Translation Management Tool FWM 01014

We are currently using SAP BusinessObjects BI Platform 4.1 SP5.
The Translation Management Tool is currently giving us the following error when attempting to import a folder from the System Repository:
org.apache.axis2.AxisFault: Unable to find servers in CMS <[email protected]>:6400 ... All such servers could be down or disabled by the administrator (FWM 01014).
As mentioned in the SAP Knowledge Base Article 1974085 the two listed causes are:
1. There is no available Translation Manager Service in one of the Adaptive Processing Servers
2. Request Port for the CMS is not opened in the users firewall
When viewing the services in the APS on the CMC it does show a Translation Service but there are no configuration options for it. As well, there is currently no firewall set up either on the server or the client machine.
Does anyone know a solution?
Thanks.

Hi,
1)Ping the Server machine with IP address and host name from the client machine. Ping the client machine with IP address and host name from the server machine.
2)If you are facing any issue then try making the host file entry on the server machine and client machine as below
<IP Address> <Hostname> <FQDN> (OF Server)
<IP Address> <Hostname> <FQDN> (OF Client)
Both the above entries to be made on the Server and client machine.
Regards,
~Shree

Similar Messages

Translation Management Tool (BI 4.0) fails to import Crystal Reports

I am trying to use the Translation Management Tool on Crystal Reports in our CMS Repository. When I try to import the reports the Import Status indicates a Fail but does not give an error message. When I click on the failed item the tool displays com.businessobjects.sdk.oca2.translation.internal.TranslationServiceException in red in the bottom of the window.
Can anyone help with why I cannot import these reports?
-Byron Clairoux
Treasury Board Secretariat

It is good to have what I suspected was happening confirmed, and that it is at least noted in the documentation. A less cryptic error message would be helpful - something clearer than the current "com.businessobjects.sdk.oca2.translation.internal.TranslationServiceException" message that is displayed if you try and import a CR 2011/2013 report.
Thanks for the responses
-Byron

SAP BO Translation Management Tool

Hi,
I am using the SAP BO Translation Management Tool to translate our WEBI reports into French language. Most of the queries are getting translated properly and after the export to the server they are available in French language.
But I am having issues with two of those reports in which even on successfully translating the variables and exporting the same to the server the translation is not available. On opening the WEBI report again in TMT it shows that none of the variables were translated and this problem is only with the variables not with query names or prompts.
Any kind of help would be great.
Regards,
Arminder Singh

Hi,
Follow this
1888952 - Translations not retained for user variables when translating to multiple languages in Translation Management Tool.

[BO 4.0 Client Tools] Problems with using Translation Manager

I have Installed SAP BO 4.0 with SP 2 on a Windows 2008 R2 Server with a MS SQL Server 2008 R2 as repository Server.
I have patched the Server with the SP4 for BO. I have installed the Client tools with the same Patchlevel (SP 4) on the same Server.
The Java - Installation is the Installation from SAP BO 4.0
Now I try to use the "Translation Management Tool"
Login with a BO - Administrator and Enterprise authentification.
Next Step ist to load an object from the repository.
This ends with an error Message: java.lang.Exception: initInstance failed. -2
And now? I have no idea.
Who can Help?
Ralph

Hello Mister Makmerphy,
it seems, that the higher memory limit solved the problem.
I made it in some steps and now I have a memory limit with 3 Gbyte.
And with a last step I've added the last 4 parameters.
But now I have the Problem:
"This server is considered failed because it has stopped 5 time(s) in 60 minute(s)."
And the actuall status is "failed"
Where can I reset this counter.
Waiting another hour to restart doesn't help
System Reboot doesn't help.
Where can I reset this counter or this timer.
Ralph

Impliment SAP Authentication for Translation manager BI 4.0

Hello Experts,
We are using SAP Authentication type to logon and to create the reports.The reports are created now.We would need to have these reports translated using Translation Manager (TM) but they have provided a user name on Enterprise login.
But when we try to import the reports it is getting failed and giving an error "InitInitilization Java" exception .
As when the clinet tool TM is opened it is not showing the SAP authentication it has (Enterprise,Windows AD,LDAP,Standalone) and no SAP.
So can you suggest about how to have the SAP login for TM also.We are using BI 4.0 SP 2.7.Reports are created using BEX as back end.
thanks in advance
Lekshmi

Hi Lekshmi,
In your Translation Manager web.xml look for Authentication.default and set sso.sap.primary and set the values as
<context-param>
<param-name>authentication.default</param-name>
<param-value>secSAPR3</param-value>
</context-param>
<context-param>
<param-name>sso.sap.primary</param-name>
<param-value>true</param-value>
</context-param>
Thanks,
Sravanthi

BPC Mass User Management Tool error in BPC 10

Hello,
I've downloaded tranport files from How to use BPC Mass User Management Tool in Netweaver. But Transport import fails with RC12 without any shortdump. ABAP program ZUJE_MASS_USER_MGMT is not created.
Version used - BPC 10 CPMBPC 801 on Netweaver 7.4 .
Thanks in advance for your inputs.

