Transparent gradient in Keynote?

How does one make a transparent gradient of a shape in Keynote—a shape that is completely opaque on one side and completely transparent on the opposite side?

Draw then select the shape
Inspector > Format > Style > Fill > Advanced Gradient Fill (the Inspector is the side panel on the right)
Click on one of the two colour fill sliders to show the Colour Wheel
Drag the Opacity slider all the way down
lastly, in the advanced gradient fill, drag the colour fill slider that has the transparency set, drag the slider towards the centre to adjust the opacity from left to right

Similar Messages

PS 2014 Foreground to transparent (gradient problems)

Adobe Photoshop 2014
Files:
PSD                                Clock, Gradient line
DOCX, MHTML, PDF                   PS Foreground to transparent gradient
SWF                                2014-06-26_1509
PNG                                Clock (original), Clock (gradient), Clock (masked), PS 1, PS 2, PS 3
Foreground to transparent gradient
Foreground to Transparent will not work by simply clicking 'OK' and dragging mouse across a selected layer. This gradient tool is hyper sensitive, and unstable.
We tried to record the PS method for our gradient. Jing was our first choice, but Jing’s flash engine conflicts with the PS flash engine, blocking the gradient tool’s drag action. Jing can only record steps prior to the final drag-and-drop gradient action. Cam is rendered useless by HDR displays’ high resolution, causing glare white-out. Here is our visible work-flow.
>>
1. Select Gradient Tool on left toolbar, open tool group and select 'Foreground to transparent' tool.
Occasionally, next close and reopen PS 2014 (stubborn gradient problems).
>
When PS 2014 reopens, the specific gradient tool remains selected. This clears some aspects of the PS 2014 cache, which sometimes help.
Notice that selected left tool bar button momentarily changes to Eyedropper, when Gradient Editor opens! A hint of what follows.
2. Select a layer to apply gradient to, this selected layer is the gradient tool's "Foreground". However, gradient is applied in ‘reverse’ (see below, 5).
3. Panels bottom bar, click mask button to 'Add a layer mask', then ‘Filter for pixel layers’ and ‘Add a vector mask' -

This may also help!
                Using only Add layer mask may indiscriminately result the following:
- Stressing here the words "may indiscriminately"...
when PS 2014 is unstable, adding actions when Layer mask alone fails, may (often) be stabilizing enough to make gradient work...
once PS 2014 begins performing Foreground to transparent gradients, then simply begin creating new transparency gradients when PS 2014 re-opens,
or just click Add layer mask to get going again;
- Layer mask alone may suffice, or it may slightly penetrate underlying layers with partial transparency, and/or…
- May convert transparent background to a foreground 'Color to transparent' gradient in opposite direction to (reversed) Foreground to transparent gradient;
- Exact/intended layer vs. vector behaviors are unknown, though each provides unique creative applications, in isolation and when used together;
- Use a new PSD file dedicated just to Foreground to transparent gradient. This quickly resolves inevitable multiple layer-and-tool conflicts.
4. Layers panel top bars, click ‘Lock transparent pixels’ and then click 'Filter for pixel layers'. These actions help focus PS 2014 on the current work-flow. Though given this gradient’s obvious corruption, it cannot be said that any method is specific, or repeatable. We are now stepping beyond the sometimes sufficient Add layer mask, experimenting with gradient line attempts as we go.
5. Finally, we will drag from point A to point B in workspace, resulting gradient with greatest transparency at A-side of selected layer. Click workspace anywhere and drag across selected layer: this creates a straight, dashed gradient line. When the mouse button is released at point B, the dashed line vanishes and the gradient is applied. Release mouse button where you want gradient to end. Note that the endpoint B inside of layer object will fade into opaque towards point B, right up to the B-side edge of the layer object. PS 2014 auto-renders an even gradient. Extending beyond object renders opacity curve with midpoint transparency closer to full opacity B-side of gradient line. This gradient tool, in its current structure, performs in reverse and should be renamed to Transparent to foreground: starting Point A is the transparent side of the gradient line!
6. Ctrl-Z or history to undo Foreground to transparent gradient (s). Experiment until it looks best. Multiple gradients can be applied from any direction. Occasionally, once PS 2014 has established effective (reversed) Foreground to transparent gradient behavior or behaviors (?... not sure what's going on there), then closing and reopening PS 2014, one can immediately begin to create new (reversed) Foreground to transparent gradients... without any masking or other workspace preparation!
Office 365 32-bit and PS 2014 64-bit conflict. When image pasted from PS into Word 365, Office pastes image as ‘Object’. Pasted object is distorted as square dimensions are vertically stretched 150% to offset square dimensions – e.g., 2px x 4px PS 2014 copied image layer becomes 2px x 6px Word image “Object”. Also, pasted objects cannot be formatted in any way. Re-sizing is not possible! This dimension distortion and formatting conflict does not arise in Office 64-bit; however, Microsoft will discourage (even withdraw support) as the bulk of corporate clients deploy Office as 32-bit software. PS 2014 is set to Maximize Compatibility.
- - Riverleaf digital publishing, summer 2014

