Translation Pattern Usage Report
I am trying to determine if a translation pattern is still needed. Is there a report that can be run? Call Manager Release 6.1. Thank you.
Hi,
You can try to check in CDR for the Called Party number (Original and Final) if they match the Translation pattern or the Called Party Transformed number (using Mask or Prefix).
HTH,
Jagpreet Singh Barmi
Similar Messages
-
Is there a way to generate a translation pattern report? We have a quite a few translation pattern entries and trying to copy each one onto a spreadsheet would really be time comsuming. I've searched and cannot find anything, hopefully someone can point me in the right direction or may have a suggestion other than copying and pasting. Thanks
You can use the import/export option for TPs.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Translation Pattern digit problem
We have created a translation pattern (6925) which allows our users to call an internal number in order for them to get routed out to their external helpdesk via the PSTN (908456016925). Initially this didnt work as the translation patter number of 6925 did not have the correct Calling Search Space to get routed out of the voice gateway.
That is now fixed however every time you dial 6925 you get a dead tone when dialling the number 2. If you press 5 immediately the call routes to the translation pattern and out to the helpdesk. This is not ideal as many users are putting the phone down when they get the dead tone as they think the number is incorrect.
I have checked our dial plan route plan report and can confirm that no other device etc has been allocated a number beginning with 692.
I've also created another translation patter (6935) to the same PSTN number and this works fine ie no dead tone when I dial the digit '3'. In fact I have tested 3,4,5 etc and they are fine its just 692.
Any help would be appreciated.......
BSOCMy first step would be to remove the 6925 translation from CM. Once removed, I would try dialing 6925 to see what happens, knowing full well that it should not work. If there are any other patterns or devices beginning with 69 it should fail after pressing the 2 since there is nothing that matches. I would then add the 6925 translation back in and test again. Let us know!
Tony -
How many times is my Translation Pattern being used?
I am running CUCM 8.5.1. I have about 50 or so translation patterns. Is there a report that can tell me how many times each translation pattern is being used daily or weekly?
Here is the entire setup and my problem.
Service Provider is sending 9725 and 3131.
Voice Gateway is doing a Num-Exp to 2604 and 2403 (respectively)
Then, the Call Manager is doing a translation on both numbers to Route Point 7824 which then triggers UCCX.
Two numbers for one purpose. I would like to remove 9725 / 2604 but I'm not sure how many times it is being used. Are the calls that are hitting my route point coming from 9725 or 3131? I can't tell since they both are being translated to the same Route Point.
Whats the best way of finding out? Thanks for your time guys!! -
Translation-pattern delay to outbound call
Hello,
I config one translation-pattern: 1234 tanslation to one mobile number (call ouside to PSTN via E1 link)
and also config T302 time value = 5000 (default 15000)
When I dial 1234, I will get a dial-tone, then waiting 5 second -> the call active.
Is it normally?
Or what could I do to resolve it?
Thanks.What you are experiencing is expected, this is what is called Inter-digit time out. What is happening is that within your dial plan there is another pattern (could be another Translation Pattern, DN or Route Pattern) starting with "0".
The following Cisco document explains this behavior:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/6171-interdigit-timeout.html
Now going back to your concern and moving forward with the explanation, the Unified Communications Manager Platform is designed to route calls based on the closest match. When you dial "0" since there is another pattern starting also with 0 in your dial plan then, CUCM will wait for more digits. It is not until the T302 timer (that the document above mentions) expires that CUCM routes the call based on the order of the partitions set or configure on the routing device (in your scenario it is going to be the CSS of the Translation Pattern)
You will be able to check there is an over-lapping pattern within your system by going (in the Administration page for Call Manager) to Call Routing > Route Plan Report and:
1) Type 0 on the search bar and hit search and all the results starting with 0 should display.
Or
2) Exporting your dial plan to a .csv file, open it with excel and apply filters to find the overlapping problem.
You can also reduce the T302 timer from the Call Manager service parameters from the default value (15 seconds) to a minimum of 3 seconds.