Tried changing transport options but no luck. Transport failed with status RC12 without creating ABAP program. However, Old version transport files imported with error. But I could not find METHOD check_bpc_component_is_valid.
Can anyone please send the updated program.
*& Report ZUJE_MASS_USER_MGMT
*& Created By: Rich Heilman SAP Labs, LLC
*& Created On: 08/2/2010
REPORT zuje_mass_user_mgmt.
TYPE-POOLS: abap, vrm.
*       CLASS lcl_application DEFINITION
CLASS lcl_application DEFINITION FINAL.
PUBLIC SECTION.
    CONSTANTS: lc_comma TYPE char01 VALUE ',',
               lc_pipe TYPE char01 VALUE '|',
               lc_tab TYPE char10 VALUE 'TAB'.
    TYPES: BEGIN OF t_appldim,
            appl_id TYPE uj_appl_id,
            dimension TYPE uj_dim_name,
          END OF t_appldim.
    TYPES: BEGIN OF t_appldimmembers,
            appl_id TYPE uj_appl_id,
            dimension TYPE uj_dim_name,
            member TYPE uj_dim_member,
          END OF t_appldimmembers.
    CLASS-METHODS: file_f4 RETURNING value(r_file) TYPE string,
                   directory_f4 RETURNING value(r_path) TYPE string,
                   get_initial_directory RETURNING value(r_path) TYPE string,
                   set_delimiter_listbox,
                   set_delimiter,
                   export_users_to_file,
                   import_users_from_file,
                   export_teams_to_file,
                   import_teams_from_file,
                   export_team_assign_to_file,
                   import_team_assign_from_file,
                   export_task_profiles_to_file,
                   import_task_profiles_from_file,
                   export_mem_profiles_to_file,
                   import_mem_profiles_from_file,
                   export_tap_assign_to_file,
                   import_tap_assign_from_file,
                   export_map_assign_to_file,
                   import_map_assign_from_file,
                   get_appset_data IMPORTING i_appset_id TYPE uj_appset_id
                                   EXCEPTIONS appset_not_found .
PRIVATE SECTION.
    CLASS-DATA: lv_appset_id TYPE uja_s_appset_info-appset_id.
    CLASS-DATA: lv_delimiter TYPE string.
    CLASS-DATA: ls_appset_info TYPE uja_s_appset_info.
    CLASS-DATA: lt_appl_info TYPE uja_t_appl_info.
    CLASS-DATA: lt_appl_dim TYPE TABLE OF t_appldim.
    CLASS-DATA: lt_members TYPE TABLE OF t_appldimmembers.
    CLASS-DATA: lt_teams_list TYPE uje_t_team.
    CLASS-DATA: lt_users_list TYPE uje_t_user.
    CLASS-DATA: lt_tprofs TYPE uje_t_api_profile_id.
    CLASS-DATA: lt_mprofs TYPE uje_t_api_profile_id.
    CLASS-DATA: lt_tasks TYPE uje_t_role_tskasg.
    CLASS-DATA: lt_roles TYPE uje_t_role.
    CLASS-DATA: lo_context TYPE REF TO if_uj_context.
    CLASS-DATA: lt_alv_messages TYPE uj0_t_message.
    CLASS-METHODS: set_global_context,
                   render_alv,
                   upload IMPORTING i_filepath TYPE any
                          RETURNING value(rt_strtab) TYPE stringtab,
                   download IMPORTING i_filepath TYPE any
                                     it_datatab TYPE STANDARD TABLE,
                   user_is_valid IMPORTING i_user_id TYPE any
                                 RETURNING value(r_boolean) TYPE abap_bool,
                   team_is_valid IMPORTING i_team_id TYPE any
                                 RETURNING value(r_boolean) TYPE abap_bool,
                   tprofile_is_valid IMPORTING i_profile_id TYPE any
                                     RETURNING value(r_boolean) TYPE abap_bool,
                   mprofile_is_valid IMPORTING i_profile_id TYPE any
                                     RETURNING value(r_boolean) TYPE abap_bool,
                   role_is_valid IMPORTING i_role_id TYPE any
                                 RETURNING value(r_boolean) TYPE abap_bool,
                   task_is_valid IMPORTING i_task_id TYPE any
                                 RETURNING value(r_boolean) TYPE abap_bool.
ENDCLASS.                    "lcl_application DEFINITION
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_export RADIOBUTTON GROUP grp1 DEFAULT 'X' USER-COMMAND chk.
PARAMETERS: p_import RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_appset TYPE uja_appset_info-appset_id.
PARAMETERS: p_file TYPE string LOWER CASE.
PARAMETERS: p_delmt TYPE char10 AS LISTBOX VISIBLE LENGTH 20
                       DEFAULT lcl_application=>lc_comma. "delimiter
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_eusers RADIOBUTTON GROUP grp2 MODIF ID exp.
PARAMETERS: p_eteams RADIOBUTTON GROUP grp2 MODIF ID exp.
PARAMETERS: p_eteama RADIOBUTTON GROUP grp2 MODIF ID exp.
PARAMETERS: p_etprof RADIOBUTTON GROUP grp2 MODIF ID exp.
PARAMETERS: p_emprof RADIOBUTTON GROUP grp2 MODIF ID exp.
PARAMETERS: p_etprfa RADIOBUTTON GROUP grp2 MODIF ID exp.
PARAMETERS: p_emprfa RADIOBUTTON GROUP grp2 MODIF ID exp.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-004.
PARAMETERS: p_iusers RADIOBUTTON GROUP grp3 MODIF ID imp.
PARAMETERS: p_iteams RADIOBUTTON GROUP grp3 MODIF ID imp.
PARAMETERS: p_iteama RADIOBUTTON GROUP grp3 MODIF ID imp.
PARAMETERS: p_itprof RADIOBUTTON GROUP grp3 MODIF ID imp.
PARAMETERS: p_improf RADIOBUTTON GROUP grp3 MODIF ID imp.
PARAMETERS: p_itprfa RADIOBUTTON GROUP grp3 MODIF ID imp.
PARAMETERS: p_imprfa RADIOBUTTON GROUP grp3 MODIF ID imp.
SELECTION-SCREEN END OF BLOCK b4.
INITIALIZATION.
p_file = lcl_application=>get_initial_directory( ).
lcl_application=>set_delimiter_listbox( ).
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_export = abap_true AND screen-group1 = 'IMP'.
      screen-active = '0'.
    ENDIF.
    IF p_import = abap_true AND screen-group1 = 'EXP'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN.
CASE abap_true.
    WHEN p_export.
      CLEAR: p_iusers, p_iteams, p_iteama, p_itprof,
             p_improf, p_itprfa, p_imprfa.
    WHEN p_import.
      CLEAR: p_eusers, p_eteams, p_eteama, p_etprof,
             p_emprof, p_etprfa, p_emprfa.
ENDCASE.
IF sy-ucomm <> 'CHK'.
    IF p_appset IS INITIAL.
      MESSAGE e001(00) WITH 'Please enter an AppSet Id'.
    ENDIF.
    IF p_file IS INITIAL.
      MESSAGE e001(00) WITH 'Please enter a valid directory or file'.
    ENDIF.
    IF p_delmt IS INITIAL.
      MESSAGE e001(00) WITH 'Please specify a delimiter'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CASE abap_true.
    WHEN p_export. p_file = lcl_application=>directory_f4( ).
    WHEN p_import. p_file = lcl_application=>file_f4( ).
ENDCASE.
START-OF-SELECTION.
lcl_application=>set_delimiter( ).
lcl_application=>get_appset_data(
              EXPORTING
                   i_appset_id = p_appset
              EXCEPTIONS
                   appset_not_found = 1 ).
IF sy-subrc <> 0.
    RETURN.
ENDIF.
CASE abap_true.
    WHEN p_eusers. lcl_application=>export_users_to_file( ).
    WHEN p_iusers. lcl_application=>import_users_from_file( ).
    WHEN p_eteams. lcl_application=>export_teams_to_file( ).
    WHEN p_iteams. lcl_application=>import_teams_from_file( ).
    WHEN p_eteama. lcl_application=>export_team_assign_to_file( ).
    WHEN p_iteama. lcl_application=>import_team_assign_from_file( ).
    WHEN p_etprof. lcl_application=>export_task_profiles_to_file( ).
    WHEN p_itprof. lcl_application=>import_task_profiles_from_file( ).
    WHEN p_emprof. lcl_application=>export_mem_profiles_to_file( ).
    WHEN p_improf. lcl_application=>import_mem_profiles_from_file( ).