CS4, Snow Leopard, and Transparency Gradients

Since upgrading to Snow Leopard I cannot make gradients in Photoshop that have transparency in them. They always come out as a solid color. Anyone else experiencing the same?

Hi
I'm new to the forums and I had asked a question to an expert and now I
get inundated with other messages not pertaining to my question. How, might I
stop this from happening?
Thanks,
Thomas
In a message dated 10/18/2009 7:23:55 P.M. Eastern Daylight Time,
[email protected] writes:
Yes!
I am definitely having the same problem, and I recently upgraded to
Leopard. - Very frustrating!
I have tried resetting my gradients. I find that all the gradients
containing transparency (even the default ones, say 'Transparent Stripes'), have
lost their transparency. Even in the little preview bar the transparency
is not visible, and it certainly doesn't work when applying the tool.
Any help regarding this issue would be much appreciated.
I'm running Photoshop CS4 on a Macbook Pro, bought earlier this year.
Henry.
'Photoshop transparent gradient problem snow leopard'.

Probelms with PS CS5 - Cant add a transparent gradient layer mask to a layer - please help

My company just upgraded us to cs5 on our macs. I was working along in photoshop & dont know if I hit something inadvertently or what but all of a sudden I cannot add a black to transp gradient to a layer mask. Ive searched around even saved out and re-loaded the gradients from my pc (which has the black to transparent gradient in the gradient editor & the process works fine).
Funny thing is that in the mac gradient picker, the black to transparent gradient is black and solid white but the name of it is 'black to transparent' in the editor. Ive tried
I guess my questions would be how would one make a transparent gradient, or how would one reset the gradients to default becuase every time i delete all the gradients the add a new .grd file from my pc, it still does not show the gradient.
Its amazing how such a small thing like this saves so much time and its eating me up that I cant get this to work
Thanks in advance, Mark

C:\Users\User\AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings
This is where I finally found the prefs.psp file. At least this is the way my Vista machinie is set up. Your "User" config may be diferrent from mine.
But, Thanks for the right answer!. My transparent layer is now only showing the faint gray checkboard instead of black.
Rob_L

Multiple Transparent Gradients to photo

I so hope someone an respond on line right now. I have searched to find how to apply a second or third transparent gradient to a photo to blend it with another photo. I thought I remembered how to do it in CS 3. I am on Windows CS5 Photoshop and have applied one gradient. I thought you somehow commit that layer mask in then add a new one so you can continue blending the photo. However cannot find a command that works under the file at tp that reads layers and cannot therefore continue to create transparent blending. Please tell me what I am missing. This is a key tool to feeling comfortable to buying CS 5. I will await to see who responds if I can. Thanks in advance. Anita

Mylenium, it is a placed photo as a layer. Once I use the tool in one area on the mask, I cannot go elsewhere on the photo to create additional gradients to the photo without undoing. I was using the Black/white. While this may be part of the issue, in CS3 it seems you had to commit the first gradient task before moving to additional gradients to the photo elsewhere on it. I take you are saying I can make multiple gradients as long as it is not fixed. So pperhaps I need to know what you mean by fixed. I hope I make since. See below another persons response. Right now I get stuck one gradient undoing another. I will return. ::)

Dark to Transparent Gradient?

