Translation / consolidation cannot be completely correct conducted

hi,
has anyone the similar situation as us?
Base entity (value: EUR) ->parent company 1 (value: USD) -> parent company 2 (value: EUR)
the consolidation and translation on the first level (parent company 1) are going well. But if we wanna a consolidation on the second level (parent company 2, which has the same value as the base entity), the value cannot be always correct translated from bottom to top, namly from EUR to USD and then to EUR again.
Now we have to force translate every time after consolidation.
Anybody has a better way? Any advice would be highly appreciated.
thanks in advance
kind regards

This doesn't make sense, so we need more details. If you have an entity hierarchy:
Parent2 (EUR)
- Parent1 (USD)
- Base Entity1 (EUR)
Then upon consolidation of Parent2 you will find BaseEntity1 gets translated into USD (you will see this in it's parent currency), and it's contribution total goes to Parent1 in USD. Parent1 in turn gets its <Entity Currency> which is in USD translated into EUR which is its parent's currency, and in turn contributed to Parent2. You should see this without need to force translate.
Now it's possible that EUR to USD back to EUR may be a different value than you started with, depending on your GAAP rules, and any possible adjustments or eliminations, so please elaborate on your example and perhaps we can assist.
--Chris

Similar Messages

When starting I get an error: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. "

Each time I start up Firefox 4.0b6 I am getting the following error message: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. ". I run Firefox 3.6 as my standard Firefox browser in paralell.

See https://bugzilla.mozilla.org/show_bug.cgi?id=588511
(please do not comment in bug reports)

The optn cannot be completed because of an internal failure. A secure network communication has not been cleared up correctly.

Firefox 4.0 b 5 - was doing an update but gave this error message: The operation cannot be completed because of an internal failure. A secure network communication has not been cleared up correctly. - only option = OK

This is a known bug and it is being worked on.
The relevant bug report is [https://bugzilla.mozilla.org/show_bug.cgi?id=588511 Bug 588511], but please do not comment on the bug report.

Tough Problem: This action cannot be completed because the other program is busy. Choose 'Switch To' to activate the busy program and correct the problem

Please, please help us!
We have an intermitant problem which is badly affecting a group of our users. Can anyone help identify what SERVER this message is talking about???
Details: CF-19 Panasonic Tough Book, McAfee Enterprise 8.7i, Windows XP 2005 Tablet Ed. SP3.
Problem at login intermittantly we get a unmanagable/unresponsive window stating the following:
Window Name: Server Busy
Text: This action cannot be completed because the other program is busy. Choose ‘Switch To’ to activate the busy program and correct the problem
Buttons: Switch To, Retry, Cancel (Grayed out)
Event Viewer Message:
Source: DCOM, Type Error,
Description: The server
{D6E88812-F325-4DC1-BBC7-23076618E58D} plus others with {6B19643A-0CD7-4563-B710-BDC191FCAD3B} did not register
with DCOM within the required timeout.
I searched the registry for {D63.....} and found keys relating to "TCServer.exe" Little info available. But found
((KB895953 - Memory Leak in Windows XP Tablet PC Edition )) but this seems related to a pre SP3 update.... we have SP3 installed can I still install this patch?
I searched {6B1....} and found keys relating to "TSFManager". Again little information available.
How can I identify the servers with the long {XXXXXXXXX} keys, and what is tcserver.exe?
Please help,
Tony Heslington.

Hi,
If the problematic XP PC is in a domain, please provide us more information on it, such as how many DCs, member servers and the OS versions. Does the error only
occur on one XP PC? Does the issue occur when logging on as some certain users? When did the issue begin to occur? Have you installed software, hardware or updates recently?
Please check whether the error occurs in Clean Boot mode.
1. Click "Start", go to "Run", and type "msconfig" in the open box to start the System Configuration Utility.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click Disable All (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Restart your computer. If the "System Configuration Utility" window appears, please check the box and click "OK".
What is the result? For further assistance, please help gather the following information for research:
Event log
=========
1. Click "Start", click “Run”, input "eventvwr" and press Enter.
2. Expand the "Windows Logs" node on the left pane, right-click on "Application" and click "Save All Events As"; in the pop-up window, click to choose the Desktop
icon on the left frame, input "app" in the "File name" blank, and then click save.
3. Right click on "System", with the same method, save it as "sys".
4. Locate the two saved log files on the Desktop and send them to us.
Collect HiJackThis log
==============
1. Please download HijackThis from the following link:
http://www.techspot.com/download317.html
HijackThis is a tool to collect some system settings information which is useful for further troubleshooting.
Please Note: The third-party products discussed here are manufactured by vendors independent of Microsoft. We make no warranty, implied or otherwise, regarding
these products' performance or reliability.
2. Right click the downloaded “HJTInstall.exe” file and choose "Run as administrator".
Provide administrator password or click “Allow” if you are prompted to do so.
3. Click the "Do a system scan and save a logfile" Button.
4. A Notepad window will appear, please click “File”, “Save As...” to save it as HJT.log (or other file name you like) on the Desktop
and sent it to us.
Upload these file to the following workspace.
You can upload the information files to the following link.
(Please choose "Send Files to Microsoft")
Workspace URL: (https://sftus.one.microsoft.com/choosetransfer.aspx?key=900ac54d-301d-42da-876d-4546dc81a342)
Password: Y^dh$J1KR2u%UKL
Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text
between '(' and ')' when typing or copying the workspace link into your browser. Meanwhile, please note that files uploaded for more than 72 hours will be deleted automatically. Please ensure to notify me timely after you have uploaded the files. Thank you
for your understanding.
Thanks.
Nina
This posting is provided "AS IS" with no warranties, and confers no rights.

