Translations into a transport request

Hi all,
The question has been asked before here at this forum, but I haven't found a satisfacory answer yet.
I have to change the translations of some smartform texts using se63. After having made the changes, I am not forced to add the changes into a change request.
How do I move these changes into a change reuest? We are on 4.6C and the report RS_LXE_RECORD_TORDER or transaction SLXT are unknown. I did not change the smartform, only the translations.
Thanks,
Bertus

Hi Bertus,
Use sa38 and execute the function RS_LXE_RECORD_TORDER.
Choose the Target Language (you will need one for each language)
Choose Workbench Request (it will create automaticaly)
in Filter Tab
Object Type : SFF
Object Processor: <your username>
and Execute (F8)
Select from the list what you need to put in the Order.
./msr

Similar Messages

Unable to capture the Data Source into a Transport Request

Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.

Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu.

Copy contents of a txt file into a transport request

I am implementing the steps of the 990534 note.
The note says "Create a new transport request (transaction SE09) in the source client of your Solution Manager system. Unpack file SOLMAN40_MOPZ_TTYP_SLMO_000.zip, which is attached to this note. Copy the contents of the SOLMAN40_MOPZ_TTYP_SLMO_000.txt file into the transport request."
can anyone tell me how can I copy the contents of a txt file into a transport request?

Hello,
I don't know the OSS note, but I think they mean, that you have to go into the object list of your transport (in transaction SE09), switch to change mode and insert the objects from the text file.
I guess the text file looks like:
R3TR PROG xyz
R3TR TABL abc
Best regards
Stephan

How to include an INCLUDE into a Transport Request

Hi Experts
Requirement is to add an INCLUDE program object (which is not part of any other request) into a Transport Request. I followed the below steps:
SE01 -> Entered TR# -> Display -> Request/Task -> Object List -> Include Objects.
In the selection screen of "freely selected objects",
selected objects -> Program = LZ123T00 (which I need to include).
Then, Execute!
It shows: No objects were selected!
How to fix this error?
Regds

Hi Varun
thx for ur reply. I tried this. it seems the INCLUDE alone cannot be written into the TR.
it says: "Cannot be added. The object is part of some system object"
If we add the whole Function Group to the TR, will it help? Will the TR hold all the associated INCLUDEs declared in this Function Group?
plz advise.

ECC 6. 0 - How to include translations into a change requests

Hello everybody,
we are developing in ECC 6.0 and we are experiencing the following problem: when mantaining the text elements of custom programs into the required languages, the system doesn't ask to type in or create any change request. It just saves the traslations.
We would like to be asked to create a new change request so that we will be able to transport the translations into the other environments...
does anybody knows how to activate this funcionality?
thanks
Regards
Marco

Try going thru this link and see if it helps:
http://help.sap.com/saphelp_nw04/helpdata/en/d4/73c33e3a443907e10000000a114084/content.htm

Error adding BW object into a transport request

Hi all, I'm modifying an OHD and when I'm trying to save into a new request I got the following error: "Attention!. The selected object is already locked by another transport request". And it shows me which is the TR that has the object locked, however, when I go to SE10 in order to check if the object its locked there, it is not!. Any ideas on how to solve this problem?
Mauro

Did you try unlocking from SE03 - enter that request which system warned and execute and try collecting the Object again in new request
SE03 - Search for Objects in Requests/Tasks - enter IOBJ - Obj tech name - select Modifiable option and execute .. you will see the request numbers .. where this object is locked

One Transport request objects copy into new transport request

Dear Experts,
I created a transport request under which i saved my objects. <b>Now i need to copy old request objects into new request or split that transport request into number of new transport requests.</b> First of all It is possible or not , if it is possible please tell me the solution how to do.
Regards,
Krishna

Hello Krishna
You can
(1) add object lists of already released requests ("old" requests) to you current request (still changeable)
(2) merge changeable transport requests together
(3) split a changeable request into several requests
Whereas (1) and (2) are supported by standard functions of the SAP system (3) is a manual task involving the following steps:
a.) Create a new request
b.) Copy required transport entries (e.g. R3TR TABL ZMYTABLE) from one request to the new request
c.) Delete all copied transport entries from the object list of the "first" request
However, if you are not fully aware of the dependencies between different transport object entries the splitting of object lists may cause hassle when you import the splitted requests into the next SAP system.
Regards
Uwe

Including logical path into my transport request!!

hi i have defined a logical filepath for my report from where it will read the files ....
can i include this file path in to my TR...which i have created using transaction FILE if so how should i include..
thanks.

HI..
When you log into the FILE transaction it says cross client table.. So that means it is a customising change..
You need to create a customising request and include the change in that request. this is to move it from one system to another.
that is dev to quality for eg.
but to get it in all clients in dev you dont have to do anyting. since it is cross client you will get it by creating in one client itself.
regards
ansari

Issue in BI Objects collection into Transport Request

Hi Experts
I am experincing a Issue in collecting Infocube and related objects into a transport requests using transport connection.
My Scenario is as explained below
1.Migrated 3.x Dataflow into BI 7.0 Dataflow
2.Dataflow consists Infocube -->DSO (two separate DSO) --> Infosource (only 1) --> Datasource (from 2 different Source systems)
I have manually captured all my objects into a transport requests. i.e while activation.
The issue is when I try to use transport connection on this infocube with "Dataflow before" & Automatic collection options.
I am getting the below mentioned error.
Object '4C3C4WGBCRK9UWKNDGGYNKDNA' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '4C3C4WGBCRK9UWKNDGGYNKDNA' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
I am sure that all my objects are collected into transport requests & I checked the object entry of all the dataflow objects..
Appreciate your valuable inputs on this.
Thank you in advance
PKC

In that case, pls ignore my prevoius post...
The issue is when I try to use transport connection on this infocube with "Dataflow before" & Automatic collection options.
With this option, system should have collected the related routines. Did u expand routine node, and check (ON) the check box for that routine ???
(Once all objects got collected, now from the right most window, expand each node (application, infoarea, routines etc) and put checkbox 'ON' (checked) to ONLY the objects (routine 4C3C4WGBCRK9UWKNDGGYNKDNA' ) u want to transport. Once u r done with that, click on Transport (truck Icon) and enter package name, if system prompts.)