    WHEN p_etprfa. lcl_application=>export_tap_assign_to_file( ).
    WHEN p_itprfa. lcl_application=>import_tap_assign_from_file( ).
    WHEN p_emprfa. lcl_application=>export_map_assign_to_file( ).
    WHEN p_imprfa. lcl_application=>import_map_assign_from_file( ).
ENDCASE.
*       CLASS lcl_application IMPLEMENTATION
CLASS lcl_application IMPLEMENTATION.
METHOD file_f4.
    DATA: lt_file_table TYPE filetable.
    DATA: ls_file_table LIKE LINE OF lt_file_table.
    DATA: lv_rc TYPE sy-subrc.
    cl_gui_frontend_services=>file_open_dialog(
      CHANGING
        file_table = lt_file_table
        rc         = lv_rc ).
    CLEAR ls_file_table .
    READ TABLE lt_file_table INTO ls_file_table INDEX 1.
    IF sy-subrc = 0.
      r_file = ls_file_table-filename.
    ENDIF.
ENDMETHOD.                                                "file_f4
METHOD directory_f4.
    cl_gui_frontend_services=>directory_browse(
        CHANGING
          selected_folder      = r_path
        EXCEPTIONS
          OTHERS               = 4 ).
ENDMETHOD.                    "directory_f4
METHOD upload.
    cl_gui_frontend_services=>gui_upload(
          EXPORTING
            filename = i_filepath
          CHANGING
            data_tab = rt_strtab
          EXCEPTIONS
            OTHERS   = 19 ).
    IF sy-subrc <> 0.
      MESSAGE e001(00) WITH 'File not found, check file path and name'.
    ENDIF.
    DELETE rt_strtab WHERE table_line IS INITIAL.
ENDMETHOD.                    "upload
METHOD download.
    DATA: lt_datatab TYPE stringtab.
    DATA: ls_datatab LIKE LINE OF lt_datatab.
    FIELD-SYMBOLS: <ls_data> TYPE ANY.
    FIELD-SYMBOLS: <lv_field> TYPE ANY.
* Convert table to delimited string table
    LOOP AT it_datatab ASSIGNING <ls_data>.
      CLEAR ls_datatab.
      DO.
        ASSIGN COMPONENT sy-index
                         OF STRUCTURE <ls_data> TO <lv_field>.
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
        IF ls_datatab IS INITIAL.
          ls_datatab = <lv_field>.
        ELSE.
          CONCATENATE ls_datatab <lv_field>
                          INTO ls_datatab SEPARATED BY lcl_application=>lv_delimiter.
        ENDIF.
      ENDDO.
      APPEND ls_datatab TO lt_datatab.
    ENDLOOP.
    cl_gui_frontend_services=>gui_download(
       EXPORTING
         filename = i_filepath
       CHANGING
         data_tab = lt_datatab
       EXCEPTIONS
         OTHERS   = 24 ).
    IF sy-subrc <> 0.
      MESSAGE e001(00)
          WITH 'File not downloaded, check file path and name'.
    ENDIF.
ENDMETHOD.                    "download
METHOD get_initial_directory.
    cl_gui_frontend_services=>get_desktop_directory(
      CHANGING
        desktop_directory    = r_path ).
    cl_gui_cfw=>flush( ).
    CONCATENATE r_path '\*.csv' INTO r_path.
ENDMETHOD.                    "get_initial_directory
METHOD export_users_to_file.
    TYPES: BEGIN OF t_output,
            user_id TYPE uje_user-user_id,
            fullname TYPE uje_user-fullname,
            email TYPE uje_user-email,
           END OF t_output.
    DATA: lt_user_id TYPE uje_t_api_user_id.
    DATA: lt_users TYPE uje_t_user.
    DATA: ls_users LIKE LINE OF lt_users.
    DATA: lt_output TYPE TABLE OF t_output.
    DATA: ls_output LIKE LINE OF lt_output.
    lcl_application=>set_global_context( ).
    CALL FUNCTION 'UJE_API_GET_LIST_USERS'
      EXPORTING
        i_appset_id = lcl_application=>lv_appset_id
        is_user     = lcl_application=>lo_context->ds_user
        it_user_id = lt_user_id
      IMPORTING
        et_user     = lt_users.
    REFRESH lt_output.
    LOOP AT lt_users INTO ls_users.
      MOVE-CORRESPONDING ls_users TO ls_output.
      APPEND ls_output TO lt_output.
    ENDLOOP.
* Download table
    lcl_application=>download( EXPORTING i_filepath = p_file
                                         it_datatab = lt_output ).
ENDMETHOD.                    "export_users_to_file
METHOD import_users_from_file.
    DATA: lv_action TYPE uj_action.
    DATA: lv_success TYPE uj_bool.
    DATA: ls_user_info TYPE uje_s_userinfo.
    DATA: lt_messages TYPE uj0_t_message.
    DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
    DATA: lt_team_asin TYPE uje_t_user_team.
    DATA: lt_tprofiles TYPE uje_t_profile_id_act.
    DATA: lt_mprofiles TYPE uje_t_profile_id_act.
    DATA: lt_strtab TYPE stringtab.
    DATA: ls_strtab LIKE LINE OF lt_strtab.
    lt_strtab = lcl_application=>upload( p_file ).
    LOOP AT lt_strtab INTO ls_strtab.
      SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_user_info-user_id
                                  ls_user_info-fullname
                                  ls_user_info-email.
* Check if user already exists, and set action accordingly.
      IF lcl_application=>user_is_valid( ls_user_info-user_id ) = abap_false.
        lv_action = 'I'.
      ELSE.
        lv_action = 'M'.
      ENDIF.
      CALL FUNCTION 'UJE_API_MANAGE_USER2'
        EXPORTING
          i_appset_id      = lcl_application=>lv_appset_id
          is_user          = lcl_application=>lo_context->ds_user
          is_user_info     = ls_user_info
          i_action         = lv_action
          it_team_asin     = lt_team_asin
          it_tprofile_id   = lt_tprofiles
          it_mprofile_id   = lt_mprofiles
        IMPORTING
          e_success        = lv_success
          et_message_lines = lt_messages.
      IF lv_success = 'Y'.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'S'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'User ID' ls_user_info-user_id
                    'has been created/updated successfully'
                            INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
      ELSE.
        APPEND LINES OF lt_messages TO lt_alv_messages.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'E'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'User ID' ls_user_info-user_id
                    'not created/updated due to error'
                             INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
      ENDIF.
    ENDLOOP.
    lcl_application=>render_alv( ).
ENDMETHOD.                    "create_users_from_file
METHOD export_teams_to_file.
    TYPES: BEGIN OF t_output,
            team_id TYPE uje_s_team-team_id,
            description TYPE uje_s_team-description,
           END OF t_output.
    DATA: lt_teams TYPE uje_t_team.
    DATA: ls_teams LIKE LINE OF lt_teams.
    DATA: lt_output TYPE TABLE OF t_output.
    DATA: ls_output LIKE LINE OF lt_output.
    CALL FUNCTION 'UJE_API_GET_TEAMS'
      EXPORTING
        i_appset_id = lcl_application=>lv_appset_id
        is_user     = lcl_application=>lo_context->ds_user
      IMPORTING
        et_team     = lt_teams.
    REFRESH lt_output.
    LOOP AT lt_teams INTO ls_teams.
      MOVE-CORRESPONDING ls_teams TO ls_output.
      APPEND ls_output TO lt_output.
    ENDLOOP.
* Download table
    lcl_application=>download( EXPORTING i_filepath = p_file
                                         it_datatab = lt_output ).
ENDMETHOD.                    "export_teams_to_file
METHOD import_teams_from_file.
    DATA: lv_action TYPE uj_action.
    DATA: lv_success TYPE uj_bool.
    DATA: ls_team TYPE uje_s_team.
    DATA: lt_messages TYPE uj0_t_message.
    DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
    DATA: lt_users TYPE uje_t_user_team.
    DATA: lt_tprofiles TYPE uje_t_profile_id_act.
    DATA: lt_mprofiles TYPE uje_t_profile_id_act.
    DATA: lt_strtab TYPE stringtab.
