Transparent Background (Projection)

Hello. I wonder if anyone can help.
I'm to make a flash movie advertising a product. The movie is
to be projected onto a screen. I have a couple of questions
regarding this.
The client requests the movie to be contained in circle. The
movie plays in a circle fine, however the background shows around
the circle. Can this be made transparent so only the circle with
movie in is projected?
What is the best resolution to design for a projected image?
I have chosen 1024 x 768. Does anyone have any suggestions
regarding this?
Many thanks in advance.

If this can be an exe then you best bet is to use something
like
mProjector to build a "windowless" flash application. It
works on
Windows or OS X and all you need to do is convert you swf to
an exe
with mProjector, after that is should "just work"
http://www.screentime.com/software/mprojector/
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

Similar Messages

Publish Project with Transparent Background?

Is there any ways to publish with a Transparent background on your project? I have looked in the Master Slide area and can not find any way to do a transparent background it always wants something there. Let me know if this can not be done. thanks

Too bad too, because many versions ago, we could do it! It required a bit of finagling, but it was possible.

Export project with Transparent Background

I need to export a Motion project with no solid color background and then import the .MOV into FCP to layer on top of preexisting footage. In project properties I have the transparent checked, but it still exports with a black background. Anyone know of a solution for this?

I cannot get a choice to set the background as transparent. I click edit>project properties and then the background color only offers colors, transparent is never a choice. I have set the color to black and then moved the slider and I have exported it on 100% and 0% and I still get the same results. I am exporting as an lossless+alpha and under the options I have selected a quicktime movie as the Kind and Animation as the Compressor. I have tried every possible combination and cannot get the project to export with a transparent background and like I said when I go into project properties there is no option for a transparent background, only colors.

How do I import animated gifs into Premiere with a transparent background?

I have an animated gif that I got from the internet, and I'm trying to import it into Premiere Pro with a transparent background. The gif is of a video game character standing still and blinking. Whenever I import it, it always has a white background, so I need help on how to change that.
I've gone into Photoshop and removed the white background frame by frame, making it transparent. I do this by using the magic wand tool to select the white background, then hit "delete" to turn it into that diamond grid, which means it's transparent. I then select File -> Save for Web. I preview every frame, and it shows that the backgrounds are transparent. I save it as a gif. But when I import it into Premiere Pro, the white background is still there.
I've read many forums online about people trying to import images into Premiere Pro with a transparent background, but none of them have explained how to do it specifically for animated gifs. Every answer has always been "export the image as a png, that'll work", and sure enough, I exported a few frames of the gif as pngs, and those few frames had transparent backgrounds in Premiere Pro. But I don't want a png because those aren't animated sequences, those can only be still images. I need to export it as a gif so that it will remain animated, but gif files always have that dreaded white background in Premiere Pro.
I suppose I could export every frame as a png, import each of those frames into Premiere Pro, then string all the frames together and tweak them so they'll be functionally identical to the animated gif, but that would take forever. I'm making a video project and I need numerous animated gifs to work with, so I don't want to do that with every single one of them. I'm looking for a way to simply import the gifs into Premiere Pro and be done with it. If there is any way to do this, please help me.
-Robert

faind on gif transparency and other cartoon animation problems : Adobe After Effects
" The reason: GIFs don't support alpha channels. Instead, their file structure assigns a certain color value to be read as totally transparent. There aren't any degrees of transparency as you find in graphics formats that do support alpha channels.
To use an animated gif in AE, you'd first have to create the areas of transparency, then convert the series of images into a graphics format that supports alpha channels, and there are a bunch: PICT, TIFF, TARGA or PNG, to name a few."

Using PNG files with transparent background - Please Help

I just purchased Elements to do a very specific task which I can’t do in Aperture. I am a former photoshopper (V.5) and excited to be back.
I am doing a book/scrapbook and the majority of my text will be my own handwriting. I use white paper and black ink and I scan in at the highest settings. My goal is to create my handwriting on a transparent background so I can place it in my book as I choose. For this specific project (which is very large in scope) I wanted to keep my image/file management within Aperture.
So I import my file (of my handwriting) from Aperture and successfully saved with a transparent background. Adobe said I had to save it as a PNG file. I noticed when I saved in Photoshop there was a warning saying I had to save as a copy.
Aperture does not see the file when I try to import it back. My interchange between aperture and photoshop is fine otherwise. This problem only seems to be with “unflattened” layered images. When I flatten the image it is recognized by Aperture, but I lose the transparent background in Photoshop.
If anyone sees flaws here or has a suggestion to “isolate” and save my personal handwriting image files I would greatly appreciate it. Thanks!