Upon opening LR I receive a "Server Busy" dialoge box: "This action cannot be completed because the other program is busy. Choose 'Switch To' to activate the busy program and correct the problem." I have no other programs open and when I wait a bit it cle

Upon opening LR I receive a "Server Busy" dialoge box: "This action cannot be completed because the other program is busy. Choose 'Switch To' to activate the busy program and correct the problem." I have no other programs open and when I wait a bit it clears with the 'retry' button. Happened following a recent update. I'd really like this to go away - any ideas?

For me this happens when I have Zenfolio or Facebook open in Google Chrome, even if Google Chrome is not active. If you use Chrome, when the error shows up open Chrome and close each one of the tabs and click on the retry in Lightroom. Also happens if Internet explorer is running with either of these two programs.

SharePoint Foundation 2010: search error: "Your search cannot be completed because of a service error."

Hi,
I have SharePoint Foundation 2010 running on a single server with databases, with a second server in the farm serving as a 2nd app tier. Both server have the exact same versions of SharePoint loaded (according to the Central Admin site).
Whenever I try to run a search from any site in my SharePoint Foundation 2010 installation (in this example I typed "this is my query"), it hangs for 20-30 seconds while the IE status bar says:
Waiting for http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2Ftfs2010db%2Ftfs%2FSITE1
Then it finally returns a results screen with an error that says: "Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information."
Checking the SharePoint logs under C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS, the relevant entries say the following (items I deem important
bolded):
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (HEAD:http://172.22.100.101:80/)) 11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Logging
Correlation Data xmnv Medium Name=Request (HEAD:http://172.22.100.101:80/) a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (HEAD:http://172.22.100.101:80/)). Execution Time=3.33645756653429 a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=4.3055751499143 fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.75 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/tfs/SITE1 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.77 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Query dn6r High FetchDataFromURL start at(outside if): 1 param: start 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.79 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search QueryComponentSelection aee7 Medium
Did You Mean Suggester not found. [smart2.hxx:382] d:\office\source\otools\inc\search\common\ytrip\tripoli\smart2.hxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.91 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search Query Processor e0pg Medium 1dd958fb-b605-4b3b-a676-28a3cafb2eb6:
Query completed 125 ms, detailed time: Query stage execution ms times: 0 125 0 0 125 0 0 0 Query stage cpu ms times: 0 31 0 0 31 0 0 0 Query stage hit counts: 1 1 1 7 1 0 1 1 Cursor count: 260 Mapped page count: 164 Total index count: 7 [srequest.cxx:5526]
d:\office\source\search\native\ytrip\tripoli\cifrmwrk\srequest.cxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Exceptions 1hjo
Medium Exception thrown: 0x80040e31 (d:\office\source\otools\inc\search\common\ytrip\tripoli\timeout.hxx:51 ip 0x000007FEECF099B7) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search
Query Processor e2o1 High In CRootQuerySpec::Execute - caught exception: 0x80040e31, translated to: 0x80040e31 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Administration 0000
High Log Query: More Information: Execution stopped because a resource limit was reached. No results were returned.
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1
High Error while executing web part: Microsoft.SharePoint.Search.WebControls.Srhdc GenericException: Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information.
---> System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() --- End of inner exception stack trace --- at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.get_ResultsReturned() at Microsoft.SharePoint.Search.Internal.WebControls.CoreRes...
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08* w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1 High ...ultsWebPart.ModifyXsltArgumentList(ArgumentClassWrapper argList) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean
bDeferExecuteTransform) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a2
High InnerException 1: System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart ()). Execution Time=15302.2074034549 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.09 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=15358.1002613461 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png))
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png) f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af71 Medium HTTP Request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af75 Medium Overridden HTTP request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af74 Medium HTTP request URL: /tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.60 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png)). Execution Time=9.75459171486879 f0d03f8e-d78b-4004-9a5f-3ee9955afa60
Not sure what "resource limit is reached" actually means. This SharePoint installation is running under regular SQL 2008 R2, and the
WSS_Content database is fairly small (10gig). I've reviewed the Search Service, the process account running it, the
WSS_SEARCH index database, and verified that the Content database is using the proper index database. Everything looks like it should be crawling/indexing/working fine. But the WSS_SEARCH
database isn't very large, so I'm not sure if the crawling is actually filling it with anything.
Not sure where to start seriously troubleshooting this. Any advice would be appreciated. Thanks.

