Transmitting to more than one airport express from iTunes

Are there any plans to update the system so that iTunes can transmit to more than one AirPort Express or An airport Express and the computer at the same time?

paulcart, Welcome to the discussion area!
For quite some time, the ability to stream iTunes to multiple AirPort Express (AX) has worked.
Are there any plans to update the system so that iTunes can transmit to ... An airport Express and the computer at the same time?
We are all users like yourself and therefore have no special knowledge of upcoming changes. As you know from reading the "Help & Terms of Use" for this area, speculation on future Apple products or services is not allowed.

Similar Messages

Can i use more than one airport express to extend the airport extreme?

my house is too big, and i use one airport express to extend my network,but the other half of the house doesnt get access to the internet.The question is can i use another airport express, without any complications?

Yes, up to 255 if I remember correctly. But before you do that take a look at the products offered by QuickerTek to amplify the output power of a router and/or add gain antennae to help increase the router's range without the need for adding access points.

Can I use more than one AirPort Express to deal with access problems on my system?

my house unfortunately has wall-boards which have a layer of tin foil on them, which is great when you are looking for cheaper heating bills, but is absolutely awful when trying to install Wi-Fi!

Yes you can, you could either run cat 5 cable to each one and have them as seperate wii networks or do as I do and use the as range extenders.
See http://www.apple.com/uk/airport-express/
Extend an existing Wi-Fi network’s range.
If you already have a wireless network in your home and want to extend its range,AirPort Express can help. Just place it in range of your primary base station — anAirPort Extreme, AirPort Time Capsule or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.

How to use more than one airport express with multiple speakers

I have 2 Airport Express. Prior to the multiple speaker enhansement I changed spekers by changing the wireless network. Each of the Airports is recognised as a wirelss network. Is there any way I can make my computer and itunes to see all of my Airports so I can use the Multiple Speaker function for both of my Airports at the same time withour having to change wireless network.

You need to have a single wireless network.
If you con't have a wireless router, then you will need to configure one of the Airport Express (AX) units to join the existing wireless network of the other AX.

Streaming to more than one Airport

I have installed the update for iTunes (the new version beign 6.02) which advertises as allowing simulatneous streaming to more than one airport express (up to three). When I try to select more than one express station (by holding the shift key while selecting the additional location) I receive a prompt that the location does not support playback as a group. How do I configure the express to support playback as a group.
Many thanks in advance

Try selecting "multiple" from the speaker selection menu, that use the window that pops up to check off the speakers you want. It seems to work here. ( I do hav the latest AEX update.) What's cool is that even the computer speakers stay in sync with the remote speakers; something that Airfoil couldn't do.

Is possible to connect to more than one core WAE from edge?

Hi,
I am trying to find in the documentation, but it is being hard to solve, if it is possible to connect simultaneously to more than one Core-WAE from a Edge-WAE

With the release of 4.1, the concept of core and edge becomes less of a concern. All devices are edge and acceleration is between any edge device.
The WAE is looking for the present of TCP option 21. If found, the WAE knows there is a peer WAE it can accelerate with.
-Dan

More than one IPOD on my ITUNES

Hello, I am a bit dim.
I have a Nano that works fine with my iTunes and is all synched up and that.
It was previously synched to the same computer with an older harddrive that died. Also with this old harddrive we filled my wife's Shuffle. When the harddrive died we got a new one and after some fuss got my Nano working again, but . . .
when my wife wants to be able to add stuff to her Shuffle via my iTunes, when we plug it in it is recognised but the contents come up greyed out and you can't drag anything to it. Neither is there the option in the pane to add things manually. She wants to keep the stuff that's on there on there and add more. Don't want to use Autofill (the only option currently on offer) as we have divergent tastes and she won't like what her stuff gets replaced with at all.
I know that I need to link the Shuffle to my iTunes but I don't know (or remember, I think I once knew) how to do that without erasing everything on there. Surely it's possible to have more than one 'pod running from the same iTunes account . . . .
Can anyone help?

Sorry, but an iPod Shuffle can only be synchronized to one computer at a time. It's not like other iPod models where there's a "manual sync" mode that allows you to connect to multiple copies of iTunes. If you connect an iPod Shuffle to another computer and sync, all the previous content on the Shuffle will be erased.

HT1473 how can I download an more than one audio cd to itunes, scramble all and then transfer all back to a R/W cd?

how can I download an more than one audio cd to itunes, scramble all and then transfer all back to a R/W cd?

Import the CDs to iTunes one at a time, following these instructions.
Once the tracks are in your iTunes library, put them into a playlist, and get them into the order you want. Or if you by "scramble" you mean a randomly shuffled order, use the crossing arrows at the lower left to do so.
When you are ready, insert a blank CD, use the command File > Burn Playlist to Disc, and create an audio CD. I strongly suggest using CD-Rs rather than CD-RWs, since the latter often have trouble in normal CD players.