Would probably work best if you first export from Aperture as PSD (if possible, like Lightroom) and then save to preserve layers.
From the PSD save as PNG24 rather than PNG8 which is better for preserving transparency.

Trying to import files with transparent backgrounds into Premier Elements 10

I am struggling to import files from Photoshop CS3 into Premier Elements 10 and preserve their transparent background. I have tried .png (8 and 24 bit), .gif and .psd files. I have tried rasterizing the type layer before "Saving for web and devices" but can't get anything to work. The imported files end up as either text on a white background (.gif) or the file imports as a black background with no type visible (.png and .psd). I have read a few forums but can't find any suggestions beyond what I have already tried. I also get the same problem if I "Save for web and devices" out of Illustrator.
Any suggestions much appreciated.
Mick

kaare
You have brought up one very interesting maintaining transparency question which I feel goes more to the trigger on the
Premiere Elements Videomerge pop up than to the Photoshop CS2 Save As with or without a check mark for Maximum Compatibility
And, I find that Photoshop CS5.1 as well as CS2 involvement in this matter is the same.
I created three 720 x 480 pixels documents, each with a blue colored circle on a transparent background in
Photoshop CS2 and saved each
psd with check mark next to Maximize Compatibility
psd with no check mark next to Maximize Compatibility
png
Each of them was imported into a NTSC DV Standard Premiere Elements 11 Windows 7 64 bit project.
Each triggered the Premiere Elements 11 Videomerge pop up.
If I checked No for the program request to apply Videomerge, then all 3 results were the same, that is,
the area around the circle was transparent and the circle was not...just the way it was created in Photoshop CS2.
So, why was the Videomerge message telling me "Clip being dropped contains solid background color" when
it had transparency represented by black and did not have a solid background color?
Even more interesting was what happened if I selected Yes to the program's request to
apply Videomerge to create transparency for what it claimed to be seeing as "solid background color".
The result was the same for all three cases, that is, the inside content of the circle became transparent
and the "black background" became a "solid color".
Videomerge is not one of my preferred Premiere Elements options.
To avoid the Videomerge pop up, I would suggest placing a check mark next to the "Do not show again.",
followed by No in the Videomerge pop up. When you do, you should not be confused by the activities of the
Videomerge pop up activities and you should have no problems with the maintenance of the Photoshop
created transparency in the Premiere Elements project.
ATR

Can't get photo with transparent background to show up that way

I'm quite new to PSE (using ver. 6) so thanks in advance for any help you can offer!
I have a photo, and have made the background transparent, and saved it as a GIF file. When opened, it shows up with the checkered background. Good so far.
When I drag this photo from the Project Bin at the bottom (where I still see the checkerd background) into the image I'm working on, it shows up with a solid gray background once dropped into that image. So in essence, the background is no longer transparent.
How do I add this photo with the transparent background to the image I'm working on without a background / frame showing up? I've combed the internet and can't find an answer, and searching this forum, still coming up empty. I think the problem has to do with dragging it from the project bin. How else can I get it into the image I'm working on?
Thanks!
Kevin

In PSE 6, dragging up from the project bin creates a special kind of passthrough layer. Copy/paste, or drag it down from the gif's image window into the other file in the project bin instead.