    DATA: ls_strtab LIKE LINE OF lt_strtab.
    lt_strtab = lcl_application=>upload( p_file ).
    LOOP AT lt_strtab INTO ls_strtab.
      SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_team-team_id
                                  ls_team-description.
* Check if team is already a valid team, set action appropriatly
      IF lcl_application=>team_is_valid( ls_team-team_id ) = abap_false.
        lv_action = 'I'.
      ELSE.
        lv_action = 'M'.
      ENDIF.
      CALL FUNCTION 'UJE_API_MANAGE_TEAM2'
        EXPORTING
          i_appset_id      = lcl_application=>lv_appset_id
          is_user          = lcl_application=>lo_context->ds_user
          is_team          = ls_team
          i_action         = lv_action
          it_users         = lt_users
          it_tprofile_id   = lt_tprofiles
          it_mprofile_id   = lt_mprofiles
        IMPORTING
          e_success        = lv_success
          et_message_lines = lt_messages.
      IF lv_success = 'Y'.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'S'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'Team' ls_team-team_id
                     'has been created/updated successfully'
                         INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
      ELSE.
        APPEND LINES OF lt_messages TO lt_alv_messages.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'E'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'Team' ls_team-team_id
                    'not created/updated due to error'
                          INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
      ENDIF.
    ENDLOOP.
    lcl_application=>render_alv( ).
ENDMETHOD.                    "create_teams_from_file
METHOD export_team_assign_to_file.
    TYPES: BEGIN OF t_user_assign,
            user_id TYPE uje_s_user_team-user_id,
            team_id TYPE uje_s_user_team-team_id,
            teamleader TYPE uje_s_user_team-teamleader,
           END OF t_user_assign.
    DATA: lt_user_det TYPE uje_t_user_detail.
    DATA: ls_user_det LIKE LINE OF lt_user_det.
    DATA: ls_user_team TYPE uje_s_user_team.
    DATA: lt_team_assign TYPE TABLE OF t_user_assign.
    DATA: ls_team_assign LIKE LINE OF lt_team_assign.
    CALL FUNCTION 'UJE_API_GET_USERDATA'
      EXPORTING
        i_appset_id = lcl_application=>lv_appset_id
        is_user     = lcl_application=>lo_context->ds_user
      IMPORTING
        et_user     = lt_user_det.
    LOOP AT lt_user_det INTO ls_user_det.
      LOOP AT ls_user_det-t_team_id INTO ls_user_team.
        MOVE-CORRESPONDING ls_user_team TO ls_team_assign.
        APPEND ls_team_assign TO lt_team_assign.
      ENDLOOP.
    ENDLOOP.
* Download table
    lcl_application=>download( EXPORTING i_filepath = p_file
                                         it_datatab = lt_team_assign ).
ENDMETHOD.                    "export_team_assign_to_file
METHOD import_team_assign_from_file.
    TYPES: BEGIN OF t_user_assign,
            user_id TYPE uje_s_user_team-user_id,
            team_id TYPE uje_s_user_team-team_id,
            teamleader TYPE uje_s_user_team-teamleader,
           END OF t_user_assign.
    DATA: lv_success TYPE uj_bool.
    DATA: lt_user_team_temp TYPE uje_t_user_team.
    DATA: ls_user_team_temp TYPE uje_s_user_team.
    DATA: lt_user_team TYPE uje_t_user_team.
    DATA: ls_user_team TYPE uje_s_user_team.
    DATA: ls_team_assign TYPE uje_s_user_team.
    DATA: lt_messages TYPE uj0_t_message.
    DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
    DATA: lt_tprofiles TYPE uje_t_profile_id_act.
    DATA: ls_tprofiles LIKE LINE OF lt_tprofiles.
    DATA: lt_mprofiles TYPE uje_t_profile_id_act.
    DATA: ls_mprofiles LIKE LINE OF lt_mprofiles.
    DATA: lt_tprofile_ids TYPE uje_t_api_profile_id.
    DATA: ls_tprofile_ids LIKE LINE OF lt_tprofile_ids.
    DATA: lt_mprofile_ids TYPE uje_t_api_profile_id.
    DATA: ls_mprofile_ids LIKE LINE OF lt_mprofile_ids.
    DATA: lt_strtab TYPE stringtab.
    DATA: ls_strtab LIKE LINE OF lt_strtab.
    DATA: ls_teams_list LIKE LINE OF lt_teams_list.
    lt_strtab = lcl_application=>upload( p_file ).
    LOOP AT lt_strtab INTO ls_strtab.
      SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_team_assign-user_id
                                  ls_team_assign-team_id
                                  ls_team_assign-teamleader.
      CLEAR ls_user_team.
      ls_user_team-user_id = ls_team_assign-user_id.
      ls_user_team-team_id = ls_team_assign-team_id.
      ls_user_team-teamleader = ls_team_assign-teamleader.
      TRANSLATE ls_user_team-teamleader USING 'YXyX1XxXN n 0 '. "Translate to X or space
      APPEND ls_user_team TO lt_user_team.
      IF lcl_application=>team_is_valid( ls_team_assign-team_id ) = abap_false.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'E'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'Team' ls_team_assign-team_id 'does not yet exist.'
                    'No user assigments done.'
                          INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
        lcl_application=>render_alv( ).
        RETURN.
      ENDIF.
      IF lcl_application=>user_is_valid( ls_team_assign-user_id ) = abap_false.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'E'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'User' ls_team_assign-user_id 'does not yet exist.'
                    'No user assigments done.'
                          INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
        lcl_application=>render_alv( ).
        RETURN.
      ENDIF.
    ENDLOOP.
    LOOP AT lcl_application=>lt_teams_list INTO ls_teams_list.
      REFRESH lt_user_team_temp.
      REFRESH lt_tprofile_ids.
      REFRESH lt_mprofile_ids.
* Check that there is data for team assignment, otherwise skip
      READ TABLE lt_user_team TRANSPORTING NO FIELDS
                        WITH KEY team_id = ls_teams_list-team_id.
      IF sy-subrc <> 0.
        CONTINUE.
      ENDIF.
* Get existing team data for this team.
      CALL FUNCTION 'UJE_API_GET_TEAMDATA'
        EXPORTING
          i_appset_id    = lcl_application=>lv_appset_id
          is_user        = lcl_application=>lo_context->ds_user
          i_team_id      = ls_teams_list-team_id
        IMPORTING
          et_user_team   = lt_user_team_temp
          et_tprofile_id = lt_tprofile_ids
          et_mprofile_id = lt_mprofile_ids.
* Update with new users.
      LOOP AT lt_user_team INTO ls_user_team
                       WHERE team_id = ls_teams_list-team_id.
        MOVE-CORRESPONDING ls_user_team TO ls_user_team_temp.
        APPEND ls_user_team_temp TO lt_user_team_temp.
      ENDLOOP.
* Keep existing profiles.
      REFRESH lt_tprofiles.
      LOOP AT lt_tprofile_ids INTO ls_tprofile_ids.
        ls_tprofiles-profile_id = ls_tprofile_ids-profile_id.
        APPEND ls_tprofiles TO lt_tprofiles.
      ENDLOOP.
      REFRESH lt_mprofiles.
      LOOP AT lt_mprofile_ids INTO ls_mprofile_ids.
        ls_mprofiles-profile_id = ls_mprofile_ids-profile_id.
        APPEND ls_mprofiles TO lt_mprofiles.
      ENDLOOP.
* now update the user/team assignments
      CALL FUNCTION 'UJE_API_MANAGE_TEAM2'
        EXPORTING
          i_appset_id      = lcl_application=>lv_appset_id
          is_user          = lcl_application=>lo_context->ds_user
          is_team          = ls_teams_list
          i_action         = 'M'
          it_users         = lt_user_team_temp
