Translation Ratio Changes - Future Errors?

Hi fellow SAP'ers,
I'm trying to locate some experience with companies that have changed translation ratio's after go-live. I always understood that SAP does not recommend this, but cannot find any literature or OSS warnings that there are any issues other then future dated postings with the old ratio's present.
Please let me know your own experiences or any OSS notes/warnings where SAP says it's not good to do.
Thanks,
JIm

Hi
I dont think you will face any errors without the update
regards
krishna

Similar Messages

How to change the error message Invalid login credentials

Hi all,
How to change the default error messages .
1) In the Login page while giving wrong username or password .It showing
Error message "Invalid login credentials".
But requirement is change the above error message.
2) I need to change the error message instead of "1 error has occureed"
Thanks in Advance
Sudhakar

On the Login Page of the application create a 'Before Header' process with this code if apex_application.g_notification ='Invalid Login Credentials' then
apex_application.g_notification :='Your Altered Failed Login Message Here';
end if;varad

Changing the error message

Hi,
 
 How do I change the error message generated for a function such as an expired login.
 
 <?php echo $tNGs->getErrorMsg(); ?>
 
 Thanks
 
 Laurence

Hi Laurence,
ADDT´s error messages are spread across all those XYZ.res.php files located in the includes/resources folder -- and in your case it seems to be the file "tNG_pro.res.php" which provides the error messages related to the login.
In here you´ll find two message variants : one for ADDT´s "development" mode, and the other for the "production" mode. As you most likely will not need to edit the "development mode" messages which are identified by a trailing "_D" in the variable name
(e.g. BADWORDS_SQL_ERROR_D), you´ll just need to adapt the "production mode" messages
(e.g. BADWORDS_SQL_ERROR)
Cheers
Günter Schenk
Adobe Community Expert, Dreamweaver

Aspect ratio changes?

I have edited a short film shot entirely in 16:9 on a 4:3 timeline (unaware I was doing so). So when I export my "widescreen" film, it is a 4:3 video with black bars on the top and bottom. So what I thought was if I create a new project, use "DV-NTSC Anamorphic" with the Easy Setup option, and create a new sequence, my entire film will no longer have black bars at the top and bottom. It will just be a 16:9 video. Well, I was wrong. In the new setup, every single clip is "squished", and it looks like if I wanted to fix it, I'd have to go through every single clip, re-import it, and have an adjusted aspect ratio... and I don't want to do that. Is there an easier way?

How is the Aspect Ratio changing?
Was the shooting Mode changed on the camera, between scenes, say from Standard to Widescreen? That would be a change in PAR (Pixel Aspect Ratio), but would show up the difference in the Project.
Also, are you in PAL-land, or NTSC-land?
Good luck,
Hunt
Hi Hunt, no the shooting mode was the same - wide screen, dv cam pal

Change future periods for Fiscal year variant-OB29

Hi experts,
We are using 4-4-5 rule, Fiscal year variant is M1, Future Periods for FY variant M1 is not maintained correctly. Our year end is on 6/25/2011 but in our variant M1 it is defined as 7/2/2011 and periods following that are defined incorrectly.
Company - US (4-4-5 rule)
FY variant - M1
Period - P12/2011 and following periods are not defined correctly
1.     There are risks involved if you change the fiscal year in Live SAP system. What is the risks for changing future periods - 2 months from now.
2.     Posting are not carried out for the periods we are changing. We need to check plan data if any
3.     Impact on other modules, organization structure, master data, transaction data
4.     How intense the testing needs to be.
Any help will be appreciated and point will be assigned.
Thanks
Monica

Hello,
If you change the Fiscal year period in the live system the following problems may come as per my understanding.
For Costing Module Planning would have already been carried our at the start of the year,
similarly for CS, PP and PS modules if they are implemented in your company the planning data will be effected.
If there is any Budjet posted even you have to consider how to change the budget and reaccolation
Best Regards,
Ravi