How would you do this "star burst" tutorial but have transparent backgrounds when you're finished

I been playing around with this tutorial and have a really fun project to apply it to, but I really need a transparent background so I can use it on a couple different backgrounds. I tried just selecting the backgrounds and snipping them out, but can't figure out how stop the gradient layer at top from filling the entire background. I also tried just flattening it and cutting it out. Really neither of those solution make for anything that look slick. Is there another way to do this tutorial or way to not have a background at the end? I'm using Adobe Photoshop CS4, thanks.
http://www.photoshopessentials.com/photoshop-text/text-effects/light-burst/

csuebele wrote:
Yes, Trevor is correct about the antlines. They are only an average of the selection. There are lots of ways to create burst effects like this. You could smooth out the jagged lines with a slight radial blur. The only problem with it is that you either have to have what you want to blur perfectly centered in you document, or attempt to guess where the center is in the very small dialog box. With the above image, I use the angle gradient tool set to noise. This give a wild multcolored gradient, which I then converted to B&W, adjusted the contrast, put in screen mode, and manually masked the areas I wanted.
Jack you have some great workflow ideas. Using the gradient tool that way was new to me, but what a great tool to have in your virtual Photoshop toolbox. I had to hunt for how to set the Angle gradient to noise, but these two links did the trick for me:
http://www.webdesignerdepot.com/2010/07/exploring-photoshop%E2%80%99s-angle-gradient-tool/
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-77e1a.h tml
(Click on create noise gradients or scroll to the bottom of the screen).

How do i save a .png with transparent background? cannot find in help

how do i save a .png with transparent background? cannot find in help

rickseng
With what program are you working and with what version of the program and on what computer operating system?
I suspect that you are working with some version of Photoshop Elements. If that is correct, then be advised that some how
your thread got posted in the Adobe Premiere Elements Forum (video editing) instead of the Adobe Photoshop Elements Forum (photo editing).
If Photoshop Elements question, then please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator
here to see your thread here and move it from here to there.
Photoshop Elements
Thought....if are creating an image on a transparent background in Photoshop Elements Windows for a Premiere Elements Windows project, then you Save As png or psd.
Please clarify if I have misinterpreted your question.
Thank you.
ATR

Rendering transparent background for website video

I have a comp for a website that I'm doing.
I have a transparent background and some fading in WHITE text with a light ray animated behind it.
I have followed instructions on how to render with the transparency intact (Quicktime, PNG, RGB+Alpha, Millions of Colors+). When I render it out and watch it in Quicktime, the light ray isn't correct and there's no transparency. Same thing with Final Cut Pro.
When I bring the footage back into AE, the transparency is there so I'm assuming that the transparency is there but QT & FC just don't play transparency files.
I need the transparency bc I want the text to reveal over a background picture I have in my webpage design.
Is there anyway to get this done right? I need the file to NOT be 300+ megabytes and when I drag the clip into COMPRESSOR to make it smaller, nothing is showing on the preview screen. I've been doing some research but haven't found anything to make it work correctly.
Can someone help me with this?
In the end, what I'm attempting to do is add the QT video into my iWeb page and have it play. I'm not a coder so I don't know how to make this happen any other way than making a QT movie and then adding it iWeb.
thanks in advance.

The only video format that supports transparency in a web browser is a flash player. That really doesn't fully support transparency either. The QuickTime player or any other video player will never ever support transparency in a web browser. Your project design is flawed from the outset. Another words you cannot do what you are trying to do using QuickTime. You will have to redesign for flash. If you redesign with flash, then you will not have a mobile compatible application.
I don't have much of an explanation of what you are trying to accomplish with your project so I can't give you more pointers than that. Point us to a website that has the features you are trying to implement on your webpage and maybe we can give you some ideas but After Effects is not where you should be looking.

Transparent background - export to iMovie?

I'm pretty new to FCE/LiveType; I've played a bit with creating titles in LifeType with a transparent background and moved them over to FCE. I have an unfinished project in iMovie 06 and was wondering if I could create a LiveType title with a transparent background and import it into iMovie?

I made a 3 second test title (animated), and then went to "render -> movie"; appeared on desktop as test.mov file. Dragged that into iMovie. Did not knowingly convert that to .dv.
I then created another one, simply went to "save" and it appeared as test.ipr on the desktop. Dragged that one into iMovie as well (no conversion there either).
Both played fine, both had black backgrounds. AFAIK, there are no options in iMovie to set/change the default black background color. Maybe iMovie automatically converts to .dv during import? And, as I mentioned, it occurred to me that it simply may not work because I can't "superimpose" it onto an image or clip in iMovie anyway unless I can find a plugin that will let me insert "picture within picture" or similar. It may be that I only have two options:
Either import an image/clip into LiveType, create the text, render as movie and then import into iMovie, or create text, save as .ipr, import into FCE, export and back into iMovie.
Thanks for spending all this time on this, I appreciate it!

