Transparent background not staying transparent in dreamweaver

Hello all-
I am having an issue with importing a file with a transparent background into dreamweaver. I created the image with a transparent background, saved for web as a PNG, keeping the transparent background. When I pull the file into dreamweaver, the background of the image turns to yellow. Any ideas what I may or may not be doing?
I created the image in illustrator and pulled to photoshop to manipulate. I'm saving the image for web/devices from photoshop.
Thanks.
Brianne

You should repost in the Dreamweaver forum, this has nothing to do with color management.

Similar Messages

WI-FI does not stay on in the background

At home I only have wi-fi. In the past (prior to iOS7) my devices would stay connected to the internet even after I walked away and they screen went black, this was helpful because I could use find my iPhone to locate my devices in the house. Now however they do not stay connected, and it is impossiable to use find my iPHone to locate either my iPhone or iPad. This is not the same as it dropping wifi- when I am using the device it works like a champ, does not seem to stay connected in the backgroud though. It just renders one of the things I love about the iCulture- that I can find my devices, instantly useless.

I can't say that I have had issues like this with my iPhone or iPod Touch, it has always connected to any Wi-Fi I have tried to connect to!
However, I did find this article online which maybe of some use... http://www.anyiphone.com/2007/06/30/iphone-wifi-tips/

DVD & Blu Ray Burner Drive Trays Do Not Stay Open When Media is in the Drive

I have a problem with both Windows 8/8.1 and the Windows 10 Technical Preview (there is no issue when I run Windows 7).
I have 2 optical drives: 1) DVD Burner and 2) Blu Ray Burner (I just got the second drive a few weeks ago). They are attached to the secondary SATA Chip (see below for specifics).
The problem I'm having is that when I eject media from either drive, the drive does not stay open, but rather immediately closes. Before I got the Blu Ray Burner, I had this problem with just the single DVD Burner by itself. I was hoping when I installed
Windows 10 Technical Preview that this problem would not be present, but it is present in that O/S as well.
This problem will repeat continuously if I attempt to use the eject button and so I either have to grab the disc while the tray is moving, or if I press the eject button again on the drive at the right time, I can get it to re-open and not close (this
is tricky to get the button timing right as it seems like it has to be done close to when the drive tray is fully extended when it starts retracting). It usually takes me 5 to 10 button presses to get it to stay open. Sometimes it will stay open for about
0.5 to 1s before it closes again, but most of the times it just immediately closes. I also have the same problem if I use the software eject feature by right clicking on the drive and choosing eject.
Of course, the expected behavior is that pressing the eject button should open the tray, but not close it immediately allowing you to remove the disc.
Here is some background information about my system and how the drives are connected:
1. Motherboard: Gigabyte GA-EP45-ED3P Revision 1.0 LGA 775
2. Interface (for both drives): Gigabyte SATA II Chip - 2 x SATA 3 GB/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3 GB/s devices
3. Memory: 8 GB (4 x 2 GB)
It should be noted that I tri-boot between Windows 7, 8/8.1, and 10 Technical Preview and that this issue is not present in Windows 7, but has always been there in Windows 8/8.1 and now it is present in 10TP as well.
I've had this system for just over 6 years now and it is still going strong. It should be noted that I have both drives on the secondary SATA chip (as identified above), which is meant to be used with removable SATA devices.
Since the problem exhibits itself in both Windows 8/8.1 and 10TP, a reinstall of the O/S will have no affect on this problem and so this appears to be some other issue that is consistent between Windows 8/8.1 and 10TP.
I'd appreciate your support in looking at this issue - thanks!
Matt Caspermeyer
P.S. I also submitted this feedback through the Insider Program.
Matt

Hey Zagayer,
Thanks for using Apple Support Communities.
As you now have two optical drives in your Mac Pro, you need to be able to choose which drive to eject. That is built into the system. You just hold the Option key while tapping eject for the 2nd drive.
OS X Mountain Lion: Eject a disk
http://support.apple.com/kb/PH10613
If your computer has two optical drives, hold down Option-Media Eject or Option-F12 to eject a disc from the second drive.
Have a nice day,
Mario

Skype For iOS 7 Is Not Staying Online (Connected) ...

As of today, Skype does not stay online/connected and able to receive calls after being minimized for a given period of time.
PROBLEM: I have updated to the latest version of iOS 7 and have the latest version of Skype for my iPhone 4S. While I notices a few improvements I have an even bigger issue now. Skype will not stay onine/connected to the internet and standing by to take phone calls.
It does not take long after minimizing Skype that it goes into some dormant state that either iOS is putting Skype into or Skype itself is simply not working as it should and keeping itself awake. It is not immediate after minimizing Skype but I can say it does not take longer than 10 minutes.
If you have the SOLUTION please post, otherwise keep the restart and reinstall suggestions out.