Pasting problem between sequences. Aspect Ratio changes. Help

Hi. I'm fairly new to FCP so be patient with me. I shot HD using the Panasonic format 1080i. I transferred the footage from the SDHC cards using Apple Pro Res 422, 1920x1080. Everything was going fine in editing until I tried to copy and paste clips from one sequence in the timeline into another sequence. The aspect ratio changed in the clips I pasted. I tried to figure out what to do by looking at Sequence Settings and Clip Properties but to no avail.
Any suggestions? I am building separate sequences and then need to paste these together to make a QT movie or DVD for client so need help asap. I've previously worked with JVC HD cams using the 720p24 codec and never had this trouble when cutting and pasting.
Help!!

This is not weird at all. One sequence is set to use square pixels (1920x1080) the other is using non-square pixels (1440x1080).
You need to fix the non-square pixel timeline.
The simplest to understand method to fix the non-square sequence issue is to create a new sequence with the proper settings then copy your material over from the non-conforming sequence.
To get a new sequence with the proper settings (if you have FCP7) all you need to do is "create new sequence" then drop one of the clips into the new empty timeline. If the settings do not match, when the program asks you if you want to change the sequence to match the clips, say yes.
Then select all the clips in the non-conformed timeline and copy and past them in the new correct timeline.
x

Reset/change password error - cannot log in to builder - HELP!

I'm encountering the same problem I described some time ago here: Reset/change password error - cannot log in to builder
Briefly, the builder tells me I must change my password. When I attempt to do so, the password change page displays a null username, and tells me that my existing password is invalid. The same password failure occurs using the new password emailed to me by the "Rest password" function.
I've cleared my browser cache, closed the browser, rebooted my client (WinXP), to no avail.
Anyone able to help?
Thanks
jd

Update:
Workaround: log in using a different client machine.
Scary.
It looks the same problem reported, without response, here: Apex.oracle.com SaaS Login - Must Change Password.
jd

HI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean lan

Daniel SterchiHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..
forumnotifierHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..

First of all, uninstall it with the uninstaller.
Then:
Install the ENGLISH version.
Change the language in the CC app to Korean.
Install the Korean version. (DON't uninstall the English version)
Change back the langauge in the CC app to English.
When your OS is running in English, InDesign will run in English with Korean functionality added, if your OS is running in Korean it will take the Korean User Interface, so let your OS run in English.
Every installer language will add needed plugins for the work with that language. E.g. If I install Hebrew, I get RTL functionality in German version, only if I would change the OS language it would change the language of InDesign, InDesign takes always as UI language the language of the OS if available, if not (in your case you have uninstalled English before), it takes any version which is available in the order of languages specified in the OS.
If you need to run your program in a different language than the OS but you have installed it in the language of the OS it becomes more difficult. You would have to use some system tools which are able to force a program to open with a different language. Most of those tools are freeware.

Lost translation ratios in BCS

Hi,
we are using the curency conversion functionality in BCS 4.0. Exchange rates, exchange rates types and indicators as well as translation ratios have been defined in the system. However the system "forgets" the translation ratios in every new period and they have to be entered again. This also happens with past periods.
Thank you for any hints.
Stefan

Hi Stefan,
I may suggest that you use a currency with indirect quotation.
In this is the case, enter translation ratios for BOTH quotations, for example:
YourCurrency to USD as 1:1
and
USD to YourCurrency as 1:1.
Certainly, ratios might be not 1:1 in your case.
Hope it helps,
Eugene

Programatically change the error message thrown by ADF Method validator

Can I change an error message being displayed by an ADF Method Validator?
The message of the method validator can be specified declaratively using the Wizard. But is there anyway I can programatically change it inside the body of the method validator?
Inside a method validator i will check for about 5 conditions and each condition will have a separate error message to reflect the error correctly. I can't use a single message declared by the wizard.
regards,
Anton

Hi,
I think you should look at the follow links, hope they can
help you
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
#Troubleshooting a 404.13 issue using IIS and Failed Request Tracing logs
http://blogs.msdn.com/b/amb/archive/2012/10/10/troubleshooting-a-404-13-issue-using-iis-and-failed-request-tracing-logs.aspx

