Translate Hoover Collaboration Link in Tool Area
Hello,
Does anyone know how to change the translation of the hoover description of the collaboration link in the Tool Area? I already tried by translating the Tool Area iView, but it doesn't contain the label 'Start the collaboration launch pad.
Looking forward to your reply.
Kind regards,
Joost Christenhusz
Hi Shashank,
See the link below:
http://help.sap.com/saphelp_ep60sp2patch5/helpdata/en/dc/935f3e1e7d7937e10000000a114084/frameset.htm
Here go to Collaboration->Administration Guide-> Basic Configuration-> Configuring the masthead for collaboration.
The above configuration has to be done to launch the CLP.
Hope this helps.
Regards,
Pooja.
Similar Messages
-
Urgent - enabling the collaboration link in tool area
hi
I had followed the following link for displaying Collaboration link in the Tool Area in portal.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ee2c740aed4fcfe10000000a422035/frameset.htm
Also i had assign full control permission to the users.
But still i m not able to see the link .
Can any one tell what should be done...
Thanks
shashank
Message was edited by: shashank moharanaHi Shashank,
See the link below:
http://help.sap.com/saphelp_ep60sp2patch5/helpdata/en/dc/935f3e1e7d7937e10000000a114084/frameset.htm
Here go to Collaboration->Administration Guide-> Basic Configuration-> Configuring the masthead for collaboration.
The above configuration has to be done to launch the CLP.
Hope this helps.
Regards,
Pooja. -
Hello all,
I'm trying to put a link on tool area iView. I know that tool area has a property EnableLink1.
I've tried to filled EnableLink1 with PCD address but it's not working.
Does anybody knows how to put an external on tool area iView?
Thanks,
Andre
My landscape:
- EP6 SP11
- CM and KM SP11
- WebAS 6.40 SP11
- Oracle 9.0.5 database
- Everything installed on a Windows 2003 Server with all patchesHi Pradeep,
Have you read my following weblog.
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
the above is one alternative. You could also write a JDBC application that stores alert and then display alert when it finds it in the database. If you send an email at psingh(at)ust.net, i could send you see this example.
Regards,
Prakash -
Hi,
I gone thro a PDF in
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073623&_SCENARIO=01100035870000000202..
This PDF is for configuring links in tool area.
For configuring links, I have to set 2 properties:
(1) Enable Link1 & (2) Enable Link2
But I could not find these two properties. Navigate thro
Content administration -> portal content -> portal users -> standard portal users -> Default Framework Page -> Tool Area iView -> click Open
In the properties list, I didnt find Enable Link1 and Enable Link2 Options.
What could be the problem?
Kindly provide me a solution.
Thanks & Regards,
DhanaHi Laksmi,
You can directly enable those two links in the default framework page. see the below path:
Content Administrator --> portal content --> Portal Users > Standard Portal Users> Default Framework pages .
Now select the toolarea iView and its properties , there you can find those two links i.e Enable Link1 & Enable Link2. Make them as "True". and refresh the portal .
If it is helpful , Reward Points.
Cheers
Venkat -
Collaboration Room Link on Tool Area Bar. Possible?
Hi All,
we have collabration rooms which dispays under My rooms for a particular user.Now a user wants to access a single room from somewhere Tool Area iview so that he need not have to navigate to next page for My room iview and then access.
We can do that by changing the URL link of help option with room URL,so that he can click on Help on Tool Area and acees it.But how can i change the name from HELP to some other.I think its not possible?please Confirm.
Is there any possibility to add one more link same as HELP
somewhere on Tool Area and give Room URl to access the room.
Or anyother good option.
Thanks in AdvanceHi Rani,
to 1:
You wanted to know how to change the name "HELP" in the toolarea iView, because as you correctly said, to change the link you only need to change an iView parameter. So only for the label "Help" you need to touch the PAR file. But actually I was misguided by your text, cause the Help link is in the masthead iView and not in the tool area, so you need to change the text in the localization files <b>headeriView_nls(_XX).properties</b> located in <b>com.sap.portal.navigation.masthead.par</b>
to2: For achieving that the links are only visible for some specific users you need to implement some additional logic in the <b>ToolAreaiView.jsp</b>
Hope that answers your doubts and your question,
Robert -
Adding URL Links to Tool Area iView in Default Framework Page
We want to add a URL link to the Tool Area iView in Standard Framework page. When we edit the property "EnableLink1" and "EnableLink2" property to "True" of Tool Area iView, it shows two links in the tools area without actual links.
