Translations not taking place effect in print forms

Hello All,
I have made some translation changes to my pdf form using SFP transaction. These changes are not showing effect immediately but after two to three days, these changes are working. Does it take that much time or am I missing some thing.
Please let me know.
Thanks,
Rakesh

Hello Aravind,
I restarted ADS server also. It did not showed me any effect. Please let me know the other options.
Thanks,
Rakesh.

Similar Messages

Enhancement Section Activated but changes not taking place

Hello Friends,
I have been getting a dump error for FM GN_DELIVERY_CREATE_FOR_DIALOG which says that
"spe_version" does not exist in table "LIPS".
I found a enhancement option that commented out the perform that lead to the subroutine which has the error code.
I have activated business function LOG_LE_INTEGRATION via SFW5 which activates among others switch LE_SFWS_SC3.
I can see the global status of the switch as ON.
This switch is associated with enhancement spot ES_SAPLV50S which has implemented an enhancement section in inlcude LV50LF14 lines 191 -194
However, despite activation the changes are not taking place and i am still getting a dump error.
I am also not able to set a break-point in the FM because the program cannot be generated
My question is: Is successful program generation a pre-requiste for enhancement source plug-ins to be effective?
Any pointers would be highly appreciated.
Thanks,
Minhaj.

Hi Minhajuddin ,
With "enhancement spot" we have come across similar short dumps and inactivation of spots even when steps are taken as per procedure.Please check if any notes are available for the same ,since most of the time it fixed the problem.
Regards
Byju

Why is there not an option to only print form data in Adobe XI?

I have created a form in Adobe Acrobat XI Pro and saved it. Then I want to open it in Adobe Reader, fill it in and then only print the form data but there is not an option to only print form data in Adobe Reader XI. I'm not sure if it is in the way I created the form or something else. Any help will greatly appreciated. Thanks!

Basically you need to place the file's contents on a non-printing layer. Try this:
Create a new blank file and open the Layers panel on the left.
Click the Options button and select Import As Layer.
Select your pre-existing PDF file (maybe save a copy of it without the form fields first and use that version).
Right-click the layer you created and select Properties. Change the layer's Print option to "Never Prints".
Now copy the fields from the other file and place them in their correct location on the page.
Save the file and you have a file that can be used to print only the form fields data, even in Reader.
This process can be automated, by the way, but that would require a script.

Income tax dedcution is not taking place on medical reimbursement .

Hi SAP-HR Experts .
I am facing a issue that for few employees Medical Exemption for incomeTax is not taking place for few employees ,
like upto Rs. 15000/- amount annually are exempted for Income Tax .
a employee whose exemption is taking place /3m1 wage type generated , while for those employees for which exempted for Income Tax in not taking place /3m1 is not generating .
IT-589 is maintained , and having amount 2MER(Medical reimbursement wage type) .
IT-267 is also having entry for Off-cycle Payment .
Emp X , having IT-589 , 2MER : 16,200 , for the duration of 01.04.2008 to 31.03.2009
for the month of May-2008 , He claims Rs. 1395.00 .
He has both wage types 2MER = 1395.00 and /3m1 = 1395.00 .
Employee X is correct case .
Emp Y : is wrong case where tax exemption is not taking place .
having IT-589 , 2MER : 30,600.00 , for the duration of 01.04.2008 to 31.03.2009
for the month of May-2008 , He claims Rs. 2086.00 .
He has both wage types 2MER = 2086.00 and /3m1 is not here .
what is required in ordfer to correct this wrong case (Employee - Y) .
Thanks & Regards : rajneesh

Hi Sikinder.
I have checked the Log of payroll both Correct case 'Emp-X' and wrong case 'Emp-Y'
Both emps are of same department and same location .
incase of Emp-X , Payroll-function INMED generates /3m1 wage type
while in case of EMP-Y it is not generating .
Why this is happening and how to correct it ?????.
Regards : rajneesh

Command link / button action is not taking place if i use it in iterator.

