Transparent .eps import to FW CS3 - NOT

Can't import transparent .eps art into FW CS3 without
convering to bitmap with white background.
Still works just fine with FW MX.
What gives?

Thanks. That works, but don't understand why you need such a
workaround - IT USED TO WORK JUST FINE IN MX:
1. You can drag/import same .eps files into FW MX, Photoshop
or Illustrator vectors/transparency intact...BUT NOT DW CS3
(niether drag/drop or import).
2. Stangely, however, you CAN open the source Freehand MX
File directly into a new CS3 FW w/vectors/transparency intact...and
drag to working FW/CS3 doc.
OBVIOUS PRETTY POOR UPDATE EXECUTION...FOR ALL THAT MONEY
SHOULDN'T IT BE A LOT LESS SLOPPY?

Similar Messages

Background-color:transparent !important; is not working in IE

Hi,
In my sharepoint site i have used "background-color:transparent !important;" css. It is not working in IE but in Mozilla is working fine.
And I am using IE 11. Please let me know is there any thing wrong in the syntax. If that is the case please provide me correct solution for that.
Any help would be greatly appreciated.
Regards,
Saya

Thank you for your reply.
I have checked given links. Those are not use for this issue.
Actually in my sharepoint site the same code "background-color:transparent
!important;" was working fine before installing sharepoint 2010 service pack 2. After installation we got this issue. And if i change "transparent"
with any color, it is applying that color. Only "transparent"
background css is not working in IE.

DW CS3 not importing entire site cache from DW8

Hi;
I upgraded to the CS3 web premium suite from studio 8. My
site caches were
imported but the log on info for each was not. Is there a fix
for this ?
Thanks;
Pat

I dunno. Go into DW8 and EXPORT the site definitions with
their login info.
Import them into CS3.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pat Jones" <[email protected]> wrote in message
news:f4pkcp$1rb$[email protected]..
> Hi Murray;
>
> DW8 is still there and they're both on the same drive.
Only the log on
> info is missing. A while ago, DW8 was having problems
losing the last used
> site's log on due to IE7 (as I understand the cause). I
downloaded a patch
> for that. Any connection?
>
> Thanks;
>
> Pat
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:f4pjkd$111$[email protected]..
>> The site defs should have migrated forward. Did you
install on the same
>> drive? Did you uninstall DW8 before installing CS3?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Pat Jones" <[email protected]> wrote in
message
>> news:f4pj04$7h$[email protected]..
>>> Hi;
>>>
>>> I upgraded to the CS3 web premium suite from
studio 8. My site caches
>>> were imported but the log on info for each was
not. Is there a fix for
>>> this ?
>>>
>>> Thanks;
>>> Pat
>>>
>>
>
>

Microsoft Word Doc not opening - EPS Import message

Suddenly whenever I try to open a word doc I get the following message: There is not enough memory or disk space to run the converter "EPS Import". What in the world does this mean?? There is still 78 of 148 GB of memory available so clearly not a disk memory space issue. Help! I need to get my documents open!!
Thanks.

Could be many things, but it's best to start with these two steps, which may fix it also...
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc , then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
Safe Boot... holding Shift key down at bootup. Saf

AS CS3 - Setting the EPS Import Settings

I am trying to create an applescript that sets a whole series of preferences in Indesign CS3 so I can quickly and easily synchronize my studio with the same settings.
It had been going well until I was stumped by the EPS Import Settings of which I want to have clipping paths applied and I want to rasterize the postscript for the proxy.
I have tried something like this:
tell the EPS import preference properties
set EPS frames to true
set the EPS proxy to "Rasterise the Postscript"
end tell
Of course I am failing big time somewhere, any help would be greatly appreciated.

On 3/9/08 10:27 AM, "Dylan" <[email protected]> wrote: > set the EPS proxy to "Rasterise the Postscript" The two options for EPS proxy are "always" and "as needed" (without the quotes). -- Shane Stanley <[email protected]>

Can't open EPS files in Illustrator CS3 since installing CS6

I'm on Windows 7, and need to be able to open .eps files with Illustrator CS3. Since installing CS6 yesterday I'm no longer able to associate EPS files with Illustrator CS3. When I right click an eps and go to "open with", only Illustrator CS6 is listed. When I "choose default program", only Illustrator CS6 is listed. If I "browse" and manually select the Illustrator CS3 executable, it still defaults to CS6. Using the same process with .ai files works fine, there is no issue. However these .eps files are not behaving like .ai files. If anyone could suggest a solution to my problem I would be very grateful.
EDIT:
Also, attempting to set the default program through the "set associations" control panel doesn't work, after selecting the Illustator CS3 executable it still shows up as CS6.

Some research solved my issue. Need to create a registry entry for Illustrator CS3 (v13) in the eps file extension section of the windows 7 registry.
1. Navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.eps\OpenWit hProgids
2. Create a new "binary value" key called "Adobe.Illustrator.13" (leave the value blank).
That's it. CS3 is now a valid choice for eps files. Hope this helps anyone who has the same issue.

