Transitions do not render Audio / no audio while importing from cam / etc.

hi - i still have problems with the latest iMovie HD 6.0.2. (267) on my brandnew 17" iMac (Intel) 1-GB-RAM, (QT WITHOUT any 3rd-party-SW)
1. the build-in transitions (soft/smooth, overlay) dont render the AUDIO-file.
it takes NO effect (only the images do)
2. by importing clips from the camera i cannot hear AUDIO the same time
(by replaying the importet clip audio is available/imported)
3. the sharpening filter can't show a preview - the effect/s will only appear AFTER rendering.
any idea?
Mike

As others have noted, the audiolevels are as they are when you record. If you need good audio on your video, you need to make sure the levels are ok while you record!
That is, not to low, and not clipping.
On most pro setups, the audio is controlled by a seperate person, or you have mics with microports on the speaking person(s) that are adjusted before the actual recording starts.
Too low audio tend to give a lot of noise, and to high audio make clippings when digitized, making distortions.

Similar Messages

IDoc not found in Objects list while Import from SAP

Hi All,
We could not find the custom IDoc in the Objects list, to import to Integration Repository.
Please let me know is there any setup required on R/3 side.
Thank you very much in advance.
Rama

Hi,
Are you able to see, standard/any idocs while importing ? If not-
In your SWCV, did you give SAP Logon credentials before importing the idocs.
Open SWCV in the repository, and choose option box "Import of RFC and idoc ....permitted" .
Then it will ask you to provide SAP system Id, Client , user id /password etc.. Then save and activate it. then try to import the idoc by going to Imported Objects section under SWCV and then Idoc and then import it.
If you are able to see standard one, then I thing you did not activate the custom Idoc types/message types and segment in R/3 system.. do this and check
Regards,
Moorthy

File size limitation while importing from camera?

I just installed QuickTime 7 Pro and tried to import a movie from my video camera (mini DV).
It worked ok until it stopped with the pop up message like "file too large". That happened after 35 min of recording and 7.8 GB file size.
Is there really a limitation in file size?
thanks for feedback

Th DV quality is not as good as mp4 would be but it is a nice alternative.
If miniDV camcorder is recording in standard DV, then the Vidi captured quality should be the same as your source file on the camcorder. If camcorder is recoding in HDV and down-converting to DV for Vidi capture, then display dimensions would be reduce drastically. (In this case, you should capture the content using iMovie which will convert the HDV content to AIC while retaining the original dimensions and converting the audio to QT compatible audio.) The main difference between MPEG-4 and Device Native capture by QT 7 Pro is that the camcorder's DV content is transcoded to the MPEG-4 OR MPEG-4/AVC (H.264) compression format making the file much smaller. DV is an "editing" compression format while MPEG-4 is a "delivery" compression format. You can edit the DV files in QT 7 Pro or any other Apple or third-party video editor and then convert them to any QT compatible compression format for which your system is configured.

Imovie slows down then freezes while importing from camera

I am trying to import a movie from my canon hv10. I've never had problem the last 2 movies I did. but this time around it starts importing, and a few clips later, slows down to 1/8th time. then freezes. The camera is still playing but it has stopped importing. I have tried to pause it to let it catch up. Restarting it numerous times. It is being imported into my 500 GB hard drive. I have 400 GB available. It's worked before in HD. Any ideas? anything would be helpful, I've searched every single message board so far. thanks.

I had a smilar problem. it came up when I changed OS to Leopard OS X 10.5.
My Imovie HD 5 had been working fine until then under earlier OS versions, both in LP as well as in normal mode. Then all of a sudden importing stopped eery few seconds.
I checked many discussions in this forum and tried a lot of suggested solutions, to no avail. I have now come to realise that Leopard is the problem, not the camera, the cable, or preferences or good old iMovie HD.
I simply went back to an older laptop (iBook) running OS 10.3.9 and iMovie 3 . No problem whatsoever importing clips (just had to start a new project about every 20 minutes of clip import). Then attached my external harddrive via firewire, copied the projects to the Hard Disk and then opened them with iMovie HD 5 and bingo: the project was OK and could be further worked on.
So that does not solve the basic problem, but is not too complicated as workaround.

IDVD 08 freezes while importing from camera for OneStep DVD

I am importing video from a Sony camcorder (dv) as the first step in a onestep DVD process. I have tried two different tapes and it has frozen both times - once at 14 min. and the second at 19 min. It seems to be in the middle of a scene in both cases. The camera is still running, but iDVD is no longer importing and is reported as "No Response". Have to Force Quit.
Any ideas?