Hi,
The query ran in tens of seconds. This indicates that at some point a bad plan compiled and stayed in the cache.
It may have gotten there because the statistics were out of date.
A possible way to keep this from happening is to rebuild statistics with full scan more frequently.
Try free the proc cache and see the result.
http://msdn.microsoft.com/en-us/library/ms174283(v=SQL.105).aspx
Thanks,
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

Im trying to buy i movie but when ever i try too it says my purchase cannot be completed my credit card is good and i have enough storage so i dont know what else to do

I tryed to download i movie but whenever i try to it says my purchase cannot be completed my credit card is correct ive double checked and i jave enough storage for it so can someone please help me

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Problem installing Skype- This operation cannot be completed...

I'm pretty new to all this mac stuff.
I downloaded skype, I extracted the dmg file and the skype icon attached onto the desktop, however when I try to copy this into the applications folder I get the following error:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
The weird thing is that i've had skype working but can't find anywhere to open it?
I've tried repairing permissions.
Help?

Once a .dmg (disc image) mounts on your Desktop you then need to run the Installer that's on it, or drag the application on it into your /Applications folder.
The icon in the Dock is just an alias (pointer) to the main application and should launch it with a single click.
When installing new applications you need to be logged in with root/owner permissions to write to some folders.
Skype should be sitting in your Applications folder if correctly installed ?

Exchange 2013 in Mac Environment - iPhones recieves email, Mac Outlook does not, OWA Error: Your request cannot be completed right now. Please try again later.

We are having some problems in Exchange when customers send us emails with large attachments. It doesn't happen all the time which is weird.
The emails show up fine on iPhones although it is very slow to show the whole email and attachment.
In OWA it gives an error - Error: Your request cannot be completed right now. Please try again later.
The emails never make it to our computer email program, Mac Outlook 2011

Hi,
What’s your Exchange 2013 version?
According to your description, I understand that the message which is sent from external customers with large attachments can’t be opened in OWA and Outlook for Mac for Exchange users. Is it rights?
If that is the case, please confirm if the issue only happens with the large attachment messages. Please confirm if the message with no attachment sent from the same customer can be received and shown correctly in OWA.
Please recycle the application pools in IIS Manager to have a try. If it doesn’t work, please change the OWA to use Conversation view then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Cannot store complete internal data error

Hello Diadem gurus,
I have some tdms files that I am post processing. I use diadem for that purpose. Some files cause the error "cannot store complete internal data error in the file."
See the attached picture. I assume it may be caused by my page file or a setting within Diadem. Any suggestions on how to prevent this?
Nasty detail is that the source files were actually lost! (I am saving changes made with diadem back into the same file, but in reality it simply overwrites the file.)
Attachments:
diadem error.JPG ‏17 KB

Hi aartjan,
There were a number of improvements made to the TDMS DataPlugin, which debuted with DIAdem 10.1. These improvements are available for download at www.ni.com/dataplugins for DIAdem 10.1 users. However, there was one fix made that was too extensive to backport to the DIAdem 10.1 codebase, and this I believe is the one you need. This last fix regarded the saving of enormous TDMS files. The TDMS DataPlugin which shipped with DIAdem 10.1 expected to fit all the data values into memory at one time. The TDMS DataPlugin which ships with DIAdem 10.2 Beta3 is able to buffer the data values to disk, therefore not requiring the entire file to fit in memory in order to succeed in exporting it to TDMS file.
The good news is that if you install DIAdem 10.2 Beta3 you will get the DIAdem 10.2 USI layer along with the correct TDMS DataPlugin. Then even if you uninstall DIAdem 10.2 Beta3, the newer USI and TDMS DataPlugin will remain and work correctly with your DIAdem 10.1. You can get the DIAdem 10.2 Beta3 by visiting the www.ni.com/beta website and requesting to participate in the DIAdem 10.2 Beta program. Once you have requested this, remind me to activate your Beta profile, after which you will be able to download the installer.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

This payment cannot be completed and your account has not been charged.

