Transitions still screwy. Can somebody help me understand how this works?

I'm struggling to understand why my transitions and/or titles aren't working right when exporting.
On the video I'm currently putting together I'm using the scrapbook theme.
When I preview the video it looks perfect but when I export it I get this:
During the yellow "title" sequences, the video is supposed to be running inside a "photo frame" graphic and then at the last 1/2 second or so zoom right into the remainder of the video. What happens instead is that the video gets to the point where the title graphic is supposed to zoom gracefully into the video and instead it just cuts right to the video. The inverse happens at the beginning of the title sequence as well.
I have two links that illustrate this. One is a screenshot of the section of the project in question and the other is a video of the preview with the quicktime .mov running underneath it.
Sorry for the crappy quality of the video with the watermark. It's clearly not worth the price their asking to get rid of the watermark since it's nowhere near that jerky on my screen.
Any help you can give me would be great. This is happening on almost all these titles in this project and has happened a lot in the past.
http://www.mvlawn.com/screenshot/Screen%20shot%202009-11-16%20at%206.25.36%20PM. png
http://www.mvlawn.com/screenshot/iShowU-Capture.mov
(Ignore the exclamation triangles, I didn't have my external drive plugged in when I took the screenshot)
THANKS!!
Message was edited by: Kevin Berube

One thing to keep in mind is that when you have a transition (it looks like you are using Fade Through Black), it takes half the frames from the preceding clip and half the frames from the following clip. Si if you have a 1/2 second fade through black, it needs 8 frames from the preceeding clip and 8 frames from the following clip.
But you have the photo album title also contending for those same eight frames.
I think you would get better results if you either
1) removed the fade through black transition, or
2) moved the start of the title to the right so that it started on the 9th frame or later.

Similar Messages

My new I5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?

Hi there everybody,
My new Iphone 5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?
Some help will be greatly appreciate.
Thanks much!

When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details.

Can anyone help me understand how font sizes work in Mail?

Hi
I am used to writing and sending emails in Arial 10 (on my PC using Outlook) - it seems like a professional sort of size to send to people.
So I have set the Mail Preferences Fonts to Arial 10 for the message font
But when I receive emails, the font is so small I can barely read it. I have a new 24" iMac and just cannot get to grips with keeping font sizes at a reasonable level between applications. And I though Mac was supposed to be joined up....
As I write the text of this posting, the font is a good size to read (although still looks blurred - see my other postings) - it is in Arial which I want.... But I cannot get Mail to wrk in the same way.
I do not want to change the font size to the email messages to a bigger font size, as I want my outgoing messages to be received in font size 10.
Please help me understand how this is all supposed to work in MAC? It was all so easy on a PC!

No, it is one of several unfathomable shortcomings in Mail that you are unable to set a minimum text viewing size. I too have 24in iMac and I have to enlarge each incoming message manually using Cmd+ and this is frankly Stone Age stuff, especially when dealing with hundreds of emails every day. Another very poor alternative is to use Ctrl and the scroll wheel to zoom in but your head will soon be spinning as the screen moves around.
FWIW, I am also dismayed that Apple has disabled the Contextual Menu in 3 of the 4 mail address fields. There must be some obscure justification for limiting CM copy and paste to just the Subject field but I just think it's risible.
And why can't I save a message I have just written to a place of my choosing? Instead I must save it to the Drafts folder or send it first and then Save As from the Sent mailbox. Is this someone's idea of fun?
I could go on about Mail's shortcomings but that's enough ranting for now...
Simon

How much does this cost? & I still can't understand how this work

How much does this cost? & I still can't understand how this work

Hello mkopti,
ePrint is a free feature include on most of our wireless printers that are e-all-in-one enabled. It allows you to register your printer on HP's website http://www.eprintcenter.com and create an account. Once an account has been created you can enable the web services feature, after connecting to a valid network with internet access, which will print off a registration code you can use to add the printer to your account and customize an email address for the printer. This allows you to print to the printer from virtually anywhere simply by sending an email to the printers email address and when it is received it will print.
Most of these printers are also Airprint enabled meaning you can print locally from the same network on the iPad, iPod, and iPhone (version 4.3.2 and higher) by using the built in "Print" command in the idevices.
If you have any other questions or need clarification feel free to reply to this post and I will try to answer any questions you have.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can somebody help me on how to create Search help exit?