          it_tprofile_id   = lt_tprofiles
          it_mprofile_id   = lt_mprofiles
        IMPORTING
          e_success        = lv_success
          et_message_lines = lt_messages.
      IF lv_success = 'Y'.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'S'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'Team' ls_teams_list-team_id 'user assignments'
                    'have been updated successfully'
                         INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
      ELSE.
        APPEND LINES OF lt_messages TO lt_alv_messages.
        CLEAR ls_alv_messages.
        ls_alv_messages-msgid = '00'.
        ls_alv_messages-msgty = 'E'.
        ls_alv_messages-msgno = '001'.
        CONCATENATE 'Team' ls_teams_list-team_id 'user assignments'
                    'not updated due to error'
                         INTO ls_alv_messages-message SEPARATED BY space.
        APPEND ls_alv_messages TO lt_alv_messages.
      ENDIF.
    ENDLOOP.
    lcl_application=>render_alv( ).
ENDMETHOD.                    "import_team_assign_from_file
METHOD export_task_profiles_to_file.
    TYPES: BEGIN OF t_output,
            identifier TYPE char01, " Row Identifer
            profile TYPE uj_profile_id,
            values TYPE string,
           END OF t_output.
    DATA: ls_tprofs LIKE LINE OF lt_tprofs.
    DATA: lv_profile TYPE uj_profile_id.
    DATA: ls_profile TYPE uje_s_profile.
    DATA: lt_role_id TYPE uje_t_api_role_id.
    DATA: ls_role_id LIKE LINE OF lt_role_id.
    DATA: lt_task_info TYPE uje_t_task_info.
    DATA: ls_task_info LIKE LINE OF lt_task_info.
    DATA: lt_users_asin TYPE uje_t_api_user_id.
    DATA: ls_users_asin LIKE LINE OF lt_users_asin.
    DATA: lt_teams_asin TYPE uje_t_api_team_id.
    DATA: ls_teams_asin LIKE LINE OF lt_teams_asin.
    DATA: lt_output TYPE TABLE OF t_output.
    DATA: ls_output LIKE LINE OF lt_output.
    LOOP AT lcl_application=>lt_tprofs INTO ls_tprofs.
      lv_profile = ls_tprofs-profile_id.
* Get relevant data for task profile
      CLEAR ls_profile.
      REFRESH: lt_role_id, lt_task_info, lt_users_asin, lt_teams_asin.
      CALL FUNCTION 'UJE_API_GET_TPROFILEDATA2'
        EXPORTING
          i_appset_id = lcl_application=>lv_appset_id
          is_user      = lcl_application=>lo_context->ds_user
          i_profile_id = lv_profile
        IMPORTING
          es_profile   = ls_profile
          et_role_id   = lt_role_id
          et_task_info = lt_task_info
          et_user_id   = lt_users_asin
          et_team_id   = lt_teams_asin.
* Write Header row
      CLEAR ls_output.
      ls_output-identifier = 'H'.
      ls_output-profile = lv_profile.
      ls_output-values = ls_profile-description.
      APPEND ls_output TO lt_output.
* Write task assigments
      CLEAR ls_output.
      ls_output-identifier = 'K'.
      ls_output-profile = lv_profile.
      LOOP AT lt_task_info INTO ls_task_info.
        ls_output-values = ls_task_info-task_id.
        APPEND ls_output TO lt_output.
      ENDLOOP.
* Write role assigments
      CLEAR ls_output.
      ls_output-identifier = 'R'.
      ls_output-profile = lv_profile.
      LOOP AT lt_role_id INTO ls_role_id.
        ls_output-values = ls_role_id-role_id.
        APPEND ls_output TO lt_output.
      ENDLOOP.
* Write user assignments
      CLEAR ls_output.
      ls_output-identifier = 'U'.
      ls_output-profile = lv_profile.
      LOOP AT lt_users_asin INTO ls_users_asin.
        ls_output-values = ls_users_asin-user_id.
        APPEND ls_output TO lt_output.
      ENDLOOP.
* Write team assignments
      CLEAR ls_output.
      ls_output-identifier = 'T'.
      ls_output-profile = lv_profile.
      LOOP AT lt_teams_asin INTO ls_teams_asin.
        ls_output-values = ls_teams_asin-team_id.
        APPEND ls_output TO lt_output.
      ENDLOOP.
    ENDLOOP.
* Download table
    lcl_application=>download( EXPORTING i_filepath = p_file
                                         it_datatab = lt_output ).
ENDMETHOD.                    "export_task_profiles_to_file
METHOD import_task_profiles_from_file.
    TYPES: BEGIN OF t_input,
            identifier TYPE char01, " Row Identifer
            profile TYPE uj_profile_id,
            values TYPE string,
           END OF t_input.
    TYPES: BEGIN OF t_task_profile,
            profile TYPE uje_s_profile,
            roles TYPE uje_t_api_role_id,
            task_info TYPE uje_t_task_info,
            users_asin TYPE uje_t_api_user_id,
            teams_asin TYPE uje_t_api_team_id,
           END OF t_task_profile.
    DATA: lt_task_profile TYPE TABLE OF t_task_profile.
    DATA: ls_task_profile LIKE LINE OF lt_task_profile.
    DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
    DATA: lt_messages TYPE uj0_t_message.
    DATA: lv_action TYPE uj_action.
    DATA: lv_success TYPE uj_bool.
    DATA: lv_last_profile TYPE uj_profile_id.
    DATA: lt_role_id TYPE uje_t_api_role_id.
    DATA: ls_role_id LIKE LINE OF lt_role_id.
    DATA: lt_task_info TYPE uje_t_task_info.
    DATA: ls_task_info LIKE LINE OF lt_task_info.
    DATA: lt_users_asin TYPE uje_t_api_user_id.
    DATA: ls_users_asin LIKE LINE OF lt_users_asin.
    DATA: lt_teams_asin TYPE uje_t_api_team_id.
    DATA: ls_teams_asin LIKE LINE OF lt_teams_asin.
    DATA: lt_strtab TYPE stringtab.
    DATA: ls_strtab LIKE LINE OF lt_strtab.
    DATA: lt_input TYPE TABLE OF t_input.
    DATA: ls_input LIKE LINE OF lt_input.
    DATA: lt_obj_asin TYPE uje_t_profile_asin.
    DATA: ls_obj_asin LIKE LINE OF lt_obj_asin.
    DATA: lt_task_asin TYPE uje_t_task_id_act.
    DATA: ls_task_asin LIKE LINE OF lt_task_asin.
* Upload file
    lt_strtab = lcl_application=>upload( p_file ).
* Rip import file into internal table
    LOOP AT lt_strtab INTO ls_strtab.
      CLEAR ls_input.
      SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_input-identifier
                                  ls_input-profile
                                  ls_input-values.
      APPEND ls_input TO lt_input.
    ENDLOOP.
* Build profile table containing all associated data
    SORT lt_input STABLE ASCENDING BY profile identifier values.
    LOOP AT lt_input INTO ls_input.
      IF ls_input-profile <> lv_last_profile
          AND lv_last_profile IS NOT INITIAL.
        APPEND ls_task_profile TO lt_task_profile.
        CLEAR ls_task_profile.
      ENDIF.
* Based on record identifier
      CASE ls_input-identifier.
        WHEN 'H'. " Header
          ls_task_profile-profile-profile_id = ls_input-profile.
          ls_task_profile-profile-description = ls_input-values.
        WHEN 'K'. " Task info
          SPLIT ls_input-values AT lcl_application=>lv_delimiter INTO ls_task_info-task_id
                                            ls_task_info-description.
          IF lcl_application=>task_is_valid( ls_task_info-task_id ) = abap_false.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Task ID' ls_task_info-task_id 'is not valid.'
                        'No task profile updates done.'
                                INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
            lcl_application=>render_alv( ).
            RETURN.
          ENDIF.
          APPEND ls_task_info TO ls_task_profile-task_info.
        WHEN 'R'. " Roles
          ls_role_id = ls_input-values.
          IF lcl_application=>role_is_valid( ls_role_id ) = abap_false.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Role ID' ls_role_id   'is not valid.'