I appreciate the disk space problem, as the first time I tried to capture, it ran out of space on my internal drive. That's when I moved the capture to the firewire drive.
So I checked the internal drive - 13.6GB available before capture. In addition, I monitored it throughout the capture process (using the application "What Size", which tells you how big all your files are) and found it stayed stable throughout the capture sequence.
Meanwhile, the firewire drive showed the captured file to be growing as it captured more video. I've tried to capture this particular tape twice, and I see that it froze with the captured file size at EXACTLY the same size: 4,294,934,528 bytes. This is about 19 min, 53 sec. of video.
I wonder if a) it only really works capturing to the internal drive, or b) if something got messed up when I ran out of space the first time. I think it did capture all or most of the tape when I ran it the first time on the internal drive.
I guess I could clear more space on the internal drive and give that a go again. Ideas?
Doug

Audio wont play after importing from camcorder

I import video fine via the camcorder, the audio plays fine while importing but when I went to edit it, the audio track stops playing after about a mintue or two.
It shows up in the timeline, I have it checked to play, but for some reason it does not play, any ideas why this happens? I extracted a small clip of audio, and it still wont play. Any help is appreciated!

I'll double check at home the cam is there, I was messing with the settings at one point, new cam but don't think I changed any audio settings, just put it to stereo....

Is there any way to Import From Camera (dv) in a way that Final Cut Pro can later import everything, including the audio

I know iMovie dv to Final Cut Pro has no audio. At least with my old events. But is there any way I can make it so future dv files Imported From Camera in iMove 2011 will later work in FCP?

Hi
Yes and No
And it depend's on what quality You want and how much problem You stand in FC - and what version of FinalCut You mean.
• FinalCut Pro-X - I have no clue at all
• FinalCut Express and Pro (till 6.0.6) - I'm very familiar to.
• If You take out the Imported/Captured material from Event's - it seems to be 100% OK - but in wrong codec so it will work in FinalCut BUT with a lot of RENDERINGS - every slight change = Need of RENDERING. To much for me.
• If You aim to do some Editing in iMovie them move over to FinalCut = Moving from Event's to Project's result in that every second line in the picture is discarded ( and can not be repaired ) so the project will lose a lot of quality - whatever way You use to Export/Move it over to FinalCut.
So at least I'm better of by Capture in FinalCut from Start as I can keep 100% quality till Movie is done.
Yours Bengt W

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

Error While Importing from EIF file into AW

Hi All,
I am facing the following error while importing from EIF file into AW using AWM as well as from sql prompt.
java.sql.SQLException: ORA-36786: (IOSEC04) File POCAW/abc.eif does not exist or cannot be accessed.
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at line 1
at oracle.olap.awm.eif.eifimport.ImportDialogActionThread.doExportOrImport(ImportDialogActionThread.java:172)
at oracle.olap.awm.eif.EifDialogActionThread.doAction(EifDialogActionThread.java:58)
at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
i have already created the directory pocaw.
i have done the following steps :
CREATE OR REPLACE DIRECTORY POCAW as 'D:\Olap_POC\export';
GRANT all ON DIRECTORY POCAW to PUBLIC;
execute dbms_aw.execute ('aw create ''POC_AW''');
execute dbms_aw.execute('cda pocaw');
execute dbms_aw.execute('dtb attach POC_AW rw');
execute dbms_aw.execute('import all from eif file ''/abc.eif'' dfns update ');
any idea or thought would be appreciable.
thanks n advance
anwar

execute dbms_aw.execute('import all from eif file''/abc.eif'' dfns update ');
Maybe one of the following file names could help
(have never tried it):
''abc.eif''
''POC_AW\abc.eif''Yes,
you don't need the slash. CDA is like setting a default directory.

While importing from my digital camera (Olympus XZ-2), iMovies quits, WHile importgin from my digital camera (Olympus XZ-2), iMovies quits

While importing from my digital camera (Olympus XZ-2), it "unexpectedly quits" - seems to happen on slightly larger clips (over 90 seconds) - not sure if it is related to the model camera or iMovie 11'. Any advice?

Lion is 10.7, Snow Lepoard is 10.6, Leopard is 10.5.
I woul strongly recomend you update to 10.6.8 (the last snow lepoard update) for a number of reasons. First 10.6.8. is a solid OS at this point you won't have to many (or any) gotcha's. Second Leopard (10.5.x) is going away. Pretty sure there will be no more updates for it at this point. If not it won't be long before that happens. Also you will need to have 10.6.8 installed in the event you want to at some point upgrade to Lion.
But finally perhaps the most important point if you don't have 10.6.8 you can't acess the App Store and if you can;t acess the App Store you will need to get the boxed version of Aperture 3. The differerence in price between the boxed version and the App Store version will more then pay for the upgrade to Snow Leopard. In fact you should have a fair bit of change left over.
good luck

Is it Possible to Mark Chapter while capturing from camera?