Hi everyone! I've had the hobby of graphic design for a while now. Recently, I've been trying to recreate things like flyers and websites for entertainment. Sadly, I've run into a slight problem.
I'm currently trying to recreate a professional photobooth flyer. I'm having trouble recreating the dark to transparent gradient in the footer. Here's the original flyer: http://i.imgur.com/CMDbr.png.
Whenever I try to recreate this effect, it ends up being very sudden and unappealing. Here's an example (note that it is unfinished, leaving some areas white): http://i.imgur.com/ned6i.jpg
Is there any better way of doing this gradient effect (or does it even need to be fixed, for that matter?).
Any other suggestions about the flyer are welcome. Thanks!

An option is to use a Shape with feather applied to its mask. Here's a black Shape layer (opacity 97%) with a subractive ellipse. See Feather in Properties panel.

Transparency gradient over pictures

How do I put a transparency gradient over a picture so that the picture slowly fade to transparency?

Double click to make the BG layer into a normal layer with no lock
Add a layer mask
Run a black to white gradient down the layer mask

Illustrator CS6 to CS4: White lines along edges of semi-transparent gradient meshes

Hi,
I recently invested in CS6 Production Premium and I've just tested legacy support by saving an Illustrator CS6 image in CS4 format.
The image contains a number of semi-transparent gradient meshes used for highlights.
Having loaded the saved CS4 .ai file in CS6, white lines appear along my semi-transparent gradient meshes (see the attached screenshot).
What's happening is that the anchor points with 0% opacity in CS6 suddenly have 100% opacity when I load the saved CS4 files in CS6.
Is this a known error?
If so, how/where do I report it?
Here are the relevant CS6 and CS4 files:
http://snk.to/f-chcig8s9
P.S. There are no white lines when I save the image in CS5 format and load it in CS6.

The image contains a number of semi-transparent gradient meshes used for highlights.
CS4 doesn't support semi-transparent gradient meshes. So they are simulated by using opacity masks. The masks are generated atuomatically from the meshes in the file, so they have the exact same size, which causes the fringes. If you would create this manually, you would make the opacity mask slightly larger in order to avoid fringes.

How to create transparency gradient

Hi
please share how to create transparency gradient
have attached the example

qanibh,
In the newest version(s), you may specify opacity values for the Gradient Fill.
In older versions,, you may:
1) Create the shape with the solid end colour upon the seethrough background;
2) Copy to the front, apply a gradient to the copy, and in the Transparency palette/panel flyout Make Opacity Mask, setting Clip and Invert as wished.

Creating transparent backgrounds in Keynote for export as titles in FCP

I am creating titles in Keynote and exporting them into Final Cut. I was wondering if anyone knows how to make transparent backgrounds so I can overlay the titles on videos. I have tried "include transparency" but have been unsuccessful. I haven't found any help files to address this situation.
Many thanks

1. make sure your slide background is set to NONE, no color, no image
no nothing
2. Check the Include Transparency check box when you choose the
QuickTime export
3. Choose Custom from the formats pop-up
4. Click the Settings button
5. Choose Animation or PNG from the pop-up (it probably says Sorenson)
6. Choose Millions of Colors+ from the depth pop-up
Make any other quality or frame settings, and export it. You SHOULD get
a movie that has a transparent background.

