Transitions fail to render

Hello-
I'm having the same problem Lori seemed to have here:
http://discussions.apple.com/thread.jspa?messageID=11395572&#11395572
Except that I am working with .dv files, along with some .gifs that I imported to the project via iPhoto and the "Media" browser within iMovie.
The project is about 2.5 minutes long, with about 42 clips/slides, and transitions between about half of them. Now I can't add any new transitions. Whichever transition I try with whichever clip (whether by clicking "Add", by clicking the check mark on the preview, or by dragging the transition into the desired location- the clips selected or not) the transition shows up in the right spot of the timeline with the dark red line indicating processing. The red line fails to fill, though, and if I try to save or do anything the "Rendering in Progress" warning shows up.
With one specific slide for which I'm using Ken Burns, the transition fails to appear at all in the timeline.
I've deleted and repaired permissions. I have 52 GB available.
Thank you!

Hard to tell what is going on there. Possibly you have some conflicting 3rd-party plug-ins. If so, you could try dragging them to another folder to temporarily disable them.
You also could try removing different elements of your movie until you get a combination that works. For example, substitute different music, or remove the .gifs.
However, before you spend more time on this it might be easier just to start over with a whole new
iMovie project. Your issues may be project related.

Similar Messages

After Effects CS6 fails to render and I dont know why?

I'm fairly new with After Effects and my problem is that when I am trying to render my movie, it fails to render at the exact same point every time. The point where it fails is when my 1st video is transitioning to my 2nd video in the movie. And when I try to RAM preview my movie, it wont render parts where one video transitions to another video. Earlier today there was an error coming up saying that frames could not render simultaneously and that I needed to fix my multiprocessing settings. I'm using both Quicktime Movie and MP4 files in this movie. Here are my Memory and Multiprocessing settings: http://gyazo.com/4974772d0a104f01c19257d75b790155

Nope, sorrry, those effects don't help diagnose anything.
If you answer these questions, we stand a fighting chance at diagnosis.

SOAP Sender Channel Failed to render XIMessage. Reason: java.io.IOException

I am attemping to set up a sender channel using the SOAP adatper to process HTTP(S) posts containg a file that is being uploaded.
The Sender channel is set up to use HTTPS With Client Authentication, and selected "Do Not Use SOAP Envelope" -- since the payload will not be SOAP. I am simply trying to generate a message in PI from the HTTP post.
I have posted the data but am getting the following error in the channel:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Failed to render XIMessage. Reason: java.io.IOException: Missing mandatory element <sap:Main>sap:Receiver/sap:Service
The trading partner I am workgin with only has the ability to use a generic POST (I believe he is usnig CURL or some some other tool the 'post' the data.

Thank you for your reply.
The solution I am seeking is not for XML payload. Its a flat-file that one of our trading partners is sending to us, both for flat files as well as EDI/X12 data. I have the checkbox selected to not use the SOAP Envelope and am using the "nosoap=true" in the URL.
This should be simple, as all we need to do is to pass the data as posted by the trading partner to a SFTP or FILE adapter on the receiver side. Nothing more than we've already done using an AS2 Sender channel for, the trouble with in case case our trading partner does not support any encrypted transports except for HTTPS.
-Gerry

IDVD failed to render movies...will not burn

I created a movie on iMovie and then brought it in to iDVD. When I hit burn it told me that it failed to render movies and will not burn what can I do?

hi Ed:
Why not try saving as a disk image and then burning that from the Disk Utility?
Sue