Hi,
I am new to ADF, i am facing 1 issue while implementing ADF mobile browser application.
Issue: command link / button action is not taking place if i use it in iterator. its just refreshing the page it self and displaying as no records.
Scenario is i am populating the search results in results page from search page using iterator, i want to get the complete details in different page (results page -> details page) .
I have tried in different ways.like
case1:
<tr:panelGroupLayout id="pgl2" layout="vertical" styleClass="af_m_panelBase">
<tr:panelHeader text="#{classviewBundle.SEARCH_RESULTS}" id="ph1"/>
<tr:iterator id="i1" value="#{bindings.SubjectVO1.collectionModel}" var="subject"
varStatus="subIndx" rows="100">
<tr:panelBox text="#{subject.Subject} #{subject.CatalogNbr} - #{subject.CourseTitleLong}"
styleClass="af_m_listingPrimaryDetails" id="pb1">
<f:facet name="toolbar"/>
<tr:table var="ssrClass" rowBandingInterval="1" id="t1" value="#{subject.children}"
varStatus="clsIndx" rowSelection="none"
binding="#{SessionBean.subjectTable}" verticalGridVisible="true"
emptyText="No Records" width="100%">
<tr:column id="c9" sortable="false" styleClass="width:100%">
<*tr:commandLink text="Section: #{ssrClass.ClassSection}-#{ssrClass.SsrComponentLovDescr} (#{ssrClass.ClassNbr})"*
id="commandLink2" styleClass="af_m_listingLink"
*action="#{pageFlowScope.BackingBean.searchaction}"></tr:commandLink>*
//remaining code
in this case commandlink action is not able to invoke serachaction() method
case 2:
<tr:commandLink text="Section: #{ssrClass.ClassSection}-#{ssrClass.SsrComponentLovDescr} (#{ssrClass.ClassNbr})"
id="commandLink2" styleClass="af_m_listingLink"
action="classdetails}"></tr:commandLink>
in this case its not able to navigate to classdetails page.
I gave correct navigation cases and rules in taskflow,but its working fine when the command link is out of iterator only.
i tried with actionlistener too.. but no use.. please help me out of this problem .
*Update to issue:*
The actual issue is when i use command link/button in an table/iterator whose parent tag is another iterator then the action is not taking place.
the structer of my code is
< iterator1>
#command link action1
< iterator2>
#command link action2
</ iterator2>
< /iterator1>
#command link action1 is working but "#command link action2" is not...
Thanks
Shyam
Edited by: shyam on Dec 26, 2011 5:40 PM

Hi,
To solve my problem I used a af:foreach instead.
<af:forEach items="#{viewScope.DataBySubjectServiceBean.toArray}" var="text">
<af:commandLink text="#{text.IndTextEn}" action="indicator-selected" id="cl1">
<af:setActionListener from="#{text.IndCode}" to="#{pageFlowScope.IndicatorCodeParam}" />
</af:commandLink>
</af:forEach>
By the way you need to convert the iterator to an Array using a ManagedBean.
public Object[] toArray() {
CollectionModel cm = (CollectionModel) getEL("#{bindings.TView1.collectionModel}");
indicators = new Object[cm.getRowCount()];
for(int i=0;i<cm.getRowCount();i++){
indicators[i] = cm.getRowData(i);
return indicators;
public static Object getEL(String expr) {
FacesContext fc = FacesContext.getCurrentInstance();
return fc.getApplication().evaluateExpressionGet(fc,expr,Object.class);
Hope that helps-
Edited by: JuJuZ on Jan 3, 2012 12:23 AM
Add getEL Method

Auto Goods Issue not taking place

Hii All
I hv Maintained backflush indictor in work center and in MRP2 view it is maintained as Workcenter
decides whether to backfluch .
But the auto goods issue is not taking place when the production order is saved and confirmed.
The stock remains the same ..
Can anybody tell the reason for that
Regds
Rakesh

Hi Rakesh,
what is the control key u have maintained in Routing?
if u r using Control key PP01 - Routing/Ref. op. set - internal proc., then after Production Order confirmation u have to do MB31- Goods Receipt for Order, with movement type 101.
If u r using PP03 Routing - in-house prod. auto. goods rct, then it accepts only single operation in a Routing (or) if u r having say more than one operations in a routing, then u have to give PP03 control key for the last operation.
I think u got it...
revert back if u have doubts.
Thanks & Regards,
Santosh

Goods release is not taking place

Dear Friends,
i am getting error while releasing goods from plan order to production order.
my case is as follows
while converting pl.order to production order, goods movement is not taking place.even though when we save the entries, production order is saved with the order number.then i go for goods receipt MB31,"goods is not released" message is displaying.
In the production order system is giving error message
Business transaction can not be carriedout.
system status WERC IS ACTIVE (ACT 600026850010)
Diagnosis :
Object Act 60002685 0010 has system status WCRE (work centre until release).According to this status transaction release opration is not allowed.
Procedure:
you can only carryout the requested function if this is allowed according to the status of object.
can anybody help on this.i think some configuration is required between plant and business area.
please guide me!

Hi Krish,
There is a problem with the tasklist type usage used in work center.
Check in Basic data of the work center "usage". You can see the defination of that in customizing transaction "OP45". In your case the tasklist type is set for "Until release" (check box), this means that this work centre will give error if used in order at the time of "Releasing" the order.
Resolution:
Use a proper task list usage in the work center or change the existing one by removing the check box activation for "Until release".
Regards,
Prasobh
Award your points if this was helpful...

