Transmitting start/stop/play messages to external instruments
How do I get Logic to transmit start/stop/play messages to my external Roland groovebox?
I've tried ticking the "Transmit MMC" in the Synchronization settings but it doesn't seem to work.
Basically what I'm trying to achieve is when I hit play on the Logic transport, the pattern in the groovebox starts.
Cheers for the help
Im totally a newbie, but I had issues controlling my Boss DR-880 and had success enabling the Sychronization -> Midi -> Destination 1 checkbox. The dropdown is set to all.
It doesn't seem to matter whether Transmit MTC is checked or not.
Hope this helps.
Similar Messages
-
My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.
Have a look in System Preferences -> Sound -> Output.
Plug the speakers out. Do you now see "Internal Speaker" as the name from the Built-in device? If you replug your speakers, is it now changing to "Headphone? -
When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??
You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable. -
Movie just stops playing, shortly after starting it.
We started watching a Netflix movie, got 15-30 seconds into it and it just stops. It goes back to the menu screen every time - no error message though. It did it over and over, so we tried a different movie. It did the same thing, but it waited until we were about 2-3 minutes into the movie. What's going on?
I'm not sure I know what you mean when you say you did a network test and it stayed connected.
On the matter of signal strength, it is possible to have good signal strength but still experience interference.
If you play a movie from your iTunes library, start it and pause for 20 minutes or so, how much of the movie has downloaded, if you then start it playing do you experience the same problem. -
Start/Stop Channels Externally
Hi,
I have been looking at the blog /people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping to see how this is done. I can see from the blog that a PI interface has been developed.
I have ran the URL in a browser and get a 'Website cannot be displayed' error. I do not know what the cause of this is, whether the browser cannot parse the response, or the webservice is not called correctly. Could this problem be occuring if I do not have the relevant auth.
Is it possible to execute the URL directly from ABAP. Has anyone been able to do it. I presume this webservice does not have to be calledd via PI.
Is there a blog or anything other document which describes how this interface (with dynamic URL recevier) is configured in PI. I have searched and cannot find anything.
Any help is greatly appreciated.Hi,
If your requirement is to Start/ Stop XI channels externally, do the following:
1. Select the specific channel in communication channel monitoring.
2. Select External Control On for this channel.
3. Use the following URL for accessing the channel based on what operation you need to perform:
a) START: http://<host>:<port>/AdapterFramework/ChannelAdminServlet?party=<Party Name>&service=<Service Name>&channel=<Channel Name>&action=start
b) STOP: http://<host>:<port>/AdapterFramework/ChannelAdminServlet?party=<Party Name>&service=<Service Name>&channel=<Channel Name>&action=stop
c) STATUS: http://<host>:<port>/AdapterFramework/ChannelAdminServlet?party=<Party Name>&service=<Service Name>&channel=<Channel Name>&action=status
(Keep Party Name blank if there is no party involved in the scenario).
If you have a different requirement, I would request you to explain what you are looking for in more detail.
Best Regards,
Pratik -
My iPod shuffle stops playing after a few songs, then it won't start again.
My iPod shuffle will stop playing after a few songs which is very frustrating while out walking. I end up having to shut it off for about a minute or two and then turn it back on. Sometimes it will start playing again, but it will start playing the same songs over again. I can't go forward or go back. When I try to skip a song, all I get is dead air. I took it back to an Apple store and they replaced it free of charge; which I thought was great... that is until the new iPod started doing the exact same thing. I've downloaded songs from the iTunes store as well as songs off of my personal CD's. I've tried deleting all the songs and re-installing them... nothing seems to solve this problem. I know it only costs $50; but if Apple can't get a $50 item to work; why in the world would I want to invest more money in an Apple product? It's a good thing this was a gift.... I'm just not happy with this product and there doesn't seem to be a good explanation for this.
I Just ran into the same issue:
My iPod shuffle 4th gen would just stop playing, and I had to turn it off, wait 10 secs and the turn it back on.
Then it would get stuck at the same place.
I Even exchanged the iPod for a new one since I had just bought it.
re-synced my playlist and same issue!
did a restore as described above - same issue.