A frame failed to render while using Render Multiple Frames Simultaneously

Hello fellow AE users:
I've read other threads which deal with this issue, however they don't seem to be exactly what I'm experiencing so I'm starting a new thread. I did do several hours of due diligence by research others' handling of this issue, so I'm not just blindly reposting this question without having done some legwork.
I'm getting this message when rendering one of my compositions:
"After Effects warning: A frame failed to render while using Render Multiple Frames Simultaneously. Allocating more memory to the background processes in Memory & Multiprocessing Preferences may fix this problem. (26 :: 142)"
First, some background on what led up to this. I've built an entirely new system from scratch based on the new Intel 5960X 8-Core processor, with 64GB of RAM on an Asus X99-Deluxe Mobo.Brand new install of Windows 8.1, and brand new install of After Effects CC (latest versions as of this posting) and all of my plug-ins (mostly Red Giant, also all updated to current versions.) I have a new video card in this system (Gigabyte GTX 980 G1 Gaming) however this issue also happened with my old 4GB GTX 680 as well, which was in the original i7-950 system (see below.)
I've set up Multiprocessing preferences for 6GB reserved for system, 8 CPUs reserved for other applications which leaves "Actual CPUs that will be used: 8", with each CPU having a 6GB RAM allocation. That's 8x6=46G, leaving 18GB free for the operating system, which should be more than enough.
One could speculate that there is some plug-in that is using too much memory, or something weird with QuickTime or H.264 decoding (the source is one Canon 5D mk II H.264 .mov and one jpeg file). However, this issue did *NOT* happen on my old system, which was 4-core Intel i7-950, 24GB RAM, running the same version of After Effects CC and my plug-ins, and with only 3GB/Thread of ram allocated instead of the 6GB/Thread i'm using here.
I've simply loaded the old project on the new install and attempted to render. I have not changed any settings. I DID do the thing where you hold CTRL-SHIFT-ALT (or something like that) to reset all of the preferences when loading AE just in case that was the issue.
So, why would this be able to render using multiple processes on my old box with only 3GB/thread, while it will NOT render on this new system with double that, 6GB/thread allocated?
Please let me know if there is any other information I can provide that would be helpful to debug this.
Many thanks in advance for your help!

Thank you very much for the quick reply, Todd. I'll give that a shot. There also seems to be a problem with the Red Giant Cosmo plug-in. I get Cosmo engine initialization failures, but it's intermittent.

Error "Motion patch failed to render"

Hi all.
I am trying to approach the same topic I approached a while ago here but with no cuccess.
This problem has ground my productivity to a halt.
Every time I go to render a sequence that has any motion template files in it I get this error "Motion patch failed to render"
Therefor I have to export the whole sequence via compressor to view the clip. This takes hours and hours.
Can anyone help.
PLEASE !!!!!!!!!!

I kinda doubt they're compatible. Try exporting from Motion as a selfcontained qt with settings that match your fcp sequence and see if that will come in to fcp.

"Motion patch failed to render"

Hi guys.
I am hoping someone can help me with this very frustrating long term problem.
No one on the Ken Stone forum wants to touch it.
Basically it is this.
Whenever I import Motion template files into the timeline I lose all ability to render.
The error message gets thrown up straight away "Motion patch failed to render".
What is this Motion patch?
I thought maybe it is something to do with where my motion files are stored on the hard drive? Or maybe a Apple patch issue?
I really have no idea.
Can anyone help?

I kinda doubt they're compatible. Try exporting from Motion as a selfcontained qt with settings that match your fcp sequence and see if that will come in to fcp.

Effect failed to render

I am getting a red screen that says "The effect 'Soft Focus' failed to render: Your hardware cannot render at the requested size and depth." What kind of hardware do I need? We spent a lot of money on this machine. I tried rendering manually (instead of real-time), but it didn't help.

Hi! Not sure what you mean by the size of the "still" but the video size and the source footage is at DV resolution (720x540). I was trying to apply the effect to a video clip. I noticed on another thread that this error message can manifest itself when you have more than one video card (which I do). I turned off the Mac, moved my two editing monitors to one video card and put my projectors on another. After that, FCP applied the effect correctly without the error message. So everything works now! Just finished a video project for our banquet, and after this crash course in FCP I feel like I have a much better understanding of it. Thanks for answering all my newbie questions on the other posts too!