I have requirement where in i have to use search help exit in search help .Based on the value in the GET parameter id i have to extract the value in the search help can somebody help me in this.

HI
In order to offer a meaningful input help for as many screen fields as possible, the R/3 System uses a number of mechanisms. If there is more than one such mechanism available for a field, the one that is furthest left or at the top of the above hierarchy is used.
In addition to the options described above for defining the input help of a field in the ABAP Dictionary, you can also define it in the screen field. The disadvantage, however, is that there is no automatic reuse.
With the screen event POV, you can program the input help of a field by yourself. You can adjust the design of the help to the standard help using the function modules F4IF_FIELD_VALUE_REQUEST or F4IF_INT_TABLE_VALUE_REQUEST. However, you should check to see if the part of the input help that you programmed yourself should be implemented as a search help exit instead (see Appendix).
You can also attach a search help to a screen field in the Screen Painter (Module Pool programming). There are some functional restrictions on this kind of attachment as compared with attachment in the Dictionary.
You should no longer use the input checks defined directly in the flow logic of the screen, from which it is also possible to derive input helps.
The function Technical info is offered in the hit list in the menu of the right mouse key. It can be used to find out which of the specified mechanisms is being used.
Check these links
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
check out this link, it gives step by step example of implementing search help exit.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/implementing%2bsearch%2bhelp%2bexits

Itunes 64 bit wont install on my Dell XPS due to Windows Installer problems. Can somebody help me out with this?

I have Windows 7 home premium, running on a Dell XPS 15, with 64 bit OS, and when i went to install itunes for my new phone, it would almost install, but then say that it couldn't install due to issues with windows Installer. has anybody had this happen to them? can anybody help me out with this?

Many thanks.
"There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Need a Little Help with Understanding How Layers Work in PSE

I have PSE version 5 and I am using it on a PC with Windows XP.
As I get more into editing photos, I am enjoying it, but confusion is also starting to set in. My question is about layers. When I go to edit a photo for web/email use only, I start by resizing it to 72 ppi and then reducing the pixel dimensions quite a bit. Then after that I normally go through this process of editing the photos by using normally about three different commands. One is Levels, then I may go to Shadows/Highlights, and then my last command is always sharpening. I used to do this all on one layer, but then finally learned to put each one of these editing features on their own layer so I can make changes/deletions without too much trouble.
When I started doing the separate layers, I was just making a copy of the background layer each time and then touching that particulay layer up with Levels, Sharpen or Shadows/Highlights. But I noticed that depending on the order in which the layers were placed, some changes would be obscured. If I put the Levels layer on top, and then the Sharpen layer and the Shadows/Highlight layer below that, the sharpen effect and the shadows/highlights effects were no longer there. I could only see the levels effect. The photo was still not sharp and so on. If I put the Sharpen level on top, then the photo showed the sharpen effects, but now the Levels and Shadows/Highlights effects were no longer visible.
So then I started to make a copy of the background initially, do a levels adjustment here, then, instead of making a copy of the original background layer again, I would make a copy of the layer that now has the levels changes on it. Then do the sharpen effect on this layer. This way I had all the changes on one layer as long as I put that layer as the top layer. But then I realized that I once again fI didn't have a layer with only one fix on it. Finally, I started to use an adjustment layer for Levels, put this as the top layer, make a copy of the background layer, do shadows/highlights, copy background layer again, do sharpen, and this seems to work a little better. But even with this way, depending on what order I place the sharpen and shadows/Highlights layers, one of them still seems to get obscured by the layer above it.
Can someone help me to understand how layers work in this regard. I am obviously a little confused here.
Thanks,
Lee

