Transormations and DTP got inactive in both DEV and QLTY
Hi,
I have transported transformations,dtp from development to quality,and also loaded data into the DSO.But suddenly I found that both in development and qualitysystem transormation and DTP got inactivated.How it is possible and what is the solution for this
Regards
Lucky
Hi,
Check this forum:
Re: How to check for the last changed date/time for Multiprov, DSO and Tran
Thanks...
Shambhu
Similar Messages
-
I have icloud and just got a new windows pc and all my music on itunes is missing. How do I restore it?
Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance. -
What are smart mailboxes and why do i need both smart and "normal" ones?
What are smart mailboxes and why do I need both smart and "normal" mailboxes?
Hi Kingoftypos,
Thanks for that clarification. So, now it appears that the ultimate purpose of a Smart Mailbox is to point to all emails that meet the criteria in a single place, so if they are spread among several mailboxes, you will be able to see them all together. Here is an article from Apple that describes it:
A Smart Mailbox displays in one location messages that are stored in other mailboxes, so you don’t have to move messages between mailboxes. The messages displayed by a Smart Mailbox are based on criteria you define, and are automatically updated to include new messages that match your criteria. For example, you might create a Smart Mailbox that displays all messages found in all mailboxes from a specific sender.
If you change a message in a Smart Mailbox, such as marking the message as read or unread, or moving or deleting the message, the change is reflected in the mailbox where the message is actually stored.
So, adam, I would think that, if you had mail going to a lot of different places, and wanted to be able to see a particular set of those in a single place, you would use a smart mailbox. Maybe use the rules to direct your mail to different places to start with, but a smart mailbox to bring a set of common ones all together into a single smart mailbox?
Maybe you have Rules move your Amazon mail to an Amazon folder and your Apple mail to an Apple folder, but then you have a Smart Mailbox that contains any mail that has the word "Receipt" in the Subject line?
Just a thought....
Cheers,
GB -
My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?
You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck! -
I bought an app Camera+ and it is installed in both IPhone4S and mini IPad, now I have also one IPhone 5s and this app doesn't look like I have purchased it yet.
If I want to install I have to buy it again. Please, somebody has some advise?
Thank you.Sorry, maybe I didn't express myself well.
I have the same Apple ID in the 3 devices, iPad mini, iPhone 4s and iPhone 5s. In the 2 first the app camera+ is installed, but it is the unique app that doesn't show up in my purchased items in the iPhone 5s. If I want it I have to buy again. I really didn't understand what happened that I can't install it free again.
Thank you. -
I ordered mac OS and I got the email for License and I didnt get the attachement for content code. Please help me getting the content code.
It's a two email process, one email has a locked pdf with the redemption code. The second email has the password to unlock the pdf. They come separetly, so you may have to wait for the 2nd to arrive.
-
Can a single Sun IDM gateway agent be used for both Dev and QA machine
We have three different machines - one for IDM QA, one for IDM DEV and one remote machine where Sun IDM gateway is installed.
If we run the Dev and QA gateway on the same server, we won't be able to test any updates in an isolated environment before rolling out to QA..right?
Is it possible to have a Sun IDM gateway agent instance on the same remote machine? or do we have to install gateway separately on DEV and QA? Any ideas??Hello Manidhar,
You have three different machines -
QA,DEV and IDM Remote gateway.
If we run the Dev and QA gateway on the same server,
we won't be able to test any updates in an isolated
environment before rolling out to QA..right?
you are right. you won't have an isolated environment for testing. it creates interdependancy between DEV/QA environments.
on the other hand, if DEV or QA server goes down, you end up loosing both the enviroments Gateway. it creates a SPF ( Single Point Failure) and it's not a best practice to do so from archicture point of view if you indend to maintain HA ( High Availability) 99.99% up-time.
Is it possible to have a Sun IDM gateway agent
instance on the same remote machine for DEV/QA?
this also creates a SPF situation.
or do we have to
install gateway separately on DEV and QA?
Since you have 3 different machines for 2 +1 Environments,
it is best practice to have
1. Seperate Gateway(s) for each Environment
1. For Dev, 1 For QA
so you have two isolated enviroments for testing, but also gives you the flexibility of keeping the QA Environment closer to Production possible without disturbing Dev
let me know if you have any questions.
Thank you,
Sam
We have three different machines - one for IDM QA,
one for IDM DEV and one remote machine where Sun IDM
gateway is installed.
If we run the Dev and QA gateway on the same server,
we won't be able to test any updates in an isolated
environment before rolling out to QA..right?
Is it possible to have a Sun IDM gateway agent
instance on the same remote machine? or do we have to
install gateway separately on DEV and QA? Any
ideas?? -
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
I have both iPhone and iPad that will not send emails when I am connected via wi if. Have tried three wi if networks. I get a messag that says the sender address (my address) was rejected by the server. Any ideas on what I need to do?
RustyHi and thanks again for trying to help.
Definitely works ok from pc.
Have deleted and re-established account a few times now but still the same.
I have actually given up and added gmail account which is working fine.
Sends and receives no problem.
Bloody bigpond....
We are not remote at all. Sitting in the fantastic Pavilion Hotel in Phnom Penh. Another couple here having trouble but not bigpond. Hotel staff have tried to help but to no avail.
Giving up and stick with gmail until we get home then start trying to get resolution.
Problem actually existed on a personal wi fi network in Melbourne before we left so I should have tried to resolve it then.
Thanks again for suggestions.