Colour to transparent gradient in Illustrator CS2

I am creating a logo in Illustrator CS2 and i want to put a reflection
underneath, that has a gradient fading to transparent. It can be done but the logo needs to be used in other programs such as InDesign. When placed into InDesign the transparency of the gradient is no longer there, it changes to white.
Is there any way to do this?
thanks Tim

Try using a transparency mask: http://livedocs.adobe.com/en_US/Illustrator/13.0/help.html?content=WS2D8B6C1E-A2C8-4902-8 9C8-E5D04A6B314B.html

Transparent gradient in table cell

When I try to fill a table cel with a feathered gradient that has transparent areas in it, the gradient turns opaque in the table cell. I've also tried anchoring a shape with a gradient into a table cell, and again the transparent areas turn opaque.
Is there a workaround to fill a table cell with a gradient that has transparent areas in the gradient?

Corrigendum:
If one is aware that the gradient, even when applied to a cell, takes in reference the entire table, then yes, it is possible!
The shadow on the table is a little gift from Obi-wan!

Is there no gaussian blur transparency feature in keynote?

In keynote, you can make a shape transparent, but I also want to add a gaussian blur. I could have sworn this was a feature in keynote, but I can't seem to find it. Please tell me it exists, it's such a sleek effect and it would be a total shame if the Yosemite still hasn't added this feature. Currently on OS X Yosemite 10.10 with the newest version of Keynote (V. 6.5)

This used to be possible in the old version of Keynote. When you selected an image and went to the image properties, you could move the Sharpness drawer from the center to the left, thus creating a gaussian blur. In the current version the drawer is already on the left, so you could only sharpen the image.
It could be a bug, although one which has existed from the moment on they release the new Keynote back in 2013.

Missing "foreground to transparent" gradient in Elements 8

I could have sworn it was there yesterday but, I can't find, "foreground to transparent"!
1. How can I get it back?
2. Where did it go?
(I know where it is SUPPOSED to be, it's just not there)
Thanks!

From the gradient flyout menu, choose either Reset Gradients or Default.
MTSTUNER

Transparent Gradient Adjustment Layer

I would like to create an adjustment layer (so I can easily tweak it later) that creates the exact same effect as a gradient tool in the follwing example. I for the life of me can't figure out how to do it, maybe it's just not possible...
Using the gradient tool to create a mask I can easily get this result (note the gradient fades the image but maintains a transparent background):
Using a gradient adjustment layer I am forced to choose a color (white to transparent) and I get this:
I want the the former (transparent fade) so I can easily drop it over any color background later, but I want to later so I can easily adjust the % of fade later.
Is there any way to make a gradient adjustment layer fade to transparent? I thought maybe some combination of layer blending would accomplish it, but haven't been able to figure it out. I'm trying to keep it simple, but it's ok if the solution is a little complicated as I plan to automate it into an action that'll be applied to dozens, maybe hundreds, of images.

»Is there any way to make a gradient adjustment layer fade to transparent?«
Obviously, because that’s what Your gradient is – white from 100% opacity to 0%.
Transparency is a feature of the layer, its blending settings, clipping masks, any masks applied to it or the containing groups … – so it cannot be added »on top«, as You seem to assume.
If I understand correctly You want to use it as a mask for another layer.
One way to achieve that would be to place the gradient (X% opacity to Y%) below the layer You want to mask, convert it to a Smart Object (or rasterize it), set its Fill to 0%, turn off Blend Clipped Layers as a Group in the Blending Options and create a Clipping Mask (alt-click on the line between the gradient and the layer above in the Layers Panel).
Changing the fade would then necessitate opening the SO and making the changes there, so convenience-wise that’s not so great.
But maybe someone else has a better idea.
Incidentally: Your screenshot seems to indicate that You don’t make use of Smart Objects to automatically update the »reflection« with the upper object and You might want to consider it.

Transparent gradient in Keynote?

Similar Messages

Maybe you are looking for