Saving image with transparent background for web/Dreamweaver

How do I save a little image, so that the background stays transparent. I already have the image set up in Photoshop with a transparent background and have saved it as gif and png. When I import it into Dreamweaver the background stays white instead of transparent. What am I not doing right, since I read several posts saying that png and gif are the right formats to save in, if you want a transparent background?
Thanks for any help with this,
Anne

Well now that you have told me to save with some sort of an alpha channel, it works perfectly.
In CS5:
Select layer,"Composition,Make movie". Then navigate to "Output module" and choose an option that has "alpha channel" in the title.Choose a name for your project "Output to". I now use "lossless alpha".I don't know if that is the best one, but it seems to be working fine.
There is no "Quicktime" option in CS5 as in older versions of AE.
I was trying to save as a video in general or for photoshop and that just wasn't working out well.
I don't know what the "Frames to Layers import assistant" is that you mentioned though. I still tend to drag and drop, rather then import.
Thanks for your help.

Image with transparent background als foreground of a button

I'd like to build an app with buttons using the phone's accent Color as Background and an Image with transparent Background as foreground of the button. It should look like the tiles on the start screen of WP8.1.
The following code doesn't work (no foreground appears)
<Button x:Name="myButton" Background="{ThemeResource PhoneAccentBrush}">
<Button.Foreground>
<ImageBrush ImageSource="/Assets/myImage.png"/>
<Button.Foreground>
</Button>
Are there any ideas?
Thanks
Martin

Hi mfv_technet,
The Foreground property is used to get or set a brush that describes the foreground color. So we can not bind the Foreground to a image,
if I do not misunderstand you, in my mind if we want to set the button look like the tiles on the start screen of WP8.1, maybe you can try to refer to the following xaml:
<Button x:Name="myButton" Foreground="Red" Background="{ThemeResource PhoneAccentBrush}" Margin="116,136,0,363" Width="195" Height="141">
<Button.Content>
<StackPanel Orientation="Vertical">
<Image Source="/Assets/myImage.png" Width="80" Height="80"></Image>
<TextBlock Text="Button"></TextBlock>
</StackPanel>
</Button.Content>
</Button>
The result:
If I have misunderstood you, please feel free to let me know.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do you make an image have a transparent background?

i brought an image from PS into Illustrator and i want to put it in AE and use the puppet tool. however, when i bring it in it has a white background, but i just what the object i am going to puppet, so how do i do that?

AE does not require an image to be sent through Illy first. Just make sure your image has a transparent background and/or an alpha channel if need, then save as a psd file. In AE bring the psd file in as footage, unless you need a compostion and folder for the psd created in the project list. You should then be able to use the puppet tool on an image with a transparent background.

Using animated gifs with transparent background.

Hi guys,
Keynotes 6.2.
I have been onto apple support with this problem.
I add a transparent animated gif to my project.
It show as a movie correctly in the presentation but when exported as quicktime or HTML the movies fail.
We eventually found out that quicktime does not support animated gifs. ( support.apple.com/kb/ht3775 )
So I exported the animation onto a folder with all the frames separately and brought them into final cut pro.
I then followed these tutorials on how to export with transparent background. ( http://provideocoalition.com/mspencer/video/fcp-x-and-alpha-channels and http://www.larryjordan.biz/fcp-export-transparency ).
I now have a quicktime movie that if I bring back into Final Cut Pro it has a transparent background.
However when I bring into keynotes it still has a black background. (presumably keynotes does not recognise the Apple Prores 444).
Any ideas how I can achieve what I need. ?
I am using a program called crazytalk animator and can output with transparent background. Animated Gif or a series of image stills BMP, JPEG, TGA or PNG.
Cheers
SteveW

This has been an ongoing issue for me since I switched from Powerpoint to Keynote. Most of the animated gifs with transparent backgrounds that I used with Powerpoint are no longer transparent in Keynote. You may want to search for those earlier threads on this topic...
To summarize: I've had to open up my animated gifs in After Effects and use the Color Key effect to restore transparency, with mixed success.
Good luck!

Transparent Background (Projection)

Similar Messages

Maybe you are looking for