Registered here to confirm the same or a similar issue here too, as it seems they could be related. If I lock my phone, but allow Skype to continue running in the background, it seems to work perfectly fine for a while. My contacts see me as online, and I can still receive text and incoming call notifications.
However, if I leave it for a while, my contacts see me as offline. From what I understand, if they attempt to call me or message me while I'm appearing in this offline state, they will still be sent to my iPhone and I'll receive them as normal - however it's impossible for my contacts to be able to tell if I'm really there or not since I'm appearing offline.
I'm not sure how long it takes from locking the phone to this issue occuring, but it seems to be perhaps around an hour to two hours. I would just wake up my phone every now and then, but since my contacts are in different time zones and I may be asleep when they wish to call, I can't always simply repeatedly wake the phone up.
If I do manually switch back to the Skype app while it is in this offline state, I notice it will either refresh my contacts list when the app is opened, or it will display the "Signing In" screen briefly before returning to my contacts list - as if the app is going offline or being halted in the background, and when I manually switch back to it, it's being forced to "wake up" again.
Now, my settings already have me set to "Go Offline: Never". I've deleted and reinstalled Skype already. The phone has been reset several times. It looks like something that may need to be looked into further by the Skype team as it seems to be a potential issue - the "Go Offline: Never" preference isn't working as expected under iOS 7.
My device is an iPhone 4S (16GB) running iOS 7.0.3. It's almost always connected to WiFi and Background App Refresh is enabled (whether the last one has any relevance is beyond me, but some app devs have had issues with it so I figured it was worth mentioning in case).

Banner and Web Page (background not static)

THe background does not stay static. you should seee a black map of world with logo bouncing around to each country. I do not know how to upload the zip file to here that has the fla and swf. I do not mind sending the files I just do not know how
please help

You must have all frames out and one black dot in beginning and one on the end of timline and your background will b static.

Blue Light In Center of Router - Not staying connected

Hello - We bought the N Ultra Rangeplus and it's been a nightmare. Have spoke with Tech Support 3 times and all they want to do is charge you $10 to get into your computer instead of tell you what to do over the phone. Have 3 computers - 2 laptops (an XP and Vista) and a desktop (XP). Last night all were fine.
Today the laptop Windows Vista will not stay connected and on the router the mysterious center button now has a blue dash where last night it didn't. Of course they include NO instructions and you can't just type in this question as it asks everything but what you need. Sometimes this button turns orange and the Vista keeps connecting and disconnecting.
What's going on?

The button in the middle of the router is WPS...
Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a wireless network. Traditionally, users would have to manually create a wireless network name (SSID), and then manually entering a creative, yet predictable security key on both the access point and client to prevent unwanted access to their wireless network.
This whole process requires the users to have the background knowledge of the Wi-Fi devices and the ability to make the necessary configuration changes. With WPS, it will automatically configure a wireless network with a network name (SSID) and strong WPA data encryption and authentication. WPS is designed to support various Wi-Fi certified 802.11 products ranging from access points, wireless adapters, Wi-Fi phones...
WPS can be enabled using 2 options:
1. PIN (Personal Identification Number) Method, in which a PIN has to be taken either from a sticker label or from the web interface of the WPS device. This PIN will then be entered in the AP or client WPS device to connect.
2. PBC (Push button configuration) Method, in which the user simply has to push a button, either an actual or a virtual one, on both WPS devices to connect.

Iphone voice memos does not stay open

iphone voice memos does not stay open

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

IPhone 4 does not stay connected to internet over 3G+

I have an iPhone 4 on the telus network running the latest version of the os 4.3.3. My phone will not stay connected to the Internet most of the time. It looses connection and won't reconnect until I turn on airplane mode and then turn it back off. It also looses connection if I have wifi on and it detects a network but choose not to connect to it. I have restored my phone and it fixed the problem for half a day before it started again. I only have a couple months warranty left, is this covered do you think?

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

Iphone 4 does not stay connected to my network

Since upgrading to 6.1, my iPhone 4 does not stay connected to my network. I have to input my password each time I leave my house. My other devices stay connected, so the issue is with the upgrade. Has anyone found a way to keep their IPhone connected to their network? Thanks.

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

Iphone does not stay connected to wi-fi.

When using apps or when in sleep mode my iphone does not stay connected to my wi-fi. All other items within the house have no issues with staying connected to my wi-fi.

By design, when entering sleep mode, the iPhone will disconnect from WiFi to conserve battery. If you want the WiFi connection to remain persistent, plug your phone into a power source.

HT2305 MY IPHONE BATTERY CHARGE DOES NOT STAY

the charge of my iphone does not stay for over 12hrs, what should I do?

hey EmsOne,
try updating the Power Manager to version 3.64 >> http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
and the Power Management Driver to version 1.64 : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
Hopefully this will work for you.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

FRM-10142 The Http Listener (Dos Window Does not Stay Open)

Dear Sir
URGENT
When I start OC4J instance its dos window open for few seconds and after that its closed.
I mean OC4J instance dos window des not staying open at task bar.In oracle 10g forms builder and 11g database
Please guide me how this problem would be solve...?
Yassen

For URGENT questions go right to https://support.oracle.com and file a Prio 1 SR with Oracle Support. For everything else I don't see why your question is more urgent then others.
Did you check if maybe the port OC4J runs on (8889) is already used by another program (netstat)? Did you check the logfiles?
cheers

Cannot save password-screen does not stay open long enough

Cannot log into company intranet or home voice mail. Asks for a password and cannot save it as the save password dialogue box does not stay open long enough to click on it. Works fine on other locations

Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

My note app does not stay open

My note app does not stay open
<Email Edited by Host>

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Transparent background not staying transparent in dreamweaver

Similar Messages

Maybe you are looking for