My printer is not taking hold between two print ? What Do i do ?

Hello Sir ,
I have Hp Laserjet 4200n Printer.Operating System installed is Windows XP,But this printer is not taking hold between two print ? What Do i do ?
Regards
Vishal Bhadle
09922222700
[email protected]

It depends on exactly what printer you have. For example, if you have an old Epson printer that is not AirPrint compatible, there is an iPad app called Epson iPrint that will allow you to print from certain selected programs (e.g., Safari, photos).

Target Value check not taking place

Hey Gurus,
In the MIC i have maintained the target value as 8. Now i have created an inspection plan and assigned this MIC to it. The inspection lot is getting generated at the time of GR, I am going to QA32 and recording the result for the lot generated. But when i am giving a value of 6 for that particular MIC, it is accepting it and no rejection is taking place. Can anyone tell me why this is happening and is there any config missing?
Regards,
Abhishek

Hi
For the Rejection/Acceptance system will check the Specifications limits of the MIC not the target value. So maintain the Lower and Upper Specs for the MIC in QS23 and Chk in QA32. The values out of the Lower or Upper Specs will be the Rejections.
Regards
Brahmaji

Delta upload not taking place properly

Hello Everyone,
I am trying to load data from R/3 to BW.
My data target is ODS.
For the first infopkg i m doing "initialize delta update".
Now i am making changes in particular field in R/3-say i am changing the name of the proj from ABC TO XYZ.
Now I m scheduling delta infopkg.But its not displaying the change. i hv even added new record in R/3 side and then tried wid delta infopkg but its still not taking the update.
I have defined Generic delta for my datasrc.delta specific field is "PROJID" and under settings i have checked "New status for changed records".
plz help.

Hi,
The SAP help on this DS recommends these steps
When you extract the documents for the first time, select the complete posting period.
SAP recommend that you carry out initialization and full upload in a number of steps in order to create smaller packages. To improve the performance, select an update via the PSA. The data is extracted in accordance with the selection criteria. In this case, the posting date of the documents is used as the selection criteria.
Initialize all future posting dates, even if the enhanced selection area does not yet contain any documents. The new documents are automatically entered by delta processing.
Carry out delta processing at regular intervals. We recommend that large utility companies carry out delta processing on a daily basis. Only documents with closed reconciliation keys can be processed.
Refer
http://help.sap.com/saphelp_nw70/helpdata/EN/87/c299397f3d11d5b3430050dadf08a4/frameset.htm
Hope this helps.
Thanks,
JituK

Disposition action not taking place

In URM, I have a trigger based on a Termination date field (custom meta data field) and when the document is being checked in and I am viewing the Life cycle; the correct disposition actions are being reflected in the details but when going to the records, approvals, pending disposition, the document is not coming.
I looked at the meta data field in the information fields and it is existing ; I looked at the advanced search design in the field info and the field exists and is tied to the correct caption.
The only thing I notice that in the life cycle, the computed date does not seem to have any value. Is it possible that the termination date is not able to get any value in the form (front end user interface).
How can I troubleshoot it further i.e where can I see that the value of termination date is actually being captured?
Could someone please give me some pointers - it would be much appreciated.
Thank you so much.

I'm sorry, but I'm not even sure what your latest response meant. So let me go about this in the way this should work.
You should have a trigger defined that uses the field "Termination Date" as the activation field. Let's call this trigger "Termination".
You should have a retention category whose disposition instruction set includes an action that says "After Termination, do something". Let's call this category HR, with a category id of "HR-100".
On the content item in question, there should be a category ID value of "HR-100", and a value in the field "Termination Date". Once the item is checked in, or an item is updated, clicking the "Lifecycle Preview" button should show a computed date. (You cannot fill out a new checkin form, and simply preview the lifecycle without actually submitting the form. In earlier versions you could.)
If you do not see a computed date after this, then you've got something in one of the three previous bullets wrong.

Unicode conversion progress - Language conversion not taking place

Hi all,
I have an issue regarding database translation in standard and customised programs. when i log on in chinese and execute sap standard reports eg form pp tcode is cs11 ( exclude basis reports ) i found that the descriptions were missing and the unit column appears as asterix(). Regarding my Z programms the description appears in english and the unit column appears as asterix().
Regarding the case of basis reports it displays chinese characters. Regarding the description, displays blank and UOM asterix(*)
I have the document for transaction se63. If any guidelines regarding sapscripts conversion would really helpful.
The procedure i am following is check for extended errors ( SLIN ) and for code inspector. Is there any thing else i am supposed to take care. please advice me regarding the gameplan to attack.
Regarding Translation, i found SE63 of much use. I understand from the documentation is that every translation ends with generation of xml. regarding the export how to do and mass translation of short, long and other texts otr text how to do?
There is another one more simple question. In abap source code, in case stmts i found exit statements after the message of stop type. the code inspector throws error message as unreachable code. how to handle this shall i can remove exit.
The hard coded strings how to handle? for example in case statement based on selection the constant string eg "one" is assigned to one variable. now in code inspector check it clearly throws an error check that the hardcoded variables cannot be translated what should i do?