Oracle Translation Manager or Translation HUB

Hi Guys,
I need to explore about the tool Oracle Translation Manager (6i). From 9i and above its called as Translation HUB. Please send me the link or any details from where i can download this tool and start using it.
Thanks in advance
Guru

Hi Justin,
Thanks for the response. Its a tool for Converting the written words in different languages so i thought of posting in Db as well. I have already posted in Forms Forum and yet to get to get a reply on that.
If you can provide me with any such links or write ups, that should be a great help for me.
Thanks in anticipation
Guru

Oracle Translation Manager

Hi Guys,
I need to explore about the tool Oracle Translation Manager (6i). From 9i and above its called as Translation HUB. Please send me the link or any details from where i can download this tool and start using it.
Thanks in advance
Guru

Hi Justin,
Thanks for the response. Its a tool for Converting the written words in different languages so i thought of posting in Db as well. I have already posted in Forms Forum and yet to get to get a reply on that.
If you can provide me with any such links or write ups, that should be a great help for me.
Thanks in anticipation
Guru

AD FS on 2012 R2 Server Core - management tools

So it seems in 2012 R2, AD FS is now able to be installed in Server Core, I'm assuming because it's no longer part of IIS. However, managing it on Server Core seems "limited" to the use of PowerShell. This is ok but a GUI option from a
client would be nice too. Does anyone know a way to have the MMC snap-in for AD FS on a remote client for management purposes?