You really aren't working efficiently. First of all, do your editing on a full sized version of the photo, since you have more data for PSE to work on and will get better results. Use save for web to make your web/email copy when you are totally done. You can resize it down on the right side of the save for web window.
Duplicating a regular layer makes an opaque layer that obscures the layers below it. It's best to start off by not working on your original image, so that you don't have to worry if you mess up. If you're working on a copy, you can work right on the background layer, or only duplicate the layer once and apply your changes to that. So you'd apply both shadows/highlights and sharpening to the same layer.
Finally, you should use an adjustment layer for levels. Layer>New Adjustment Layer>Levels. This will put levels on a transparent layer above your image, but you will need to click the layer below it to get back to a pixel layer to apply other changes (you can't sharpen an adjustment layer, for example).

I really dont understand how this works

alright first off this isnt for a school assignment so please dont feel guilty about "giving it away"
alright so this has to do with something called gridworld, if you ever seen it you know what it is, if you havents its basiclly a java built world that has bugs, rocks, flowers, and other things.
(here is a video showing the basics of gridworld http://www.youtube.com/watch?v=ZnWGOT5Bd2E&feature=related). i program in JCreator btw not greenfoot.
alright getting to the point i have the code for a bug someone build called a "chameleoncritter". what the bug does is change colors depending on what it is next to, so if it is next to a pink rock it changes pink, ive been reading the code and can honestly not figure out how this method changes its color depending on what it is next to. here is the code
* AP(r) Computer Science GridWorld Case Study:
* Copyright(c) 2005-2006 Cay S. Horstmann (http://horstmann.com)
* This code is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
* This code is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* @author Chris Nevison
* @author Barbara Cloud Wells
* @author Cay Horstmann
import info.gridworld.actor.Actor;
import info.gridworld.actor.Critter;
import info.gridworld.grid.Location;
import java.util.ArrayList;
* A <code>ChameleonCritter</code> takes on the color of neighboring actors as
* it moves through the grid. <br />
* The implementation of this class is testable on the AP CS A and AB exams.
public class ChameleonCritter extends Critter
     * Randomly selects a neighbor and changes this critter's color to be the
     * same as that neighbor's. If there are no neighbors, no action is taken.
    public void processActors(ArrayList<Actor> actors)
        int n = actors.size();
        if (n == 0)
            return;
        int r = (int) (Math.random() * n);
        System.out.println(n);
        Actor other = actors.get(r);
        setColor(other.getColor());
     * Turns towards the new location as it moves.
    public void makeMove(Location loc)
        setDirection(getLocation().getDirectionToward(loc));
        super.makeMove(loc);
}if anyone can explain to me how this works it would be excellent.
one more thing, here is a link to the gridworld api (list every method and class and its function).
http://www.horstmann.com/gridworld/javadoc/
Edited by: vouslavous on Apr 17, 2009 8:51 PM

public void processActors(ArrayList<Actor> actors)
        int n = actors.size();
        if (n == 0)
            return;
        int r = (int) (Math.random() * n);
        System.out.println(n);
        Actor other = actors.get(r);
        setColor(other.getColor());
}Randomly selects a neighbor and changes this critter's color to be the same as that neighbor's. If there are no neighbors, no action is taken.
Mel

Hi.. I keep getting error message " No sim card installed " .. Can somebody help me out in this issue ? please

This message keeps coming almost now regularly too often .. Please somebody help me how to solve this .. I have tried removing the sim card but it is of no use ..

Hello henry lfrommiami,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
Update your iPhone to the latest version of iOS.
Turn airplane mode on and then off again.
Restart your iPhone.
Check for a carrier settings update. Go to Settings > General > About. Install any available update.
Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
Restore the iPhone.
If you still see the issue, contact Apple support.
If you see 'No SIM' alert on iPhone
Cheers,
Alex H.

Can someone help me understand how I can use cable cards with external digital tuners?