Attribute change run error in daily job (BI 7.0 SP 23)

Hi All,
We are facing an Attribute Change Run error in one of our daily batch job.we donnot see any locks in SM12.and a dump occurs in ST22.we also donnot have any master data load running at that time .We executed the the FM RSDDS_AGGR_MOD_CLOSE,but the Change run error occurs frequently .How to get the root cause of this issue as we donnot have any master data load running at that time.
regards,
maria

If you are sure that your master data is 0MATERIAL then GOTO-RSA1>Tools in Top>Select Attribute Hiearchy Change Run>Select Info Object List>Select 0MATERIAL>Execute.Then message "Attribute/Hierarchy change run scheduled" will appear in the Tab on your User ID.Once its finished your masterdata is activated.
For Activate Master Data we can do another method like "Right click on the particular Infoobject which need to activate and click "Activate Master Data".
The above steps is for manual activation of master data changes..
If you want to automaize the above steps "Need to add Attribute/Hierarchy Change Run" in the process chain.When execution of Processchain it will activate all the master data in the list one by one and also realign the Aggregates which using the master data objects.

SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).

Deployment to the client is successful but the error reported within Clients "SCCM Software Center"
The software change returned error code 0x87D00324(-2016410844).
Also States on "Status" Past Due - Will be Retired"
Can't figure this one out and I did some googling with no success in finding a solution?
I am running an Adobe Flash install (.EXE)
Any help or direction would be greatly appreciated
RF

Hi,
Thank you for your response
""Wow6432Node is not valid on x86 systems."""
Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
When I first created the detection method I had only created the "WoW" Check
for Flash value in the reg, which was running against both x86 & x64 Win 7
systems, and forgot to include the x64 check/, either case, the error appeared
on the WOW check. Presently I have 2 "Detection Clauses" one for x86
and the second clause is x64 ( non WOW Path), and still receive the same erorrs
on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
""""Also, why use the default value? I doubt there's anything in there (the default value is the
value display in a key in regedit with the name of
"@").""""<o:p></o:p>
When Default Value is selected the boxes/options below that allow for more detailed
information to be entered when performing the "reg check"? This is
where I had been able to enter specific Build/Version to look for, Flash
11.4.402.265, so that if it does not discover the build # it will proceed with
the install.....<o:p></o:p>
I figured having the option to check for Build/Version # would omit SCCM reinstalling on
systems that have build 11.4.402.265 already?<o:p></o:p>
From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
entries and the true x64 reg entries in both locations when installing.
Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success] all others { / In Progresss / Error /Unknown } has no info......
If this helps provide further details.....
Thanks
Regards,
Ron
RF

On ms outlook 2011, I get could not change identity error?

On ms outlook 2011, I get could not change identity error?

Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Master data attribute change run error

hi all,
plz tell me the procedure to overcome the masterdata attribute change run error.plz explain me with steps clearly
thanks in advance,
jack

Hi Jack,
The process of Attribute change run is just the activation of the Master data same as DSO's.
In RSA1>tools>Apply Hierarchy/Attribute change run(CRTL+F9). You can check your object for which the attribute change run has to be applied through the infoobject list.
Then execute. now the attribute change run is completed.
Please ensure the infoobject is activated.
Provide us the error message to give you more details.
Regards,
Ravi

AGIS Inbound 'Transaction Status' changes to error on clicking Approve

Hi,
AGIS inbound 'transaction status' changes to error on clicking Approve or Apply button? how to find what is that error as I am not able to find any error message.
What are the causes for this error ?
I manage to generate the outbound transaction. When the recipient has received and approve, it shows an error under - Transaction Status and in the outbound side it shows Batch Status as Error.
Can some one help to to find out the way to fix it.
Thanks in Advance,
Thejas

Something might have gone wrong in the Workflow. Please check the metalink document 785167.1
Thanks,
John.

Translation Ratio Changes - Future Errors?

Similar Messages

Maybe you are looking for