Hi,
According to this ms article, i am not find the ad fs is not available on windows server 2012r2 server core:
http://technet.microsoft.com/library/hh831786
Regards.
Vivian Wang
No, you can indeed installed ADFS on 2012 R2 Server Core - I did it. The problem was that the GUI management tools (obviously) aren't available on a pure Server Core install and there doesn't appear to be the ability to use the MMC Add-In from
a client so you're "stuck" using PowerShell to manage it on the ADFS server.
Using PowerShell to manage it isn't a big deal, but as I'm learning about ADFS, I figured a GUI element would be nice to confirm what I've done in PowerShell translated properly to what the various guides give. Arguably, learning on a full GUI server
would have been the better option but, I'm stretched for resources in my Lab environment so this VM needed to consume less resources - which is why I went with Server Core.
Anyway, to get around this, I installed the feature "Graphical Management Tools and Infrastructure." The server is still Server Core, but it now has the ability to run MMC on the server itself, which means I now have the GUI ADFS management
tool on the server itself.
Hopefully for future releases, there will be an ADFS management tool included with the Remote Administration Toolkit

Disk Utitlity has "Lost Connection" with Disk Management tool"

[ Edited by Apple Discussions Moderator; please start a new topic about your technical issue. ]
Running OSX10.3.8
I installed:
"iTunes" (6.0.2)
"iPod Updater 2005-11-17" ((null))
"iChat Update" (2.1)
Went to repair disk permissions
I get this error:
Disk Utitlity has "Lost Connection" with Disk Management tool" Please quit Disk Utility.
then it says quitting Disk Utility may render the disk useless. Stopping the scan just gives a "stopped by User" red text message in the DU screen.
Had to Quit. No other way out.
Now it will not repair "or" verify Disk permissions at all.
What to do?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)

Getting the same results booting off of the install CD. I even ran fsck -y after a soft boot(command S). Note I also installed the iPod updater and iChat update.
I'm getting a crash log that has to do with DiskManagement
Path: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
I tossed the pref file for Disk utility and tried to locate a pref for the Disk Management but nada...
Is there a prefs file that needs to be tossed?
Anyone do a recent Onyx Maintainence cleaning?
Is there a way to do an iTunes Uninstal and reinstall a previous version?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)

'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

Using 4 internal drives, I have specified the following setup for each:
2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
The 4 speed partitions stripe to a single RAID volume correctly.
The 4 data partitions are used to make a RAID 10 volume as follows:
The first 2 data partitions are mirrored to make a 'data-A'
The next 2 data partitions are mirrored to make a 'data-B'
These complete correctly.
Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
"Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

Disk Utility has Lost Connection with the Disk Managment Tool

Hi,
For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
Console Log follows:
===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
Thinking a plist had become corrupted, I trashed the following:
com.apple.systempreferences.plist
com.apple.RemoteDesktop.plist
com.apple.Remotemanagement.plist
com.apple.sharing.firewall.plist.
System Preferences started out very slowly, but then all the panes except Sharing would work ok.
I booted from the install disk and performed a Disk Repair. There were no problems reported.
When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
Thanks,
Bob

I found this crash log that was generated about the time I had problems with System Preferences hanging.
Thoughts?
Bob
Entitled "writeconfig.crash.log"
Host Name: Bobs-Big-Mac.local
Date/Time: 2006-05-15 21:08:17 -0800
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: writeconfig
Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
Version: ??? (???)
PID: 2707
Thread: 0
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000001
Code[1]: 0x90a8d2c0
Thread 0 Crashed:
0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
4 writeconfig 0x0000baac 0x1000 + 0xaaac
5 writeconfig 0x0000ec84 0x1000 + 0xdc84
6 writeconfig 0x0000ad88 0x1000 + 0x9d88
7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
PPC Thread State:
srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
Binary Images Description:
0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib

Re: [iPlanet-JATO] Re: Translation hangs tool (retitled Custom Superclasses and warning T008)