Trouble playing music on more than one "airport" at the sae time

Now that I havew added a second airport base..I cannot play music in more than one room at the same time...when I try and choose multiple speakers...it states that the particular airport cannot play simultaneously...i have an HP Pavillion, a Mac Book on a Netgear network router....Is there a set up procedure to allow playing music simultaneosly?
Sorry for the run on question..
also is there Apple live telephone support? i cannot seem to find it
Thanks Mike

Are all the Airport Express units using firmware 6.3?
iFelix

How to retrive more than one row value from table

hi,
I had create one table if i entered value in more than one row, the second row override the first row value and while printing it in flat file i am getting the second value entered twice.
i created one context for each column.
    plz provide me a solution..........
       very urgent..........
        Regards,
        Kiruthika

Hi,
Create seperate element for each row and then set values.
for(int i=0;i<4;i++)
IPrivate<view name>.I<node name>Element element = wdContext.node<node name>().create<node name>Element();
wdContext.node<node name>().addElement(element);
element.set<Att>();
to retrive:
int s=wdContext.node<node name>.size();
for(int j=0;j<s;J++){
wdcontext.node<nodename>.getnodeelementAt(j).getAttribute();
Check this link about tables
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/bad3e990-0201-0010-3985-fa0936d901b4
Regards,
Vijayakhanna Raman

How to handle more than one message coming from an async BPEL in a sync BPEL process?

Here is the scenario,
Sync process A is calling an Async process B and Async process B is developed in such a way that it is returning more than one message to sync process A, how you will handle those messages in sync process A?

As durga said, its a wrong design, you will have issues in real time. You wont get the response back most of the time. It can be otherway around, async is waiting for sync process.
Change your design or provide what is your use case below, we can think of which design suits you.
Thanks,
Vijay

Can more than one ipod use an itunes library

Sorry for the newbe qestion but I need some advice for my daughters ipod. I have two libraries on two different computers. how do i set the itunes to manual sync. Can I also sync different ipods, we have several.
thx

*I have two libraries on two different computers. how do i set the itunes to manual sync*
You don't set iTunes to manual, you set the iPod. If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
*Can I also sync different ipods, we have several*
There are a few different ways to use multiple iPods with one computer. However if the iPods are also being used with multiple computers then you'll be using the manual method regardless and not any form of auto-sync. Have a look at this help page for all the suggestions: How to use multiple iPods with one computer

Can I have more than one user account on itunes?

My wife and I currently have a laptop each, and so I have my itunes account through my macbook and my wife has hers through her macbook.
We are looking at getting a Mac Mini, as my wife's macbook is on it's last legs, and we would like to have both itunes accounts on the new Mac to sync our phones/ipod/ipad with. Is this possible? I don't wish to pay for the music my wife buys, and she has no interest in paying for Apps i use etc. Would it be possible to run 2 itunes accounts through 1 itunes on 1 mac?

An iPod touch cannot be synched to more than one computer at a time. You can have content from more than one iTunes Store account, but that content either has to be collected onto a single computer for synching to the iPod, or downloaded directly from the iTunes Store.
Regards.

Don't have more than one backup available on Itunes?

So I use Windows 8 and am having issues with backing up my Iphone 6.
When I go to backup it up on Itunes, the backup I create overrides the old one. Going into "Restore Backup" I can't find any older/additional backups than the most recent one.
Wondering if this is something I've toggled or can fix to allow creation/viewing of more than one older Backup at a time.
Any ideas?
I've looked here but couldn't find a solution: Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
In,
:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
I only have 1 file again, which's title and contents are just random letters and numbers rather than the name of my Iphone.

Indeed, sadly there is no way back to older backups if you haven't created the,. I use the option to prevent devices syncing automatically as I think this presents a risk when you want to fix a problem by restoring only to have the backup automatically updated when you connect the device. I try to run a backup then immediate restore cycle every few months so that should the worst happen I might not lose too much. I also have my library cloned to two different computers each of which have separate backups for my device which gives yet more resilience to a disaster.
tt2

Can you have more than one function fire from creationComplete?

I'd like to have several functions fire when I start a particular application. Is that possible?   Currently I run one function from the creationComplete .
Thanks.

You can also do creationComplete="firstFunction();secondFunction()". If you have more than two function calls or you need to call them all together later on I would do something like an init() function.
creationComplete="init()"
private function init():void
     firstFunction();
     secondFunction();

Transmitting to more than one airport express from iTunes

Similar Messages

Maybe you are looking for