Transitions are not Cooperating

Hi there guys,
Been having trouble getting transitions to cooperate since I moved from CS5.5 to CS6.
When I used CS5.5, If I wished to have a transition reveal a new clip at a faster speed than the default setting, I would simply select the transition and drag the "Start" slider a number above 0.
However, ever since I moved to using CS6, the "Start" slider appears to have no effect on the transition speed whatsoever. No matter what number I have dragged it to, the transition still runs for the same time as the default setting and the new clip will only begin to appear when the transition gets about halfway through (as if it were starting at 0 on the slider).
Has anybody run into this problem as well and have a suggestion that might help solve it?
Would be massively appreciated if somebody could point me in the right direction,
Cheers!

If you want to change the speed of the transition, you need to be adjusting the DURATION parameter, not the start.
Jeff

Similar Messages

Transitions are not rendering. Help?

I have used iMovie many times, but for some reason my transitions are not rendering now. I place them in and they do not render. I am also having a hard time gettin transition in because after I do one then it shows up as an error and asks me to close the program.
Any ideas?

I had a similar thing recently.
For me the issue was that I'd put text on the clip it was transitioning too - as it can't render both the transition and the text it ignores the transition (it shows it's doing this by greying it out in the project browser).
To get round it just drag the text a couple of seconds into the clip - essentially remove the overlap.

Alpha transitions are not in bold

i just downloaded Final Cut Studio 7 and my alpha transitions are not in bold [so they are unusable] Also, I can't import the color looks folder...any ideas?

Because they are not bold does not mean they are not useable. Bold transitions simply mean the transitions will playback in realtime.
You don't download alpha transitions from Apple. The alpha transition is part of Effects in FCP. The componenst you download are just video files used in the alpha transition.

Transitions are not inserting properly in Final Cut Express 3.5

I am having problems adding transitions between certain clips. I have searched these forums, but have not found any solutions to my problem. I will try and add transitions between two clips and it looks like it is only partially there. It won't let me adjust it in any way, either. Furthermore, it is only 7 - 12 frames when it should be 1 second long.
P.S. There is over five seconds of video on each side of the transition.

Its not the length of the clips, its the handles. Handles are frames beyond the length of the clips that FCE needs to create the transitions. Basically you need 15 extra frames or so for your transition; if one of the two clips is the very end of a camera shot, for instance, you won't have that
Try trimming the clips. Or double clip the transition to bring it into the Viewer. At the top of the Viewer window you will see three orientation buttons for the trans; middle, left and right. Try changing that to see if it helps

Transitions are not working

When I add transitions between clips (even if I select both clips and add), there is nearly no affect. In some cases, just to test, I have set the transition length to be one minute and the resulting clips when I play it don't transition. Rather they cut from one to the next. The transition are in the timeline.
Btw, I'm using v5.

Okay... so I tried that and I did notice iM start to do something in the background. I saw the transition in the timeline (I had seen the before). I tried a 20 second transition (admittedly too long - but anything less -- event 10 seconds -- is not noticeable). I then ran the two clips with the transition in between. The transition, which was set for 20 seconds, was noticeable for about 1-2 seconds.
Now what's strange is, when I look below the video to see the timeline running, I can see the the transition icon running. However, in the video, there is nothing other than the 1-2 second transition.
So I could change this to a 5 minute transition, and there would be no difference.

Web Page transitions are not smooth

I just published my new website on web.mac.com/cherisykes and notice that the changes from page to page are not very smooth or prompt. Is there anything that can be done?

The main reason is your choice of the "Darkroom" theme. It uses an image to create the textured background and this increases the download time and is responsible for the "venetian blind" effect as the page loads in the browser.

Using a mac, my transitions are not appearing.

I updated, activated, deactivated, reinstalled.....nothing. what to do?!!

Thanks for responding, however the problem is they are not on my computer. I bought them using my itunes account on my phone and I want them on my computer. When I purchase music like this, the computer checks for downloads and then voila, they are added to my library. I want to do the same thing with my audiobooks, since my Imac has bigger speakers

Transitions are not rendering

I'm using iMovie HD to try and edit a movie recorded with my MacBook. Whenever I try to put a transition between clips, it puts in the transition, but does not render it. Between two particular clips it won't put the transition at all, but gives me an error message (saying that and unknown error has occurred and I should relaunch or continue working) I have restarted the program, restarted the macbook, repaired the permissions and restarted and it still won't insert a transition. I've made tons of movies with this macbook and software and never had a problem like this. I even opened an older movie and tried to put a transition in and it wouldn't work! Any help out there? I think I'm going to try my G5 and see if it still works.

Hi
iMovie versions prior to 08:
• Here You can add third party plug-ins. Rather often one or more starts to ill behave
• Bring them out to the desk-top then re-introduce one at a time to figure out which one
that's harmful
Not knowing the origin to Your problem - General approach when in trouble is as follows:
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
• Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
iMovie pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
Yours Bengt W

Transitions Are Not Attaching In FC7

I have more than sufficient handles on the DVCProHD 720/24p clips.
Using FCP 7 in 10.5.8.
Dissolves do not take. In the past I would add a cross dissolve or Fade In Fade Out Dissolve to the head or tail of incoming or outgoing clips and the transition would take.
Now this just doesn't work.
Anyone else experiencing this?

