Transmission does not keep its configuration after restart
Hi everyone,
I have a problem coming up with gnome's last upgrade.
Since Gnome 3.8 then, transmission 2.77 will not keep its configuration. I've already tried to erase the ~/.config/transmission folder in order to start transmission with a "clean" configuration but its not working.
Does anyone have the same problem ? And more importantly, does anyone have a solution yet ?
Thanks
chord wrote:
Common solution for configs rewriting prevent :
chattr +i <your-config-file-name>
It blocks any changes on locked file.
If you need to rewrite/edit file, just unlock it with chattr -i, write changes and lock it again.
I don't think that's a good idea, there is probably a valid reason a config file is being overwritten, your solution would disable the actual application from changing its own config file...
I had a similar problem with the transmission daemon,
Basically this is what I have deducted:
Start transmission
It reads config file
Stop transmission
It re-writes the config file with what it first read when it started plus applying changes you may have made via a GUI.
Basically as I said earlier, if you edit transmissions config file while it is running with vim or nano or whatever, those changes will be over written when transmission stops.
The solution is to either change settings from the GUI, or make sure there is no transmission running, then edit the config file and save it. Everything should then work so long as you haven't made a syntax error when editing the config file.
Last edited by jrussell (2013-06-03 22:15:35)
Similar Messages
-
Scroll bar does not retain its position after or before pack
Hi
My Scroll bar does not retain its position after pack in my application.
But i need to retain its state.
My code snippet is :
System.out.println("VAlue--->" + getHXValue());
scrollPane.getHorizontalScrollBar().setValue(getHXValue());
pack();
My VAlue printed is 100.
But my positon of scroll bar is at 0 th location.
Can any one help me.....Swing related questions should be posted in the Swing forum.
My code snippet is :Snippets don't help.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting. -
Azure VM does not connect via RDP after restart
I have restarted my VM running Windows Server 2012 from Windows Azure Portal. After restart it is unable to connect via RDP, although I can connect to it via FTP I had created already. I have ticketed the issue at Windows Azure Support but no reply in past
2 hours.
Any help please?Hi,
What is the error message you are getting ?
Please check this
document that might help which talks about How to troubleshoot common RDP issues for Windows Virtual Machines in Azure .
Regards,
Shirisha Paderu -
Windows Does Not Remember Screen Resolution after restart
Hi Everyone,
I have a strange problem with Windows 8.1 Pro
My screen resolution resets to 800 x 600 everytime i restart my PC, and I will have to set my resolution again everytime I start my PC.
Any idea?
Cheers
NelsonHi Nelson,
Please check the display adapters on Device Manager.
It may be caused by your graphics driver.
I suggest you reinstall the latest graphics driver to check the result.
Regards,
Kelvin hsu
TechNet Community Support -
Java bytecode operation 'invokevirtual' does not keep consistency
I have following codes.
public class Parent {
@Override
public int hashCode() {
return 0;
public class Child extends Parent {
public void test() {
this.toString();
this.hashCode();
As you see in the above codes, Child inherits toString() from Object and hashCode() from Parent. Bytecode operation of Child#test is as following.
ALOAD 0: this
INVOKEVIRTUAL Object.toString() : String
ALOAD 0: this
INVOKEVIRTUAL Child.hashCode() : int
RETURN
I think if invokevirtual calls Object.toString(), it should call Parent.hashCode() for consistency. or, Child.hashCode() called, then Child.toString() should be called.
However, invokevirtual does not keep its consistency if and only if target method is inherited by Object.
Only that case, invokevirtual calls method in the Object. For other cases, invokevirtual calls method in current class.
I want to know why this happens.I think if invokevirtual calls Object.toString(), it should call Parent.hashCode() for consistencyExcept that it doesn't exist.
You can't seriously be suggesting that this doesn't work correctly. -
FontBook does not keep settings after computer restart
I have thousands of fonts on my HD folder, and a standards set of System and Library fonts. Any time I disactivate and acivate certain font families, my FontBook keeps these settings (for activation and disactivation) ONLY UNTILL next computer restart cycle.
After restart, when I load my FontBook application to check my fonts settings (for to make the fonts I set previously working again), Fontbook starts activating all my thousands fonts in my custom library, taking munites of waiting for a spinning wheel. I also do not see (off) signs for fonts diactivated during previous session. I see lots of duplicate font warning because Font Book is auto-activate all.
Consiquently, I have to reppeat all the process of activation/disactivation and to help my computer working with less fonts load and resolve duplicates.