Here's my situation. I currently have a PC with an internal TV tuner card. I connect the internal TV tuner card to a standard QIP2500-2 Set Top Box. I've never been very happy with this setup, although it mostly works. But, I can only record or watch one channel at a time. In addition, changing channels requires a silly IR blaster so changing channels from Windows Media Center uses the IR remote signals to change channels on the set top box.
I was thinking I could use a product like this together with a cable card from Verizon, eliminating the set top box. I read the FAQ here but I am still unclear about how cablecards work and what capabilities they enable. My questions are:
1) The FAQ says using a cablecard eliminates the use of the online TV guide. How then does one schedule recordings in windows media center? It would seem silly to have to still have a STB just to get the program guide. What do others do about this?
2) Are the cable cards provided by Verizon compatible with the above product shown in the link? The Verizon FAQ says the device must be marked "DCR" to be compatible, but looking at all the digital tuner products at NewEgg, none of them seem to be marked with "DCR". They say, "m-CARD".
3) What are others out there doing to utilize FIOS TV with a computer and not have a set top box?
Thanks for any insight!

I haven't used the SiliconDust product, but I have been using a similar product by Ceton, for nearly five years.
By inserting a CableCARD into the tuner, you would have access to the same channels as a set-top box. You rent a cableCARD from Verizon, just like you'd rent a set-top box from them. I have an m-card, which just allows multiple channels to be tuned at once, unlike the older s-card.
You do, however, lose Pay Per View and on-demand programming. For me, it's not a great loss.
The program guide is handled through Windows Media Center, which holds programming data for the next 14 days. You schedule your recordings there. It's also smart enough to reschedule shows, if there's a recording conflict (too many scheduled shows, not enough tuners)
Although you can contunue to use an IR blaster (I use one), you can also get a Media Center companion app from Ceton. It doesn't require a Ceton tuner...it will still control Media Center. The app costs a few bucks, but it's worth it. They make it for Android and Apple, and maybe Windows Phone. It will let you manage your schedules, and use your phone/tablet as a remote control over WiFi.
Buy a big hard drive to hold your scheduled recordings. Expect to use an average of 10-15 gigabytes per hour of HD recording. The beauty of this system, is that you can just add another hard drive whenever you need more space, sonething the STB's won't let you do.
For service in other rooms, use an Xbox360 if you have one. Or, buy a Ceton Echo extender (again, doesn't require a Ceton tuner). Don't use Wi-Fi for your extenders. Wired Ethernet is a must...most wireless won't be able to keep up.
Hope this helps.

Can someone help me understand how ePub CSS @fontface Unicode characters are supported in td , but not in div or other elements?

Hi,
I'm working on a project to convert several hundred thousand life sciences articles into epub format, and we have run in to a problem with character entities.
Being that these are scientific articles, the characters are from a wide range of Unicode charts, and are essential to transmitting the meaning of the data.
The problem is that in my epub, the character entity inside a table data cell is rendering the @font-face correctly, but inside any other HTML element, the character renders as an empty box on our ipad2s.
I've placed pre tags in hopes that the unicode will not be rendered in your browser here. The code point in this example is x1d542 just in case.
So inside div, we see boxes, inside td, we see the character rendered properly.
<pre>
      <div class="stix">Let 𝕂 be a field, which will be either the complex numbers ℂ or the finite field 𝔽</div>
      <table id="t31" rules="all">
        <tr>
          <td>𝕂</td>
          <td class="stix">𝕂</td>
          <td>U+1D542 MATHEMATICAL DOUBLE-STRUCK CAPITAL K </td>
        </tr>
</pre>
My CSS looks like this:
<pre>
@font-face {
    font-family: 'STIX';
    src: url('STIX-Regular.otf') format('opentype');
    font-weight: normal;
    font-style: normal;
    unicode-range: U+02B0-02FF, U+07C0-07FF, U+0900-097F,U+0F00-0FD8, U+1D00-1D7F, U+1D80-1DBF, U+1D400-1D7FF, U+1E00-1EFF, U+1F00-1FFE,U+2000-206F, U+20A0-20B8, U+20D0-20F0, U+2300,23FF, U+25A0-25FF, U+2600-26FF, U+27C0-27EF, U+27F0-27FF, U+2900-297F, U+2A00-2AFF, U+2B00-2B59, U+2C60-2C7F ;
@font-face {
    font-family: 'STIX-Math';
    src: url('STIXMath-Regular.otf') format('opentype');
    font-weight: normal;
    font-style: normal;
    unicode-range: U+02B0-02FF, U+07C0-07FF, U+0900-097F,U+0F00-0FD8, U+1D00-1D7F, U+1D80-1DBF, U+1D400-1D7FF, U+1E00-1EFF, U+1F00-1FFE,U+2000-206F, U+20A0-20B8, U+20D0-20F0, U+2300,23FF, U+25A0-25FF, U+2600-26FF, U+27C0-27EF, U+27F0-27FF, U+2900-297F, U+2A00-2AFF, U+2B00-2B59, U+2C60-2C7F ;
.stix   {
        font-family: "STIX", "STIX-Math", sans-serif;
</pre>
Is it possible that this is a rendering bug, because the character is rendering in the table cell, but not in other elements?
Have I missed something obvious?
Thanks,
Abe