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

you must also use a browser that allows cookies. try a different browser or download from adobe.com
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

LR2 and importing keywords from CS3 Bridge

I've just started a 30 day LR trial and need some guidance, please, on successfully importing keywords from CS3 Bridge so that the complete heirarchy survives intact.
I've just imported the keywords to LR2 and found the heirarchy is mostly destroyed.
Also, Bridge allows you put a keyword inside "[ ]" (square brackets) if you want/need that word in the heirarchy but do not want it to be copied to the metadata. After importing to LR2, all the square brackets have gone.
I've imported some photos into LR2 but, when I look at their keywords, all the words which were within square brackets (and so not visible in the metadata in Bridge) are now visible in the metadata in LR2.
Anyone found a solution to this, please? I really don't want to have to re-keyword everything if there's another way.
Thanks, John Walmsley

Ginger
I ran a test for you. Started up my old computer that has windows XP OS. Took a photo and added a keyword by right clicking as your previous post outlined. I then looked at photo in Bridge CS3 on old machine. There was no keyword. Copied to flash drive and looked at photo on Vista computer with Bridge CS3. Still no keyword. Ran a search on Vista advanced for keyword on flash drive, and it gave a hit.
So my conclusion is that the keyword is there, but Bridge does not read the XP generated keyword. It will read a keyword generated by same method in Vista. Don't know what else to suggest. Don't have CS4 so do not know it that works or not.
Perhaps with these clues someone else can figure it out.
Good luck

Import a Premiere CS3 Project into Premiere Elements 7.

Is it possible (or NOT) import a Premiere CS3 Project into Premiere Elements 7?
Thanks a lot for any help.

It is only possible to open some PrE Projects into the right version of PrPro, but will not work the other way around. The error message that you will get is "This Project was created in Adobe PrPro and you need to open it in that program."
Even going the PrE to PrPro route is filled with potholes. I can open some PrE 4 Projects in PrPro 2.0, but not all - depends on what was done. Later versions of PrE will not open in PrPro 2.0, but some have opened in CS3 and CS4, though much can keep one from being able to do that.
Sorry for the bad news,
Hunt

Why will CS3 not recognize Pict files?

Why is it that CS3 Photoshop will not open Pict files, even after
going into Image Info and saying open all images like this Pict file in CS3.
. . . . and yet . . . .
I can open the Tiger OS application PREVIEW and open the same Pict file?
I can open any Pict file in Preview and convert to jpg, then CS3 seems to
recognize the image file and open it.
Why will CS3 not recognize Pict files?
John R

TheBlackXacto wrote:
Yes, in: CS3/Application/Plug-ins/Import/Export/Pict Resource.plugins
Oy!
The Mac Paint.plugin has to be in ./Applications/Adobe Photoshop Cs3/plug-Ins/File Formats/Mac Paint.plugin
You need to find the Mac Paint.plugin in the Goodies/Optional Plug_ins/File Formats/… then relaunch Photoshop.

Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

Captivate 5.5 Is it possible to import PPT slides in Notes Page view?

Hello experts,
This may seem like an odd question. I'd like to display all the notes in the page of a PowerPoint deck that provides samples of code and explaintions of what the code is doing. It is too much information for the slide, which just has discussion point bullets, and I think it is too much for the closed caption pane. It this possible to import PPT slides in Notes Page view?
Thank you so much in advance for any hints, tips, and replies.
Kindest regards,
P

I found an alternative but circuitous way of achieving the desired result. In PowerPoint I opened, then I printed the PPT presentationto a PDF selecting the Notes Page option instead of Full Slide. By then using a PDF converter to convert it back to PPT I was able to insert the PPT as is. In other words it "looks" just like the PPT Notes Page view, which is exactly what I wanted. The code snippet and notes were intact.

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

Error importing *.SCA file into NWDS: Import (into source SC) not possible

All,
When attempting to import an SCA into a new project in NWDS, an "Import (into source SC) not possible: SCA doesn't contain DC sources" occurs. Any assistance to fix this issue appreciated.
Thanks,
Lee

You can indeed import SCAs into local development configurations in NWDS (Eclipse). You have to have a pre-existing software component of the same name and vendor which may or may not be empty.
In the Development Infrastructure perspective in NWDS 7.1, just right-click on the software component you want to overwrite with the import and choose "Import".
To import SCAs into a CMS track in the NWDI, you have to go to http://<NWDI server>:5<nn instance no>00/devinf/ and import the SCAs from the transport inbox directory of the NWDI server. Don't forget to maintain the SLD if necessary.
Cheers,
Thorsten

A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

Hi,
After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
and they are there as safe control and trust level is also full.
These webparts work in 2010.
Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
Error importing WebPart. Assembly c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
Adit

Hi Adit,
According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
I recommend to check if all the assemblies are put into the BIN and GAC.
If above cannot work, you can check the troubleshooting steps in the link below:
http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Transparent .eps import to FW CS3 - NOT

Similar Messages

Maybe you are looking for