I did key frame opacity to get around it
But I do recall a similar post recently that I couldn't locate.
This was never an issue with 6.0.x and yes I am running 7.0.1.
Clean install on everything.
Didn't trash my preferences, because I'm nearly done with the edit, nor changed the codec for the same reason
thanks Michael and Shane

Almost all of my effects and transitions are not working on my fcpx trial

i don't know what happened or how to fix it, its getting extremely annoying now. it has happened before then i fixed it and i down really know how i just turned off my computer and it worked then a few days later i turned it off and turned it on it wasn't working and i tried that a few times to see if i could get it working its not doing the trick! it would be GREATLY appreciated if someone would help me!

I have a full version with several 3rd party plugins (like FxFactory) installed. None of the 3rd party plug-ins are affected and not all of the standard effects are affected. A search of the problem has revealed others have had this same issue in the past but no remedies other than a full drive wipe and reinstall have come back as effective. I am preparing to do this but I'd rather not as I'm in the middle of 2 large projects.

Export problem - transitions and motion are not clear, lines

I am using FCP with a blend of pictures and video clips. When I do the export, the pictures are showing up pretty clear but the transitions are coming out unclear, like with lines through it. A sample is here:
http://www.metrosportsimages.com/Reunion/testexport3.mov
I'm guessing this has to do with my export settings. I've tried exporting with numerous different settings and still no success. Once I changed the settings and it makes the pictures unclear so the transitions look "not so liney" looking, but that's just because the quality is lower and the blur is preventing the lines from showing as much.
I'm hoping someone can help. I am supposed to be burning this movie to DVD and producing 100 copies by Friday!
Jennifer

This happened to me once, using stills in fcp, due to a problem with my hard drive: so I'd be interested to hear a resolution,particularly as I can't get back the project file due to said problem
John Lawrence

Spin transitions and ripple dissolve are not rendering?

Hi,
Most of my transitions are rendering normally in final cut pro 7, the strange thing is there are a few that don't work!!!!
If I add a spin transition or ripple dissolve I can see them working fine when I scrub across the timeline, when I do a render they just don't render properly and when you play back the rendered file you just get straight video switching to the next?
Can anybody help?

I had a similar thing recently.
For me the issue was that I'd put text on the clip it was transitioning too - as it can't render both the transition and the text it ignores the transition (it shows it's doing this by greying it out in the project browser).
To get round it just drag the text a couple of seconds into the clip - essentially remove the overlap.

LInks in Flash CC after automatic transition to new scene are not working

I have a flash file containing three scenes- Scene1, Scene2 and Scene3. In Frame1 I have a loading screen animated with motion tween. I also include a function, which automatically transfer me to Scene2 after 10 sec. However after I go to Scene2 the buttons to go to Scene3 are not working. I've tried to remove Frame1 and then the buttons that are linking Scene2 and Scene3 are working, Do you have an idea where the problem might come from? Here is my code:
var loadNumber = 0; stop(); loadingPercents.text = loadNumber.toString() + "%"; /* Countdown Timer Counts down from a specified number of seconds. Instructions: 1. To change the length of the countdown, change the value 10 in the first line below to the number of seconds you want. */ var fl_SecondsToCountDown:Number = 10; var fl_CountDownTimerInstance:Timer = new Timer(1000, fl_SecondsToCountDown); fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler); fl_CountDownTimerInstance.start(); function fl_CountDownTimerHandler(event:TimerEvent):void { trace(fl_SecondsToCountDown + " seconds"); fl_SecondsToCountDown--; loadNumber +=10; loadingPercents.text = loadNumber.toString() + "%"; } stage.addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler); function fl_EnterFrameHandler(event:Event):void { if (loadNumber > 99) { gotoAndPlay(1,"Frame2"); } }
and for scene3:
import fl.motion.MotionEvent; stop(); BackFromPrizes.addEventListener(MouseEvent.MOUSE_UP, goBackFromScene3); function goBackFromScene3(event: MouseEvent): void { gotoAndStop(1, "Scene2"); }
Thanks

if the code you showed fails (and it's executing), you have no scene named "Scene2".
btw, "Scene2" is not the same as "Scene 2" or "scene2 or "scene 2", which would all be common typos.

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

SahrePoint 2013 Server & Project Server 2013 - Notifications and reminders are not received by certain users

Dears,
We have recently implemented MS EPM 2013 where we started to face some strange behavior with the standard alerts and reminders sent from the system.
Minor number of the users (with different levels of privileges from administrators to team members) are receiving emails and alerts normally (either when they are assigned on project schedule tasks or SharePoint list items alerts) without any issues however
the. on the other hand the other majority number of resources are not receiving any kind of alerts from the system (neither from Project Server Nor from SharePoint).
knowing that, all the resources/users have their emails configured properly, and their other attributes are almost the same for all users. all the emails are stored on the same exchange server.
Anyone can help on this please.
Appreciate your cooperation.
Ibrahim Al-Masri Technology Manager at MethodCorp

Thanks Dinesh,
Actually the users have this global permissions configured for them and yet they weren't receiving emails.
We Just could solve this puzzle, all what we needed to do is to configure the
RBS for the majority for the users who weren't receiving emails.
Welcome to EPM 2013 UN-unannounced changes.
Ibrahim Al-Masri Technology Manager at MethodCorp

Transitions are not Cooperating

Similar Messages

Maybe you are looking for