So, why Font Book does not keep setting for fonts activation/disactivation in a custom library after computer restart?"*Opened Firefox, which was recently updated to some 3.6 something version. *When opened, it offered to download new vers. 4,* which I initiated. "
Impossible! FF v4 system requirements are Leopard & Snow Leopard. Your system info confirms that you are still running an outdated version Tiger - Mac Book Pro *Mac OS X (10.4.5)*
If that information is incorrect, please correct & provide your current OS in the "My Settings" panel.----->
"(what looked strange that the request was in English, German and some other 2 languages"
What you experienced was a kernel panic. Disconnect all devices from your computer and try the suggestions mentioned in the following:
http://docs.info.apple.com/article.html?artnum=106805 *Mac OS X: "Broken folder" icon, prohibitory sign, or +_kernel panic_+ when computer starts*
User Tips: Kernel Panics -
How do I create (or delete) a new tag for a website, so that its tag appears (or does not appear) every time I restart Firefox?
See this - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page
-
After updating to Yosemite ITunes update does not keep me logged in
After updating to Yosemite ITunes update does not keep me logged in all the time. What happen to staying logged in when I decide to logout? Anyone know were to find info on being g able to turn this feature on or off? Thank you all who reply I use my ITunes all the time and hate it to put password in all the time is so frustrating to me.
Thank youWeb sites usually remember you by using a cookie, either a traditional browser cookie or a Flash cookie. If you have set Firefox up to clear your history when you shut down, you may be deleting the site's cookie(s), thus making you anonymous upon your return.
The subject of cookies can trigger strong feelings, so you have a lot of options for how to handle cookies, including built-in choices, add-ons, etc. Rather than write out a very complicated set of options, could you I refer you to an article here:
* [[Cookies - Information that websites store on your computer]]
If you have a specific idea for how you want Firefox to handle cookies, but you're not finding enough help around here, please post back on your objectives so we can help you implement it. -
I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
== Operating system ==
windows XPIf you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]
-
i use macbook pro mid 2012, OS X mavericks. my safari does not keep my history desp[ite all the adjustments made to the settings at safari preferences. my browsing history are cleared whenever i exit safari. i dont know why. i want to try and re - in stall it . the safari is version 7.0.1. but i dont know how.
If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Why the iphone4 during a call does not keep the 3G?
why the iphone4 during a call does not keep the 3G?
I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!Oniplay wrote:
I tried to restart, the problem still remains.
Make sure you do a reset, not a restart. Press and hold both buttons, ignore the "slide to turn off" message and let go of the buttons after the Apple logo shows up on the screen.
If you did that and it did not bring any change, try to set it up as new device, as explained in this article:
How to back up your data and set up as a new device
If it does not work the first time, try not to use the backup afterwards in a second attempt, in case it contains corrupt data.
If still no luck, get it serviced:
Apple - Support - Service Answer Center -
About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased.
I had to restore through my iTunes but then I could not load my music back on.
I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
Of course, my 1 Year Warranty was up about a week before the first incident.....
I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
Does anyone know what is going on with this thing??? I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this!
Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
Thanks.When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day! -
when i plug my iphone4s for charging it does not charge, i have to restart it in order to start charging?
Did the Firefox installation finish without problems?
You can check:
*http://kb.mozillazine.org/Browser_will_not_start_up
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Hello,
When attempting to verify my ios app using codesign it fails:
macmini:MyApp admin$ codesign -vvvv Payload/MyApp.app
Payload/MyApp.app: valid on disk
Payload/MyApp.app: does not satisfy its designated Requirement
I tried to diagnose it, so I ran this command that as far as I know shows what the requirements are:
macmini:MyApp admin$ codesign -d -r- Payload/MyApp.app Executable=/Volumes/Share/Temp/appstore/MyApp.3.12.2.0/Payload/MyApp.app/MyApp designated => identifier "com.bla1.bla2" and certificate root = H"40characterstring"
But I'm not sure how to proceed now. The identifier looks correct and not sure what to do with that 40 character string for the certificate root. Any ideas?
Thanks in advance!Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps. -
My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.
Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US
Maybe you are looking for
-
Adobe Photoshop Elements 8.0 Has Stopped Working
I am running PSE 8.0 on my Windows 7 pc. I installed it about two weeks ago and it ran fine. As of early this week after launching, I get to the opening screeen where I can Organize or Edit (or go to the the advertisements or tour). If I start the to
-
Additional info. This computer is a computer handed out to us from school that we use throughout highschool. We are allowed to sync our itunes accounts so theres no problem there.
-
How many tables can i create in Oracle 10g ?
hi every body ! how many tables can create in oracle 10g ? thank you !
-
what is the address of the FPOE relay ? My mail gateway server is currently pointing to mail.global.frontbridge.com.
-
Media player doesn't support other languages?
Hi guys, I need some help here. I have the latest software rom installed on my 8330 curve (TELUS). I alos installed Japanese and Chinese font libraries. I can read Chinese in email/SMS without problems. But the BB media player can't show Chinese word