While capturing from camera there are incidents (like obvious mis-speaks, etc.)that I would like to mark during the shoot when they happen to facilitate finding them while editing.
Is this possible to enter a chapter marker or something during live capture?
Open to any other suggestions.
Thank you.
I am using FCP 7.0.3.

After about a year of manually noting the time code and notes, I finally found a solution to the problem of marking chapters during a live shoot.
Final Cut Pro X will not allow you to mark a file while capturing it, probably because it does not actually change the raw file. However I just found a piece of software that will do the trick nicely. It is called Cut Notes. The only catch is that you must have an iPad to run it.
You can purchase it from digital rebellion for $9.99 at
http://www.digitalrebellion.com/cutnotes/
You start Cut Notes at the same time that you begin to capture, and it will start a timeline, identical to the one in FCP. Then for every edit point, you simply tap a key to insert the timecode along with either a pre-determined note or manually entered note as to the event. For example I have a note key that says MisSpeak, the opertator just taps it when I mis speak and it saves the time code and the MisSpeak title into a text file. I have another note key same for "walked off screen." You can Edit any number of note keys you may need. Then when finished, Cut Notes will email the file to your computer, simply import it to FCP as chapters using a free utility available at the same website. Awesome!!!
The only caveat is that you must import the file with markers before you do any editing to the project in FCP.
Hope this is helpful.
jac

Some JPG and AVI files imported from camera to iphoto, but not all

I just imported from camera to iPhoto using card reader and half the pics and a couple movies came over. The rest aren't recognized by my iMac, even though they say JPG and AVI and still run fine on camera. I installed Perian plugin a while back at the recommendation of one of you, which solved that problem and I just installed the recent update. I used time machine to restore old version, but that didn't work. I don't know if this is a Quicktime (v 7.4.1) issue or a problem with the flashcard. I tried opening via photoshop and iMovie. Photoshop CS3's message says "Could not complete your request because an unknown or invalid JPEG marker type is found." iMovie, when I try to drag movie into it says "The file could not be imported: ... Quicktime couldn't parse it: -2048". Hopefully one of you knows what is going on. Thanks!!!

Are you running a "referenced" or "managed" library?
Give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

I Movie message:No Storage Location set while importing from HD Handycam

While importing media from sony handycam (HD file based cam) the following message appears after the clips are ready to be imported:No Storage Location set. Cannot start ingestbecause there is no storage location set. Please set one under Storage in Preferences and try again.

I think these are the steps I took:
1 Shut down the computer completey and then startup again (Camcorder disconnected)
2 Connect camcorder and in iMovie follow the procedure to import from camera. This triggers the launching of iPhoto - but as iPhoto started to launch I had the mouse pointer on the iPhoto icon at the bottom of the screen and right clicked the mouse with the option button held and selected 'Force Quit'
It worked for me and I hope it works for you! Later when I went to import again, both iPhoto and iMovie behaved as expected.
The whole thing is a mystery to me and the original message is no help at all and gives no guidance as to how to solve this (common?) problem.
Hopefully this 'bug' can be fixed by Apple engineers -fingers crossed.

I am not able to change photo to video from Camera mode. The same problem is occurred now with iPhone. What is a problem?

I am not able to change photo to video from Camera mode. The same problem is occurred now with iPhone. What is a problem?

Ahhhh... didn't know this with iOS 7. Thank you so much.

ITunes crashing while importing from CD

I am a very new first-time iPod owner and am very frustrated by iTunes crashing with an access violation while importing from CD.
This has happened with a number of different and brand new CDs and it will import a number of tracks but then falls over. If I try to just import the particular track it will crash again but other tracks are imported OK. However if I drag and drop the same track from a windows explorer view into iTunes it will then import fine without crashing.
Any suggestions? OS is XP Pro. PC is Athlon 64 Dual Core with 1GB RAM. iTunes v 6.0.1.3
Peter

I seem to be having the same problem. I insert the cd and it reads it fine. I click to import and iTunes locks up. I use task manager to close iTunes and system is still bogged down. I have paid several people $$ and they don't seem to know the problem. There has to be a conflict somewhere but where?
Last person to help suggested that I use WinAmp to rip the cd and THEN import to iTunes.
Hubby has a Creative Labs MP3 and ripped 100+ cd's prior to iTunes installation with no problem.
Can anybody out there help?

Transitions do not render Audio / no audio while importing from cam / etc.

Similar Messages

Maybe you are looking for