Sonal,
I believe that you are misinterpreting the documentation.
I understand that PgCommon has to extend ViewBeanBase. I tried to
make the following changes in PgCommon and compiled it. Then I ran
the extraction which threw up the following error:
I believe that you are confusing extraction issues with translation issues.
The warning message that indicates the need for a class mapping strategy to
address custom superclasses in the original project is a TRANSLATION time
warning.
T008 No mapping found for [<ndClassType>]
Falling back to [Object]. Please add entry for [<ndClassType>] to
class mapping file, restart the toolbox and re-run the translation.
As such, the remedy for this warning is detailed in the documentation under
the heading
Extraction/Translation Error & Warning Messages
3.3 Notes on MigrationClassMappings.properties
It sounds to me that you have misinterpreted the instructions and have
attempted to modify the original PgCommon declaration, and then re-extract.
This is incorrect. This implies that you see this as an extraction tool
situation, which it is not. This is a translation tool consideration, and as
such does not require any adjustment of the original NetDynamics' object. So
please, return to the original PgCommon declaration, and recompile. Then run
the extraction tool. Then run the translation tool, and make note of the
translation tool warnings and deal with them.
As indicated in the documentation (although perhaps not clearly enough), the
solution to warning T008 is not to make your original PgCommon extend
ViewBeanBase, but rather to adjust the MigrationClassMappings.properties so
that the TRANSLATION tool will take your class mappings into account when it
translates the ND objects into JATO objects.
Specifically, if you add the following entry into the
MigrationClassMappings.properties file:
PgCommon PgCommonViewBean
then the translation tool will cause all classes which previously extended
PgCommon to be translated into new classes which now extend
PgCommonViewBean.
Your final step is to adjust PgCommonViewBean's constructor. Note, we are
talking about PgCommonViewBean here (i.e. the output of the Translation
tool, not the original ND object).
Change it from this:
public PgCommonViewBean()
super(PAGE_NAME);
setDefaultDisplayURL(DEFAULT_DISPLAY_URL);
registerChildren();
initialize();
TO THIS
public PgCommonViewBean(String name)
// Adjust the constructor because this is a superclass
// of the other viewbeans. It is NOT a stand along page
// Therefore its constructor should be adjusted to pass the
// page name argument up to the ViewBeanBase class
super(name);
/* Delete the following lines, they are not needed if this is acting as a
superclass of other viewbeans.
setDefaultDisplayURL(DEFAULT_DISPLAY_URL);
registerChildren();
initialize();
----- Original Message -----
From: "Todd Fast" <toddwork@c...>
Sent: Wednesday, April 25, 2001 5:16 PM
Subject: Re: [iPlanet-JATO] Re: Translation hangs tool
Sonal--
Have you tried recompiling the entire application? It sounds as if theremay
be a problem with incompatible versions of PgCommon and PgReplaceCDSIDwhich
I assume extends it. Blow away all your project class files and recompile
in the ND Studio before trying again.
Also, make sure there are no .ser files hanging around in your project
directory.
Todd
----- Original Message -----
From: <ssingh@n...>
Sent: Wednesday, April 25, 2001 6:56 AM
Subject: [iPlanet-JATO] Re: Translation hangs tool
Todd/Charles,
Thans for all the help.
The client has a small application, in which all pages extend from
PgCommon. PgCommon extends CSpPage. I read through the "Notes on
MigrationClassMappings.properties" file in iMT1.1.1 documentation.
I understand that PgCommon has to extend ViewBeanBase. I tried to
make the following changes in PgCommon and compiled it. Then I ran
the extraction which threw up the following error:
java.lang.VerifyError: (class: prHRAdminDE/PgReplaceCDSID, method:
stLinkToHome_onBeforeDisplayEvent signature:
(Lspider/event/CSpDisplayEvent;)I) Incompatible object argument for
function call
at java.lang.ClassLoader.resolveClass0(Native Method)
at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
at spider.util.CSpClassLoader.loadClass(CSpClassLoader.java,
Compiled Code)
at spider.util.CSpClassLoader.loadClassWithPackage
(CSpClassLoader.java:291)
at spider.util.CSpClassLoader.loadClassWithPackage
(CSpClassLoader.java:217)
at spider.util.CSpClassName.instantiate(CSpClassName.java:180)
at spider.intrp.CSpIntrpModel.createModel
(CSpIntrpModel.java:945)
at spider.intrp.CSpIntrpModel.createNodeObject
(CSpIntrpModel.java:282)
at spider.intrp.CSpIntrpModel.open(CSpIntrpModel.java:500)
at spider.CSpProject.readPostV40ChildObjects(CSpProject.java,
Compiled Code)
at spider.CSpProject.readObject(CSpProject.java:806)
at spider.intrp.CSpIntrpModel.createNodeObject
(CSpIntrpModel.java:293)
at spider.intrp.CSpIntrpModel.open(CSpIntrpModel.java:500)
at spider.intrp.CSpIntrpModel.open(CSpIntrpModel.java:479)
at spider.CSpider.instantiateFirstProjectInstance
(CSpider.java:6404)
at spider.CSpider.createAndSetNewProjectInstance
(CSpider.java:6187)
at spider.CSpider.allocateProjectUserContext
(CSpider.java:5471)
at spider.CSpider.preloadProjects(CSpider.java, Compiled Code)
at spider.CSpider.initialize(CSpider.java:542)
at com.iplanet.moko.netdyn.extract.PseudoCP.createProjects
(PseudoCP.java:136)
at com.iplanet.moko.netdyn.extract.PseudoCP.initialize
(PseudoCP.java:106)
at com.iplanet.moko.netdyn.extract.PseudoCP.<init>
(PseudoCP.java, Compiled Code)
at com.iplanet.moko.netdyn.tools.ExtractTool.invoke
(ExtractTool.java, Compiled Code)
at com.iplanet.moko.tools.gui.ToolInvocationThread.run
(ToolInvocationThread.java, Compiled Code)
===================================
Any more documentation availbale on how to migrate a common base
page? I beleive that it would be a fairly common issue in NetD
migrations.
===================================
New PgCommon
public class PgCommon extends ViewBeanBase implements ViewBean
//]]SPIDER_CLASS END
//[[SPIDER_EVENTS BEGIN
public static boolean DEBUG = true;
//[[SPIDER_EVENT<this_onAfterInitEvent>
public PgCommon()
super("PgCommon");
public void this_onAfterInitEvent(CSpInitEvent event){
Properties props =
HRAdminProperties.getInstance();
DEBUG = (props.getProperty
("hronlineadmin.debug").equals("TRUE"))?true:false;
//CSpLog.setSendErrorsToHtml(false);
//return (PROCEED);
//]]SPIDER_EVENT<this_onAfterInitEvent>
//]]SPIDER_EVENTS END

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

As an asset management tool it should manage all images but only adjust raw

Is Aperture an image management tool, raw converter/workflow tool, or both?
Let it be both! Restrict what is is ALLOWED to ADJUST, but manage it all.
When I do a shoot, I start out with 300-1000 RAW images.
By the time I am finished with the client I will have narrowed the pile of image assets down to 20% of the original RAW files, JPGs of all of those, AND 10% of the selected originals will also end up as layered PSD/TIFF files. But when I go back in and want to open a PSD file then why not allow just that Then save it back as the same or a version..
OR when I tell it to open a PSD file in CS2 it will as "make a version(full or flat), or edit original?" and of course a "don't ask me again for this format" check box!
So why not leave the layered PSD/TIFF files alone and NOT allow them to be adjusted, only managed?
Think about it, IF I want to adjust my multilayered PSD file I will most definitely only trust that to CS2 where I retain full creative control over the layers, and I can output a version if I want!
IF I am crazy enough to feel the need to use the shallow tools of Aperture to tweak the brightness/level/curves/saturation/WB/etc/etc of a flattened COPY of my layered PSD file then I will make a copy and drag it into Aperture. By shallow I mean that CS2 and layers has much more control than the single layer tools of Aperture.
As an option leave it open as a configuration choice in the prefs... "Adjustable image formats: RAW, JPG" and even on a per image basis, right-click--> image status-->Adjustable or Unadjustable.
Yes, I sent this idea off to Apple!

Moki,
Right there with you. Here's my rough scenario:
1. I shoot 500 RAWs.
2. Cull down to 100 keepers.
3. Client culls down to their 50 selects.
4. Anywhere from 25-50 become layered PSD files, depending on the presentation the client wants (sizes, packages, borders, special effects, etc.).
5. In addition to those 25, there may be *completely new* composites (PSD's) created from combinations of the 25 -- this isn't a version of one of the original masters -- it is a *completely new* image that Aperture needs to manage in the project (so import of PSD without flattening and/or allowing Photoshop to Save-As into the Aperture library is a must).
I'd even add to your request about allowing adjustments. It would be totally cool if the adjustment tools were context-sensitive, enabled when working with an image (like RAW or JPG) where Aperture can adjust, and disabled when working with an image (like layered PSD or TIFF) that it won't adjust.
Anyway, I have complete confidence that eventually, the RAW conversion will be fixed, so even though that's an immediate glaring issue, it doesn't seem to me to be the long-term workflow killer. Being able to traverse this editing stage of the workflow with Photoshop is crucial. Without this, its basically
a complete project export after the initial organization stage, and the rest of the workflow is either managed entirely in another tool, or a complete pain to bring back into Aperture for output, which leaves files strewn everywhere for backup and archiving.
Brad

Translation Management Tool FWM 01014

Similar Messages

Maybe you are looking for