Transitions Are Not Attaching In FC7

I have more than sufficient handles on the DVCProHD 720/24p clips.
Using FCP 7 in 10.5.8.
Dissolves do not take. In the past I would add a cross dissolve or Fade In Fade Out Dissolve to the head or tail of incoming or outgoing clips and the transition would take.
Now this just doesn't work.
Anyone else experiencing this?

I did key frame opacity to get around it
But I do recall a similar post recently that I couldn't locate.
This was never an issue with 6.0.x and yes I am running 7.0.1.
Clean install on everything.
Didn't trash my preferences, because I'm nearly done with the edit, nor changed the codec for the same reason
thanks Michael and Shane

Similar Messages

  • Transitions are not rendering.  Help?

    I have used iMovie many times, but for some reason my transitions are not rendering now. I place them in and they do not render. I am also having a hard time gettin transition in because after I do one then it shows up as an error and asks me to close the program.
    Any ideas?

    I had a similar thing recently.
    For me the issue was that I'd put text on the clip it was transitioning too - as it can't render both the transition and the text it ignores the transition (it shows it's doing this by greying it out in the project browser).
    To get round it just drag the text a couple of seconds into the clip - essentially remove the overlap.

  • Alpha transitions are not in bold

    i just downloaded Final Cut Studio 7 and my alpha transitions are not in bold [so they are unusable]  Also, I can't import the color looks folder...any ideas?

    Because they are not bold does not mean they are not useable. Bold transitions simply mean the transitions will playback in realtime.
    You don't download alpha transitions from Apple. The alpha transition is part of Effects in FCP. The componenst you download are just video files used in the alpha transition.

  • My phone is stuck in headphone mode even though the headphones are not attached to the phone.  How do I fix this?

    I am trying to raise the volume on my phone, but it is saying that the headphones are attached when they are not attached.  How do I fix this?

    I tried everything there was. I tried to plug and unplug, I tried to clean it and dry it, and I really didn't want to put my phone in a bag of rice for 12 or 24 hours because I wasn't very patient. So what I did was; I put my phone on headphone mode and put it on airplane mode, then I left it there for 5 minutes and turned airplane mode off and it was working!!!! Hope this helped.

  • Transitions are not inserting properly in Final Cut Express 3.5

    I am having problems adding transitions between certain clips. I have searched these forums, but have not found any solutions to my problem. I will try and add transitions between two clips and it looks like it is only partially there. It won't let me adjust it in any way, either. Furthermore, it is only 7 - 12 frames when it should be 1 second long.
    P.S. There is over five seconds of video on each side of the transition.

    Its not the length of the clips, its the handles. Handles are frames beyond the length of the clips that FCE needs to create the transitions. Basically you need 15 extra frames or so for your transition; if one of the two clips is the very end of a camera shot, for instance, you won't have that
    Try trimming the clips. Or double clip the transition to bring it into the Viewer. At the top of the Viewer window you will see three orientation buttons for the trans; middle, left and right. Try changing that to see if it helps

  • Transitions are not working

    When I add transitions between clips (even if I select both clips and add), there is nearly no affect. In some cases, just to test, I have set the transition length to be one minute and the resulting clips when I play it don't transition. Rather they cut from one to the next. The transition are in the timeline.
    Btw, I'm using v5.

    Okay... so I tried that and I did notice iM start to do something in the background. I saw the transition in the timeline (I had seen the before). I tried a 20 second transition (admittedly too long - but anything less -- event 10 seconds -- is not noticeable). I then ran the two clips with the transition in between. The transition, which was set for 20 seconds, was noticeable for about 1-2 seconds.
    Now what's strange is, when I look below the video to see the timeline running, I can see the the transition icon running. However, in the video, there is nothing other than the 1-2 second transition.
    So I could change this to a 5 minute transition, and there would be no difference.

  • Web Page transitions are not smooth

    I just published my new website on web.mac.com/cherisykes and notice that the changes from page to page are not very smooth or prompt. Is there anything that can be done?

    The main reason is your choice of the "Darkroom" theme. It uses an image to create the textured background and this increases the download time and is responsible for the "venetian blind" effect as the page loads in the browser.

  • Using a mac, my transitions are not appearing.

    I updated, activated, deactivated, reinstalled.....nothing.  what to do?!!

    Thanks for responding, however the problem is they are not on my computer.  I bought them using my itunes account on my phone and I want them on my computer.  When I purchase music like this, the computer checks for downloads and then voila, they are added to my library.  I want to do the same thing with my audiobooks, since my Imac has bigger speakers

  • Pdf files are not attaching correctly to emails. I have tried the reset firefox option but this has not worked.

    I use comcast for my email. I have attached scanned doc in pdf many times successfully. Now attachments will not display, when I check the attachment all I get is a blank page with the note the pdf docs may not display correctly

    Firefox 19 changed your default viewer for PDFs to the built-in viewer. Maybe it can't handle the scan due to size or other reasons?
    To change your PDF handler to the Adobe Acrobat plugin or an external application, you can update one of your application preferences. There is now a support article on this: [[How to disable the built-in PDF viewer and use another viewer]].
    Any luck?

