Edit Message (I think it's called) in the bottom left corner of the Edit screen to republish your edited post.
    Now to your problem. The first thing I would do is to close iMovie then delete (trash) iMovie's preference file. It's found in your User>Library>Preferences folder and is named "com.apple.iMovie8.plist". Don't worry, iMovie will create a new .plist file with the default settings when next opened. You may need to go to iMovie>Preferences in the Menu and change some settings to suit your own preference.
    Hope this solves your issue. Sometimes the preference file can become corrupted and this can cause iMovie to behave strangely.
    John

  • Clicking on Transition and Title browsers causes '11 iMovie crash and projects/events play audio but no video

    After several years of working fine, my old iMovie started acting funny. Clicking on the Transition or Title browser would cause it to shut down. I just bought/downloaded the "upgrade" to '11 iMovie, 9.0.4, yesterday, and now, not only does it still do the same thing, but the projects or events won't play any video portion, only the audio.
    I'm running 10.6.8 on an iMac

    I seem to be having the same problem. I'm running a mac mini and I have like 5 photos, 1 song, and 2 movie clips (not a lot of stuff) in the movie, and when i go to preview it... I see the pictures, and hear the music... but no video.

  • Transitions and titles going black when rendered

    For the last few months, I have been making some movies in iMovie HD, ranging from 2 min. to a bit over 20 min. long. Most of the content is iMovie08 slide shows imported to iMovie and interspersed with brief video clips taken with still cameras. Have done about two dozen at this point, with only one minor problem prior to the current one. (In that case, when I added subtitles they began to include several extra "trailer" sections, which wasn't a particular problem unless I had another subtitle following closely. Somehow, that resolved itself.)
    The current movie was coming along fine. I had successfully added a couple of cross dissolves in the beginning between sections of slide shows and movie clips, then went on to complete the rest of the movie (20 min.) before going back to add the rest of the transitions and some titles. When I tried to put in cross dissolves or overlaps, the preview was correct but when the transition rendered, it became a fade to black followed by a cut. (Have subsequently checked several of the other transitions which I would not likely ever use and they all transition to black as well.) When I tried to put in titles, they also previewed correctly, but rendered over black instead of over the image. Tried all the easy stuff like closing and reopening iMovie, rebooting, making a new copy of the project, clicking the "over black" box off and on a few times. No luck. The only think I did any different in this project from all the others is turn or edit contrast/saturation in two clips in iMovie08 before exporting them back to iMovie HD.
    I created a new user account and made a test movie and did not have the problem. Logging back in I deleted the cache and the plist files for imovie. After rebooting i can create a new project and the subtitle and transitions do not go black. The original project still has the problem. I even opened the project package and deleted the cache inside the project.
    Has anyone figured out any way to salvage a project that is holding on to damaged preferences?

    Did you try logging in on a new account and opening the problem iMovie file in the new account? I wasn't certain from your post whether you did that. Can other trouble free movies be created/played in the old account now that you deleted preferences?
    Also, did you do a permissions repair in additiion to deleting the .plist file? You didn't mention that in your list. You should do a permissions repair using the Disk Utility app on your Mac.
    Have you added any 3rd party or Quicktime plug-ins lately? These sometimes can cause conflicts. If you have any, you could try moving them to a different folder to temporarily disable them, and see if that solves it.
    Make sure that you have sufficient free disk space for iMovie to operate efficiently. 20GB to 25GB is oft recommended on this forum.
    Make sure that your Quicktime is updated to current version.
    Any new software installed lately that could be causing a conflict?
    If the problems are occurring solely in the currrent project, and the diagnostic efforts that you have made don't solve it, then you probably should start over. This is a relatively short movie, so the effort is fairly minimal. Can save a lot of time in the long run. You might be able to clear out all of your titles and transitions and transfer your clips into a new iMovie project with all of the editing still intact. Always make a backup copy of your movie, first.

  • I have OSX 5.8 and I used imovie to create a DVD. Can I import the DVD back into imovie?

    I have OSX 5.8 and I used imovie 09 to create a DVD. I have deleted the project. Can I import the DVD back into imovie in order to edit it?

    How to Import DVD to iMovie Free to Create Your Own Videos
    http://www.macxdvd.com/mac-dvd-video-converter-how-to/import-dvd-to-imovie-free. htm

  • Transitions and Titles

    Everytime I add a transition or title to a clip, it messes up the sound for the amount of time the title or transition plays. I don't know what to do. Anybody know how to fix this? Thanks.

    Hi F
    Sound:
    Before inserting the transition. Select both clips involved. Extract sound.
    Now do the transition without messing up the sound.
    Yours Bengt W

  • Error when trying to add transitions and titles

    I'm getting an error message on iMovie HD 5 when trying to add a title or transition that says, "error in system operation (-4960)" can anyone help me out here?
    thanks!