I assume you are including the STIX font as part of your epub files?
Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

I need help understanding how this works. AS 2.0

Its my first time here and i only started learning flash today. I aint too great with maths and i was showed this piece of code that makes a triangles point follow the cursor. It involved mathimatical things ( which i aint so great at) and the guy said "You dont need to know how it works, just how to use it." well i copied his code and it worked, but i have no idea how to use it in other rotation apart from the one he taught us. I dont even understand how to redo his code i saved it to a word document and anytime i wanted to make something rotate something in that fashion i would refer to that. But i dont want to have to do that, i want to know how to use it, dont have to understand it, but use it for other rotation matters. If you are going to help, please try to be a bit simmple i explaining it, cause im new. Dont get me wrong i aint thick but i can find it a bit hard to follow some things, that is i my current problem.
here is the rotation code:
onEnterFrame = function()
hero._rotation = getmouse(hero);
getmouse = function(mc:MovieClip):Number
dy = _ymouse-mc._y;
dx = _xmouse-mc._x;
rad = Math.atan2(dy,dx);
rotate = rad*180/Math.PI
return rotate+90
also if it helps, here is the video i was watching: http://www.youtube.com/watch?v=w3OfrpbNhHs
please if you can, explain how the entire thing works.
thanks for any help given in advance.

Hi,
Here's a short primer. It may not be sufficient but here goes.
1st, move the closing bracket at the end and put it on the third line. This makes the code more efficient
onEnterFrame = function(){                               // this causes Flash to repeatedly
                                                                          execute the next line at the
                                                                          frame rate you selected
                                                                          for your document
       hero._rotation = getmouse(hero);               // this tells Flash to rotate a
                                                                          movie clip (named hero) based
                                                                          on the function getmouse()
};                                                                     // putting the }; here makes the
                                                                          code more efficient and readable
getmouse = function(mc:MovieClip):Number{   // This is the function called with
                                                                         mc referring to hero that was
                                                                         passed from the second line.
     dy = _ymouse-mc._y;                                // dy means delta y which subtracts
                                                                        the y position of the movieclip
                                                                        from the mouses y position
     dx = _xmouse-mc._x;                               // dx = delta x (same as above line
                                                                        but on the x axis)
                                                                     // once you have the x and y sides
                                                                        you male a triangle.
                                                                        Now use trig to find the angle
     rad = Math.atan2(dy,dx);                           // the computer works in radians
                                                                        the arc tangent atan2 will give the
                                                                        angle in radians
     rotate = rad*180/Math.PI                            // you want to convert the radians to
                                                                        degrees, that's what this line does
     return rotate+90                                         // this returns the value of rotate back
                                                                        to the calling function in line 2.
                                                                        the +90 determines which part
                                                                    // of the hero movie clip is facing the
                                                                       mouse.
If you put the mouse cursor over any of the green reserved words above in the Actions panel you will get a desctription of what these do.
hope that helps.

Can somebody help me understand this dialog window?