Where do we add these links?
Thanks.
PKHi,
In EP 7.0 SP21 no show the EnabledLink1 and EnabledLink2,
Was deprecated?.
Must to edit the par file to insert it?.
Thanks -
How to enable Collaboration link
hi,
Can any one tell me how to enable Collaboration link in tool area.
thanks
swatiHi,
Goto <i>Content Administration</i> -> <i>Portal Content</i> -> <i>Portal Users</i> -> <i>Standard Portal Users</i> -> <i>Default Framework Page</i>.
Check <i>Tool Area</i> and click <i>Propertie</i>s. Set <i>Enable Collaboration Launch Pad</i> to <b>Yes</b>.
Best Regards,
Avishai Zamir -
Collaboration link from the tool area
hello,
has anyone any ideea how can i change the name of the link "collaboration" from the tool area, from the left of search.
thxHi,
Import the file <i>com.sap.portal.navigation.toolarea.par</i> from the portal, open it with NWDS, look for the file <i>toolAreaiView_nls.properties</i> inside <i>PORTAL-INF\private\classes</i>. find the CLP_LINK_TEXT and change the value to whatever you want. you can also change the files of the individual languages.
Redeploy the par file back to the portal.
It is better if you can deploy it as your own toolarea for future upgrades.
Best Regards,
Avishai Zamir -
To Hide "Collaboration" option-link in Tool Areal level
Hi,
I want to Hide only the "Collaboration" option-link in Tool Area level,expect "search" and "advanced search" option.
can any one tell me the way of approach for hiding the "Collaboration" Option link in the Tool Area Level with out hiding the "search and advanced search option".
Thanks in advance.
Regards,
RaviHi Ravi,
Go to Content administration -> Portal content.
Under Browse tab, click Portal content -> End user content ->open Default framework page.
Check toolarea iview and open its properties <b>'Enable Collaboration Launch Pad'</b> and set it to NO.Also go to <b>cache validity period</b> property and set all the hour, min, sec values to<b> 0(zero).</b> Refresh the portal and you will see the collaboration disappeared. After it hides enter the same value in cache validity period as before.
Regards,
Ganesh N -
Tool area and language dependent links on KM content
Hi there
we are facing the problem that we are using Imprint and TAC in the tool are of the EP6 SP19.
we link those items to KM documents.
Because we want to display the language dependent KM documents we used
the root URL for those sections.
In the KM we created below this root URL the folders for the languages de,en, es, fr and so on. Within this folder we stored the KM Document which is also specified in the tool area iView as the start page.
We are now facing the problem that users with a browser language that is not maintained in the KM folder structure will not be able to see the Imprint or TAC unless the specify a language in the Personalize area.
To you have any solution how we can avoid creating all language folders in the KM structure.
Is it somehow possible to define a default like in the URL iView.
RegardsHi,
First you need to arrange the KM content in different folders based on the language. Let say if are displaying help file.
Then in KM you need have folder Help following by sub folder for each language. Under these folders you will need to maintain the translated documents.
Now develop a custom abstract portal component ... implement the method doOnNodeReady()...
under this method, get the logged in user and his language.
request.getUser().getLocale();
will provide you that. Now dynamically build an url for the KM document to be displayed.
e.g.
String url = "/irj/go/docs/documents/help/"+request.getUser.getLocale()+"help.html";
Once you have the url, then you need to forward the request to this url using the below code:
request.forward(url);
Regards,
Mahesh
Edited by: Mahesh Krishnapillai on Dec 20, 2011 9:48 AM -
Email Pop Up window on click of tool area Link.
hi
i have three links say Link 1, Link 2, Link 3 in my tool are.My requirement is to have an email pop up opened with a defaulting email address in the "To" field to report an error or a query to the Link 3.
Is it possible to implement this functionality in EP 6.0? if yes please tell how to proceed.
thanx
Disha.hi
i dint get much from this link, could you tell me in different approach.
i know how to give href to a link in the tool bar, but here i need the email pop up window with some default address.