R -
I synced my iphone too my laptop and got all my husbands info and lost mine how can I get my info back off this laptop.
hi marie i take you have got your own apple registration, if not you need toregister under your own name & password, if you have then it does sound like you've just plugged it in under your husbands name. lori :-)
-
Hi all,
SQL Server 2012 EE 64 bits (SOURCE)
Oracle 12c 64 bits (DESTINATION)
To make my solution - integrate SQL Server with Oracle - work, i had to install both 32 and 64 bits of the Oracle 12c Client. After that, i had to change the properties of my SSIS package to run on 32 bits only (properties > Debugging >
Run64BitRuntime set to FALSE). Before i made this change, the execution of my package was failing, but after setting Run64BitRuntime to false, the package ran successfully. Why is that?
I am thinking of unistalling the 64 bits ORacle Client from my Windows Server, but i fear that if i uninstall, my package stop working.
Any suggestions/corrections will be most appreciated.
Thanks in advance
OBS1: I am using ODBC as the source and destination tasks.Hi FabrícioPJ,
The 32-bit and 64-bit versions of a provider have the same ID. Therefore, the SSIS runtime will select the appropriate version of the provider to use. 32-bit SSIS Designer always requires and uses the 32-bit version of a provider at design time. However
when running the package in 64-bit mode that the Run64BitRuntime project property is True, it automatically switches to the 64-bit version of the provider. When it couldn’t find 64-bit version of the provider, the package would be failed. For more details,
please see:
http://dougbert.com/blog/post/64-bit-considerations-for-sql-server-integration-services-final.aspx
So in your scenario, it seems that there is not a 64 bit provider for Oracle in your environment, so the issue occurs. Please make sure you have installed the correct 64-bit version of the Oracle provider.
To download Microsoft Connectors v2.0 for Oracle in SSIS 2012, Please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=29283
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I am trying to setup email with Microsodt Exchange but have entered both incoming and outgoing server and never works do you have any advice?o
Your exchange server must be set up to work with ActiveSync. Ask your IT administrator if they have set up your account properly to use this. Without it, you will not be able to access email on your iPad. Do it now.
-
Hello I Got A Little Problem ? And Yeah My Mother Got This At Target Store And Yeah It's A !Tune Carded And It's Costed About $15.00 And Yeah I Go to !Tunes And Downloaded The Coded In And Yeah It Took The Bait And They I Go To My Music That I Whated And Picked It Too Go Too My Downloading Box's And Then It's Telling Me How She's It Book Me By Saiding A Visa Cared , Amercian Carded , And Maybe The Other 2 And but the Last One Saided None? And Still I Can Get My Song's From Here? And I Do Have The Carded? I Really Do Not Understand Why Is This is Happen to Me?
i cant exactly can't understand what you mean to say but if you already have an apple ID which i bet you do. then you can redeem the $15 by clicking on the "redeem" option in the itunes store on mac/pc. the redeem option is loacted under the quick links table.
-
So, I could use help from people who know mre about this than I do. I did a sync last night between iTunes on my Mac (latest version of iTunes) and my iPhone 5 running iOS 7. For some reason, about 90 songs in one of my playlists have disappeared.
The songs are all checked in the playlist in iTunes
The songs were all on the iPhone playlist prior to the sync
I've tried a sync again both by hardwire and wifi
I added a song to the playlist on iTunes and the song appeared in the iPhone playlist, but none of the other 90+ songs came back
I haven't checked my other playlists to see what is there and what isn't (I have lots of music, so this would take days to verify).
I've thought about managing my music manually, but I would have to rebuild everything from scratch on the phone which would take days and I'd never get everything back to the right place.
In as much as I'm otherwise liking iOS 7, the new iTunes app for iOS 7 has been a real pain. This is what's really put me over the edge on it!
If you all have any suggestions that could help, I'd really appreciate it! The playlist I'm referencing most specifically is my most-used playlist and I'd love to have it right.
Thanks!Hi oxman78,
That definitely sounds frustrating! Let's give this a go to see if we can isolate the issue futher:
First, connect your device and choose the "Music" tab. Next, uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to your iPhone).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
Cheers!,
Matt M. -
My IMac turns off unexpectedly in both Mac & Windows mode. I've repaired disc and permissions using the Snow Leopard install disk and cleared the cache without help. Any ideas how to prevent this?
The HAT test detected no problems. Perhaps one of the peripherals, e.g., the backup disk, is causing the problem. I'll try to run the MAC without peripherals for a few days and see what happens, unless you have other suggestions.
Thanks
Maybe you are looking for
-
When I add stuff to my computer google calendar, it syncs with iphone and ipad, but when I add stuff to ipad or iphone, it doesn't sync with the other calendars. How do I fix this?
-
Workitem - Vanishes and capturing sy-ucomm
Hello, I have new to workflow area and have couple of questions. I have browsed through the documentation and could not get clear answers. 1. I am sending a workitem to user, User is supposed to open it and approve/reject. If for user some reason
-
Hi Gurus, I have created a PO and released it.. now when i am doing MIGO.... the systems says the PO has no items... plz guide me whats the reason for this... cheers
-
HT1351 I have the latest iTunes, and I synced my iPod several times, but the music wont transfer!
I have the latest version of iTunes and I have the latest iOS, but the music i download onto iTunes on my computer wont sync into my iPod, even though I tried syncing it several times! Any thought on whats wrong and how to fix it?
-
DV import - audio is out of sync 3 frames
This never happened to me in FCP, so curious as to why audio is out of sync 3 frames... Footage is DV/NTSC 48K/16 bit, (footage is not shot w/this camera but) I am importing with my SONY hdr-hc7 (as usuall). Thanks