I have an English CS3 but my native language is Dutch. I struggle understanding this dialog box:
Your current color settings honor CMYK profiles in linked content but profiles were set to be ignored when this document was created
I often get this error when opening downloaded files.
What linked content? Which profiles are ignored. Is this a vital warning?
Thanks,
Ronald

Most imporant: set up color management. Synchronize color management across your applications and versions.
If you don't know how to do that, you're in really serious trouble. There's some literature on the topic. Get it and read it. You might start with this:
Adobe publishes a new Creative Suite 5/5.5 Printing Guide - Rufus Deuchler
and the manual. Look for a Lynda.com training or search the web for resources. There's some really good stuff available in German, but I don't know about the English resources (beacause our own are so luxurious).
The dialog box tells you that your settings regarding linked CMYK images were different in your other Illustrator version. You had it set to "Preserve embedded profiles", but now you've set it to "Preserve numbers". Depending on the nature of your files, your workflow, your co-workers' workflows or the printing process both settings might or might not be correct. But most probably changing the settings in the middle of working at the same file is not correct. The setting influences how colors are converted when creating the final output. So, yes, it is important.

Can anyone help me understand what this problem is with Desktop Manager that I am having???

Hi everyone! I have downloaded the Desktop Manager Software on to my desktop. I've clicked on the "media" option in the main menu.
I am brought to a screen that has 2 options. "Media Manager" and " Blackberry Media Sync".
Now, I want to download themes and wallpaper, but in order to do that, I need to select "Media Manager" correct? ... Unfortunately this option is not available. I have my blackberry on, and is connected to the USB port. I am able to click "start" on the "Blackberry Media Sync" option, but not on Media Manager. If anyone could help me out, this would be greatly appreciated. I am going absolutely insane trying to figure this out! Thx for your help!!!!
Much appreciated
~Linz

It seems clear to me that if you unplug your AirPort Extreme and those Wi-Fi networks still appear, they are not being created by your Extreme but by someone else's router. They won't be useful to you.
To eliminate confusion, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button. In the "Preferred Networks" list, select each Network Name and click the "–" (minus) button. Check the box "Remember networks this computer has joined". Click OK, then Apply.
Then select your PalmSprings network in your Mac's Wi-Fi menu. Ignore any others that may appear there.
If you still have funky problems, try renaming your AirPort Extreme's network to something other than PalmSprings. Use "Palm Springs" (including the space character - spaces are OK) or something else. Other networks with similar or identical names will just confuse things.
Use a non-trivial WPA/WPA2 password for your Wi-Fi network. Give your Extreme base station a non-trivial password as well. These ought to be different from one another, but are not required to be. Doing so will preclude any concern about your network being "hacked".

Help understand how this works

Hows everyone doing, i need some help understand this. This is my first time using Lulu. From the reviews i'v read about it they tell me this is the #1 place to come to to get my books printed. Here the question, i have all 3 of my books ready to be uploaded do i just sent that in, then they send me the prints ? or so they self them for me. Sorry if this seems like a dumb question, but its my first time using this particular site.

Here's a quick overview:
You start the new book wizard. Click "Create," pick a book type and size (hardcover, paperback, etc.; 6x9, 8.5 x 11, etc.), and click "Make this book."
Hint: If you want the widest distribution for your book, pick a size / type that has a green checkmark next to it.
The wizard will guide you to name your book, apply an ISBN (or get a free one), upload your contents, and upload your cover or design a cover. It will guide you to set pricing and distribution, and many other options.
When you've done all that, your book will be available to order. You will see two prices: the one you pay, and the one other people pay. The one you pay is the printing cost per book. It may be anywhere from $2.50 to $20.00 or more, depending on options you pick -- probably coser to the low end.
On that first page, where it says "Create," there is a calculator that will figure roughly what your book will cost (printing costs), so you can plan your options around that calculator.
So you order as many books as you want, pick shipping, pay with a credit card, and in a few days, the books are on your doorstep.
I hope that helps.

Transitions still screwy. Can somebody help me understand how this works?

Similar Messages

Maybe you are looking for