Hi Shweta !
I'm facing same issue as you posted here.
Any feedback ? Have you been able to solve it ??
Regards,
SJR

Adjustments not taking full effect

Hello,
I am editing a photograph in Photoshop CC 64bit and when I try to use adjustments such as Brightness/Contrast, Levels, Curves or Exposure etc, the adjustment does not seem to take effect to the extent that I am shown in the preview. So for example, I want to increase the brightness using the Brightness/Contrast sliders, I have the Preview button ticked so I can preview the effect and when I set it how I want it to look and click OK, the photo changes, but not to the extent that the preview is showing me. So the photograph is getting brighter, but not as bright as I can see when I'm previewing my adjustment. This happens on more than just the Brightness/Contrast adjustment. So far, I've had this problem with Brightness/Contrast, Levels, Curves and Exposure.
This only seems to happen when I am editing NEF files in Photoshop. I've edited JPGs and they work fine. Another thing I have noticed, and this might just be coincidence, but when I am editing a NEF in Photoshop that has not been adjusted in Camera Raw (ie the sliders in Camera Raw have just been left at 0), I don't seem to have this problem, only when my NEF has first been edited in Camera Raw, then opened in Photoshop.
Has anyone else had this problem? If anyone can advise on how to stop this from happening I'd greatly appreciate it!
I am using Photoshop CC Ver 14.2.1 x64. I am using a PC running Windows 7 Pro x64, with 8GB RAM and Intel i3 CPU 3.40GHz.
Thanks in advance for any help.

Thanks for your response c.pfaffenbichler,
I have attached some screenshots.
Before Adjustment.jpg is the photograph in Photoshop before I have applied an adjustment.
Preview Adjustment.jpg is the photograph as seen when I am previewing an adjustment (I have increased brightness quite a lot here in order to emphasise the problem).
After Adjustment.jpg is the photograph after the adjustment has been applied.
I have tried making an adjustment when viewed at 100% and this looks like it works fine.
Is this something you have come across before then?

Data extraction is not taking place from BW to R/3

Hi Experts,
We recently upgraded our BW 3.1 system to NW2004s/BI (BW 700). Now we are
not able to extract data from R/3 4.6C source system.
We checked and data extraction job is not getting triggered in R/3. It is
not receving Idoc.All the settings are correct in WE20 and WE21. I will appreciate your quick help.I am not sure if the question has been posted in correct forum or not as I am a newbee in SDN forum. If its not there in the correct forum,please let me know.
Many Thanks

hi Arun,
Thanks for your quick reply. and also I have made the mistakein the post subject . It is from R/3 to BW. But I checked all the ALE setings and RFC connection. Everyhthing is alright.but dont know why its not getting extracted. I think some problem might be lying with the function module. If you have any other idea apart from RFC/Delta please let me know. I am damn sure this isnot an issue with ALE config.
Just to make this issue little bit clear, the exact issue now I am facing is related to Idocs. Idocs are going to the state 56 in R/3 and all the control records are blank in R/3. This has created a nightmare. All the efforts are going in vain...
Many Thanks,
Chinmaya
Message was edited by:
Chinmaya Dash

LO delta for z fields not taking place

Hi All,
We have a problem with th one of our LO DS. We have recently added some Z feilds but then if any change is made then
1. Delta doesnot bring these changes
2. Full load brings these changes.
Now since thise has gone into production , and lakhs of data are mis matching since the changes have not been ca[ptured.
Any idea to resolve it .
Also suggest if any workaround possible
Regards,
Dola
Edited by: sushmita das on Mar 31, 2011 12:36 PM

First of all, what is the Datasource that you have enhanced?
And what is the CMOD Enhancement Function Exit that you are using?
As pointed out, the Delta might not be triggering for the Z fields (whenever you change it).
As far as the work around in concerned, i guess you're 1st level staging is a DSO (maybe Write-Optimized).
You need to write a program to update this DSO.
If you have any other DSO's being updated for the required Z fields, you can make use of that.
Otherwise, you'll have to write an Extract program in R/3 for the required fields (including the Key Fields in DSO) and then update the DSO with this.
Then update the 2nd level DSO (Standard), if any, or directly the Cube.
I am doing the same right now as we had an issue with 2LIS_02_SCL and the Delta was not triggered due to an issue with the CMOD code.

Translations not taking place effect in print forms

Similar Messages

Maybe you are looking for