Hope this information helps -
Call to translation pattern took longer to reach the translated DN
I translated 0 > 9000 which is pilot number for CUACE, noticed when press 0 to dial using particular CSS it's taking a few seconds before the call translated to 9000 and hear the ringing tone.
Which part to check on this?
ThanksWhat you are experiencing is expected, this is what is called Inter-digit time out. What is happening is that within your dial plan there is another pattern (could be another Translation Pattern, DN or Route Pattern) starting with "0".
The following Cisco document explains this behavior:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/6171-interdigit-timeout.html
Now going back to your concern and moving forward with the explanation, the Unified Communications Manager Platform is designed to route calls based on the closest match. When you dial "0" since there is another pattern starting also with 0 in your dial plan then, CUCM will wait for more digits. It is not until the T302 timer (that the document above mentions) expires that CUCM routes the call based on the order of the partitions set or configure on the routing device (in your scenario it is going to be the CSS of the Translation Pattern)
You will be able to check there is an over-lapping pattern within your system by going (in the Administration page for Call Manager) to Call Routing > Route Plan Report and:
1) Type 0 on the search bar and hit search and all the results starting with 0 should display.
Or
2) Exporting your dial plan to a .csv file, open it with excel and apply filters to find the overlapping problem.
You can also reduce the T302 timer from the Call Manager service parameters from the default value (15 seconds) to a minimum of 3 seconds.
Hope this information helps -
Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Best Usage reporting tool for SharePoint 2013 (onpremises)
Please suggest me best reporting tool for SharePoint 2013 on premises.
Need to get site usage summary for any time in last one year.
Need to get library/list usage summary for any time in last one year. etc.
How many peak hits and unique no of users across all levels.
Thanks, Ram ChHi Ram
We have two links “Popularity Trends” and “Popularity and Search Reports” in the site settings. By Clicking on the two links we can view the usage reports in SharePoint 2013.
More references:
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
http://sureshpydi.blogspot.com/2013/06/usage-reports-and-popularity-trends-in.html
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.prweb.com/releases/2012/8/prweb9821144.htm
Amit Kotha -
Hello,
When I am opening usage reports under Site Settings > Site Administraton > Popularity Trends, i cannot see any data after 9th May 2014. It stopped working and all the numbers coming to zero after 9th may.
I tried many solutions that are given on internet for this issue like restarting timer job, enabling usage on usage service application, permission on log files, etc.. but none of them worked for me.
Please help me out. Is usage report depend on any service? search is working fine, usage service application is working fine.
Thanks.
chiragHi chirag,
For troubleshooting your issue, please take steps as below:
Make sure the Web Analytics Data Processing Service and Web Analytics Web Service are started on each server.
Make sure web analytics service application is started
Deactivate and Activate the site collection Features on Reporting.
Check the detail error message of ULS log to determine the exact cause of the error.
Also you can have a look at the article:
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/30d11d27-6708-4bfe-a7d3-4b0aed522e7d/site-web-analytics-reports-no-more-data?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Usage Report Results Confusion
Hi Everyone,
Here is some background before I ask my question:
I set up a hierarchy and populated it VM entities no problem. I set up my own basic pricing model that was based on "Actual Usage" and had no base rates, no fixed costs, no other costs, and no rules associated with it. I ran a couple usage reports using this pricing model.
The first usage report I generated on my hierarchy was for the time frame 11/06/2012 to 11/06/2013 (1 year) and the report produced results which I looked okay. I only asked for it to show CPU, Memory, and Storage.
So I my second usage report on the same hierarchy and for this one the time frame was set for 05/06/2013 to 11/06/2013 (6 months) and the the results produced almost exactly DOUBLE the usage for EVERY resource.
I thought this was strange considering the time frames overlap and if anything the YEAR time span would have to have at least the same usage stats if not higher than the 6 month time span it includes.
So, my question is, did I mess up the pricing model or billing policy somewhere to have this happen? Or does the usage report generate on an average of some sort?
I just can't figure out how this is possible.
Thanks for any help in advance!
-RichieHi Richie,
Can you please attach the pdf reports for the same issue and tell about the problematic VMs. I will try to give you an explanation for the same.