I Have been tryin to purchase a nintendo gift card off ebay for my little brother but it seems like every time i try to purchase it "This payment cannot be completed and your account has not been charged. Please contact your merchant for more information." comes up, i made sure that all my information is correct, this is my first tim buying something and i really have no idea whats causing this, i am able to receive funds from people but i am not allowed to pay for something. thank you.

Do you have a backup card linked to your PayPal account as well? Only normally you can't use funds in your balance without one linked.

A volume failed to mount/Operation cannot be completed

We bought a MacBook on the weekend. Our Apple concierge insisted that we can keep our music, videos and photos on our Windows XP desktop and "share" the files on the Mac--in other words, we can pull down what we need to edit or save on the Mac as need be.
We've set up the shared directories on the Windows machine, renamed the Workgroup to match the Mac and disabled the firewall. We've "connected to server" using Finder and can see the two shared directories we've set up.
But when I click on either one of them, I get an error message: "A volume failed to mount. The volume "Mac" could not be mounted."
After some time of being on the network, I see a Shared directory in Finder with my PC. If I click on the icon, the title bar says: "Connected as: Guest". The window displays the same two directories as above but when I click on one or the other I get an error message: "The operation cannot be completed because the original item for "Mac" cannot be found."
I've called Apple technical support and the agent's response was: I don't think you can do that. Just copy your files to the Mac using DVDs.
Any ideas? We don't want to have to transfer a lifetime of photos, video and music to our laptop--we want to use the XP desktop as our hub.

I'm having the same trouble. From an Intel Mac Mini running 10.5.3 I've been able to access smb shares fine on an old PC running XP pro. These are shared volumes on external drives on the PC. I can still access them fine from an old PowerBook G4 running 10.5.3, but while I can see computers on the network, if I try to connect to a share on the computer I get the message "the operation cannot be completed because the original item for <share name> cannot be found". If I try to mount it via a shortcut, I get the message "A volume failed to mount. The volume <share name> could not be mounted.
In the console, I'm seeing things like:
6/2/08 10:45:01 PM com.apple.coreservicesd[58] NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
but I don't know if that has anything to do with this or not.
Has anyone heard of a fix for this?
Thanks,
Mark

Your search cannot be completed because no search service is available- SP2013

Hi,
We have an application page, in which we need to retrieve the search results in SP2013. However, the query always returns the error "your search cannot be completed because no search service is available". Please find the code below.
using (SPSite site = new SPSite("http://server"))
using (SPWeb web = site.OpenWeb())
Microsoft.SharePoint.Search.Query.FullTextSqlQuery kq = new FullTextSqlQuery(site);
// KeywordQuery kq = new KeywordQuery(site);
//KeywordQuery kq = new KeywordQuery(site);
kq.SourceId = new Guid(SourceID_Value);
kq.QueryText = keyword;
kq.RowLimit = 100;
kq.AuthenticationType = QueryAuthenticationType.NtAuthenticatedQuery;
ResultTableCollection resultTables = new SearchExecutor().ExecuteQuery(kq);
ResultTable resultTableFinal = new ResultTable();
resultTableFinal = resultTables[ResultType.RelevantResults];
However, the same code works in a console application executed on the same server. Please let know if you have faced this issue and the solution.
Sreeharsha Alagani | MCTS Sharepoint 2010 |
Linkedin | Blog

Not sure if it's typo with your post or the code, the url in the first line doesn't contain a close quote.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Error message during copy of new version, it says the operation cannot be completed because the item foxfire is in use.

During downloading of 7.0 Foxfire, during the copy I get an error message that says the operation cannot be completed because the item Foxfire is in use.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

The operation cannot be completed because it is in use

i have a macbook with yosemite running.I also have a wdtv live with a 1tb hdd on it.I could transfer files from my mac to the hdd over wifi with no problem till i upgraded to yosemite.It tells me when i transfer a large file the operation cannot be completed because it is in use.Small files can be transferred with no problem at all.When i transfer them through direct usb to the hdd no problem at all.What can be the solution to this problem???

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Translation / consolidation cannot be completely correct conducted

Similar Messages

Maybe you are looking for