I follow the same, as given in the link, Have applied to code:
< A href="mailto:[email protected]" target = "new".....</A>
Anything else i need to add in the html code because this way it is not working.
thanx
Disha -
I just purchased two books in the app store , unfortunately they are in German . Is there any way I can get a refund , an Ibook translator or a link to convert ibooks to pdf so I can translated it??
sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde -
How can I modify the description and to include the links in:
Framework- Tool Area (com.sap.portal.toolAreaiView)?
Thanks,
MercedesHi Mercedes,
what do you mean with description?
You can mdify the too area as follows:
Locate the PAR Archive "com.sap.portal.navigation.toolarea.par" and axtract it. Look fot the file ToolAreaIview (PORTAL-INFjsp) and modify it to your needs. Make a PAR-File back and deploy it to the portal.
Hope that helps
Best regards
Jörg
Message was edited by: Jörg Heyne -
Can anyone suggest what tools are available to translate Framemaker 11 dita files into other languages? Thanks
"FrameMaker 11 dita" files are no different than DITA XML files, so you can use any translation tool which can handle that format: SDL Trados Studio, Swordfish, ....
TIP: Make sure you translate the DITA XML files, NOT the binary .fm files!
Cheers
Yves Barbion
www.scripto.nu -
Hi,
I have enabled Link2 in tool area and went into Collaboration Content--> Link Commands > link2> and added www.cnn.com in the reference and restarted the server. The properties I have set are..
valueFactoryKey * = LinkCommandValueFactory
labelKey = label2
resourceBundle = test.properties
launchtype = window
reference = http://www.cnn.com
My problem is I can see the Link2 in the tool area but I cannot launch cnn website when i click. Nothings seems to be working. Am I missing something or do I have to configure anything else.
Thanks in advance,
PraveenHi Praveen,
actually there is a simple explanation for your problem. If you check the ToolAreaiView.jsp in com.sap.portal.navigation.toolarea you will find this piece of code:
<TD nowrap>
<%if (isEnabled(profile, ENABLE_EXAMPLE_LINK2)) {%>
<A href="#"class="prtlToolAreaTaskText" title="<%=exampleLink2TooltipStr%>"><%=exampleLink2TextStr%></A></TD>
<TD nowrap class="prtlToolAreaTaskDivider">
<%}%>
</TD>
As there is no function implemented for the clicking on the link as it is for CLP, this CAN NOT WORK!
Here the lines for CLP:
<%
if (isEnabled(profile, ENABLE_CLP)) {
%>
<A href="#"class="prtlToolAreaTaskText" onClick="openCollaborationLaunchPad(); return false;" title="<%=clpLinkTooltipStr%>"><%=clpLinkTextStr%></A></TD>
<TD nowrap class="prtlToolAreaTaskDivider">
<%}%>
You might implement such a function also for opening the configured link for this to work, or wait till SAP does!
Hope this helps,
Robert
Maybe you are looking for
-
How to NOT use my iTunes Account Balance on a purchase
I run a photography Business where I need sometimes need to make App Store purchases, but I do NOT want the purchase to use my Personal Gift Card Itunes Account Balance since for Tax purposes, I want to use my Business Credit Card and leave the Gift
-
Error message: You cannot save a completed copy of this form to your computer.
Hello, I created a PDF form in Acrobat Pro X and i am trying to distribute it by placing it on our shared drive so employees can take it from there and save it to their own computer. I tested the form with some employees that have Reader. Some can op
-
Oracle 8i with Developer 6 on Solaris platform
is it possible to install the Oracle8i with Developer 6 on the same Solaris machine, I did try it, but it seems it will crash the Oracle 8i, any idea, many thanks.
-
Unable to connect to internet - On-Board Ethernet Grayed Out
Hi, This is my first post.... I have had my iMac for 2+ years and have had no issues. I recently updated to the beta version of Safari and had issues with hotmail not working. So I uninstalled and went back to the "old" Safari. When I did this iTunes
-
Can't Open Adobe Story Script File
I have cleared my cache and tried other browsers and still..can't access my saved script. I can see the file, but when I click on it, the page is blank. Don't understand? Any insights?