Include table entries into Transport Request manually @ SM31

Hi All,
I have an issues reg table maintenance at SM31.
We have a Z Table and I can add entries at SM31 to that table. But:
System has not asked Transport request while saving the data (after additions to the table)
Option to include in Transport Request manually is not available @ menu -> Edit -> Transport -> Include in request. Include in Request is not highlighted to select here.
Pls help me the process to add my table entries into a Transport Request.
Thank you
Chandu

Hi,
seems like your table is defined as Application table (master and transaction data).
Check SE11 to be sure
Database table: enter name > Display > Delivery & Maintenance
Delivery Class > is this A?
If so then there is no transport and it can be maintained in all systems.
You could try if required to create manual transport via SE01.
Programm ID: R3TR
Object: TDAT
Objectname: your table name
Regards
Hein

Collecting ABAP's into Transport Request

Guru's
I have about 100 ABAP Programs that start with ZC* these are all transported into Q system. But now due to technical reasons we are collecting Individual objects into different Transport requests to import into our Q & P systems respectively... Collecting Infoareas,DSO's,Cubes, and etc.,. had been quite easy.
Now the issue : Is their a possibility that I can collect all the ABAP's in one shot and these should include the dependencies (Tables;FuMo's) etc.,
A tip in this regard would be highly appreciated.
Regards
BVPK

Hi BVPK
I think there isn`t such a easy way you want to go.
But I`ve got a little work around to make it easier (I hope)
Call TA: SE03 --> select "search for requests --> press F8
Next screen, pres F8 again --> select/create a transport request -> press (Ctrl+F11) "include objects"
select "free choosen Objects" (sorry, it`s a german language system here) and enter.
--> now tyoe in the paket, your allready transported objects are assigned to --> F8
Now you got a stuctured list with all your components. You can mark (F6) every single entry you need and include all the marked in your selected transport request.
Hope this helps a little bit
Greets
TOM

How to include .txt (notepad file) into Transport Request?

Hello,
We are configuring the SolMan Service Desk (SPS15) and the IMG says that we need to activate BC sets and we did that.
There is a note 898614 (Service Desk-BC sets) states that for the installation we need to Copy the contents of the file Piecelist_Service_Desk_Initial.txt to the transport
request.
Can anyone help me the procedure how do we go about this activity and if i do this on the Development Client can i move this to the Producation too.
Thanks and Regards,
Rao
Edited by: Rao on Jul 28, 2008 3:56 PM

Hi,
You just need to open the text file and copy the entries into the transport request.
Below is the procedure on how to copy the entries into a transport request.
Goto trx SE10 --> Create a transport request --> Double click on the request --> selcts tab 'objects' and paste the entries there.
Pl reward points if it helps.
Thanks,
Naga

Error while releasing transport request

Hi,
When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
Thanks in advance.
Arvind...

Hi,
This is more related to the BASIS side,
still have found one solution in one of the thread. Still contact you BASIS administrator for it.
Solution.
Is the error pointing at TP or R3trans?
In this phase, we get error coz of r3trans.
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Jayant Sahu

Adding objects to transport request

Hi all,
I need to add a generated SAP object into a transport request.
How can i do this without making changes to the object?
Thanks.

Hi,
You need to create a Workbench TR request in SE09. Go to the detailed screen of the transport. Go to change mode. In the objects tab, you can see a table for the object details. click on the ADD button. Give the Program ID as R3TR. Object ID depends on the object type. You can find the list of values in F4. In the object name, give your object name. Select that entry and click on the LOCK button.
The object will be locked under the TR.
Reward points if helpful!
Thanks and Regards,
Lakshmi.

Creation of transport request

Hey Sap Gurus,
Does anybody know, how to create a Customizing transport request ( and it s task) and assign it some entry for a specific view ?
I mean I m creating a program which can add/remove massively the entries in view for structural authorization T77PR, and I would like when I change the entry add them in a new / selected transport.
Is there any already built-in FMs for this ?
Many thanks for all your helps
Regards
Hadrien

Hi,
Check out the following function modules.
For assiging an object to a transport request, you need to first maintain a tadir entry (object - package assignment). The function TR_TADIR_INTERFACE provides this functionality. Then the objects an be inserted into the transport request using the FMs TR_OBJECT_CHECK & TR_OBJECT_INSERT. They 'll prompt the user for the transport request..
If tadir entry is already maintained, you just need to call the other two functions..
TR_TADIR_INTERFACE: for creating tadir entry for the object
TR_OBJECT_CHECK: for object check. Required to be called before inserting into a transoprt request
TR_OBJECT_INSERT: for inserting the object into the transport request.
~Piyush Patil

Translations into a transport request

Similar Messages

Maybe you are looking for