    Hi minD:
    This error usually indicates an OS problem, rather than iMovie problem.
    Prevent Mac Disasters
    Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
    http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
    (Article is in 3 parts, don't miss parts 2 and 3)
    Sue
    (Thanks to Lennart Thelander for the copy & paste)

  • More Titles for imovie 09

    I was wondering if i could download even more imovie titles for imovie 09. I didn't know if there are plug ins I can download or something. Any information would help

    artistjoh wrote:
    .. iMovie 06 was more sophisticated than iMovie 09. Is this the case and could it do things like add animated images?
    Yes.
    iMHD6 was a 'real', timeline based NLE. it lacked a few of iM09's features as greenboxing and pic-in-pic, but due to an API, you were allowed to teach iM new tricks by plug-ins.
    have a look on this website: www.geethree.com
    they still offer an awesome bunch of plugins for incredible effects, transitions and titles..
    for stop-motion..
    yepp, iMHD6 allowed a 'length' of clips down to 1 frame (iM09 is limited to 3frames), allthough I recommend designated tools as FrameByFrame or - bestofshow - iStopmotion (onion-skinning, stuff...).
    if you like to make a bunch of drawings into a 'video', QuicktimePro offers a simple conversion of an Image Sequence to .mov..
    have a look here, my 'Say Cheese Productions'-intro.. that is done with QTpro..:
    http://www.youtube.com/watch?v=V7-BHrrF-EE&hd=1
    iMHD6 was the little brother of FCE, which is the little sister of FCP..
    iM09 is a from scratch new app.. just sharing the name, but totally diff. app and usage (a 'clean'n upload-tool, I like to say)
    Message was edited by: Karsten Schlüter

  • Titles from iMovie 08 NOT showing up in iDVD?

    I know the product is just out, and many are still playing\learning, but this is driving me crazy! Playing around last night in iMovie 08. Made a short movie, testing a new cam, and added a title, credit and some fades. They appear, play, look great etc. in iMovie, HOWEVER, when I "share" it and import to iDVD, none of the titles, transitions etc. appear.
    Anyone know what I might be doing wrong, and is this the right place to post? (Wasn't sure if I should post in the iMovie forum, as that parts working fine)!
    Thanks!

    Ok, not sure why this happened, but now it's working. I "republished" the project again, I know I did it the first time as well, and suddenly all transitions and titles are available in the exported version.
    Strange....a bug maybe?

  • After Mavericks upgrade I lost  the current I Movie project I was working on.  All that is left is the video clips, no photographs, music, transitions or titles. Three weeks work gone!

    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.

    rob2433 wrote:
    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.
    It should still be on your backup drive. Try reimporting it.
    Pete

  • Not showing Menubar item and Title text in Menu painter screen

    I have prepare the Menubar items & Text title in Menu painter, but at final when i execute the program, it shows the fields & buttons but not the menu bar item and title that i have created. I am missing some step or what. Please help me. Thanks in advance.
    Pradipkumar

    Hi,
    perhaps you didn´t activate the GUI status. Go to transaction SE38, enter your programme´s name, press ctrl + shift + F5. System displays all components in your programme. Open the nodes for GUI status and GUI title .... and those might be inactive.
    Otherwise, you didn´t assign the menubar and title to your programme.

  • TRANSITIONS AND EFFECTS???

    Hey guys i am so new to imovie. I got a mac 3 yrs ago but just now using imovie. anyway i have both imovies 6 and 8 and i see that imovie 6 has more transitions and effects. Imovie 8 doesn't. So either i am looking at the wrong place or they don't have the same things. Imovie 6 has more to offer. Anyway i can import those to imovie 8 or somehow where to get some??? Thax for any help!!

    Hi
    The everlasting question and the eternal answer.
    iMovie'08 is sometrhing compleatly different to iMovie 1 to 6.
    It's not an upgrade, just a totally different application.
    Yes iMovie'08 has some nice features, color correcting etc. BUT lacks the base
    of video editing.
    iMovie HD 6 has this and much more. That's why Apple are giving it away to iLife08
    owners and don't delete it (as with other upgrades) when installing iLife08.
    If You find iMovie HD 6 to limited eg color correction , picture rotation,
    picture in picture etc. there are two ways to go:
    • Plug-ins from third part deliverer
    • FinalCut Express
    iMovie'08 isn't an upgrade - BUT if You aim for YouTube etc. then this can be of help.
    Count the cost and choose vicely.
    Plug-ins:
    Stupendous software http://www.stupendous-software.com
    GeeThree http://www.geethree.com
    cf/x. http://www.imovieplugins.com
    Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
    http://www.imovieplugins.com/fxhome.html
    I go for FCE.
    Yours Bengt W

Maybe you are looking for