Safari fails to render Picasa page after downloading a photo

Not sure where and how to report this...
I download some photos from Picasa web interface to iPad local storage, using Safari as browser.
After downloading each photo, I go back to the album view, but it won't render, the page is almost blank.
Going up to album list and opening the album does not help.
But, if I go to iPad task list (or whatever you name it) and close Safari, then open it again, the album view reloads and renders ok.
So I'm inclined to think this is Safari bug rather than Google's.
Having to close and reopen Safari to download each picture is very annoying.
Thanks for reading.
dd.

Some new information (but still no resolution)...
I created a new dummy user account. Safari worked there. So it's obviously something in my user account. However...
I removed all plug-ins (~/Library/Internet Plug-Ins as well as /Library/Internet Plug-Ins). Didn't help, so I put them back. I again deleted caches and the com.apple.Safari.plist file. I deleted the entire ~/Library/Safari folder. Still consistenly won't render slashdot.org or hotmail.com and intermittently fails to render various apple.com pages.
I even deleted the Safari app (v2.0.2) and re-installed from the Tiger DVD (v2.0). Same problems still exist.
Are there any other preference files to try deleting? Any other suggestions?

Iphoto fails to render files for export to certain folders after upgrade

I just upgraded to Yosemite and the latest version of iPhoto but I now unfortunately get an error message when I try to export photos. It seems to work if I export to the main Documents folder but fails if I try to export to a sub folder of the main Documents folder (very odd) which is where I want the exports to be saved. The error message says "Unable to render file for export:/Volumes/NO NAME/DCIM/IMG-1058.jpg". I don't know why the path name shown here is a SD Card path which is not connected. Hope someone can help? It worked fine before the upgrade to iPhoto 9.6.1
Thanks
Craig

The iPhoto preference file might be wonky. Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Design View Fails To Render Some Pages Correctly.

Dreamweaver appears to have problems rendering some CSS in
Design View. Here
are links to an HTML page and a style sheet, both of which
appear to be
valid, but the page "breaks" in the Design View of both DW8
and DW CS3:
http://wspitt.com/csstest/index.html
http://wspitt.com/csstest/default.css

> Maybe not but its wrong to mislead them into believeing
if their page
> validates it will render correctly.
Who here has EVER said that? Nobody. This is your spin on our
comments.
If the page is not rendering correctly, it is a good practice
to start with
validation. If there are structural errors in the page, that
will find
them. You can then eliminate such considerations from your
troubleshooting
efforts.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Osgood" <[email protected]> wrote in
message
news:[email protected]...
> Murray *ACE* wrote:
>
>>>Murray thats nonsense.
>>
>>
>> You are distorting my statements to your purpose.
>
> Not really. I'm just providing a view from a different
perspective than
> yours.
>
>> A page that doesn't validate will likely not display
properly in DW. You
>> know that.
>
> Thats not my opinion. A badly coded page is more likely
not to display
> correctly. I don't consider one that fails validation on
a few minor
> points badly coded. One that does validate can display
the same issues as
> one that doesnt, if not worse.
>
> You know what validates and what doesn't.
>
> Sure and that to me is where it ends. If people feel the
need to validate
> then so be it but don't consider it the be-all and
end-all solution to
> possible display issues cross-browser.
>
> You do not make the
>> kind of structural errors that will cause a page not
to validate.
>
> To me thats whats its all about making sure the
structure is correct but I
> cant see the correlation with also wanting to make
anything valid.
>
>> Most of the people who post here with display
problems are not that
>> savvy.
>
> Maybe not but its wrong to mislead them into believeing
if their page
> validates it will render correctly.
>

Transitions won't render.

I've been having trouble on and off with the ken burns effect and now for some reason when I insert a transition it won't render. Is there some command I can put in that will make it render or something else I can do? Also, if I try to empty the trash I get an error message saying that something is rendering but nothing is.

HI Silas is Awesome - is your project stored on an external drive? If so it must be formatted for Macs - Mac OS Extended.

12c design view of JSF page fails to render with 'Loading failed Reason: Connection reset by server'

When in the design view of a JSF page, the page never renders in JDeveloper 12c. Instead I get an error message 'Loading failed Reason: Connection reset by server'. I traced this to a conflict with the port used by Cisco Anyconnect (5001) which seems to be something JDeveloper uses as well to render the page. Is there a way to change the port used to render the page in design mode? I could not find any settings in the preferences.