Solution in my case:
one of the songs in my playlist seems was "corrupt". Even trying to play the song in iTunes on the PC did not work, kept getting the message "This computer is not authorized ....", even though the computer is authorized.
So somehow that song being on the shuffle crashes it.
After I removed that song from the playlist and synced again, the problem was resolved!
So try to play all the songs that you want to sync to your shuffle on your computer, maybe you have one song that was not downloaded properly or is otherwise corrupt.
- Deleted the song from the local library
- re-downloaded the song from iTunes store
- now it was playing fine on the PC in iTunes
- re-added it to the playlist, re-synced iPod shuffle
all is working fine now, shuffle no longer freezes.
hope that helps someone else.... -
Why does Itunes stop working when I start to play a movie
Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Volume controls don't work in Messages iOS 8. And music stops playing when I open Messages
My volume buttons don't work when I'm in Messages on iOS 8, I can't change the ringer or headphone volume. More annoyingly music stops playing when I open Messages, but I can start it again. Any help on this would be greatly appreciated.
For all of you, the first thing to do when these things happen after an update, is to close all your open apps and reset. This will cure your ills 99.9% of the time:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?
Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0
-
After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.
One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
Itunes on my PC displays an error message " This iphone cant be synced , you dont have enough privilege" everytime I start syncing thiss message shows up and everything stops. So , what to do now? even wifi sync isnt working and not able to sync files onto my iPhone.
Try:
Close iTunes, click the Start button > All Programs > iTunes folder > RIGHT CLICK iTunes Program icon > Select> Run as Administrator. -
Why does Spotify stopped playing when i do something else like browse facebook, go see my messages?
why does Spotify stopped playing whenever i do something else on my phone like browse facebook, or read my phone messages, or open a link to read something? some other music apps like Jango lets you do whatever you want, but it keeps playing ur playlist.. i'm not even gonna mention how pitifully miniscule Spotify's music library is compared to this apps...ooops
Hi. I feel your pain my friend. This is so annoying it makes me want to cancel my "pro" subscription. I think it has to do with other audio from a web page (includes Facebook) overriding Spotify's audio. I have looked all over Spotify to see if there is an override the override setting. I can't find it. Maybe this bumps up this thread so we get some sort of answer. I wouldn't mind it even if we got it's not possible. At least then we'd know. That's the problem with forum posting - you never know if you're going to get an answer pee what kind of answer it may be. As the headline says this forum is not sourced from Spotify. hoibie
-
Help!My Nano will stop playing after a few minutes. I have to push play to get it to start up again. I can not remember the fix.
See here: iPod nano (6th generation): Music stops when display turns off
B-rock -
When I start to play a movie on my ipad, the message cannot find URL appears
When I start to play downloaded videos I get the message 'unable to find URL'
It only seems to be on videos I javen't watched before this problem started.
-
I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work
How are you trying to play them, in the iTunes store or the Music and Videos apps ? Downloaded and synced music and videos should be in the Music and Videos apps, and you can stop content that is only in the cloud from showing in them via Settings > iTunes & App Store > Music and Videos 'off' (under the 'show all' heading).
If you don't have your music and films/TV shows in those two apps then you should be able to download them into those apps via the Purchased tab in the iTunes store app.
Maybe you are looking for
-
Itemization does not match cost component split
Hi, I need your help or could you please shed some light as to how to fix . A new Overhead was created, in order to add expenses to the pricing of the product. For it a variant of different pricing to which is used currently was created, and so for
-
TS3276 I'M unable to send mail with yahoo and gmail accounts. any clues why? any help?
Need help with MacPro mail and sending email currently not functioning.
-
Are there controls for contrast and backlight, or just only brightness. thanks
-
Ask the Experts: Introduction to Cisco Trustsec Solution and Configuration (from Webcast)
This is an opportunity to learn and ask more questions about Cisco Trustsec solution. The Trustsec solution is designed to flatten the network regardless of the access method but still provide fully distributed and differentiated access control no ma
-
Dear all , I have a question here about the joins cardinality in OBIEE. There is join in the fact and dimension table as 1;N .If I have changed this as N;1 will it give nay change in the results . What is the pupose of the cardinality in OBIEE ,how t