  • Transitions are not rendering

    I'm using iMovie HD to try and edit a movie recorded with my MacBook. Whenever I try to put a transition between clips, it puts in the transition, but does not render it. Between two particular clips it won't put the transition at all, but gives me an error message (saying that and unknown error has occurred and I should relaunch or continue working) I have restarted the program, restarted the macbook, repaired the permissions and restarted and it still won't insert a transition. I've made tons of movies with this macbook and software and never had a problem like this. I even opened an older movie and tried to put a transition in and it wouldn't work! Any help out there? I think I'm going to try my G5 and see if it still works.

    Hi
    iMovie versions prior to 08:
    • Here You can add third party plug-ins. Rather often one or more starts to ill behave
    • Bring them out to the desk-top then re-introduce one at a time to figure out which one
    that's harmful
    Not knowing the origin to Your problem - General approach when in trouble is as follows:
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Delete iMovie pref file - or rather start a new user/account - log into this and re-try
    • Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
    • Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
    • Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    iMovie pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    and is named: com.apple.iMovie.plist
    While iMovie is NOT RUNNING - move this file out to desk-top.
    Now restart iMovie.
    Yours Bengt W

  • Transitions are not Cooperating

    Hi there guys,
    Been having trouble getting transitions to cooperate since I moved from CS5.5 to CS6.
    When I used CS5.5, If I wished to have a transition reveal a new clip at a faster speed than the default setting, I would simply select the transition and drag the "Start" slider a number above 0.
    However, ever since I moved to using CS6, the "Start" slider appears to have no effect on the transition speed whatsoever. No matter what number I have dragged it to, the transition still runs for the same time as the default setting and the new clip will only begin to appear when the transition gets about halfway through (as if it were starting at 0 on the slider).
    Has anybody run into this problem as well and have a suggestion that might help solve it?
    Would be massively appreciated if somebody could point me in the right direction,
    Cheers!

    If you want to change the speed of the transition, you need to be adjusting the DURATION parameter, not the start.
    Jeff

  • I have FF 7.0 on a PC. Word docs I try attaching to my mobileme emails are not attaching. I can attach using IE. Did something happen to cause this after I upgraded to 7.0?

    Just the last few days, I've been unable to attach docs to outgoing emails on my mobileme account. Also, have not been receiving some daily alerts in my inbox, which I count on getting. Other mail seems to be coming through.
    I am able to make attachments using the IE browser. Chatted with mobileme folks and they can't seen any problems on their end. Did my upgrading to FF 7.0 cause this problem? Thanks for your help.

    Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

  • Almost all of my effects and transitions are not working on my fcpx trial

    i don't know what happened or how to fix it, its getting extremely annoying now. it has happened before then i fixed it and i down really know how i just turned off my computer and it worked then a few days later i turned it off and turned it on it wasn't working and i tried that a few times to see if i could get it working its not doing the trick! it would be GREATLY appreciated if someone would help me!

    I have a full version with several 3rd party plugins (like FxFactory) installed. None of the 3rd party plug-ins are affected and not all of the standard effects are affected. A search of the problem has revealed others have had this same issue in the past but no remedies other than a full drive wipe and reinstall have come back as effective. I am preparing to do this but I'd rather not as I'm in the middle of 2 large projects.

  • Since upgrading to Lion, my PC recipients are not receiving photos I attach to the email sent from iphoto. Why?

    Since I upgraded to Lion, my photos are not attached to emails. Example: I select photos in iphoto, click Share and send the email.
    Recipients tell me that there is 'nothing attached, no photo attached."  Can you help?

    This doesn't work for me at all. I tried entering exactly the same information that I used to set up my regular email account and I'm still getting an error message. I even tried switching to using my gmail account and neither one worked. Then it got hung up and had to repair my database! I have a lot of photos on my Mac (thank goodness they're backed up) and I was really sweating it for a moment.
    Apple is so easy until it's not. I find this to be really aggrevating and I'm irritated that it hasn't been fixed. In fact I did an online search and someone described this same problem in detail and it was exactly what was happening to me. Same error messages.
    I'm frustrated that Apple keeps updating it's operating system and then we go through these glitches.
    And while I'm at it, I have never had such a frustrating time using my login information as I have to get into this forum! Why do they make it so difficult? There's just something about the way it's worded that get's me messed up every time. Meanwhile, at least get iPhoto fixed!

  • Segregate the values which are not in Hierarchy ............

    Hi All,
    Please help me in building the following query:
    Parent Child
    ==== ===
    10 20
    20 30
    30 40
    50 60
    70 80
    etc..... In the above data let us assue there is only one grand parent say 10 and the values 50,60,70,80 etc are not attached to grand parent 10.So i need to display the values which are forgotten to attach to the Top Node 10 i.e, here 50,60,70,80 etc. If my query helps in retreving these values then i can attach them back to the hierarchy.
    Thanks in advance.
    regards,
    kalyan

    SQL>WITH t AS
      2       (SELECT 10 AS par, 20 AS chi FROM DUAL UNION ALL
      3        SELECT 20, 30 FROM DUAL UNION ALL
      4        SELECT 30, 40 FROM DUAL UNION ALL
      5        SELECT 50, 60 FROM DUAL UNION ALL
      6        SELECT 70, 80 FROM DUAL)
      7  SELECT *
      8    FROM t
      9   WHERE chi NOT IN(SELECT     chi
    10                          FROM t
    11                    CONNECT BY PRIOR chi = par
    12                    START WITH par = 10);
           PAR        CHI
            50         60
            70         80hth, Urs

Maybe you are looking for