Hi Frank,
The proxy settings are set to use the system default proxy settings in JDev and I have not needed to change it when VPN'ed.
The product that is in conflict is the 'AnyConnect Web Security Agent' (acwebsecagent.exe) which runs whether I am on vpn or am in the office - it is listening on port 5001 and that is the same port jdev64w.exe is listening to when rendering the page in the design mode. I confirmed this using netstat -ab. After getting the conflicting program switched off temporarily, the design mode of the page was rendered within the IDE so that I could then drop components on the design surface.
Since I cannot get the Cisco product to listen on a different port, I am hopeful there is a way to modify the port used by JDev.
Thanks,
Sunil

General Error; failed to render the timeline and failed to export HD mpg2

I have searched for the posts if there is same issue I'm having on the forum, and it seems it's similar yet not really...
So I decided to post one.
I have 2100 sequential frames in jpgs. (each jpg size is 1280x720)
I open "image sequence" in QT 7.04 with 29.97 fps, then save it as MOV in external HD with firewire.
Then I import it into FCP 5.04 on Timeline.
Timeline setting is
Frame Size : 1280x720 HDTV 720P (16:9)
Pixel Aspect Ratio : Square uncheck Anamorphic 16:9
Filed Dominance : None
Editing Timebase : 29.97
Quick time Vieo Setting : Compressor -DVCPRO HD 720P60 Quality 100%
After I place the mov file on the timeline, the Red Bar shows up.
I tried to render the timeline, it will only try to render to 3% and stop, and "general error" pops up.
I tried to use Compressor 2.01 with HD mpg2 preset to export out as HD mpg2 format, and it will fail to export.
After I read several posts on here, I was wondering I might have corrupted mov...
I re-create MOV file from QT and import in FCP5 and do the same... but I still get the same error...
I tried to re-start computer and tried, no luck..
Then I was wondering maybe some of the jpgs is corrupted...
I'm not sure how to check which jpg file is corrputed since there is 2100 frames in directory.
It is able to show all jpgs as thumbnail images..
So my questions here.. are...
If I do anything wrong during the step?
If not... what's wrong? why i can't render the timeline, and why i can't export to HD?
Or if there is a "way" to figure out what file is corrupted..?
This is not first time I have the same problem, I even tried to test out with 10,000 jpgs frames and create mov ... and import in FCP5..etc...
I had no problem with render and export... so I don't think it's the "HD length" issue...
If anyone have the same issue or know what's wrong... please help!!!
Thank you,

I downloaded iview Media pro free trial version to catalog the image to see if there is any corrupted jpgs.
Unfortunately, it didn't find any corrupted jpgs.
I also tried to change the sequence setting, under "QuickTime Video Setting" from "DVCPRO HD 720p60" to "HDV 720p30" (since I found out the frame size for DVCPRO HD 720p60 is 960x720 with 59.99 fps).
The result I get after I placed mov on timeline, it used to give red bar, it gave me orange bar... which made me be able to render the timeline without problem.
However, Compressor still is not able to export HD mpg2.
Then I changed QuickTime Video Setting from HDV 720p30 to "photo-jpg", the bar is now grey, but still not able to export to HD mpg2.
now I don't really don't know what's going on.
anyone can suggest me what else I can try and see...??

Transitions won't render all the time

When publishing my finished Captivate file, sometimes the transitions that I selected won't render. Or some will render and others won't. In order to fix it, I have to open my project, and go to each slide that needs a transition, change the transition to No Transition, then back to Fade, or whatever transition I was using. Then when I publish the file, I keep my fingers and toes crossed because it might or might not render them all. Is there a fix on the way to ensure that transitions are not ignored when rendering?

Hi,
Re-publish the project selecting "Force re-publish all the slides" checkbox in "Advanced Options:" of publish dialog.
Let me know if it resolves your issue.
Thanks,
Vikranth.

Transitions fail to render

Similar Messages

Maybe you are looking for