Thanks,
Aanjaneya -
Usage Report and Audit Log report showing different totals
I am trying to understand the differences displayed in two similar reports. The first report is an 'Audit Log' Report and it is displaying the number of Resource Account creations over a time period. The second report is a Usage Report using the exact same criteria (objectType = Resource Account and Action = Create). The totals I get back are VASTLY different. Can anyone explain? Is this a known bug?
Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi -
If a group text message is received by multiply numbers on the same account will the number that sent it show up on each individual numbers usage report?
@laxmommy,
Great question! When you receive a group message it will show the number of the person who originally sent the message.
John_VZW
Please follow us on twitter @VZWSupport -
Usage report and storage profiles
Hi all,
I'm trying to create a usage report i CBM that shows the storage consumption devided in storage policies. I have 2 different storage policies and they are both visible when editing infrastucture cost.
When generation a cost report I can see the storage policies, but not when I'm generating the Usage Report - wich is the one I really need. I only get the storage usage - and cant differ between the storage policies.
Any ideas?
I'm running CBM 2.6.
Thanks!Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi -
Hi team,
I can't find the "monitoring usage" report, that previously was easily accessible from at least a couple of pages, including the main application builder page, if I am not wrong.
Is it gone for good?
Bye,
FlavioFlavio,
It's still there.
From the main HTML DB Page, under Workspace Administration, click on "Manage Workspace". Next, click on the "Monitor Activity" icon. You'll see a set of user activity reports.
Thanks,
- Scott - -
Usage Report Shows Zero (0) Hits
All:
When I view the Excel Usage report for my site collection as described here
here, it shows zero hits. Same for my top-level site page. I've gone into Central Admin and confirmed the Usage and Health Data Collection service is running
as described
here and that it is properly configured. Via PowerShell, I've also confirmed the EnableReceivers property is set to true as described
here .
Still no luck. Nothing but 0 hits reported. Any other suggestions on how I can get this working?
Thanks,
Bill
Bill DavidsonUser analytics take 24 to generate data so check after 24 hours.
Also hope you have followed
http://sharepoint.stackexchange.com/questions/32858/web-analytic-show-0-visitor-since-last-2-weeks
id you configure Usage Collection from the SharePoint Central Admin.
Central Administration > Monitoring > Configure usage and health data collection
Please ensure Enable usage data collection (is checked)
Events to log:
Content Import Usage
Content Export Usage
Page Requests (This option must be checked)
Feature Use
Search Query Usage
Site Inventory Usage
Timer Jobs
Rating Usage
After you enable Web Analytics , SharePoint automatically does not start making analytical data unless we specify data that needs to be captured and saved on the analytics service application database.
SharePoint will created a service application database typically named as "WSS_Logging" after you provision Usage Collection Service.
If this service is already present , then I would suggest to reconfigure usage and logging service once again. It should work.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/30d11d27-6708-4bfe-a7d3-4b0aed522e7d/site-web-analytics-reports-no-more-data?forum=sharepointadminprevious
Try this hotfix, it fixed mine.
http://support.microsoft.com/kb/2459125
If this helped you resolve your issue, please mark it Answered
Maybe you are looking for
-
Sound of Music in music or video app or on net & games is not playing on my new iphone 3gs with iOs 5.1.1 only ringtone is playing.
-
Webdynpro ABAP in ECC 6.0 version
Hi to all, I am trying to create one simple webdynpro application but In view layout I don't able to see elements. Can anybody please tell the possible reasons behind it and how to solve this? Regards, Umang
-
How to fix msg=ORA-01882: timezone region not found
Hi, Im new in ADF development and I have this problem, I have a error message: (oracle.jbo.JboException) JBO-29000: Unexpected exception caught: java.sql.SQLException, msg=ORA-01882: timezone region not found I dont know how to fix it, please help me
-
BB desktop software for Mac OS 10.4
Sorry, there is a version of BB Desktop Software compatible with Mac OS 10.4? Thanks to all...
-
Can anyone provide some pointers on how to install oracle web services manager? Do we need oracle AS 10.1.2 or can we use an embedded oc4j. Any pointers really appreciated. thanks